Professional Documents
Culture Documents
ACS CONFIGURATION PROCEDURE
ACS CONFIGURATION PROCEDURE
ACS CONFIGURATION PROCEDURE
PROCEDURE
Chapter 1 | Face Recognition Configuration Procedure
Step 1 :
Figure-1
Step 2:
Figure-2
Then enter Username: admin and Password: Admin@123 then click on log in.
After that a window will open as shown below.
Step 3:
Figure-3
As you can see there are multiple option on the left side of windows. Click on Person
Option. After that a window will open as show below.
Step 4:
Figure-4
As you can see, there is an option called add in the window. Click on the add option.
After that a window will open as show below.
Step 5 :
Figure-5
As you see you can filling in all details then click on upload photo.
After that a window will open as show below.
Step 6:
Figure-6
As you can see after click on upload photo you have to select photo then click on save option.
After that a window will open as show below.
Step 7:
Figure-7
After saving photo. You have to select face comparison group then click on add option.
After that a window will open as show below.
Step 8:
Figure-8
As you can see there are multiple option on the left side of windows. Click on Intelligent Recognition option and
expand it. Then click on Face Comparison Group. After that a window will open as shown below.
Step 9:
Figure 9:
After Click on Face Comparison Group make sure the photo added to the person group appears here.
Visitor Management OTP Procedure
Step 1:
Figure-1
Open Visitor Tracker Shortcut Application then enter username: sec Password: sec then click on login.
Step 2:
Figure-2
After Login Visitor Tracker Shortcut. Click on New GatePass.
After that a window will open as show below.
Step3 :
Figure-3
As you see you can create OTP . After filling in all details according to this window, then click on save
option.
Step 4:
Figure-4
Once OTP is sent, you can check by going to the sign-out option.
ACS Log In, Company Profile, Access Card, Remotely
Door/Open Configuration Procedure
Chapter 1 | Log In Procedure
Step 1 :
Figure-1
Step 2:
Figure-2
Figure-3
Step 4:
Figure-4
As you can see, there is an option called add in the window. Click on the add option.
After that a window will open as shown below.
Step 5:
Figure-5
As you see you can add company here. After filling in all details, click on save option.
Step6:
Figure-6
As you can see there are multiple option on the left side of windows. Click on Employee
option and expand it. Then Click on Employee Master. After that a window will open as shown below.
Step7 :
Figure-7
As you can see, there is an option called Create New in the window. Click on this option.
After that a window will open as shown below.
Step 8:
Figure-8
As you can see there are multiple option in the Personal details tab After filling in all details, click on
Company details. After that a window will open as shown below.
Step 9:
Figure-9
As you can see there are multiple option in the Company details tab After filling in all details, click on
Access details. After that a window will open as shown below.
Step 10 :
Figure-10
As you can see there are two option in the Access Details.
Card Details
Access Right
In Card Details you can decide which type of access you want to give.
(For e.g : Card Only / Pin Only / Card Or Pin Only / Card and Pin.)
You can select the card number you want and add the card.
Step 11:
Figure-11
In Access Rights you can select which access group you want to give access.
Step 12:
Figure-12
As you can see there are multiple option on the left side of windows. Click on Door Actions
option and expand it. Then click on Door Open/Close. After that a window will open as shown below.
Step 13:
Figure-13
As you see you can open and close the door by selecting the location you want.