Professional Documents
Culture Documents
10373 Technical Bulletin 4 2014
10373 Technical Bulletin 4 2014
ID OD OD
Dimensions shown are actual not nominal inside and outside diameters
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com
Technical Bulletin 4 (2014)
Product Information
KEY FEATURES:
Specific products for adapting in the direction of flow.
* Male B.S.P
212.15
200.15.40
* 200.125.40
213.125
Female B.S.P
DN100 Cast Iron pipe 110mm PVC-u
Clay or Cement 100.4.40
40mm PVC-u 1 1/2" Iron
* 200.15.40
213.15
Female B.S.P
9119.B
126.4.12
213.2
Female B.S.P
225.15
225.2
110P.6
Note: Pipes to be chamfered and lubricated when being used with ring seal, use 9136.250L Silicone grease.
* Use PTFE on threads.
References
1. Terrain Soil and Waste Product Installation
2. BSEN12056 Gravity drainage systems inside buildings Sanitary pipework, layout and calculation.
If in doubt ask - Technical 01622 795200
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com
Technical Bulletin 4 (2014)
Technical Bulletin No.4 (2014)
Product Information
KEY FEATURES:
Specific products for adapting in the direction of flow.
912.63 923.6356
ID-76mm / 3"
OR
90mm HDPE 90mm FUZE (HDPE)
Vulcathene 900.90.30
912.90 927.90
Note: Pipes to be chamfered and lubricated when being used with ring seal, use 9136.250L Silicone grease.
* Use PTFE on threads.
References
1. Terrain Soil and Waste Product Installation
2. BSEN12056 Gravity drainage systems inside buildings Sanitary pipework, layout and calculation.
If in doubt ask - Technical 01622 795200
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com
Technical Bulletin 4 (2014)
Product Information
KEY FEATURES:
Specific products for adapting in the direction of flow.
56mm FUZE (HDPE) 56mm PVC-u 50mm Db12 50mm FUZE (HDPE)
900.56.30 200.2.40 AS650053PY 900.50.30
927.50
225.2
110mm Db12
AS650113PY
or 110mm FUZE (HDPE)
32mm PVC-u 40mm FUZE (HDPE)
110mm PVC-u 900.110.30
200.125.40 900.40.30
100.4.40
PS38 927.110
223.2.15 927.56
6790 927.50
927.56
Note: Pipes to be chamfered and lubricated when being used with ring seal, use 9136.250L Silicone grease.
* Use PTFE on threads.
References
1. Terrain Soil and Waste Product Installation
2. BSEN12056 Gravity drainage systems inside buildings Sanitary pipework, layout and calculation.
If in doubt ask - Technical 01622 795200
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com
Technical Bulletin 4 (2014)
Technical Bulletin No.4 (2014)
Product Information
KEY FEATURES:
Specific products for adapting in the direction of flow.
AS334003 210.15
200.2.40
AS523015 210.2
225.15
927.32 927.40
225.15 927.50
Note: Pipes to be chamfered and lubricated when being used with ring seal, use 9136.250L Silicone grease.
* Use PTFE on threads.
References
1. Terrain Soil and Waste Product Installation
2. BSEN12056 Gravity drainage systems inside buildings Sanitary pipework, layout and calculation.
If in doubt ask - Technical 01622 795200
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com
Technical Bulletin 4 (2014)
Product Information
KEY FEATURES:
Specific products for adapting in the direction of flow.
SRD100 *
110P.4 ARD100110 *
SRD150 *
110P.6
ARD150160 *
SRD100 *
4D20D ARD100110 *
SRD150 *
6D20D
ARD150160 *
Note: Pipes to be chamfered and lubricated when being used with ring seal, use 9136.250L Silicone grease.
* Use PTFE on threads.
References
1. Terrain Soil and Waste Product Installation
2. BSEN12056 Gravity drainage systems inside buildings Sanitary pipework, layout and calculation.
If in doubt ask - Technical 01622 795200
T: 01622 795200
E: commercialenquiries@polypipe.com www.terraindrainage.com