Professional Documents
Culture Documents
CC_S_4_Reparaturverfahren_Kunststoffe_EN
CC_S_4_Reparaturverfahren_Kunststoffe_EN
CC_S_4_Reparaturverfahren_Kunststoffe_EN
S4
03/2011
Glasurit® Glasurit®
Heating
541-30 541-30 of PU foam and polyamide
Universal cleaner Universal cleaner (PA) to remove mould
1x Sand 1x Wipe dry release agents and water 1h 1x
for plastics damaged
for plastics at 60°C moistened
Cleaning surface with
P80-P600
cloth
Sand
surrounding
area with
sanding
pad
Glasurit®
934-0
Primer 1K-Plastics
Adhesion Primer
HVLP 1 15 min
at 20°C
1.3 mm 10-15 µm
2.0-3.0 bar
Glasurit® Glasurit®
285-55 VOC / 522-111
Filler 285-65 VOC
HS Primer Filler
Softface Additive
4:1
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the
respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many BASF Coatings GmbH
factors that may affect processing and application of our products, these statements do not relieve processors Automotive Refinish Coatings Solutions
from carrying out their own investigations and tests; neither do these data imply any guarantee of certain Europe
properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, Glasuritstraße 1
data, proportions, weights etc. given herein are for general information purpose only; they may change without 48165 Münster
prior information and do not constitute the agreed contractual quality of the products (product specification). The Germany
latest version supersedes all previous versions. You can obtain the latest version from our website at
www.glasurit.com or directly from your sales partner. It is the responsibility of the recipient of our products to
ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this
product contains particles < 0.1 µm.
Technical Information
S4
03/2011
Glasurit® Glasurit®
22 VOC HS 522-111
2KTopcoat Softface Additive
Topcoat 4:1
or
Glasurit® Glasurit®
90 Line 93-E3
Basecoat Adjusting Base
Topcoat 2:1
mixing stick
HVLP
1.3 mm
2+½
10-15 µm
Flash off until
mat between
spraycoats and
2.0-3.0 bar before
clearcoat
application
Glasurit® Glasurit®
22-VOC HS 2K 522-111
Topcoat Softface Additive
Clear or
4:1
923-335 VOC
HS Multi Clear
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the
respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many BASF Coatings GmbH
factors that may affect processing and application of our products, these statements do not relieve processors Automotive Refinish Coatings Solutions
from carrying out their own investigations and tests; neither do these data imply any guarantee of certain Europe
properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, Glasuritstraße 1
data, proportions, weights etc. given herein are for general information purpose only; they may change without 48165 Münster
prior information and do not constitute the agreed contractual quality of the products (product specification). The Germany
latest version supersedes all previous versions. You can obtain the latest version from our website at
www.glasurit.com or directly from your sales partner. It is the responsibility of the recipient of our products to
ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this
product contains particles < 0.1 µm.
Technical Information
S4
03/2011
Glasurit® Glasurit®
22 VOC HS 2K 522-111
Topcoat Softface Additive
Topcoat 2:1
or
Glasurit® Glasurit®
90 Line 93-E3
Basecoat Adjusting Base
Topcoat 2:1
mixing stick
HVLP
1.3 mm
2+½
10-15 µm
Flash off until
mat between
spraycoats and
2.0-3.0 bar before
clearcoat
application
Glasurit® Glasurit®
22-VOC HS 2K 522-111
Topcoat Softface Additive
Clear or
2:1
923-335 VOC
HS Multi Clear
Please refer to the EU Material Safety Data Sheet for product labelling as required by Directive 1999/45/EC and the
respective national rules. The products are suitable for professional use only.
The data contained in this publication are based on our current knowledge and experience. In view of the many BASF Coatings GmbH
factors that may affect processing and application of our products, these statements do not relieve processors Automotive Refinish Coatings Solutions
from carrying out their own investigations and tests; neither do these data imply any guarantee of certain Europe
properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, Glasuritstraße 1
data, proportions, weights etc. given herein are for general information purpose only; they may change without 48165 Münster
prior information and do not constitute the agreed contractual quality of the products (product specification). The Germany
latest version supersedes all previous versions. You can obtain the latest version from our website at
www.glasurit.com or directly from your sales partner. It is the responsibility of the recipient of our products to
ensure that any proprietary rights and existing laws and legislation are observed. It cannot be ruled out that this
product contains particles < 0.1 µm.