Remaining Life Assesment of 2.25 Cr 1Mo
Steel by Accelerated Creep Testing
(SE | semnac sai ast oasnaat, Abdullah Abbas, Waseem Arshad, Dr Syed Wala, Dr Anjum Taugeer
Department of Materials Science Engineering, Institute of Space Technology, Islamabad
This project aims to develop a numerical model for Sample Preperation creep testing
predicting creep behavior and remaining life of 2.25%
Cr 1% Mo steel in high-temperature boiler tubes,
crucial for industrial safety. It integrates Experimental
testing, Microstructural Characterization, Hardness
and consecutive creep equations.
Creep Damaged Conduct Stress Remaining Life
‘Components Rupture Test Assesment
Chracterization ¢__ Hardness testing
en
ose a nat ee ae 7
jaar a5 gen tena ara am Larson Millar Curves
Eis tom eat ae cao P
(93 925s 20018
Larson
Microstructural Analysis - Millar
Creep Void we Plot VS
damage at wel peices
grain boundary
an at triple { “|
point \ eee
oe (>) weeaucimnenvoes Larson
q upture Curves: ) 7
2 2 2 Millar
cngheee S/o ee
(2) am Say “hemes =a) Plot VS
- zi) =a Harness
1+ — =P pm 7 nN
NE NO £=1.2E+230"exp(-6212/RT)
(Creep Equations) y=1:26-14 orexp(3008/RT)
‘+ Remaining life of component basis of Larson Millar Parameter compared + Decrease in hardness value is dependent on temperature in
with API Standard is 3.99¢14 hours service
‘+ Creep Voids increases in microstructures with increase hours of rupture + Average creep ductility is around 8 % in 50 mm sample
{a} ep peas te einige sense of 225 C-iMo ste tutes rm ther pone plat. Mtr cence edging we Are 484 pe. 788
References tlretr toi o:tabey cempcatatonin cSt stats n Avanos Mati Tetralogy or PonerPats LA pp. 7a Pah AS etd
{SITomara Mt bo Fhe, Satsegen,H-8Tanigows, M203) creo constant ef hea resetent ste Mtalurgcl and mates Vorcactins A 44), 2645 2661