Professional Documents
Culture Documents
ITI-1st-Year-Engineering-Drawing-MCQ-English-Hindi-SET-2_compressed (1)
ITI-1st-Year-Engineering-Drawing-MCQ-English-Hindi-SET-2_compressed (1)
ं ड्राइंग
ITI 1st Year, Common For All Trade
Unit 01: Introduction to Engineering Drawing and Drawing Instruments (English/ ह द
ं ी) SET- 02
27. Using 30˚ – 60˚ – 90˚ and 45˚ – 45˚ – 90˚ set a) 25mm
squares, which of the following angle is not b) 30mm
possible to draw? c) 35mm
30˚ - 60˚ - 90˚ और 45˚ - 45˚ - 90˚ सेट वगों का d) 40mm
उपयोग करके, तनम्नललखखत में से कौन सा कोण खींचना Answer- a
संभव नहीं है ?
a) 45˚ 31. For drawing circles with a large radius,
b) 30˚ which of the following tool is used?
c) 10˚ बडे त्रिज्या वाले वत्ृ त खींचने के ललए, तनम्नललखखत में से
d) 90˚ र्कस उपकरण का उपयोग र्कया जाता है ?
Answer - c a) Bow compass िनष
ु कम्पास
b) Lengthening bar compass बार कंपास को लंबा
28. Which is the instrument used to draw करना
parallel lines fast? c) Divider ववभ्त
समानांतर रे खाएं तेजी से खींचने के ललए र्कस उपकरण d) Protractors प्रोट्रै ्टर
का उपयोग र्कया जाता है ? Answer-b
a) Set square सेट स्क्वेयर
b) Ruler scale रुलर स्ककेल 32. Which of the following drawing tool is used
c) Protractor चांदा to transfer dimensions when there is a repetition
d) Roll-n-draw ruler रोल-एन-ड्रा रूलर of the dimensions?
Answer- d आयामों की पन
ु रावत्ृ त्त होने पर आयामों को स्कथानांतररत
करने के ललए तनम्नललखखत में से र्कस ड्राइंग टूल का
29. Which of the following cannot be drawn उपयोग र्कया जाता है ?
accurately using roll-n-draw RULER? a) Compass कंपास
रोल-एन-ड्रा रूलर का उपयोग करके तनम्नललखखत में से b) Protractor चांदा
कौन-सा सही-सही नहीं खींचा जा सकता है ? c) Divider ववभ्त
a) Lines रे खाएं d) Mini – Drafter लमनी - ड्राफ्टर
b) Horizontal lines क्षैततज रे खाएं Answer-c
c) Parallel lines समानांतर रे खाएं
d) Continuous curves सतत वक्र
Answer- d
33. Which is not the use of divider? 36. Which of the following is hardest pencil
डडवाइडर का उपयोग र्कसमें नहीं होता है ? grade.
a) To divide curved or straight lines into the तनम्नललखखत में से कौन सबसे कहठन पें लसल ग्रेड है ।
desired number of equal parts घम
ु ावदार या सीिी a) 1H
रे खाओं को वांतछत संख्या में समान भागों में ववभात्जत b) 9H
करने के ललए c) 4H
b) To draw circles वत्ृ त बनाने के ललए d) 2H
c) To transfer dimensions from one part of the Answer- b
drawing to another part ड्राइंग के एक हहस्कसे से दस
ू रे
हहस्कसे में आयामों को स्कथानांतररत करने के ललए 37. Which of the following is softest pencil
d) To set-off given distances from the scale to grade.
the drawing स्ककेल से ड्राइंग तक दी गई दरू रयों को सेट- तनम्नललखखत में से कौन सबसे नरम पें लसल ग्रेड है ।
ऑफ करने के ललए a) 1B
Answer-b b) 7B
c) 9B
34. _________ is used to draw smooth curves d) 2B
which are not circular. Answer- b
_________ का उपयोग धचकने वक्र बनाने के ललए र्कया
जाता है जो वत्ृ ताकार नहीं होते हैं। 38. Which of the following grades of leads is
a) Compass कंपास the hardest?
b) Protractor चांदा लीड का तनम्न में से कौन सा ग्रेड सबसे कहठन है ?
c) French curves फ्रेंच कर्वसग a) 6B
d) Pro circle प्रो सकगल b) 5H
Answer-c c) 4B
d) 6H
35. Pencils are graded according to the Answer- d
____________ of the lead.
पें लसल को _________ के अनस
ु ार वगीकृत र्कया जाता 39. For marking angles, which of the following
है । drawing tool is used?
a) Black or white काला या सफेद कोणों को धचत्ननत करने के ललए, तनम्नललखखत में से
b) Smaller or longer छोटा या लंबा र्कस ड्राइंग टूल का उपयोग र्कया जाता है ?
c) Hardness or softness कठोरता या कोमलता a) Protractor प्रोट्रै ्टर
d) Thick or thin मोटा या पतला b) Divider डडवाइडर
Answer- c c) Compass कम्पास
d) French curve फ्रेंच वक्र
Answer- a