Professional Documents
Culture Documents
Minolta G600
Minolta G600
Minolta G600
Check the packing list before using this product. If any items are missing, immediately
contact your camera dealer.
Konica Minolta is a trademark of Konica Minolta Holdings, Inc. DiMAGE is a trademark of Konica
Minolta Photo Imaging, Inc. Apple, Macintosh, and Mac OS are registered trademarks of Apple
Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation. The
official name of Windows is Microsoft Windows Operating System. Pentium is a registered trademark
of the Intel Corporation. Power PC is a trademark of the International Business Machines Corporation.
QuickTime is a trademark used under license. Memory Stick is a trademark of Sony Corporation. All
other brand and product names are trademarks or registered trademarks of their respective owners.
2 BEFORE YOU BEGIN
FOR PROPER AND SAFE USE
Lithium-ion batteries
This camera operates on a small, but powerful lithium-ion battery. Misuse or abuse of the
lithium-ion battery can cause damage or injury through fire, electric shock, or chemical
leakage. Read and understand all warnings before using the battery.
DANGER
• Do not short, disassemble, damage, or modify the battery.
• Do not expose the battery to fire or high temperatures over 60°C (140°F).
• Do not expose the battery to water, or moisture. Water can corrode or damage the inter-
nal battery safety devices and cause the battery to overheat, ignite, rupture, or leak.
• Do not drop or subject the battery to strong impacts. Impacts can damage the internal
battery safety devices and cause the battery to overheat, ignite, rupture, or leak.
• Do not store the battery near or in metallic products.
• Do not use the battery with any other products.
• Only use the specified charger. An inappropriate charger may cause damage or injury
through fire or electric shock.
• Do not use a leaking battery. If fluid from the battery enters your eye, immediately rinse
the eye with plenty of fresh water and contact a doctor. If fluid from the battery makes
contact with your skin or clothing, wash the area thoroughly with water.
• Only charge the battery in an environment with ambient temperatures between 0° and
40°C (32° and 104°F). Use the battery only in an environment with ambient tempera-
tures between 0° and 50°C (32° and 122°F). Store the battery in an environment with
ambient temperatures between –20° and 35°C (–4° and 95°F) and a humidity of 45%
to 85% RH.
WARNING
• Tape over the lithium-ion battery contacts to avoid short-circuiting during disposal;
always follow local regulations for battery disposal.
• If charging is not completed after the specified period elapses, unplug the charger and
discontinue charging immediately.
3
GENERAL WARNINGS AND CAUTIONS
Read and understand the following warnings and cautions for safe use of the digital
camera and its accessories.
WARNING
• Only use the battery specified in this manual.
• Only use the specified charger or AC adapter within the voltage range indicated on the
unit. An inappropriate adapter or current may cause damage or injury through fire or
electric shock.
• Only use the charger power cord in the sales region for which it was designed. An inap-
propriate current may cause damage or injury through fire or electric shock.
• Do not disassemble the camera or charger. Electric shock may cause injury if a high
voltage circuit inside the product is touched.
• Immediately remove the battery or unplug the AC adapter and discontinue use if the
camera is dropped or subjected to an impact in which the interior, especially the flash
unit, is exposed. The flash has a high voltage circuit which may cause an electric shock
resulting in injury. The continued use of a damaged product or part may cause injuries
or fire.
• Keep the battery, memory card, or small parts that could be swallowed away from
infants. Contact a doctor immediately if an object is swallowed.
• Store this product out of reach of children. Be careful when around children not to harm
them with the product or parts.
• Do not fire the flash directly into the eyes. It may damage eyesight.
• Do not fire the flash at vehicle operators. It may cause a distraction or temporary blind-
ness which may lead to an accident.
• Do not use the monitor while operating a vehicle or walking. It may result in injury or an
accident.
• Do not look directly at the sun or strong light sources through the viewfinder. It may
damage your eyesight or cause blindness.
5
CAUTION
• Do not use or store these products in a hot or humid environment such as the glove
compartment or trunk of a car. It may damage the camera, charger, and battery which
may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid.
• If the battery is leaking, discontinue use of the product.
• The camera, charger, and battery temperature rises with extended periods of use. Care
should be taken to avoid burns.
• Burns may result if the memory card or battery is removed immediately after extended
periods of use. Turn the camera off and wait for it to cool.
• Do not fire the flash while it is in contact with people or objects. The flash unit dis-
charges a large amount of energy which may cause burns.
• Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and
the liquid from the monitor may cause inflammation. If liquid from the monitor makes
contact with skin, wash the area with fresh water. If liquid from the monitor comes in
contact with the eyes, immediately rinse the eyes with plenty of water and contact a
doctor.
• When using the AC adapter and charger, insert the plug securely into the electrical out-
let.
• Do not use electronic transformers or travel adapters with the charger. The use of these
devices may cause a fire or damage the product.
• Do not use if the AC adapter or charger cord is damaged.
• Do not cover the AC adapter or charger. A fire may result.
• Do not obstruct access to the AC adapter or charger; this can hinder the unplugging of
the units in emergencies.
• Unplug the AC adapter or charger when cleaning or not in use.
This mark on your camera certifies that this camera meets the requirements of the
EU (European Union) concerning interference causing equipment regulations. CE
stands for Conformité Européenne (European Conformity).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation. Changes or modifications
not approved by the party responsible for compliance could void the user's authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
7
TABLE OF CONTENTS
The getting up and running section covers how to prepare the camera for use. It contains
important information about power supplies and memory cards. The basic operation of
this camera is covered in the recording - basic operation section between pages 22 and
30, and the playback - basic operation section between pages 32 and 34. Read the data-
transfer mode section in its entirety before connecting the camera to a computer or
printer.
Many of the features of this camera are controlled with menus. The menu navigation
sections concisely describe the menu. Descriptions of the settings immediately follow the
navigation sections.
The appendix contains a troubleshooting section to help answer questions about the
operation of the camera. Information covering camera care and storage is also provided.
Please store this manual in a safe place.
10 TABLE OF CONTENTS
Data-transfer mode ..............................................................................................................................83
System requirements...............................................................................................................83
Connecting the camera to a computer ....................................................................................84
Connecting to Windows 98 and 98SE.....................................................................................85
Automatic installation ..................................................................................................85
Manual installation ......................................................................................................86
Memory card folder organization.............................................................................................88
Disconnecting the camera from the computer ........................................................................90
Windows 98 and 98SE ...............................................................................................90
Windows Me, 2000 Professional, and XP ..................................................................90
Macintosh....................................................................................................................91
PictBridge ................................................................................................................................92
Notes on printing errors...........................................................................................................94
QuickTime system requirements .............................................................................................94
Changing the memory card - data-transfer mode ...................................................................95
Appendix ....................................................................................................................................96
Troubleshooting .......................................................................................................................96
About the lithium-ion battery charger cord ..............................................................................97
Removing the driver software - Windows................................................................................98
Care and storage.....................................................................................................................99
Camera care ...............................................................................................................99
Cleaning......................................................................................................................99
Storage .......................................................................................................................99
Memory cards ...........................................................................................................100
Batteries....................................................................................................................100
Before important events or journeys.........................................................................100
Operating temperatures and conditions ...................................................................101
LCD monitor care......................................................................................................101
Copyright...................................................................................................................101
Questions and service ..............................................................................................101
Technical specifications .........................................................................................................102
11
NAMES OF PARTS
* This camera is a sophisticated optical instrument. Care should be taken to keep these
surfaces clean. Please read the care and storage instructions in the back of this manual
(p. 99).
Shutter-release button
Flash (p. 28) Microphone
Viewfinder window*
Lens cover / Main switch
Flash sensor
Lens*
Tripod socket
12 NAMES OF PARTS
Playback button (p. 32)
Display button (p. 27, 33)
Delete button (p. 33)
Viewfinder*
Indicator lamps
Zoom buttons (p. 23)
Strap eyelet
(p. 20)
13
GETTING UP AND RUNNING
CHARGING THE BATTERY
Before the camera can be used, the lithium-ion battery must be charged. Before charging
the battery, read the safety warnings on pages 3 and 4 of this manual. Only recharge the
battery with the supplied battery charger. The battery should be recharged before each
shooting session. See page 100 for battery care and storage.
3
With the contacts down, slide the battery
2 into the charger (2). The indicator lamp (3)
is red when the battery is charging. The
lamp turns green when the battery has
been charged. Charging time is
approximately 120 minutes.
When the battery has been charged, remove the it from the charger. Unplug the power
cord from the outlet.
Camera notes
After initially inserting a charged battery, do not remove it from the camera for three hours; the
camera can be off during this period. The lithium-ion battery is used to charge an internal battery,
which protects settings when the camera is turned off.
15
BATTERY-CONDITION INDICATOR
This camera is equipped with an automatic battery-condition indicator. It is displayed in
the bottom left corner of the LCD monitor when the camera is on.
17
INSTALLING AND REMOVING A MEMORY CARD
Always turn off the camera and
confirm the indicator lamps are out
before changing the memory card,
otherwise the card may be damaged,
and data lost.
An SD Memory card, MultiMediaCard, or
Memory Stick must be inserted for the
camera to operate. If a card has not been
inserted, a no-card warning appears on the
LCD monitor.
1
Slide the battery-chamber door toward the
side of the camera to release the safety
catch (1). Open the door.
19
TURNING THE CAMERA ON AND OFF
Slide the lens cover in the direction indicated to
turn on the camera; the lens extends
automatically. Do not touch or hinder the lens
while it is extending.
YES NO
21
RECORDING MODE - BASIC OPERATION
This section covers basic recording operation. To prepare the camera for use, read pages
14 through 21.
Take care not to cover the lens, flash, or flash sensor with your fingers
or the strap.
Camera Notes
Because the optical viewfinder and the lens are slightly separated, the image seen through one is
not exactly the same as the other; this is called parallax. Parallax can cause errors in framing when
using the viewfinder at close distances. When the subject is closer than 1m (3ft) at the lens’ wide-
angle position or 3m (9.8ft) at the telephoto position, use the monitor to compose the image.
CAMERA-SHAKE WARNING
If the shutter speed is below the point where the camera can be hand
held safely, the red viewfinder indicator lamp blinks to warn of
camera-shake. Camera shake is slight blurring caused by subtle
hand motion and is more pronounced at the lens’ telephoto position
than at the wide-angle position. Although the warning appears, the
shutter can be released. If the warning appears, place the camera on
a tripod or use the flash. Warning is not used with manual exposure.
23
BASIC RECORDING OPERATION
Place the subject within the AF area.
Place the subject within the AF area. Press and hold the
shutter-release button partway down and wait for the green
viewfinder indicator lamp to glow to indicate the focus is
locked. If the green lamp blinks, repeat the procedure.
FOCUS RANGE
The focus range depends on the zoom position. To focus closer than the distances below,
use the macro focus mode (p. 30).
25
FOCUS SIGNALS
This digital camera has a quick, accurate autofocusing system. The green indicator lamp
next to the viewfinder indicates the focus status. The shutter can be released regardless
if the camera can focus on the subject or not.
The subject is too dark. The subject in the AF The subject is com- The subject is near a
area is low in con- posed of broad very bright object or
trast. horizontal lines. area.
Camera Notes
The fixed focus modes can be used when a special focusing situation is preventing the camera
from focusing. These modes are activated with custom option in the setup menu (p. 77) and set
with the controller (p. 30).
Monitor
off
When changing settings, the monitor turns on automatically. The warnings and other
relevant information can appear on the live image only display. The digital zoom is
canceled when the monitor is off.
27
FLASH MODES
The flash can be used when taking still
images. To select the flash mode, press the
right key of the controller (1) until the
appropriate mode is displayed. The active
flash mode is displayed in the top left
corner of the LCD monitor.
1
Autoflash - the flash fires automatically in
low-light conditions.
Camera Notes
The slow-sync. option in the recording menu specifies the minimum shutter speed used with a
particular flash mode to control camera shake. See page 48 for more information. The custom
option in the setup menu (p. 77) allows the available flash modes to be edited.
FLASH SIGNALS
The red indicator lamp next to the viewfinder indicates the status
of the flash. When the lamp glows, the flash is charging and will
be used in the exposure.
29
FOCUS MODES AND SELF-TIMER
Macro and landscape focus modes as well
as a self-timer can be selected by pressing
the left key of the controller (1) until the
appropriate mode is displayed. The active
mode is displayed in the top left corner of
the LCD monitor.
1
Macro - used for close-up photographs.
The minimum subject distance changes
with the zoom position of the lens.
Wide-angle position Telephoto position
6cm (2.4in) - ∞ 50cm (19.7in) - ∞
Macro
If the subject is outside the flash range (p.
51), overexposure may result. To prevent Landscape
the flash from firing, set the flash mode to
flash cancel (p. 28). Self-timer
Always use the monitor to frame the image.
The use of a tripod is recommended. Macro Macro / Self-timer
can be used with the self-timer, see below.
Landscape / Self-timer
Landscape - focus is optimized for scenic pictures. The use of a tripod is recommended
in in twilight or overcast conditions as shutter speeds can be long. The flash is canceled
with this focus mode. Landscape can be used with the self-timer.
Shooting Tips
Camera shake is more noticeable with long exposures or close-up pictures. In these situations,
place the camera on a tripod and make the exposure with the self-timer to prevent shaking the
camera.
Camera Notes
The custom option in the setup menu (p. 77) allows the available focus and self-timer modes to
be edited. Three fixed focus modes can also be activated: 4m (13ft), 2m (6.6ft), and 1m (3.3ft).
DELETING IMAGES
To delete a file, press the delete button. A confirmation
screen appears.
Use the left/right keys to highlight the
appropriate option. “THIS” deletes the
displayed image and “ALL” deletes all images
in the memory location at the top of the display.
DELETE “CANCEL” ends the delete operation.
THIS CANCEL ALL
Press the menu button to complete the
operation.
31
PLAYBACK - BASIC OPERATION
Images are viewed in the playback mode. This section covers the
basic playback operation. The playback mode has additional
functions, see page 55.
DELETING IMAGES
To delete a displayed file or all files in the memory
location indicated at the top of the image, press the
delete button. A confirmation screen appears.
Use the left/right keys to highlight the
appropriate option. “THIS” deletes the
displayed image and “ALL” deletes all
images in the memory location at the top of DELETE
the display. “CANCEL” ends the delete THIS CANCEL ALL
operation.
33
INDEX PLAYBACK
To view the recorded images in a 9-frame
index, press the wide-angle zoom button
(1). The images are grouped by the
memory card which is indicated on the first 1
frame of the group. The frame number of
the image is displayed.
ENLARGED PLAYBACK
An image can be enlarged; maximum
magnification depends on image size. To
enlarge the displayed image, press the
telephoto zoom button (1). 1
Use the zoom buttons (2) to enlarge and
reduce the image size; the degree of
magnification is displayed. The controller 2
(3) scrolls the image.
Controller
Menu button
35
RESOLUTION - IMAGE SIZE AND COMPRESSION
Image size and the compression rate are set with the resolution option in the recording
menu. See navigating the recording menu section on page 35.
Changing image size affects the number of pixels in each image. The greater the image
size, the larger the file size. Choose image size based on the final use of the image -
smaller images are more suitable for web sites whereas larger sizes produce higher
quality prints.
Compression affects the file size and image detail. Normal compression is sufficient for
most uses. Fine makes higher quality image, but file sizes are larger.
If image resolution is changed, the frame counter displays the approximate number of
images that can be recorded at that setting on the installed memory card. The number of
images that can be stored on a memory card is determined by the size of the card and
the file size of the images, however no more than 999 images can be recorded on one
memory card. The actual file size is determined by the scene; some subjects can be
compressed further than others.
Approximate file sizes.
Size 2816 X 2112 2272 X 1704 1600 X 1200 640 X 480
Quality
Fine 2500KB 1600KB 800KB 200KB
Normal 1500KB 800KB 400KB 100KB
Approximate number of images that can be stored on a 16MB memory card.
Fine 5 8 16 66
Normal 8 16 33 133
Camera Notes
The frame counter indicates the approximate number of images that can be stored on the memory
card at the camera’s resolution settings. If the settings are changed, the frame counter adjusts
accordingly. Because the counter uses approximate file sizes, the actual image taken may not
change the counter or may decrease it by more than one. When the frame counter displays zero,
it indicates no more images at the image size and compression settings can be captured.
Changing those settings may allow more images to be saved to the card.
37
MOVIE RECORDING
This camera can record up to 30 seconds 320x240 of digital video with sound at
approximately 180KB/s. Movie recording is activated with the recording menu, see the
navigating the recording menu section on page 35. The digital zoom cannot be used and
the monitor cannot be turned off.
Place the subject in the center of the monitor and press the
shutter-release button partway down to lock focus (1).
Press the shutter-release button all the way down and
release to begin recording.
Take care not to cover the microphone while recording. Recording time
During recording, focus is locked and the optical zoom is
disabled. The writing speed of the memory card may
prematurely end the recording of a movie clip
39
WHITE BALANCE
White balance is the camera’s ability to make different types of lighting appear neutral.
One automatic and four preset white-balance setting are available. White balance is set
in the recording menu (p. 35).
The automatic white balance compensates for the color temperature of a scene. Auto
white balance is sufficient in most cases.
WHITE BALANCE
Use the up/down keys to select the new setting. SET AUTO
DAYLIGHT
Press the right key or menu button to complete CLOUDY
the operation. The left controller key cancels the
operation. CANCEL SET
Center-weighted metering: measures luminance over the entire image area with
emphasis to the central region. This metering mode give accurate exposures in almost
all situations.
Spot metering: uses the AF area to calculate the exposure.
Spot metering allows precise exposure measurements of a
particular object without being influenced by extremely bright
or dark areas within the scene.
41
MONOCHROME
Monochrome creates black and white images. The B&W mode produces neutral
monochrome images. Sepia creates warm-tone monochrome images. This mode is set
in recording menu (p. 35). The live image on the monitor reflects the selected mode. The
monochrome mode has no effect on image file size.
Use the up/down keys to select the new setting. DIGITAL ZOOM
SET ON
OFF
Press the right key or menu button to complete
the operation. The left controller key cancels the
operation. CANCEL SET
Magnification
43
ADJUSTING THE MONITOR
The monitor brightness and color can be adjusted with the recording menu (p. 35) or
playback menu (p. 56).
Level
Press the menu button to complete the operation. Brightness and color
channels
SD
Press the shutter-release button to start recording; the
recording time is displayed on the monitor. The recording VOICE
stops when the shutter-release button is pressed again or SHUTTER SW : STOP
the recording time has elapsed. 00:05
Recording tips
When making audio recordings, be careful not to touch or cover the microphone. The quality of
the recording is proportional to the subject to microphone distance. For best results, hold the
camera approximately 20cm (8in) from your mouth.
45
ADD AUDIO RECORDING
Approximately 30 seconds of audio can be attached to a still image. This function is
activated with the recording or playback menu. See the navigating the recording menu or
playback menu sections on page 35 or 56.
SD
Press the shutter-release button to start recording; the ADD REC
recording time is displayed on the monitor. The recording
SHUTTER SW : STOP
will stop when the shutter-release button is pressed again
or the recording time has elapsed. 00:05
RETURN : SET
To delete the audio track, press the delete button.
A confirmation screen appears.
Audio indicator
Use the left/right keys to highlight the appropriate SD
option. “THIS” deletes the audio track from the ADD REC
displayed image and “ALL” deletes all audio
SHUTTER SW : START
tracks attached to all still images in the memory
location at the top of the display. “CANCEL” ends 00:00
the delete operation. DELETE
THIS CANCEL ALL
Press the menu button to complete the operation.
47
SLOW SHUTTER LIMIT
The minimum shutter speed used for automatic exposures can be specified. This function
is located on the recording menu, see the navigating the recording menu section on page
35.
Press the up key to switch the functions changed with the controller between
manual exposure and the flash/focus modes.
When using the auto ISO setting (p. 51), camera sensitivity is set to ISO 50. Autoflash
and Night Portrait cannot be used. The use of a tripod is recommended for long
exposures. Noise reduction is used automatically with exposures of 1/2 second or longer.
To cancel manual exposure, select the man-exposure option in the menu.
49
QUALITY
The quality option allows the camera sensitivity and flash compensation to be selected,
and the saturation, contrast, sharpness, and color of images to be adjusted. The color
settings also affect movies. This option is located on the recording menu, see page 35.
The flash range changes with camera sensitivity. Because of the optical system, the flash
range is not the same at the lens’ wide-angle position as it is at the telephoto position.
Flash compensation
Flash compensation increases or decreases the flash exposure of the built-in flash in
reference to the ambient exposure by as much as ±1 Ev. See page 54 for more on Ev.
When using fill-flash to reduce harsh shadows caused by direct sunlight, flash
compensation changes the ratio between the highlights and shadows. By decreasing the
flash output with a negative Ev setting, the shadows receive less light and are deeper.
Using a positive Ev setting will soften or eliminate shadows.
51
Saturation
Saturation controls how vivid the colors of an image are. Saturation can be set in five
levels with the quality option in the recording menu (p. 50).
Contrast
Contrast controls the tonal ratio of an image. Contrast can be set in five levels with the
quality option in the recording menu (p. 50).
Sharpness
Sharpness accents or softens details in an image in five levels with the quality option in
the recording menu (p. 50). Any changes made are applied to the live image, but may be
difficult to see. However, when viewed with a computer, the changes are evident.
Normal
52 RECORDING - ADVANCED OPERATION
Color
The red, green, and blue color channels can be adjusted in five levels with the quality
option in the recording menu (p. 50). Any changes made are applied to the live image.
AN INTRODUCTION TO COLOR
In photography, red, green, and blue are RED
the primary colors. The secondary colors,
cyan, magenta, and yellow, are made from
combining the primary colors: cyan = blue MAGENTA YELLOW
+ green, magenta = blue + red, and yellow
= red + green. The primary and secondary
colors are grouped in complementary
pairs: red and cyan, green and magenta,
and blue and yellow. BLUE GREEN
Knowing the complementary colors is very
important in color balancing. If the image CYAN
has a specific color cast, either subtracting
the color or adding its complementary
color will create a natural looking image. Increase Image is too: Decrease
Blue + Green Red Red
Adding or subtracting equal parts of red, Blue + Red Green Green
green, and blue have no affect on the color Red + Green Blue Blue
balance. However, changing two colors Red Cyan Blue + Green
equally has the same affect as the
opposite change with one color; +2 green Green Magenta Blue + Red
and +2 red is the same as -2 blue. The Blue Yellow Red + Green
greatest change in a specific color comes
by setting the color channels to their
opposite extremes. To make an image as
blue as possible, set the color channels to
+2 blue, -2 red, and -2 green.
53
A SHORT GUIDE TO PHOTOGRAPHY
Photography can be a rewarding pursuit. It is a broad and disciplined field that can take
years to master. But the pleasure in making photographs and the joy of capturing a
magical moment cannot be compared. The guide is an introduction to some basic
photographic principles.
The zoom lens not only affects how large the subject is in
the picture, but it also influences the depth of field and
perspective. Depth of field is the area between the
closest object in focus and the furthest object in focus. As
the lens zooms in to the telephoto position, the depth of
field becomes shallower, separating the subject from the
background. Many portraits are taken with telephoto
lenses. Zooming the lens out to the wide-angle position
makes both the foreground and background appear
sharper. Usually landscape photographs take advantage
of the large depth of field of wide-angle lenses.
WHAT IS AN EV?
Ev stands for exposure value. A change +2.0 Ev 4X as much light
of one Ev adjusts the exposure by a +1.0 Ev 2X as much light
factor of two. Calculated exposure
–1.0 Ev 1/2 as much light
–2.0 Ev 1/4 as much light
55
NAVIGATING THE PLAYBACK MENU
Navigating the menu is simple. The menu button turns the menu on. The controller
moves the cursor and changes settings on the menu. Pressing the menu button selects
menu options and sets adjustments.
Controller
Menu button
The following indicators Repeat until all required files are selected.
may be displayed:
Use the controller to highlight the “END” frame.
Movie file
Audio track attached
Voice recording Press the menu button to complete the operation
or the shutter-release button to cancel it. A
confirmation screen opens.
INDEX
the index playback display can be opened from the
playback menu. See page 34 for more on index
playback. INDEX
COPY
57
COPY
Files can be copied between memory cards. Two memory cards must be in the camera
to select this playback menu option. Before using the copy routine, confirm that the
destination card has sufficient free memory.
The copy option specifies the source and destination cards; SD for a SD Memory card or
MultiMediaCard, and MS for a Memory Stick. The unit option specifies whether some
(SELECT) or all (ALL ON) files are copied.
If the destination card runs out of memory when files are being copied, the memory-full
message is displayed. Confirm which files were copied and repeat the operation with a
new destination card.
59
DELETE
Deleting permanently erases the file. Once deleted, a file cannot be recovered.
Care should be taken when deleting images.
Single, multiple, or all files on a specific memory card can be deleted with the playback
menu (p. 56). The delete function can only erase unprotected files.
The media option specifies the card from which the files are deleted; SD for a SD Memory
card or MultiMediaCard, and MS for a Memory Stick. The unit option specifies whether
some (SELECT) or all (ALL ON) files are deleted.
61
DPOF
The DPOF (Digital Print Order Format) allows direct printing of still images from digital
cameras. After creating the DPOF file, take the memory card to a photofinishing service
or insert it into the memory-card slot of a DPOF compatible printer.
UNIT SELECT
Press the right key or menu button to complete ALL ON
the selection. ALL OFF
CANCEL SET
The media option specifies the card from which the files are printed; SD for a SD Memory
card or MultiMediaCard, and MS for a Memory Stick. The unit option specifies whether
some (SELECT) or all (ALL ON) files are printed, or the DPOF file is canceled (ALL
OFF). The date option specifies whether the date and time of recording is printed with
each image (ALL ON) or not (ALL OFF).
62 PLAYBACK - ADVANCED OPERATION
Use the up/down keys to highlight the enter DPOF
option. MEDIA SD
UNIT SELECT
Press the right key or menu button to complete DATE ALL ON
the operation. The left controller key cancels the ENTER
DPOF routine. CANCEL SELECT
When using the date option, how and where the date is printed varies with the printer.
Not all printers can print the date and time
63
PROTECT
Important files can be protected. A protected file cannot be erased by any of the camera’s
delete functions. However, the formatting function (p. 71) will erase all files on a memory
card whether protected or not.
The media option specifies the card on which the files are protected; SD for a SD Memory
card or MultiMediaCard, and MS for a Memory Stick. The unit option specifies whether
some (SELECT) or all (ALL ON) files are protected; The ALL OFF option cancels the
protection on all files.
65
MOVE
Unprotected files can be moved from one memory card in the camera to another.
The move option specifies the source and destination cards; SD for a SD Memory card
or MultiMediaCard, and MS for a Memory Stick. The unit option specifies whether some
(SELECT) or all (ALL ON) files are moved.
If the destination card runs out of memory when files are being moved, the memory-full
message is displayed. Confirm which files were moved and repeat the operation with a
new destination card.
67
RESIZE
A still image can be resized to a VGA (640 X 480) or QVGA (320 X 240) JPEG copy so
that it may be easily transmitted by e-mail. The compression rate for resized images is
not displayed when played back. The resize function is on the playback menu (p. 56).
69
SETUP MENU
NAVIGATING THE SETUP MENU
The setup menu can be opened from either the recording menu or playback menu.
70 SETUP MENU
FORMAT
When a memory card is formatted, all data on the card is erased.
The formatting function is used to erase all data on a memory card. Before formatting a
memory card, copy the data to a computer or storage device. Protecting images do not
prevent them from being deleted when the card is formatted. Always format the memory
card using the camera; never use a computer to format a card.
Select the format option from the setup menu (p. 70).
A status bar is displayed and the red viewfinder lamp glows while the card is being
formatted. Never remove the card or battery during this period.
71
RECORDING MENU SETUP
A basic or detailed recording menu can be selected. Page 35 shows the detailed menu
options.
Select the rec menu option from the setup menu (p. 70).
DATE SETUP
The camera’s clock and calendar can be set. Select the date set option from the setup
menu (p. 70).
72 SETUP MENU
QUICK VIEW
Quick View plays back a still image for approximately three seconds after it has been
recorded.
Select the Quick View option from the setup menu (p. 70).
SELF-TIMER DELAY
The self-timer delay can be selected between 10 seconds and 3 seconds. The 3-second
self-timer mode is not canceled after the exposure. See page 30.
Select the self timer option from the setup menu (p. 70).
Select the sound option from the setup menu (p. 70).
SOUND
Use the up/down keys to highlight off or on.
EFFECT ON
OFF
Press the right key or menu button to complete
the operation.
CANCEL SET
Select the number-reset option from the setup menu (p. 70).
MEMORY PRIORITY
When two memory cards are used in the camera, memory priority specifies to which card
recorded images and audio are saved. When the card is full, the second card is then
used. When a single card is used, memory priority is set to that card automatically.
Select the memory-priority option from the setup menu (p. 70).
75
LANGUAGE
The language used in the menus can be changed. Select the language option from the
setup menu (p. 70).
Use the left/right keys to highlight “Yes.” “No” will LANGUAGE SET OK?
cancel the operation.
ENGLISH
Select the add rec set option from the setup menu (p. 70).
Select the custom option from the setup menu (p. 70).
77
CUSTOM SETUP NOTES
To set the custom-setup option, see the previous page.
Flash modes
This custom-setup option edits the flash modes available in the recording mode. One
flash mode must be left active. For more on flash modes, see page 28.
Three fixed focus modes can be added: 4m (13ft), 2m (6.6ft), and 1m (3.3ft). When
selected in the recording mode, the camera focus is locked at the specified distance. For
information on the focus and self-timer modes, see page 30.
AF AE AWB
This custom-setup option allows different functions to be assigned to the controller in the
recording mode.
Exposure compensation
78 SETUP MENU
White balance
In the recording mode, press the down controller key to change the white
balance. For more on white balance, see page 40.
AF (autofocus) lock
In the recording mode, press the shutter- 1
release button partway down to focus the
camera (1). While continuing to hold the
shutter-release button, press the left controller
key (2) to lock the focus; the AF lock indicator
is displayed at the top of the monitor. The focus
remains locked even after the exposure.
Repeat the procedure to cancel the AF lock. AF
lock is also canceled when the camera is
turned off or the menu or zoom button is
pressed. 2
AE (autoexposure) lock
In the recording mode, press the shutter- 1
release button partway down until the shutter
speed and aperture are displayed (1). While
continuing to hold the shutter-release button,
press the up controller key (2) to lock the
exposure; the AE lock indicator is displayed at
the top of the monitor. The exposure remains
locked even after the the picture is taken.
Repeat the procedure to cancel the AE lock.
AE lock is also canceled when the camera is
turned off or the menu or zoom button is 2
pressed.
79
Continuous-advance focus lock
A series of images can be captured by holding down the shutter-release button. This
option specifies whether the camera focuses between each frame of the series (OFF), or
fixes the focus with the first frame (ON).
RESET DEFAULT
This function resets the camera to its default settings. Select the default option from the
setup menu (p. 70).
Use the left/right keys to select “Yes.” “No” SETUP INITIAL OK?
cancels the operation
80 SETUP MENU
Slow shutter limit Off p. 48
Autoflash / Fill flash: 1/60
Slow shutter limit default p. 48
Flash cancel/Night Portrait: 1/8
Manual exposure Off p. 49
Quality Off p. 51
Camera sensitivity (ISO) Auto p. 51
Flash compensation 0.0 p. 51
Saturation 0 p. 52
Contrast 0 p. 52
Sharpness 0 p. 52
Color Red, green, and blue channels reset to 0. p. 53
Setup menu
Recording menu setup Details p. 72
Quick View Off p. 73
Information display setup On p. 82
Beep (Sound) On p. 74
Effect (Sound) On p. 74
Shutter (Sound) On p. 74
Self-timer delay 10 seconds p. 73
Auto power off 3 minutes p. 74
File-number reset Off p. 75
Memory priority SD p. 75
Add audio setup If selected p. 76
Flash modes (Custom) All on p. 78
Focus modes / Self-timer Macro, landscape, self-timer: on.
p. 78
(Custom) Fixed focus: off.
AF AE AWB (Custom) All off p. 78
Continuous-adv. focus lock Off p. 80
Transfer mode Data storage p. 82
81
TRANSFER MODE
The data-transfer mode must be specified depending on whether images are transferred
to a computer or printed directly. The data-storage option must be selected to transfer
data from the camera to a computer or when using the DiMAGE Viewer software. The
PictBridge option allows images to be printed directly from the camera with a PictBridge
compatible printer (p. 92).
Select the transfer-mode option from the setup menu (p. 70).
82 SETUP MENU
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Details on using
and installing the DiMAGE Viewer software are found in the supplied software manual.
The DiMAGE manuals do not cover the basic operation of computers or their operating
systems; please refer to the manual supplied with your computer.
SYSTEM REQUIREMENTS
For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 - 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~10.3.2.
Check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the
included DiMAGE Viewer CD-ROM (p. 85). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE G600 with a computer. The new software will have no affect
on the performance of older DiMAGE cameras.
A remote camera driver is supplied with the Windows edition of the DiMAGE Viewer. The
driver is not compatible with this camera.
83
CONNECTING THE CAMERA TO A COMPUTER
A fully charged battery should be used when the camera is connected to a computer. The
use of the AC adapter (sold separately) is recommended over the use of the battery. For
users with Windows 98 or 98SE, read the section on page 85 on how to install the
necessary USB driver before connecting the camera to a computer.
1.Insert the memory card into the camera. Confirm the memory-priority option in the
setup menu is set to the card type. To change the memory card while the camera
is connected to a computer, see page 95.
2.Turn off the camera.
3.Insert the small plug of the USB cable into the camera. Make
sure the plug is firmly attached.
4.Attach the other end of the USB cable to the computer’s USB port. Make sure the plug
is firmly attached. The camera should be connected directly to the computer’s USB
port. Attaching the camera to a USB hub may prevent the camera from operating
properly.
The camera turns on automatically when it is connected to a computer; both viewfinder
lamps light to indicate the connection. When using two cards in the camera, if the card
to be accessed is full, the camera may automatically switch the memory priority to the
empty card. Remove the empty card and confirm memory priority before connecting the
camera to a computer.
When the camera is properly connected to the computer, a drive icon, or volume,
appears in My Computer or on the desktop. The drive icon can be identified by the
camera name and memory card or as a removable disk. When using Windows XP or Mac
OS X, a window opens requesting instructions on what to do with the image data; follow
the directions in the window. If the computer does not recognize the camera, disconnect
the camera and restart the computer. Repeat the connection procedure above.
84 DATA-TRANSFER MODE
CONNECTING TO WINDOWS 98 AND 98 SE
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows or Macintosh operating systems.
Automatic Installation
Before connecting the camera to the computer, place the DiMAGE Viewer CD-ROM in
the CD-ROM drive. The DiMAGE installer menu should automatically activate. To
automatically install the Windows 98 USB driver, click on the starting-up-the-USB-device-
driver-installer button. A window appears to confirm that the driver should be installed;
click “Yes” to continue.
When the driver has
been successfully
installed, a window
appears. Click “OK.”
Restart the computer
and connect the camera
(p. 84) to complete the
operation.
85
Manual Installation
To install the Windows 98 driver manually, follow the
instructions in the connecting-the-camera-to-a-
computer section on page 84.
86 DATA-TRANSFER MODE
The add new hardware wizard will confirm the
location of the driver. The letter designating the CD-
ROM drive varies between computers. Click “Next”
to install the driver in the system.
87
MEMORY CARD FOLDER ORGANIZATION
Once the camera is connected to the computer, image and audio
files can be accessed by double clicking on icons. Image folders
are located in the DCIM folder. To copy images and audio
recordings, simply drag and drop the file icon into a location in
G600-SD the computer.
100KM017
88 DATA-TRANSFER MODE
Image and audio file names begin with “PICT” followed by a four-digit file number and a
jpg, avi, or wav extension. Audio files attached to still images have a wav extension and
the file number corresponds to their image file. Voice recordings also use the wav
extension.
When the file number exceeds 9,999, a new folder is created. The first three digits of the
folder name increase by one: e.g. from 100KM017 to 101KM017. “KM” stands for Konica
Minolta, and 017 indicates a DiMAGE G600 camera.
The file number may not correspond to the frame number of the image played back in
the camera. As images are deleted in the camera, the frame counter adjusts itself to
show the number of images on the card and reassigns the frame numbers accordingly.
The serial numbers used with image files do not change when an image is deleted.
Camera Notes
Image files contain exif tag data. This data includes the time and date the image was recorded as
well as the camera settings used. This data can be viewed with the camera or the DiMAGE
Viewer software. If a camera image is opened in a photo-retouching application like Adobe
Photoshop, and then the image is saved overwriting the original data, the exif tag information is
erased. When using software other than the DiMAGE Viewer, always make a backup copy of the
image files to protect the exif tag data.
To view images correctly on your computer, the monitor’s color space may need to be adjusted.
Refer to your computer manual on how to calibrate the display to the following requirements:
sRGB, with a color temperature of 6500K, and a gamma of 2.2. Changes made to the captured
image with the camera’s contrast and color-saturation controls will affect any color-matching
software in use.
89
DISCONNECTING THE CAMERA FROM A COMPUTER
Never disconnect the camera when data is being transferred between the camera
and computer,
When more than one external device are connected to the computer, repeat the
procedure above except right click on the unplug-or-eject-hardware icon. This opens the
unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
90 DATA-TRANSFER MODE
The hardware devices to be stopped is
displayed. Highlight the device by clicking on it
then click “Stop.”
Macintosh
Confirm that no data is being transferred between
the camera and computer and then drag the mass-
storage device icon and drop it into the trash.
Disconnect the USB cable.
91
PICTBRIDGE
Confirm the transfer-mode option in the setup
menu is set to PictBridge. Connect the camera
to a PictBridge compatible printer using the
camera’s USB cable. The larger plug of the
cable is connected to the printer. Insert the
smaller plug of the cable into the camera; the
camera turns on automatically and starts the
PictBridge connection.
Individual still images can be selected for printing on the PictBridge screen. When two
memory cards are in the camera, only the images on the card specified with the memory
priority option on the setup menu (p. 75) can be viewed.
Total number of prints
Number of copies Use the left/right keys of the controller to display
Image size the image to be printed.
Total: 3 2
Press the up key to select the number of copies
1600 to be printed. No more than 50 images can be
selected. To deselect an image for printing,
press the down key until the number of copies
reaches zero.
Repeat the previous steps until all the images to
:move :sel. :print
be printed are selected. Press the menu button
to continue.
92 DATA-TRANSFER MODE
Paper size Use the up/down keys of the controller to select
Printer setup 2” x 3” card the paper size. The options available depend on
L 100mmX150mm
the printer. The printer-setup option uses the
size set with the printer.
Postcard 4” x 6”
2L 8” x 10”
A4 Letter Press the menu button to begin printing.
:move :print
Total: 3 2
1600
Printing...
To cancel the print run once it begins, press the
menu button.
:cancel
Total: 3 2
1600
The printing-finished message indicates the end
of the print run. Press the menu button to
Printing finished.
complete the operation. Unplug the camera from
the printer.
:OK
Printing Notes
The following are the dimensions for postcard, L, and 2L paper sizes
in both millimeters and inches for your reference:
Postcard 100 X 148mm 3.9 X 5.9 in.
L 89 X 127mm 3.5 X 5.0 in.
2L 127 X 178mm 5.0 X 7.0 in.
93
NOTES ON PRINTING ERRORS
If a minor problem occurs during printing, such as the paper runs out, follow the
procedure recommended for the printer; no action is required for the camera. If a major
printer error occurs, press the menu button to end the routine. Refer to the printer manual
for the correct procedure for the printer problem. Check the printer settings before
starting again and use the PictBridge screen to deselect the images that were printed.
94 DATA-TRANSFER MODE
CHANGING THE MEMORY CARD - DATA-TRANSFER MODE
Never remove the card when data is being transferred between the camera and
computer - the data or memory card may permanently be damaged.
Macintosh
1. Stop the USB connection by dragging the drive icon into the trash (p. 91).
2. Disconnect the USB cable.
3. Change the memory card.
4. Reconnect the USB cable to remake the USB connection.
95
APPENDIX
Troubleshooting
The section covers minor problems with basic camera operation. For major problems or
damage, or if a problem continues to reoccur frequently, contact a Konica Minolta service
facility.
Memory-full Memory card is full and Insert a new memory card (p.
warning unable to store an image 18), delete some images (p.
appears on the at the resolution settings 33), or change the resolution
monitor. on the camera. settings (p. 36).
Shutter will
not release.
No-card warn-
No memory card in the
ing appears on Insert a memory card (p. 18).
camera.
the monitor.
While using
Move closer to the subject or
flash, the pic- The subject is beyond the flash range (p.
change the camera sensitivity
tures are too 51).
to a higher setting (p. 50).
dark.
96 APPENDIX
Make sure the subject is within
the autofocus range (p. 25) or
Subject is too close.
use the macro focus mode (p.
Green 30).
viewfinder indi-
cator lamp
blinks. A special situation is pre- Use the focus-lock function to
Pictures are venting the autofocus sys- focus on an object at the same
not sharp. tem from focusing (p. 26). distance as the subject (p. 25).
Pictures are
Slow shutter speeds Use a tripod, change the cam-
taken indoors
result in blurred images era sensitivity to a higher set-
or in low-light
when the camera is hand- ting (p. 50), or use the flash (p.
situations with-
held. 28).
out flash.
If the camera does not function normally, turn it off, remove and reinsert the battery, or
unplug and reconnect the AC adapter. Always turn the camera off otherwise the memory
card may be damaged and camera settings reset.
97
REMOVING THE DRIVER SOFTWARE - WINDOWS
1.Insert a memory card in the camera and connect it to the computer with the USB cable.
Other devices must not be connected to the computer during this procedure.
2.Right click on the My-computer icon. Select “properties” from the drop-down menu.
Windows XP: from the start menu go to the control panel. Click on the performance and
maintenance category. Click “System” to open the system properties window.
3. Windows 2000 and XP: select the hardware tab in the properties window and click the
device-manager button.
Windows 98 and Me: click the device-manager tab in the properties window.
6.Windows 2000 and XP: click on the action button to display the drop-down menu.
Select “uninstall.” A confirmation screen will appear. Clicking “Yes” will remove the
driver from the system.
Windows 98 and Me: click the remove button. A confirmation screen will appear.
Clicking “Yes” will remove the driver from the system.
7.Disconnect the USB cable and turn off the camera. Restart the computer.
98 APPENDIX
CARE AND STORAGE
Read this section in its entirety to get the best results from your camera. With proper
care, your camera will provide years of service.
Camera care
• Do not subject the camera to shock or impact.
• Turn off the camera when transporting.
• This camera is neither waterproof nor splashproof. Inserting or removing batteries or
the memory card, or operating the camera with wet hands may damage the camera.
• When at the beach or near water, take care not to expose the camera to water or sand.
Water, sand, dust, or salt can damage the camera.
• Do not leave the camera under direct sunlight. Do not point the lens directly at the sun;
the CCD may be damaged.
Cleaning
• If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth.
If the camera or lens comes in contact with sand, gently blow away loose particles.
Wiping may scratch the surface.
• To clean the lens surface, first blow away any dust or sand, then gently wipe the lens
with a cloth or tissue designed for optics. Use lens-cleaning fluid if necessary.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
Storage
• Store in a cool, dry, well-ventilated area away from dust and chemicals. For long
periods of disuse, store the camera in an airtight container with a silica-gel drying
agent.
• Remove the batteries and memory card from the camera when not in use for extended
periods.
• Do not store the camera in an area with naphthalene or mothballs.
• During long periods of storage, operate the camera occasionally. When taking the
camera out of storage, check that the camera is functioning properly before using.
99
Memory cards
SD Memory Cards, MultiMediaCards, and Memory Sticks are manufactured with preci-
sion electronic components. The following may cause data loss or damage:
• Improper use of the card.
• Bending, dropping, or subjecting the card to impact.
• Heat, moisture, and direct sunlight.
• Static electrical discharge or electromagnetic fields near the card.
• Removing the card or interrupting the power supply while the camera or a computer is
accessing the card (reading, writing, formatting, etc.).
• Touching the electrical contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically may be necessary.
Konica Minolta has no responsibility for any loss or damage to data. It is recommended
that a copy of the card data be made.
Batteries
• Battery performance decreases with temperature. In cold environments, we
recommend keeping spare batteries in a warm place, such as the inside of a coat.
Batteries can recover their power when they warm up.
• Do not store the battery when it is fully charged.
• When storing the battery for extended periods, recharge it for five minutes every six
months. The battery may not be able to be charged if completely exhausted. Store
batteries within -20°C to 35°C (-4°F to 95°F).
• A special built-in, long-life battery supplies power to the clock and memory when the
camera is turned off. If the camera resets each time it is turned off, the battery is
exhausted. It must be replaced at a Konica Minolta service facility.
• Keep battery and camera charger contacts clean. Dirty contacts can prevent charging.
If the contacts become dirty, wipe them with a cotton swab.
100 APPENDIX
Operating temperatures and conditions
• This camera has been designed for use in temperatures from 0°C to 50°C (32°F to
122°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car
parked in the sun, or to extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic
bag to prevent condensation from forming. Allow the camera to come to room
temperature before removing it from the bag.
Copyright
• TV program, films, video tapes, photographs, and other materials may be copyrighted.
Unauthorized recording or duplication of such material may be contrary to copyright
laws. Taking pictures or images of performances, exhibitions, etc., is prohibited without
approval and can infringe on copyright. Images protected by copyright can only be used
under the provisions within the copyright laws.
101
TECHNICAL SPECIFICATIONS
Number of effective pixels: 6.0 million
CCD: 1/1.76-type interline complementary-color CCD with
a total of 6.4 million pixels.
Camera sensitivity (ISO): Automatic and manual (ISO 50, 100, 200, 400)
Aspect ratio: 4:3
Lens construction: 7 elements in 6 groups.
Maximum aperture: f/2.8 - f/4.9
Focal length: 8 - 24 mm (35mm equivalent: 39 - 117 mm)
Focusing range: Wide angle: 0.5 m - ∞ (Macro: 6cm - ∞)
Telephoto: 0.8 - ∞ (Macro: 50cm - ∞)
Autofocusing system: Video AF
Shutter: CCD electronic shutter plus mechanical shutter
Shutter speed range: 1 - 1/2000s (autoexposure), 15 - 1/1000s (Manual)
Built-in flash recycling time: Approximately 6 seconds
Viewfinder: Optical real-image zoom viewfinder.
Monitor LCD: 3.8 cm TFT color
Monitor field of view: Approximately 100%
A/D conversion: 10 bits
Recording media: SD Memory Cards, MultiMediaCards,
Memory Stick, Memory Stick Pro
File formats: JPEG, motion JPEG (AVI), WAV.
DCF 1.0, DPOF ver. 1.1, and Exif 2.2 compliant.
Printing output control: PictBridge, Exif Print
Menu languages: Japanese, English, German, and French.
102 APPENDIX
Battery: Konica Minolta NP-600 lithium-ion battery.
Battery performance (recording): Approximately 160 frames: based on the CIPA stan-
dard with NP-600 lithium-ion battery, LCD monitor
on, full-size images (2816 X 2112), normal image
compression, no Quick View, no audio, flash used
with 50% of the frames.
Battery performance (playback): Approximate continuous playback time: 180 min.
with NP-600 lithium-ion battery.
External power source: AC adapter AC-8
Dimensions: 94.0 (W) X 56.0 (H) X 29.5 (D) mm
3.7 (W) X 2.2 (H) X 1.2 (D) in.
Weight: Approximately 195g / 6.9oz
(without battery or recording media)
Operating temperature: 0°C to 50°C (32°F to 122°F)
Operating humidity: 20 - 80% (noncondensing)
Specifications are based on the latest information available at the time of printing and are
subject to change without notice.
103
© 2004 Konica Minolta Photo Imaging, Inc. under the Berne Convention
and the Universal Copyright Convention.
9222-2744-11 IM-B404
Printed in Malaysia