Professional Documents
Culture Documents
xc410
xc410
FEATURES
! 6 Digit, 7 Segment LED Totaliser
! Compact Size
! Inbuilt Sensor Supply
TECHNICAL SPECIFICATIONS
C US
E253771
FUNCTIONAL SPECIFICATIONS
TERMINAL CONNECTIONS Range 999999 counts
Counting Direction Up
L (-) L (+)
Memory Retention Yes
OUTPUT SPECIFICATIONS
Cable Size (AWG): 16 ; Stud Hole for Lug (inch): 0.118 ; Tightening Torque (Lb-inch): 4.5 Sensor Supply Inbuilt, 12V DC, 30mA
Cable Size (mm ): 1.5 ; Stud Hole for Lug (mm): 3 ; Tightening Torque (N-m): 0.5
2
GENERAL SPECIFICATIONS
28mm
NPN
PNP
2. The power connection cable must have a
cross-section of atleast 1sq.mm and ! Temperature:
NPN / Potential
insulation capacity of atleast 1.5kV. Operating: 0 - 50oC, Storage: -20 - 75oC.
NPN
PNP
free contact
3. The output connections must not be loaded ! Humidity: 95 % RH. Jumpers are located towards the right side of the unit. Given
beyond the specified values/range.
! Weight: approx. 90gms. above is the Front view of jumpers with housing removed and
4. Avoid inflow of dust and contact of display towards the left.
conductive material with the internal Dimensions (in mm):
NPN / PNP Sensor: Potential free contact:
circuitry of the unit. Panel cutout : 29mm (H) x 71mm (W) +12V CNT COM
(Specifications subject to change as development is a continuous process).
+12V CNT COM
4
1 2 3
Selec Controls USA., Inc. 33 Front view 1 2 3
Tel: 908-627-2149, Fax: 732-960-8611 23.5
203 Main Street, #205, Flemington, NJ 08822, USA
GND
Website: www.selecusa.com E- mail: sales@selecusa.com 75 74.5 O/P Note : The above connection
3.5
Operating/0804/XC410/Ver 05 OP033(U1.1)-V05 V+ is valid when selection is NPN