The battery will consume power during transportation,so the battery is unplugged and needs to
be connected before starting
After confirming that all wires are connected properly,start to power on, Must send a photo and confirm that the cable is correct before preparing to power on!!!!!
1,First,switch on the distribution box
2,open the PDU as shown below(power is already on the slip ring after turning on the switch ,be careful) 3,measure voltage is normal or not
Voltage error range is about 10 percent
4.if the voltage is normal,turn on the UPS and one-button
switch Attach the landing interface as shown below Login account:Engi; password:MFDSXFE