Professional Documents
Culture Documents
POWCAL_29oct07
POWCAL_29oct07
POWCAL_29oct07
planimeter (mm ) 2
diagram (mm) pressure pressure Power Power Power (1% less than effective Engine Power)
CALCULATION OF "Mean Indicated Pressure" FOR EACH CYLINDER: Calculation of Percent Engine Load:
Pi value taken from PMI system Total Effective Power
pi = = X 100
Rated BHP on name plate
CALCULATION OF "Indicated Engine Power" FOR EACH CYLINDER: (measured in metric IHP)
CALCULATION OF "Effective Engine Power" FOR EACH CYLINDER: (measured in metric BHP)
F.O. DENSITY @ 15 oC: 0.9905 Kg/L CYLINDER OIL DENSITY @ 15 oC: 0.9430 Kg/L
F.O. TEMP @ F'METER ( T1 ): 75.00 oC CYLINDER OIL CONS PER DAY: 240 Liters/24 Hours
F.O. CONS. @ FLOWMETER: 35544.00 Liters/24 Hours CYLINDER OIL CONS PER HR: 10.00 Liters/Hour
F.O. CONS. @ FLOWMETER: 1481.00 Liters/Hour
HFO (MT/D) 33382.64 = Calculated Fuel Oil consumption from Flowmeter in Metric tons per Day
HFO (gr/BHP*h) #DIV/0! = Calculated Fuel Oil consumption in Grams per BHP-H
CLO (Lt/D) 240 = Measured Cylinder Oil consumption
CLO (gr/BHP*h) #DIV/0! = Calculated Cylinder Oil consumption in Grams per BHP-H
SUBMITTED BY:
ROGELIO G. FERRER
CHIEF ENGINEER
M/T O. ATALMAR