Professional Documents
Culture Documents
LEXAN™ Resin_143R_Europe_Technical_Data_Sheet
LEXAN™ Resin_143R_Europe_Technical_Data_Sheet
REGION EUROPE
DESCRIPTION
LEXAN™ 143R resin is a 11 MFR polycarbonate, MVR of 12. UV Stabilized. Mold release. UL94 HB rated. UL746C f1 rated.
MECHANICAL
Taber Abrasion, CS-17, 1 kg 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 63 MPa ISO 527
IMPACT
Izod Impact, unnotched 80*10*3 +23°C NB kJ/m² ISO 180/1U
THERMAL
Thermal Conductivity 0.2 W/m-°C ISO 8302
PHYSICAL
Mold Shrinkage on Tensile Bar, flow 0.5 – 0.7 % SABIC method
OPTICAL
Light Transmission, 2.54 mm 88 – 90 % ASTM D1003
Haze, 2.54 mm <0.8 % ASTM D1003
Ball Pressure Test, 125°C +/- 2°C PASSES - IEC 60695-10-2
Ball Pressure Test, approximate maximum 140 °C IEC 60695-10-2
PHYSICAL
Mold Shrinkage on Tensile Bar, flow 0.5 – 0.7 % SABIC method
PROPERTIES TYPICAL VALUES UNITS TEST METHODS
Density 1.2 g/cm³ ISO 1183
OPTICAL
Light Transmission, 2.54 mm 88 – 90 % ASTM D1003
Haze, 2.54 mm <0.8 % ASTM D1003
ELECTRICAL
Volume Resistivity >1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA >1.E+15 Ω IEC 60093
FLAME CHARACTERISTICS
INJECTION MOLDING
Drying Temperature 120 °C
Hopper Temperature 60 – 80 °C
Mold Temperature 80 – 110 °C
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.