Professional Documents
Culture Documents
TDS Blown Film 70mic
TDS Blown Film 70mic
STORAGE : Stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area
should also be dry and well-ventilated area.. Hond Tat would not give warranty to bad
storage conditions which may lead to quality deterioration such as color change, bad
smell
and inadequate product performance. Use proper grounding procedures to prevent static
charges accumulating.
HANDLING: The material contains some static charges. Good controlling of dusts and flammable
gases is necessary for safe handling. Keeping the product clean, electrically ground all
equipment.
Revision : 00
Date : 01st September 2020
4. PROPERTY VALUE
SPECIFICATION
TEST ITEM UNIT TOLERANCE
70 (µ)
TEST METHOD & EQUIPMENT
SLIP TEST CT COF N/A ≤0.2 ASTM D1894-01 ; Moving Weight 205g
(FRICTION) NO CT COF N/A ≤0.25 ; Speed Test 150mm/min
WHITE % ±5 70
CONTRA CLEAR % ±5 15
OPACITY RATIO-1 PINK % ±5 30 N/A
PCS TRANSLUCENT % ±2 18
WHITE
APPEARANCE OK VISUAL
DISCLAIMER
The information contained herein may include typical properties of our products or their typical performances when
used in certain typical applications. Actual properties of our products, in particular when used in conjunction with any
third party material(s) or for any non-typical applications, may differ from typical properties. It is the customer's
responsibility to inspect and test our product(s) in order to satisfy itself as to the suitability of the product(s) for its and
its customer’s particular purposes. The customer is responsible for the appropriate, safe and legal use, processing and
handling of all product(s) purchased from us. Nothing herein is intended to be nor shall it constitute a warranty
whatsoever, in particular, warranty of merchantability or fitness for a particular purpose.
Revision : 00
Date : 01st September 2020