Professional Documents
Culture Documents
BCV-301-Dr.M M Avati
BCV-301-Dr.M M Avati
Internal Assessment -1
Subject: Strength of Materials (BCV301) Date: 04/01/2024
Semester: IlI Time: 9.30 am - 10.30 am
Note: Answer one FULL question from each part.
Assume missing data suitably. Total Marks: 25
PART-A CO
Q1 05 M 1(01)
a. State Hook's law and draw stress strain diagram for mild steel with
salient's points.
b A mild steel bar of diameter 20 mm is subjected to a tensile load of 7.5 M 1(04)
100kN. Determine the stress developed in the bar, the extension
and strain if its original length is 200mm. Take E for mild steel as
Es= 200x10° Nimm².
Q2 1(02)
a. Define Young's modulus and Bulk modulus and derive the relation M
05
between them.
b A cube of size 100mmx10Ommx10Omm is subjected to forces of 7.5 M 1(04)
100Kn (Tensile), 200Kn(Compressive) and 50 kn (Compressive) in
X, Y and Z directions respectively. Determine the change in Volume
if E= 200x10° N/mm and Poisson's 0.30
PART-B
Q3 Define Shear and Bending moment 02 M 2(1)
A simply supported beam is loaded as shown in Fig. 1. Find SF and 10.5 M 2(4)
BM at different points and draw SFD and BMD
Q4 03 M 2(1)
a. Enumerate different types of loads on the beam.
b A simply supported beam is loaded as shown in Fig. 2. Find SF and 9.5 M 2(4)
BM at different points and draw SFD and BMD
LO
kN (m
a
m
3
2
Fig) Dok
3m
Figce)
Course File Format: Acad/01 Scrutinized by:
STSKK's
TONTADARYA COLLEGE OF ENGINEERING, GADAG
Department of Civil Engineering
3 3
1 3
Scrutinized by:
Course File Format: Acad/01