Professional Documents
Culture Documents
MSDS Carbon Remover
MSDS Carbon Remover
1.2. Relevant identified uses of the substance or mixture and uses advised against
Chemical Product
PC35 Washing and cleaning products (including solventbased products)
Category
Sectors of Use SU3 Industrial uses: Uses of substances as such or in preparations* at industrial sites
Page 1 continued...
Part Number: 571604 (25L steel drums) Page 2 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Website http://www.wilhelmsen.com
Email wss.rotterdam@wilhelmsen.com
Emergency telephone
+ 31 30 274 88 88 + 31 88 7558561 +31-10-4877700
numbers
Other emergency
+31-10-4877700 + 31 10 4877700 +1 800 424 9300
telephone numbers
Other emergency
+ 31-10-4877700
telephone numbers
Legend: 1. Classified by Chemwatch; 2. Classification drawn from Regulation (EU) No 1272/2008 - Annex VI
Hazard pictogram(s)
Hazard statement(s)
H311 Toxic in contact with skin.
H372 Causes damage to organs through prolonged or repeated exposure. (Respiratory system) (Inhalation)
Supplementary statement(s)
Not Applicable
Continued...
Part Number: 571604 (25L steel drums) Page 3 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
P264 Wash all exposed external body areas thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
3.1.Substances
See 'Composition on ingredients' in Section 3.2
3.2.Mixtures
1.CAS No
Nanoform
2.EC No Classification according to regulation (EC) No SCL /
%[weight] Name Particle
3.Index No 1272/2008 [CLP] and amendments M-Factor
Characteristics
4.REACH No
1.29797-40-8*
Hazardous to the Aquatic Environment Long-Term
2.249-854-8 Not
30-60 dichlorotoluene Hazard Category 1, Skin Corrosion/Irritation Not Available
3.Not Available Available
Category 2; H410, H315 [1]
4.Not Available
Continued...
Part Number: 571604 (25L steel drums) Page 4 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
1.CAS No
Nanoform
2.EC No Classification according to regulation (EC) No SCL /
%[weight] Name Particle
3.Index No 1272/2008 [CLP] and amendments M-Factor
Characteristics
4.REACH No
2, Serious Eye Damage/Eye Irritation Category 1,
Sensitisation (Skin) Category 1, Acute Toxicity
4.Not Available
(Oral) Category 3; H311, H314, H411, H318, H317,
H301 [1]
Legend: 1. Classified by Chemwatch; 2. Classification drawn from Regulation (EU) No 1272/2008 - Annex VI; 3. Classification drawn from
C&L; * EU IOELVs available; [e] Substance identified as having endocrine disrupting properties
4.2 Most important symptoms and effects, both acute and delayed
See Section 11
4.3. Indication of any immediate medical attention and special treatment needed
Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically or pharmacologically. Mechanical means
should be used if it is considered necessary to evacuate the stomach contents; these include gastric lavage after endotracheal intubation. If spontaneous vomiting
has occurred after ingestion, the patient should be monitored for difficult breathing, as adverse effects of aspiration into the lungs may be delayed up to 48 hours.
As in all cases of suspected poisoning, follow the ABCDEs of emergency medicine (airway, breathing, circulation, disability, exposure), then the ABCDEs of
toxicology (antidotes, basics, change absorption, change distribution, change elimination).
For poisons (where specific treatment regime is absent):
--------------------------------------------------------------
BASIC TREATMENT
--------------------------------------------------------------
Establish a patent airway with suction where necessary.
Watch for signs of respiratory insufficiency and assist ventilation as necessary.
Administer oxygen by non-rebreather mask at 10 to 15 L/min.
Monitor and treat, where necessary, for pulmonary oedema.
Monitor and treat, where necessary, for shock.
Anticipate seizures.
DO NOT use emetics. Where ingestion is suspected rinse mouth and give up to 200 ml water (5 ml/kg recommended) for dilution where patient is able to
swallow, has a strong gag reflex and does not drool.
--------------------------------------------------------------
ADVANCED TREATMENT
--------------------------------------------------------------
Consider orotracheal or nasotracheal intubation for airway control in unconscious patient or where respiratory arrest has occurred.
Positive-pressure ventilation using a bag-valve mask might be of use.
Continued...
Part Number: 571604 (25L steel drums) Page 5 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Continued...
Part Number: 571604 (25L steel drums) Page 6 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
+ x + x + + +
Note: Depending on other risk factors, compatibility assessment based on the table above may not be relevant to storage situations, particularly where large volumes
of dangerous goods are stored and handled. Reference should be made to the Safety Data Sheets for each substance or article and risks assessed accordingly.
Dermal 4.2 mg/kg bw/day (Systemic, Chronic) 7.8 µg/L (Water (Fresh))
Inhalation 14.8 mg/m³ (Systemic, Chronic) 0.78 µg/L (Water - Intermittent release)
Inhalation 29.6 mg/m³ (Systemic, Acute) 12.6 µg/L (Water (Marine))
dichlorotoluene
Dermal 1.5 mg/kg bw/day (Systemic, Chronic) * 1.04 mg/kg sediment dw (Sediment (Fresh Water))
Inhalation 2.6 mg/m³ (Systemic, Chronic) * 0.104 mg/kg sediment dw (Sediment (Marine))
Oral 1.5 mg/kg bw/day (Systemic, Chronic) * 66.2 mg/kg soil dw (Soil)
Continued...
Part Number: 571604 (25L steel drums) Page 7 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
DNELs PNECs
Ingredient
Exposure Pattern Worker Compartment
1.37 mg/L (STP)
Inhalation 5.2 mg/m³ (Systemic, Acute) *
44.44 mg/kg food (Oral)
100 µg/L (Water (Fresh))
10 µg/L (Water - Intermittent release)
Inhalation 4.9 mg/m³ (Systemic, Chronic)
24 µg/L (Water (Marine))
Inhalation 0.87 mg/m³ (Systemic, Chronic) *
tar acids, 3,5-xylenol fraction 1.84 mg/kg sediment dw (Sediment (Fresh Water))
Oral 0.25 mg/kg bw/day (Systemic, Chronic) *
0.184 mg/kg sediment dw (Sediment (Marine))
Oral 17.5 mg/kg bw/day (Systemic, Acute) *
0.096 mg/kg soil dw (Soil)
1.14 mg/L (STP)
INGREDIENT DATA
Not Available Not Available Not Available Not Available Not Available Not Available Not Available
Not Applicable
Emergency Limits
Hydrocarbones, C10,
Not Available Not Available
aromatics, <1% naphtalene
tar acids, 3,5-xylenol fraction Not Available Not Available
Notes: Occupational exposure banding is a process of assigning chemicals into specific categories or bands based on a chemical's
potency and the adverse health outcomes associated with exposure. The output of this process is an occupational exposure
band (OEB), which corresponds to a range of exposure concentrations that are expected to protect worker health.
MATERIAL DATA
Sensory irritants are chemicals that produce temporary and undesirable side-effects on the eyes, nose or throat. Historically occupational exposure standards for
these irritants have been based on observation of workers' responses to various airborne concentrations. Present day expectations require that nearly every
individual should be protected against even minor sensory irritation and exposure standards are established using uncertainty factors or safety factors of 5 to 10 or
more. On occasion animal no-observable-effect-levels (NOEL) are used to determine these limits where human results are unavailable. An additional approach,
typically used by the TLV committee (USA) in determining respiratory standards for this group of chemicals, has been to assign ceiling values (TLV C) to rapidly
acting irritants and to assign short-term exposure limits (TLV STELs) when the weight of evidence from irritation, bioaccumulation and other endpoints combine to
warrant such a limit. In contrast the MAK Commission (Germany) uses a five-category system based on intensive odour, local irritation, and elimination half-life.
However this system is being replaced to be consistent with the European Union (EU) Scientific Committee for Occupational Exposure Limits (SCOEL); this is
more closely allied to that of the USA.
NOTE J: The classification as a carcinogen need not apply if it can be shown that the substance contains less than 0.1%w/w benzene (EINECS No 200-753-7). -
European Union (EU) List of harmonised classification and labelling hazardous substances, Table 3.1, Annex VI, Regulation (EC) No 1272/2008 (CLP) - up to the
latest ATP
NOTE M: The classification as a carcinogen need not apply if it can be shown that the substance contains less than 0.005% w/w benzo[a]pyrene (EINECS No
200-028-5). This note applies only to certain complex oil-derived substances in Annex IV.
European Union (EU) List of harmonised classification and labelling hazardous substances, Table 3.1, Annex VI, Regulation (EC) No 1272/2008 (CLP) - up to the
latest ATP
8.2.1. Appropriate Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed
engineering controls engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to
Continued...
Part Number: 571604 (25L steel drums) Page 8 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from
manufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the glove material
can not be calculated in advance and has therefore to be checked prior to the application.
The exact break through time for substances has to be obtained from the manufacturer of the protective gloves and has to be
Hands/feet protection observed when making a final choice.
Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands
should be washed and dried thoroughly. Application of a non-perfumed moisturiser is recommended.
Wear chemical protective gloves, e.g. PVC.
Wear safety footwear or safety gumboots, e.g. Rubber
Overalls.
Eyewash unit.
Other protection
Barrier cream.
Skin cleansing cream.
Respiratory protection
Type A Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent)
Selection of the Class and Type of respirator will depend upon the level of breathing zone contaminant and the chemical nature of the contaminant. Protection
Factors (defined as the ratio of contaminant outside and inside the mask) may also be important.
Required minimum protection Maximum gas/vapour concentration present in air p.p.m. (by Half-face Full-Face
factor volume) Respirator Respirator
up to 50 5000 Airline * -
Cartridge respirators should never be used for emergency ingress or in areas of unknown vapour concentrations or oxygen content.
The wearer must be warned to leave the contaminated area immediately on detecting any odours through the respirator. The odour may indicate that the mask
is not functioning properly, that the vapour concentration is too high, or that the mask is not properly fitted. Because of these limitations, only restricted use of
cartridge respirators is considered appropriate.
Cartridge performance is affected by humidity. Cartridges should be changed after 2 hr of continuous use unless it is determined that the humidity is less than
75%, in which case, cartridges can be used for 4 hr. Used cartridges should be discarded daily, regardless of the length of time used
Continued...
Part Number: 571604 (25L steel drums) Page 9 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Partition coefficient
Odour Not Available Not Available
n-octanol / water
Auto-ignition temperature
Odour threshold Not Available >200
(°C)
Decomposition
pH (as supplied) Infinity Not Available
temperature
Melting point / freezing
Not Available Viscosity (cSt) Not Applicable
point (°C)
Initial boiling point and
150-230 Molecular weight (g/mol) Not Applicable
boiling range (°C)
Flash point (°C) Not Applicable Taste Not Available
10.5. Incompatible
See section 7.2
materials
10.6. Hazardous
See section 5.3
decomposition products
Inhalation of aerosols (mists, fumes), generated by the material during the course of normal handling, may be damaging to the
Continued...
Part Number: 571604 (25L steel drums) Page 10 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
The liquid may be miscible with fats or oils and may degrease the skin, producing a skin reaction described as non-allergic
contact dermatitis. The material is unlikely to produce an irritant dermatitis as described in EC Directives .
Skin Contact
Open cuts, abraded or irritated skin should not be exposed to this material
Entry into the blood-stream through, for example, cuts, abrasions, puncture wounds or lesions, may produce systemic injury with
harmful effects. Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.
Eye Although the liquid is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may produce
transient discomfort characterised by tearing or conjunctival redness (as with windburn).
Long-term exposure to respiratory irritants may result in disease of the airways involving difficult breathing and related systemic
problems.
Chronic Limited evidence suggests that repeated or long-term occupational exposure may produce cumulative health effects involving
organs or biochemical systems.
Prolonged or repeated skin contact may cause drying with cracking, irritation and possible dermatitis following.
TOXICITY IRRITATION
CARBON REMOVER
Oral (Human)LC50: 150 mg/kg[2] Not Available
TOXICITY IRRITATION
Skin : Moderate
TOXICITY IRRITATION
Hydrocarbons, C10-C13, Dermal (Other) LD50: >3400 mg/kg[2] Not Available
n-alkanes, isoalkanes,
cyclics, aromatics (2-25%)- Inhalation(Rat) LC50; 13,1 mg/kg[2]
Legend: 1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS.
Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances
For dichlorotoluenes:
2,6-Dichlorotoluene is moderately toxic in a repeated dose study (i.e. liver, kidney, thymus) and reproductive/ developmental
toxicity study (maternal toxicity).
Repeat dose toxicity: In a combined repeat dose and reproductive/developmental toxicity screening test, using
2,6-dichlorotoluene both male and female rats showed histopathological changes in liver, kidney and thymus, and maternal
toxicity was observed. The no observed effect levels (NOEL) were obtained as 30 mg/kg/day for repeated dose toxicity and 100
mg/kg/day for reproductive toxicity.
dichlorotoluene In a combined repeat dose and reproductive/developmental toxicity screening test, using 2,4-dichlorotoluene, dose dependent
salivation was found in all treated groups. Toxicological significant changes in haematological and blood chemical examinations
were found at the highest dose (e.g. decrease of platelet count). Increased liver and kidney weights were also found at the same
level with pathological remarks (e.g. centrilobular swelling of hepatocytes). For reproductive/developmental end-points, a
decrease of fertility was found in conjunction with normal copulation but with low pregnancy at the highest dose. However, no
histopathological change related to infertility was seen in the paternal organs. Decreases of pup body weights were noted in the
highest dose group during the lactation period. No sensitising effects in guinea pig (OECD 406) GPMT according to Magnusson-
Kligman
tar acids, 3,5-xylenol The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to
fraction irritants may produce conjunctivitis.
Tumorigenic by RTECS criteria
Continued...
Part Number: 571604 (25L steel drums) Page 11 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
non-allergenic condition known as reactive airways dysfunction syndrome (RADS) which can occur following exposure to high
levels of highly irritating compound. Key criteria for the diagnosis of RADS include the absence of preceding respiratory disease,
in a non-atopic individual, with abrupt onset of persistent asthma-like symptoms within minutes to hours of a documented
exposure to the irritant. A reversible airflow pattern, on spirometry, with the presence of moderate to severe bronchial
hyperreactivity on methacholine challenge testing and the lack of minimal lymphocytic inflammation, without eosinophilia, have
acids, 3,5-xylenol fraction
also been included in the criteria for diagnosis of RADS. RADS (or asthma) following an irritating inhalation is an infrequent
disorder with rates related to the concentration of and duration of exposure to the irritating substance. Industrial bronchitis, on the
other hand, is a disorder that occurs as result of exposure due to high concentrations of irritating substance (often particulate in
nature) and is completely reversible after exposure ceases. The disorder is characterised by dyspnea, cough and mucus
production.
Respiratory or Skin
STOT - Repeated Exposure
sensitisation
Legend: – Data either not available or does not fill the criteria for classification
– Data available to make classification
12.1. Toxicity
Legend: Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic Toxicity
4. US EPA, Ecotox database - Aquatic Toxicity Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) -
Bioconcentration Data 7. METI (Japan) - Bioconcentration Data 8. Vendor Data
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Do NOT allow product to come in contact with surface waters or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning
equipment or disposing of equipment wash-waters.
Wastes resulting from use of the product must be disposed of on site or at approved waste sites.
Continued...
Part Number: 571604 (25L steel drums) Page 12 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Labels Required
Continued...
Part Number: 571604 (25L steel drums) Page 13 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Marine Pollutant
14.5. Environmental
Environmentally hazardous
hazard
14.5. Environmental
Environmentally hazardous
hazard
Continued...
Part Number: 571604 (25L steel drums) Page 14 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
14.5. Environmental
Marine Pollutant
hazard
14.5. Environmental
Environmentally hazardous
hazard
Classification code T1
Special provisions 274; 614; 802
14.6. Special precautions
Limited quantity 5L
for user
Equipment required PP, EP, TOX, A
Fire cones number 0
14.7. Transport in bulk according to Annex II of MARPOL and the IBC code
Not Applicable
14.8. Transport in bulk in accordance with MARPOL Annex V and the IMSBC Code
Product name Group
dichlorotoluene Not Available
Hydrocarbons, C10-C13,
n-alkanes, isoalkanes, Not Available
cyclics, aromatics (2-25%)-
Hydrocarbones, C10,
Not Available
aromatics, <1% naphtalene
tar acids, 3,5-xylenol fraction Not Available
15.1. Safety, health and environmental regulations / legislation specific for the substance or mixture
Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, aromatics (2-25%)- is found on the following regulatory lists
Not Applicable
Hydrocarbones, C10, aromatics, <1% naphtalene is found on the following regulatory lists
Continued...
Part Number: 571604 (25L steel drums) Page 15 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
Not Applicable
This safety data sheet is in compliance with the following EU legislation and its adaptations - as far as applicable - : Directives 98/24/EC, - 92/85/EEC, - 94/33/EC,
- 2008/98/EC, - 2010/75/EU; Commission Regulation (EU) 2020/878; Regulation (EC) No 1272/2008 as updated through ATPs.
ECHA SUMMARY
Ingredient CAS number Index No ECHA Dossier
dichlorotoluene 29797-40-8* Not Available Not Available
Harmonisation (C&L
Hazard Class and Category Code(s) Pictograms Signal Word Code(s) Hazard Statement Code(s)
Inventory)
1 Skin Irrit. 2; Aquatic Chronic 2 GHS09; GHS07; Wng H315; H411
2 Skin Irrit. 2; Aquatic Chronic 1 GHS09; GHS07; Wng H315; H410
Harmonisation Code 1 = The most prevalent classification. Harmonisation Code 2 = The most severe classification.
Acute Tox. 3; Acute Tox. 3; Skin Corr. 1B; Skin Sens. 1; Eye Dam. GHS09; GHS05; GHS06; H301; H311; H314; H317;
1
1; Aquatic Chronic 2; Skin Sens. 1B; Muta. 1B; Carc. 1B Dgr; GHS08 H411; H340; H350
Harmonisation Code 1 = The most prevalent classification. Harmonisation Code 2 = The most severe classification.
Continued...
Part Number: 571604 (25L steel drums) Page 16 of 17 Issue Date: 02/08/2021
Version No: 10.34 Print Date: 28/01/2022
CARBON REMOVER
CONTACT POINT
- For quotations contact your local Customer Services - http://wssdirectory.wilhelmsen.com/#/customerservices - - Responsible for safety data sheet Wilhelmsen
Ships Service AS - Prepared by: Product HSE Manager, - Email: Email: WSS.GLOBAL.SDSINFO@wilhelmsen.com - Telephone: Tel.: +31 10 4877775
Other information
Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch
Classification committee using available literature references.
The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks
in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available
engineering controls must be considered.
For detailed advice on Personal Protective Equipment, refer to the following EU CEN Standards:
EN 166 Personal eye-protection
EN 340 Protective clothing
EN 374 Protective gloves against chemicals and micro-organisms
EN 13832 Footwear protecting against chemicals
EN 133 Respiratory protective devices
end of SDS