Professional Documents
Culture Documents
A2047-A2127-TaperedRollerBearings-TS(TaperedSingle)Imperial
A2047-A2127-TaperedRollerBearings-TS(TaperedSingle)Imperial
Part Number A2047 - A2127, Tapered Roller Bearings - TS (Tapered Single) Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the
cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series A2000
Dimensions
5/29/2024 | Page 2 of 4
0.4719 in
d - Bore
11.986 mm
1.2595 in
D - Cup Outer Diameter
31.991 mm
0.4246 in
B - Cone Width
10.785 mm
0.3755 in
C - Cup Width
9.538 mm
0.4161 in
T - Bearing Width
10.569 mm
-0.12 in
a - Effective Center Location3
-3 mm
5/29/2024 | Page 3 of 4
2070 lbf
C0 - Static Radial Rating
9230 N
Factors
K - Factor7 1.44
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
0.3755
0.09
0.4246
1.2595
0.4719
1.02
0.61
0.65
1.14
-0.12
IMPERIAL UNITS
ISO Factor - e 0.41
ISO Factor - Y 1.48 A2047 - A2127
Bearing Weight 0.1 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 10 Imperial
Effective Center Location -0.12 inch
K Factor 1.44
Dynamic Radial Rating - C90 630 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 437 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 2070 lbf
Dynamic Radial Rating - C1 2430 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY