Professional Documents
Culture Documents
movingwalk_1909
movingwalk_1909
TC series
Moving Walk
• The data given in this catalogue are subject to change without notice.
• Revised publication effective Oct. 2019
GK-F200(0) –10.10-2000-19.10
TOSHIBA ELEVATOR AND BUILDING SYSTEMS COPORATION
The concept of
SOLUTIONS
Through year of experience for escalator technology,
"Moving Walk" has brought about enjoyable gliding comfort.
Toshiba Elevator and Building Systems Corporation has built a framework which encom-
passes all aspects from system development to production, sales to marketing, installation,
adjustment, maintenance and services in order to provide clients with the highest quality
products and services.
Utilizing the comprehensive technological infrastructure developed by Toshiba Group in
more than 140 years since its foundation, we aim to enhance the leading edge technology
and quality that we used to develop the ultra high speed elevator, harnessing Toshiba’s
technological innovations to their fullest extent. To meet clients’ expectations and
requirements for safe and pleasant elevators as well as constantly pursuing further
innovation and improvement. Furthermore, we are aiming to strengthen system
development, production, enhancing sales channel and sales partnership to expand in the
global market.
1 2
Basic specifications
Typical specification Exterior specifications ○ : STANDARD △ : OPTIONAL
STANDARD OPTIONAL
12 Motor overheat protection device ○
13 Pallet sag safty device △
Black color Other six color
14 Broken pallet chain detection device ○ Slope type
15 Auxiliary brake △ Upper floor
16 Stopping distance detector ○
○
Emergency stop
17 Pallet missing detector STOP BUZZER UP DOWN
950
WP
(Note 1)
S800 S1000
J
1140 Upper (Drive unit) side support
Floor height
Angle (L200×200×20)
900
815 (Fixed)
Truss height H
R2
Lower (Slave) side support
500
(Fixed)
950
R4
Back fastening plate
50
WP R3 (5-L75×75×9-75)
Pit depth
J
200
1105
1005
(Note 1)
Truss width R
Slope type S1000 S800
Moving walk width (mm) 1558 1350
Handrail width (mm): C to C
Nut for anchor bolt
1222 1022
J
(6-M24)
Reaction value at support (Slope type S1000) Bordering plate Arrangement by factory
Finished floor (including anchor bolts)
55
100
Truss height (mm)【H】 3000 to 4053 4081 to 5994 6022 to 9015
Adjusting plate(t5)
Mid-support position (mm) 【L1】 9295 10078 10860 9295 10078 10860 * Note 1 Anchor plate(t20)
Arrangement by customer
Mid-support position (mm) 【L2】 ー 7043 8607 9390 10123 * Note 1 Angle 120 Anchor bolt(M16)
(L200×200×20)
Reaction value (N) 【R1】
50±10
63800 77000 * Note 1 200 40
Anchor bolt(M12)
250
Reaction value (N) 【R2】 41500 61600 * Note 1
Reaction value (N) 【R3】 100600 96200 * Note 1
Reaction value (N) 【R4】 ー 102600 * Note 1
*Note1: Please contact to our local distributor to details of truss height over 6022mm in length.
Slope type S1000
Works by others
Slope type S800 is similer to the above of S1000, but it is not applicable floor height 5995mm to 9015mm (truss height 6022mm to 9015mm). Works not included in installation contract
1. Any structual works such as opening floors for accommodating the escalators, or installation of necessary support beams.
Moving walk width 1558 Standard distance between supports L+100
Flat type Handrail width C to C 1222 50 L 50
2. Finishes for peripheral architecture after installatio.
Pallet width 1015 519 832 X 832 519
3. Pit waterproofing work.
R2 R1
4. Installation of handrails, fences, or other safety features around the movingwork.
950
Note 1 Note 1
5. Moving walk truss exterior cladding work ; bottom illumination work. (A though these are not included within the scope of the standard intallation contract,
548
648
(Note 2)
1105
1205
5 6