Professional Documents
Culture Documents
CERTIFICATE OF CALIBRATION FOR A Pressure Guage- BL O1PASS
CERTIFICATE OF CALIBRATION FOR A Pressure Guage- BL O1PASS
CERTIFICATE OF CALIBRATION FOR A Pressure Guage- BL O1PASS
PVT LTD
Office Suite East Wing,
1 Conald Road, Graniteside,
ADJUSTING SOLUTIONS
Harare, Zimbabwe
Tel: +263761917,
Cell: +263-773058667
CERTIFICATE OF CALIBRATION
CALIBRATION OF A PRESSURE GUAGE
MANUFACTURER
SERIAL NUMBER
CERTIFICATE NUMBER BL 01
MODEL NUMBER Dial Guage
CALIBRATED FOR HUNYANI BIRMINGHAM ROAD
PLACE OF CALIBRATION HUNYANI BIRMINGHAM ROAD
LOCATION BOILER
DATE OF CALIBRATION 27/10/2023
CALIBRATION DUE DATE 27/01/2024
TEMPERATURE 22±3 ºC
HUMIDITY 50±20%RH
PASSED
Resolution 20kPa
CALIBRATION PROCEDURE
The pressure guage was calibrated by comparison with a STANDARD PRESSURE CALIBRATOR
with certificate number P-665-07-2023.
TRACEABILITY
0 0 0
5 5 0
10 10 0
15 15 0
20 20 0
25 25 0
Uncertainty ≈ ± 20kPa
The uncertainty of measurement are based on a standard uncertainty multiplied by a coverage factor of k=2, which unless
specifically stated otherwise, provides a level of confidence of approximately 95%. The correction should be added to the
indicated reading of the unit under test to obtain the actual reading.
The above results were obtained at that particular date and condition and may not be reproducible and this report may not
be reproduced in part except in full with our written approval.