Professional Documents
Culture Documents
OrionMX-Datasheet_042822
OrionMX-Datasheet_042822
OrionMX-Datasheet_042822
The OrionMX is the smallest member of the Orion family Key Features
of automation platforms. It is designed for applications in • All connections and diagnostic LEDs on the front face
smaller distribution substations, pole top, and vaults. It is • Universal mounting: surface or DIN rail
also designed for OEM applications, protocol conversion and
• Hardware options configured in software
general infrastructure monitoring.
• Runs the same firmware, software options and security of
other Orions
SFP Ethernet RJ45 Ethernet Two RS-232/485 Ports, 7" Wide, 2" High, 6" Deep.
Port Switch or S/W Selectable 2RU or 3RU Expansion
two NICs Cases available
IRIG-B Modulated
or Unmodulated
USB Maintenance Port
Group of Eight Inputs. Three Isolated Outputs, Wide Range AC/DC and Low Power Out
Range S/W Selectable, Two Form A, Voltage DC Power Supplies 12V @1A
12-48V dc or 125DC normal One Form C available
Mounting bracket
can slide along
extrusion slots
Specifications
Processor
CPU 800MHz Maintenance Ports USB Type B Connector
with cryptographic cypher engines Discrete Inputs (8) LV: 12-48dc, HV: 125V dc
Discrete Outputs (2) Form A, (1) Form C
Event Storage (non volatile) 500K Rated to 125V dc for trip duty
Client/Master IEC 61850, DNP3, Modbus, SPA, #2: 12-24V dc, +/- 20%
IEC 60870-101/104, SNMP Manager,
plus other legacy protocols Power Output
for accessories 12V dc @ 1A
Time Synchronization IRIG-B Mod/Unmod, Time Zone,
UTC/Local, NTP (Client and Server), Power Required 10 Watts (typical)
send synch to SEL® relays 15 Watts (max)
Software Options
Math and Logic Secure Passthrough
Function Block and Ladder Diagram available in IEC 61131-3. Text-based Secure access can be established to attached relays, reclosers and other
“LUA” also available. Pre-canned Math & Logic routines available for OR, IEDs.
AND, Local/Remote and simple Calculator.
Comm Processor Emulation and Data Logger
DA Logic (FLISR) The OrionMX can operate like an SEL® relay communication processor
A pre-engineered automation function is available to identify faulted line to access SEL relays and automatically retrieve event reports.
section, isolate, and power unfaulted section from second source.
Cascading Software
Alarm, Archive and Tile Annunciator Enables multiple Orions to operate as a single automation processor,
Sequence of Events time stamping to 1ms, plus complete alarm package without any points mapping in-between, and with a single configuration
available. Pre-engineered, web-based, s/w-defined Alarm Tile Annunciator program.
reduces development time.
Hot Standby Redundancy
Custom SVG Webpages Enables a pair of Orions to serve as a “Primary” and “Secondary”.
User-defined pages can display real time data or accept user controls. Supports all Orion applications: SCADA, HMI, Alarming, etc. Includes
features to simplify set-up, operation and diagnostics.
Email
Alarm messages, diagnostics, or SEL® relay event records can be emailed Configuration Backup
out to single or grouped users. The configurations in Orion and in attached SEL® relays can be
automatically accessed and sent out as an email or in a secure file
transfer. A secure checksum can be used to identify any configuration
changes.
Copyright © 2022 NovaTech, LLC. All rights reserved. All brand and product names
mentioned in this document are trademarks of their respective owners. SEL is a
registered trademark of Schweitzer Engineering Laboratories. NovaTech is a registered
trademark of NovaTech, LLC. OrionLXm and OrionLX are trademarks of NovaTech, LLC.
The information in this literature is subject to change without notice and is not to be
construed as a warranty. OrionMX Datasheet_042822