Professional Documents
Culture Documents
Short Form 2015 Integrated circuit
Short Form 2015 Integrated circuit
Network
TOREX SEMICONDUCTOR
—supplying cutting edge,
high performance power supply ICs
to every corner of the world.
1. The products and product specifications contained herein are subject to change
without notice to improve performance characteristics. Consult us, or our
representatives before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
A specialist in Analog power supply IC design,
3. Please ensure suitable shipping controls (including fail-safe designs and aging
development and manufacturing. protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges. Should you
TOREX SEMICONDUCTOR
Marketing & was established in 1995 and Torex wish to use the products under conditions exceeding the specifications, please consult
Quality
Management
Earning Customers trust with the world’s
highest levels of quality control
and environmentally friendly products.
SHORT
FORM
2015
Contents ____________________________________________________________________________________________
Converters XC9266 COT Control, 6.0A Synchronous Step-Down DC/DC Converters Under development-2
Step-Up DC/DC Converters XC9141/XC9142 Load Disconnection Function, 0.8A Step-up DC/DC Converters Under development-3
Voltage Regulators XC6230 Very Low ON Resistance 2A High Speed LDO with Reverse Current Protection Under development-4
XC6236 300mA Ultra Small, High Speed LDO with Built-in Inrush Current Protection Under development-5
XC6702 36V Input, 300mA Low Quiescent Current High Speed LDO Regulator Under development-6
XC6703 60V Low Power Consumption, High-Speed Load Transient, 200mA Voltage Regulators Under development-7
Multi Chip Module XCM413 36V Input 300mA Low Quiescent Current High Speed LDO Regulator with Watchdog Timer Under development-8
Diodes XBP TVS Diode
Under development-9
XBGS1 1.0A Rectifier Diode
XBFUS1 1.0A Fast Recovery Diode Under development-10
1. Off-line Controllers for LED XC9401 Off-line Controllers for LED Lighting 1
Lighting NEW XC9404 Offline Controller for LED Lighting with Power Factor Correction 2
2. LED Backlight Driver XC9133 Step-Up DC/DC Converter-LED Backlight Driver 3
3. Schottky Diodes XBS Schottky Barrier Diode 4
4. TVS Diodes XBP 4 elements Transient Voltage Suppressor 15
5. Bridge Diode XBR11A 1.0A Single-Phase Bridge Rectifier 21
XBR12A 1.5A Single-Phase Bridge Rectifier 21
6. Switching Diodes XBW21P0204 Switching Diode 22
7. Zener Diodes NEW XBZ Zener Diode 23
8. Power MOSFETs XP151/XP161 Power MOSFET (N channel) 25
XP152/XP202/XP162 Power MOSFET (P channel) 26
9. Inductor Built-in XCL101 100mA Inductor Built-in Step-Down "micro DC/DC" Converters 27
micro DC/DC Converters XCL201/XCL202 400mA Inductor Built-in Step-Down “micro DC/DC” Converters 28
XCL205/XCL206/XCL207 600mA Inductor Built-in Step-Down “micro DC/DC” Converters 29
XCL208/XCL209 400mA Inductor Built-in Step-Down “micro DC/DC” Converters 30
NEW XCL210 50mA Inductor Built-in Step-Down “micro DC/DC” converter 31
NEW XCL211/XCL212 2.0A Inductor Built-in Step-Down "micro DC/DC" Converters 32
XCL213/XCL214 1.5A Inductor Built-in Step-Down "micro DC/DC" Converters 33
NEW XCL219/XCL220 1.0A Inductor Built-in Step-Down “micro DC/DC” Converters 34
10. Step-Down DC/DC XC6365/XC6366 PWM Control, PWM/PFM Switchable Step-Down DC/DC Controller 35
Converters and XC9213 25V Input Synchronous Step-Down DC/DC Controller IC 36
Controller ICs XC9220/XC9221 16V Input Step-Down DC / DC Controller ICs 37
XC9223/XC9224 1A Synchronous Step-Down DC / DC Converters 38
XC9235/XC9236/XC9237 600mA Synchronous Step-Down DC/DC Converters 39
XC9242/XC9243 2A Synchronous Step-Down DC/DC Converters 40
XC9244/XC9245 400mA Synchronous Step-Down DC/DC Converters 41
XC9246/XC9247 1A 16V Driver Transistor Built-in Step-Down DC/DC Converters 42
XC9248 2.2A 18V Driver Transistor Built-In Synchronous Step-Down DC/DC Converter 43
XC9252 Operating Ambient Temperature: +105℃, 30V Operation Low Quiescent Current Step-Down DC/DC Controller IC 44
NEW XC9257/XC9258 1A COT Control, Synchronous Step-Down DC/DC Converters 45
NEW XC9259 Ultra Small, 1A COT Control, Synchronous Step-Down DC/DC Converters 46
XC9260/XC9261 1.5A COT Control, Synchronous Step-Down DC/DC Converters 47
NEW XC9262 Ultra Small, 1.5A COT Control, Synchronous Step-Down DC/DC Converters 48
NEW XC9265 Ultra Low Power Synchronous Step-Down PFM DC/DC Converter 49
XC9270/XC9271 30V Driver Transistor Built-in Step-Down DC/DC Converters 50
11. Step-Up DC/DC XC6367/XC6368 PWM Control, PWM/PFM Switchable Step-up DC/DC Controller 51
Converters and XC6371/XC6372 PWM, PWM/PFM Control Step-Up DC/DC Converters from 1 Cell 0.9V 52
Controller ICs XC9103/XC9104/XC9105 Step-up DC/DC Controller IC 53
XC9106/XC9107 Variable Output Voltage Step-up DC/DC Controller IC 54
XC9110/XC9111 PFM Step-Up DC/DC Converters from 1 Cell 0.9V 55
XC9119 1MHz, PWM, Step-Up DC/DC Converter 56
XC9120/XC9121/XC9122 Step-Up DC / DC Controller IC, Max Duty 93% 57
XC9128/XC9129 1A Driver Transistor Built-in, Step-Up DC/DC Converters 58
XC9131 1A Driver Transistor Built-in, Step-Up DC/DC Converters with Load Disconnection Function (FB product) 59
XC9135/XC9136 1A Driver Transistor Built-in, Step-Up DC/DC Converters with Load Disconnection Function (VOUT product) 60
XC9140 PFM Control, Step-Up Synchronous DC/DC Converter (UVLO Function) 61
12. Step-Up&Down DC/DC XC9301/XC9302 PWM, PWM/PFM Switching Step-Up & Down DC/DC Converters 62
Controller ICs XC9303 Synchronous Step-Up & Down DC / DC Controller ICs 63
NEW XC9306 Synchronous Buck-Boost DC/DC Converters 64
13. Multi channel DC/DC XC9501 2 Channel Output Step-Up DC/DC Controller IC 65
Converters and XC9502 2 Channel Output Step-Up / Down DC/DC Controller IC 66
Controller ICs XC9503 2 Channel Output Step-Down DC/DC Controller IC 67
XC9504 2 Channel Output Step-Up / Inverting DC/DC Controller IC 68
XC9505 2 Channel Output Step-Down / Inverting DC/DC Controller IC 69
XC9515 800mA 2ch Output Synchronous Step-Down DC/DC Converter (Built-in VD) 70
XC9516 Triple Output Power Supply for TFT-LCD 71
XC9519 Dual Output Step-Up/Inverting DC/DC Converter 72
14. Voltage Detectors XC61C/XC61G Standard Voltage Detector 73
XC61F/XC61H Delay Circuit Built-in Voltage Detector 74
XC6101~05, XC6111~15 Voltage Detectors with Watchdog Timer & Manual Reset 75
XC6118 Voltage Detector with Separated Sense Pin & Delay Capacitor Pin 76
XC6119 Voltage Detector with Delay Capacitor Pin 77
XC6120 Ultra Small, Low Quiescent Current Voltage Detector 78
XC6121~24 Voltage Detector with Watchdog and CE Pin 79
XC6126 Ultra Small, Highly Accurate, Single Voltage Detector 80
XC6127 Ultra Small Voltage Detector with High Precision Delay Circuit and Manual Reset Function 81
Contents-1
_____________________________________________________________________________________________________ ●
14. Voltage Detectors XC6129 Voltage Detector with Delay Time Adjustable 82
XC6130/XC6131 Watchdog Timeout Period Externally Adjustable Voltage Detector (+125°C) 83
Delay capacitor adjustable, sense pin isolation, surge voltage protection
NEW XC6132 84
and hysteresis external adjustment
NEW XC6133 Capacitor delay type voltage detectors with sense pin isolation 85
Delay capacitor adjustable voltage detectors with sense pin isolation
NEW XC6134 86
and Hysteresis external adjustment
15. Reboot IC NEW XC6190 Push Button Reboot Controller 87
16. Voltage Regulators XB1085 3A 3 Terminal Voltage Regulator 88
Single Type XB1086 1.5A 3 Terminal Voltage Regulator 89
XB1117 1A 3 Terminal Voltage Regulator 90
NEW XC62FJ 10V Input, 200mA Low Consumption Current Regulator 91
XC6201 10V Input 3 Terminal Voltage Regulator 92
XC6203 400mA 3 Terminal Voltage Regulator 93
XC6204/XC6205 300mA High Speed LDO Regulators with CE Pin 94
XC6206 1μA Low Power 3Terminal Voltage Regulator 95
XC6209 300mA High Speed LDO Regulators with CE Pin 96
XC6210 700mA High Speed LDO Regulator with CE Pin 97
XC6213 150mA High Speed LDO Regulator with CE Pin, Ultra Small Package 98
XC6214 500mA High Speed 3 Terminal Regulator, Thermal Shutdown 99
XC6215 0.8μA Low Quiescent Current Voltage Regulator with CE Pin 100
XC6216 28V Input Voltage Regulators with CE Pin 101
XC6217 200mA High Speed "Green Operation" LDO Voltage Regulator 102
XC6218 200mA Low Power Consumption LDO Regulator 103
XC6219 300mA High Speed LDO Regulators with CE Pin 104
XC6220 1A High Speed LDO Voltage Regulator with “GreenOperation” 105
XC6221 200mA High Speed LDO Voltage Regulator with CE Pin 106
XC6222 700mA High Speed LDO Regulator 107
XC6223 300mA High Speed LDO Voltage Regulator with Built-in Inrush Current Protection 108
XC6224 1.2V Low Voltage Operation,150mA High Speed LDO Voltage Regulator 109
XC6225 30mA High Speed LDO Regulator 110
XC6227 700mA High Speed LDO Regulator with Reverse Current Protection 111
XC6229 300mA Ultra Small High Speed LDO Regulator with Built-in Inrush Current Protection 112
NEW XC6231 10V Input 500mA High Speed LDO Regulators 113
XC6233 200mA High Speed LDO Voltage Regulator with Built-in Inrush Current Protection 114
XC6501 CL Capacitor-less, 200mA High Speed LDO Regulator 115
XC6503 CL Capacitor-less, 500mA Low Quiescent Current High Speed LDO Regulator 116
XC6504 0.6μA Ultra Low Quiescent Current Small Voltage Regulator (CL Capacitor-Less) 117
XC6505 Low Quiescent Current, 200mA High Speed LDO Regulator - 10.5V Input 118
XC6601 400mA Low Voltage Input LDO Voltage Regulator with CE Pin 119
XC6602 1A, 0.5V Input Voltage, High Speed LDO Regulator 120
1A, 0.5V Low Input Voltage, High Speed LDO Regulator
XC6603 121
(Adjustable Soft-start)
1A, 0.5V Low Input Voltage, High Speed LDO Regulator
XC6604 122
(Adjustable Current Limit)
XC6701 28V Operation High Speed Voltage Regulators with Stand-by Function 123
XC62KN Negative Voltage Regulator 124
XC6901 200mA Negative Voltage Regulator with ON/OFF Control 125
XC6902 -16V Input Three Terminal Negative High Speed Voltage Regulator 126
17. Voltage Regulators XC6411/XC6412 0.8μA Low Quiescent Current Dual Voltage Regulators 127
Dual Type XC6415 200mA Dual High Speed LDO Regulator with CE Pin 128
XC6416 200mA Dual High Speed LDO Voltage Regulator with “GreenOperation” 129
XC6419 Dual High Speed LDO Regulator (ch1: 300mA, ch2: 100mA) with ON/OFF Switch 130
XC6420 150mA Small Dual LDO Regulator with ON/OFF Switch 131
XC6421 300mA Small High Speed Dual LDO Regulator, Built-in Inrush Current Protection 132
XC6423 Ultra Small 300mA Dual High Speed LDO Regulator with Inrush Current Protection 133
18. Voltage Regulators XC6402 700mA High Speed LDO Regulator with Voltage Detector and CE Pin 134
Voltage Detect Type XC6403/XC6404 500mA High Speed LDO Regulators with Voltage Detector 135
XC6405 500mA High Speed LDO Regulator with Voltage Detector and CE Pin 136
XC6408 28V Operation Voltage Regulator with Voltage Detector 137
XC6413/XC6414 500mA High Speed LDO Regulators with Voltage Detector 138
19. Load Switch XC8101 Low Quiescent Current Load Switch 139
XC8102 400mA Small Load Switch with CL Discharge 140
XC8107 85mΩ High Function Power Switch (Fixed Current Limit) 141
XC8108 85mΩ High Function Power Switch with Current Limit Adjustable Pin (0.9A~2.4A Current Limit Adjustable) 142
XC8109 85mΩ High Function Power Switch with Current Limit Adjustable Pin (0.075A~1.3A Current Limit Adjustable) 143
20. Charge Pump ICs XC6351A Inverter Charge Pump 144
XC9801/XC9802 Step-Up Charge Pump 145
21. Battery Charge IC XC6801 500mA 1 Cell Li-ion and Li-Po Battery Linear Charger IC with Constant-Current/Constant-Voltage 146
XC6802 800mA 1 Cell Li-ion and Li-Po Battery Linear Charger IC with Constant-Current/Constant-Voltage 147
One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
NEW XC6803 148
(CC Charge:40~280mA)
One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
NEW XC6804 149
(CC Charge:200~800mA)
One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
NEW XC6805 150
(CC Charge:5~40mA)
Contents-2
Contents ____________________________________________________________________________________________
22. Multi Chip Module XCM406 700mA Dual High Speed LDO Regulator 151
XCM517 600mA Synchronous Dual Output Step-Down DC/DC Converter 152
XCM519 600mA Synchronous Step-Down DC/DC Converter + Low Voltage Input LDO 153
XCM526 3A Step-Down DC/DC Converter with 16V Input 154
23. Temperature Sensors XC3101 Analog Temperature Sensor 155
24. Hall IC (Magnetic Sensor) XC3202B Low Quiescent Current Hall IC (Magnetic Sensor) 156
25. Oscillator IC XC2163 3rd Overtone Crystal Oscillator IC 157
XC2164 Fundamental Crystal Oscillator IC 158
XC2301 Tri-State Buffer ICs 159
26. PLL Clock Generator XC2173 PLL Built-in Crystal Oscillator IC 160
ICs XC25BS7 PLL Clock Generator ICs with Built-in Divider/Multiplier Circuits 161
XC25BS8 Ultra Small PLL Clock Generator ICs with Built-in Divider/Multiplier Circuits 162
27. Packaging Information, Reference Pattern
Reference Pattern 163
Layout Dimensions
Layout Dimensions
Package Power Package Power Dissipation 166
Dissipation
Successor Products
The recommended products are pin to pin and improved from the current Product Information
products. SERIES CATEGORY
CURRENT RECOMMENDED XC61 Voltage Detectors
TYPE
PRODUCT PRODUCT
High Speed Voltage Regulators
XC6108 XC6118 XC62
Voltage Detectors (Before 2007, single voltage regulators)
XC6109, XC6119 XC6129
XC6202 XC6216D Dual Voltage Regulators, Voltage Regulators with
Voltage Regulators XC64
Single Type XC6207 XC6217 Voltage detect Function
Voltage Regulators XC6415 Low Quiescent Current/Middle Speed Voltage
XC6401 XC65
Dual Type XC6420 Regulators
Step-Up DC/DC XC66 Low Voltage Output Regulators
XC9116 XC9133
Converters XC67 Middle and High Voltage Regulators
XC9215 (600kHz) XC9225 XC68 Battery Charge IC
XC9215 (1.2MHz) XC9235 XC69 Negative Voltage Regulators
Step-Down DC/DC XC9216 (600kHz) XC9226 XC81 Line Switchs
Converters XC9216 (1.2MHz) XC9236 XC63 DC/DC Converters (Before 2000)
XC9225/XC9226 XC9235/XC9236
XC91 Step-Up DC/DC Converters
XC9250/XC9251 XC9270/XC9271
XC92 Step-Down DC/DC Converters
XBS204S17R-G XBS204V19R-G
XBS303V19R-G XC93 Step-Up&Down DC/DC Converters
Schottky Barrier
XBS303V17R-G XC95 Multi Channel DC/DC Converters
Diodes XBS303V29R-G
XBS304S17R-G XBS304S19R-G XC98 Charge Pumps
XCL Inductor Built-in micro DC/DC Converters
Please be noted that the recommended products are not pin to pin XCM Multi Chip Modules
comatible. XB10 3-Terminal Regulators(Bipolar)
CURRENT RECOMMENDED XP15/20/16 Power MOSFETs
TYPE
PRODUCT PRODUCT XBS Schottky Barrier Diodes
Voltage Detectors XC6116/XC6117 XC6127 XBP TVS Diodes
Voltage Regulators XC62FP XC6201 XC21 Oscillator ICs
Temperature XC23 Clock Buffer, VCXO ICs
XC31BP XC3101
Sensors XC25 PLL Clock Generators
XC31 Temperature Sensors
XC32 Hall IC (Magnetic Sensor)
SERIES
① ② ③ ④ ⑤⑥ ⑦ ① ② ③ ④⑤⑥ ⑦ ① ② ③ ④⑤⑥ ⑦
①Product Name : Voltage Detector ①Product Name : Voltage Regulator ①Product Name : Step-down DC/DC Convertor
②Output : CMOS Output ②Type of regulator : B=CL auto discharge ②Type : B=high-speed soft-start, auto discharge
③Detect Voltage : 40=4.0V Detect ③Output Voltage : 30=3.0V Fixed ③Output Voltage : 18=1.8V Fixed
④Output Voltage Accuracy : 2=±2% ④Output Voltage Accuracy : 1=±1% ④Oscillation Frequency : D=3MHz
⑤Package : H=USP-3 ⑤Package : G=USP-4 ⑤Package : E=USP-6C
⑥Device Orientation : R=Standard feed ⑥Device Orientation : R=Standard feed ⑥Device Orientation : R= Standard feed
⑦EU RoHS Compliant, Pb Free ⑦EU RoHS Compliant, Pb Free ⑦EU RoHS Compliant, Pb Free
Contents-3
_____________________________________________________________________________________________________ ●
Definition of Torex
Halogen free : According to IEC 61249-2-21 definition
Bromine(Br) content≦900ppm
Chlorine(Cl) content≦900ppm
Total Halogens≦1500ppm
Antimony Free
Antimony(Sb) content≦900ppm
How can I order Halogen & Antimony free products from Torex
Please add “-G” at the end of part number.
e.g.) XC6221B332MR-G
Produ ts Part Numbers Descriptions
Part number today XC6221B332MR Torex Products are 100% compliant with RoHS.
Halogen & Antimony free XC6221B332MR-G Halogen & Antimony free products are automatically compliant to RoHS.
Description of change
With the exception of certain products, we previously used bromine (Br) and antimony (Sb) as flame retardants in resin.
We have changed the flame retardants used in these target products to an H&A-free material that is not Br or Sb. The flame resistance grade
of the resin is UL94V-0, as it was previously.
In addition, the electrical characteristics, mounting conditions, and other characteristics of the products are all equivalent to the previous
products.
Reliability is also the same, and we have conducted reliability tests on typical products of each series to verify that there are no problems.
RoHS Compliance
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr+6)
Polybrominated Biphenyls (PBB)
Polybrominated Biphenylethers (PBDE)
Hexabromocyclododecane (HBCDD)
Di- (2-ethylhexyl) phthalate (DEHP)
Dibutyl phthalate (DBP)
Butyl benzyl phthalate (BBP)
Contents-4
Selection Guide
■ Packaging Information
Selection Guide
2.5 ± 0.1
p=0.55
2.5 ± 0.1
Magnified View
(Unit:mm)
1.2 ± 0.05
1.4 ± 0.05
p=0.4 p=0.4 p=0.4
2.95 ± 0.2
3.0 ± 0.1
3.0 ± 0.1
Actual Size Magnified Actual Size Magnified Actual Size Magnified
QFN-0601 +0.075
2.0 −0.05 QFN-20 4.0 ± 0.1 QFN-24 4.0 ± 0.1
p=0.65
4.0 ± 0.1
4.0 ± 0.1
2.0 −0.05
2.6 ± 0.1
1.6 ± 0.1
Actual Size Magnified Actual Size Magnified Actual Size Magnified
p=1.27 p=1.27
1.4 ± 0.1
4.9 ± 0.2
2.8 ± 0.2
2.8 ± 0.2
1.5
p=1.3
4.35 MAX
p=1.5 p=1.5
2.1 ± 0.3
Selection Guide-1
9.35 − 10.45
p=0.65 p=2.28 p=0.65
2.1 ± 0.3
5.1 ± 0.2
Actual Size Magnified Actual Size Magnified Actual Size Magnified
※(± 0.08)
1.2 ± 0.05
1.2 ± 0.08
0.6 ± 0.05
1.45 ± 0.05
1.8 ± 0.05
1.2 ± 0.05
p=0.5 p=0.3 p=0.4
p=0.55 p=0.65
3.2 ± 0.1
Actual Size Magnified Actual Size Magnified Actual Size Magnified
2.5 ± 0.05
p=0.65
2.9 ± 0.05
2.7 ± 0.05
p=0.5 p=0.65/0.5
0.9 ± 0.05
p=0.4 p=0.55
4.7
p=0.45
1.3 ± 0.05
p=0.4 p=0.65
1.0
1.26 ± 0.04
*Under development
Selection Guide-2
Selection Guide-3
________________________________________________________________________________________________________________ ●
Selection Guide
SERIES VR(V) IF(A) VF(TYP.) IR(MAX.) Ct@,f=1MHz(pF) PACKAGE PAGE
XBS204V19R-G 40 2 0.46V@2A 0.1μA@VR=40V - SMA-XG
8
XBS303V19R-G 30 3 0.355V@3A 3mA@VR=30V 385(VR=1V) SMA-XG
XBS303V29R-G 30 3 0.39V@3A 600μA@VR=30V - SMA-XG
9
XBS304S19R-G 40 3 0.465V@3A 300μA@VR=40V 180(VR=1V) SMA-XG
XBS013V1DR-G 30 0.1 0.37V@10mA (MAX.) 7μA@VR=10V - USP-2B01
10
XBS013R1DR-G 30 0.1 0.46V@10mA (MAX.) 0.3μA@VR=10V - USP-2B01
XBS013S1CR-G 30 0.1 0.71V@100mA 2μA@VR=25V - USP-2B02
11
XBS013P11R-G 30 0.1 0.35V@10mA (MAX.) 10μA@VR=10V - SOD-923
XBS023P11R-G 30 0.2 0.50V@200mA (MAX.) 100μA@VR=30V - SOD-523P
12
XBS053P11R-G 30 0.5 0.49V@500mA (MAX.) 100μA@VR=20V 20(VR=10V) SOD-323P
XBS104P11R-G 40 1 0.56V@1A (MAX.) 500μA@VR=40V 230(VR=0V) SOD-123P
13
XBS304F11R-G 40 3 0.45V@3A (MAX.) 2mA@VR=40V - SMA-PG
XBS306P11R-G 60 3 0.75V@3A (MAX.) 100μA@VR=60V - SMA-PG 14
TVS Diodes
BREAKDOWN LEAKAGE INTER-TERMINAL
SERIES TYPE ESD DURABILITY PACKAGE PAGE
VOLTAGE (MIN.) CURRENT (MAX.) CAPACITY
XBP06V4E4GR-R 4 Line 6.4V 1.0μA 40pF 30kV USP-4
XBP06V4E2HR-G 2 Line 6.4V 1.0μA 40pF 30kV USP-3 15
XBP06V1E4MR-G 4 Line 6.1V 2.5μA 170pF 30kV SOT-25
XBP1001 3 Line 6.2V 1.0μA 1.2pF 8kV SOT-563
XBP1004 4 Line 6.2V 1.0μA 1.2pF 8kV SOT-543 16
XBP1006 2 Line 6.0V 1.2μA 1.0pF 8kV SOT-23P
XBP1007 1 Line 27.27V 1.0μA 3.0pF 8kV SOD-323P
XBP1008 2 Line 6.0V 20.0μA 1.0pF 8kV SOT-23P 17
XBP1009 1 Line 6.0V 1.0μA 0.35pF 25kV DFN2L
XBP1010 1 Line 6.2V 1.0μA 35pF 8kV SOD-923
XBP1011 1 Line 6.0V 5.0μA 110pF 25kV SOD-523P 18
XBP1012 1 Line 13.3V 1.0μA 100pF 8kV SOD-323P
XBP1013 1 Line 6.0V 10.0μA 300pF 25kV SOD-323P
19
XBP15SRV05-G 5 Line 6.0V 5μA 0.6pF 8kV SOT-26P
STAND-OFF BREAKDOWN LEAKAGE MAX.SURGE CURRENT
SERIES TYPE PACKAGE PAGE
VOLTAGE (MIN.) VOLTAGE (MIN.) CURRENT (MAX.) (8.3ms SINGLE SINE WAVE)
400W TVS
XBP4SMAJ-G 10~70V 11.1~77.8V 1μA 40A SMA-PG 20
(Uni and Bi-Directional)
Bridge IC
SERIES TYPE VRRM Io IFSM I2t VF IR TSTG PACKAGE PAGE
1.0A Single-Phase Bridge 100 ~
XBR11A 1.0A 30A 3.735A2s(t<8.3ms) 1V(IF=1A) 10μA -55 ~ 150℃ MDIP
Rectifier 1000V
21
1.5A Single-Phase Bridge 2
XBR12A Rectifier 50 ~ 1000V 1.5A 50A 10A s(t<8.35ms) 1.1V(IF=1A) 5μA -50 ~ 150℃ SDIP
Switching Diodes
SERIES NUMBERS OF Pd VR IF trr(TYP.) VF(MAX.) Ct(MAX.) @f=1MHz PACKAGE PAGE
ELEMENTS
XBW21P0204-G 2 200mW 70V 150mA 4ns@IF=IR=10mA,irr=1mA 1.25V@150mA 1.5pF(VR=0V) SOT-323 22
Zener Diode
SERIES NUMBER OF ELEMENTS Vz(TYP.)(V@IZT) IZT IR PACKAGE PAGE
XBZ02P0751-G 1 7.5 5mA 1μA@VR=5V SOD-523P
23
XBZ02P0911-G 1 9.1 5mA 0.5μA@VR=6V SOD-523P
XBZ02P1201-G 1 12 5mA 0.1μA@VR=8V SOD-523P
24
XBZ02P3601-G 1 36 5mA 0.1μA@VR=25.2V SOD-523P
Selection Guide-4
__________________________________________________________________________________
Selection Guide
Selection Guide
Selection Guide-5
________________________________________________________________________________________________________________ ●
Selection Guide
Multi Channel DC/DC Converters/Controllers
OPERATING OSCILLATION
SERIES TYPE CONTROL OUTPUT VOLTAGE ACCURACY OUTPUT CURRENT PACKAGE PAGE
VOLTAGE FREQUENCY
100kHz
Step-up + PWM/PFM 180kHz IOUT= ~ 200mA MSOP-10
XC9501 0.9 ~ 10.0V ADJ=0.9V ±2.0% 65
Step-up Manual 300kHz (VIN=1.8V, VOUT=3.3V) USP-10
500kHz
180kHz
PWM/PFM IOUT= ~ 300mA
Step-up ADJ=0.9V ±2.0% 300kHz
Manual (VIN=1.8V, VOUT=3.3V)
500kHz MSOP-10
XC9502 2.0 ~ 10.0V USP-10
66
180kHz
PWM/PFM IOUT= ~ 1000mA
Step-down ADJ=0.9V ±2.0% 300kHz
Manual (VIN=3.3V, VOUT=1.8V)
500kHz
180kHz
Step-down+ IOUT= ~ 1000mA MSOP-10
XC9503 2.0 ~ 10.0V ADJ=0.9V 300kHz 67
Step-down (VIN=5.0V, VOUT=3.3V) USP-10
500kHz
PWM/PFM
±2.0% IOUT= ~ 20mA
Step-up Manual ADJ=0.9V 180kHz (VIN=3.3V, VOUT=15V)
XC9504 2.0 ~ 10.0V MSOP-10
300kHz 68
IOUT= ~ -20mA USP-10
Inverting ADJ=0.9V 500kHz
(VIN=3.3V, VOUT=-7.0V)
PWM/PFM IOUT= ~ 1000mA
Step-down ADJ=0.9V ±2.0% 180kHz
Manual (VIN=5.0V, VOUT=3.3V) MSOP-10
XC9505 2.0 ~ 10.0V 300kHz 69
PWM/PFM IOUT= ~ -200mA USP-10
Inverting ADJ=0.9V ±2.0% 500kHz
Manual (VIN=5.0V, VOUT=-3.3V)
DC1: VOUT1=1.2 ~ 4.0V
Step-down+ DC2: VOUT2=1.2 ~ 4.0V
XC9515 PWM 2.5 ~ 5.5V ±2.0% 1MHz 800mA QFN-20 70
Step-down Detect Voltage Range
: 2.0 ~ 5.5V
Step-up
+
XC9516 Positive and ~ 19.0V 500mA
PWM 2.5 ~ 5.5V ±1.5% 300kHz ~ 1.2MHz QFN-20 71
(Step-up DC/DC) (VIN=5.0V, VOUT=9.0V)
Negative
Charge Pump
Step-up PWM 4.0 ~ 18.0V(Step-up) 500mA@VIN=3.7V,
XC9519 2.7 ~ 5.5V ±1.5% 1.2MHz QFN-24 72
Inverting PWM/PFM -15.0 ~ -4.0V(Inverting) (VOUTP=5.0V, VOUTN=-5.0V)
Voltage Detectors
DETECT OPERATING
SERIES TYPE ACCURACY QUIESCENT CURRENT OUTPUT PACKAGE PAGE
VOLTAGE VOLTAGE
SSOT-24
0.8 ~ 1.5V ±2.0% 0.7 ~ 6.0V SOT-23
Open Drain
XC61C/XC61G Standard 0.7μA (VIN=1.5V) SOT-89 73
±2.0% CMOS TO-92
1.6 ~ 6.0V 0.7 ~ 10.0V
(±1.0%) USP-3 (XC61G only)
Open Drain SOT-23
XC61F/XC61H Delay Built-in 1.6 ~ 6.0V ±2.0% 0.7 ~ 10.0V 1.0μA (VIN=2V) SOT-89 (XC61F only) 74
CMOS TO-92 (XC61F only)
Watchdog & Open Drain SOT-25
XC6101 ~ 6111 1.6 ~ 5.0V ±2.0% 1.0 ~ 6.0V 5μA (TYP.)
Manual Reset CMOS USP-6C
Watchdog & Open Drain SOT-25
XC6102 ~ 6112 1.6 ~ 5.0V ±2.0% 1.0 ~ 6.0V 5μA (TYP.)
CMOS USP-6C
Manual Reset
XC6103 ~ 6113 Watchdog & ±2.0% 5μA (TYP.)
Open Drain SOT-25 75
1.6 ~ 5.0V 1.0 ~ 6.0V CMOS USP-6C
Manual Reset
XC6104 ~ 6114 ±2.0% 5μA (TYP.)
Open Drain SOT-25
Watchdog 1.6 ~ 5.0V 1.0 ~ 6.0V CMOS USP-6C
Open Drain SOT-25
XC6105 ~ 6115 Watchdog 1.6 ~ 5.0V ±2.0% 1.0 ~ 6.0V 5μA (TYP.)
CMOS USP-6C
Separated Open Drain USP-4
XC6118 0.8 ~ 5.0V ±2.0% 1.0 ~ 6.0V 0.8μA (VIN=2.0V) 76
Sense Pin CMOS SOT-25
External Delay Open Drain USPN-4
XC6119 0.8 ~ 5.0V ±2.0% 0.7 ~ 6.0V 0.9μA (VIN=2.0V) 77
Capacitor CMOS SSOT-24
Super Small, Open Drain USP-3
XC6120 Low Supply 1.0 ~ 5.0V ±2.0% 0.7 ~ 6.0V 0.6μA (VIN=2.0V) CMOS SSOT-24 78
Watchdog, 5μA (VIN=VDF×0.9) Open Drain SOT-25
XC6121 ~ 24 1.6 ~ 5.0V ±2.0% 1.0 ~ 6.0V 79
ON/OFF 10μA (VIN=VDF×1.1) CMOS USP-6C
Ultra Small Open Drain USPN-4B02
XC6126 1.5 ~ 5.5V ±0.8% 0.7 ~ 6.0V 0.6μA (TYP.)(VIN=1.62V) 80
High Accuracy CMOS SSOT-24
Manual Reset Open Drain USPN-4
XC6127 Function 1.5 ~ 5.5V ±0.8% 0.7 ~ 6.0V 0.6μA (TYP.)(VIN=1.62V) SSOT-24 81
CMOS SOT-25
High Accuracy
0.42μA (TYP.)
External
(at Detect VIN=3.7V) Open Drain USPN-4
XC6129 Capacitor 1.5~5.5V ±0.8% 0.7~6.0V 82
0.58μA (TYP.) CMOS SSOT-24
Delay Type
(at Release VIN=2.7V)
Manual Reset
XC6130 8.1μA (Detect)
Function 1.5 ~ 6.0V ±1.0% 1.6 ~ 5.0V Open Drain SOT-26 83
9.8μA (Release)
XC6131 EN Function
Surge Voltage
Protection, 1.28μA (TYP.) at Detect (TBD) Open Drain SOT-26
XC6132 Delay Capacitor 0.8~2.0V ±1.2% 1.6~6.0V 84
1.65μA (TYP.) at Release (TBD) CMOS USP-6C
Adjustable
Delay Capacitor
XC6133 85
Adjustable
Hysteresis 1.28μA (TYP.) at Detect (TBD) Open Drain SOT-26
1.0~5.0V ±1.2% 1.6~6.0V
External 1.65μA (TYP.) at Release (TBD) CMOS USP-6C
XC6134 86
Adjustment,
Delay Capacitor
Reboot IC
OPERATING SINK
SERIES TYPE QUIESCENT CURRENT (Stand-by) OUTPUT PACKAGE PAGE
VOLTAGE CURRENT
Ultra Low Power Consumption, Small
XC6190 Reboot Delay Time 1.65~6.0V 30mA 0.01μA Open Drain USPN-6 87
CMOS USP-6B01
(Adjustable by the external resistor)
Selection Guide-6
__________________________________________________________________________________
Selection Guide
Selection Guide
Voltage Regulators
MAX. DROPOUT
INPUT OUTPUT QUIESCENT OUTPUT
SERIES TYPE ACCURACY OUTPUT VOLTAGE PACKAGE PAGE
VOLTAGE VOLTAGE CURRENT CAPACITOR
CURRENT @100mA
1.5V,1.8V,
XB1085 Bipolar 3A ~ 12.0V 2.5V,3.3V, ±1.0% 3000mA 5000μA 1.3V@3A Tantalum TO-252 88
5.0V,ADJ
1.5V,1.8V,
XB1086 Bipolar 1.5A ~ 15.0V 2.5V,3.3V, ±1.0% 1500mA 5000μA 1.3V@1.5A Tantalum TO-252 89
5.0V,ADJ
~ 7.0V 1.8V,2.5V, 3.3V,
XB1117 Bipolar 1A ADJ ±1.0% 1000mA 6000μA 1.2V@1A Tantalum SOT-223 90
~ 10.0V 5.0V
XC62FJ Low Power 1.8~10.0V 1.7~6.0V ±2.0% 200mA 2μA 160mV Ceramic SOT-89 91
SOT-25
SOT-89
XC6201 Low Power 1.8 ~ 10.0V 1.3 ~ 6.0V ±2.0%(1.0%) 250mA 2μA 160mV Ceramic TO-92 92
USP-6B
SOT-89
SOT-223
XC6203 Large Current 2.0 ~ 8.0V 1.8 ~ 6.0V ±2.0%(1.0%) 400mA 8μA 150mV Tantalum TO-92 93
SOT-23
XC6204 High Speed 2.0 ~ 10.0V 1.8 ~ 6.0V 300mA SOT-25
±2.0%(1.0%) 70μA 200mV Ceramic USP-6B 94
XC6205 High Speed 2.0 ~ 10.0V 0.9 ~ 1.75V 150mA SOT-89-5
SOT-23
SOT-89
XC6206 Low Power 1.8 ~ 6.0V 1.2 ~ 5.0V ±2.0%(1.0%) 250mA 1μA 160mV Ceramic TO-92 95
USP-6B
SOT-25
XC6209 High Speed 2.0 ~ 10.0V 0.9 ~ 6.0V ±2.0% 300mA 25μA 200mV Ceramic USP-6B 96
SOT-89-5
High Speed 0.8 ~ 1.5V 500mA SOT-25
XC6210 1.5 ~ 6.0V ±2.0% 35μA 50mV Ceramic USP-6B 97
Large Current 1.6 ~ 5.0V 700mA SOT-89-5
SSOT-24
SOT-25
XC6213 High Speed 2.0 ~ 6.0V 1.2 ~ 5.0V ±2.0% 150mA 35μA 400mV Ceramic USP-4 98
USPN-4
Large Current 1.8 ~ 6.0V 1.2, 1.5, 1.8, 500mA 8μA 100mV Ceramic SOT-89
99
XC6214 ±2.0% TO-252
2.5, 3.0, 3.3V
USP-4
Low Power SSOT-24
XC6215 1.5 ~ 6.0V 0.9 ~ 5.0V ±2.0% 200mA 0.8μA 320mV Ceramic USP-3 100
CE Pin SOT-25
USPN-4
SOT-25
28V Input SOT-89-5
2.0 ~ 12.0V USP-6C
XC6216 Low Power 2.0 ~ 28.0V ±2.0%(1.0%) 150mA 5μA 1500mV Ceramic 101
ADJ SOT-223
Consumption TO-252
SOT-89
USP-4D
XC6217 High Speed 1.6 ~ 6.0V 0.8 ~ 4.0V ±2.0% 200mA 4.5μA 80mV Ceramic SOT-25
102
“GreenOperation” SSOT-24
USPN-4
Positive Voltage
USP-3
XC6218 Low Power 1.5 ~ 6.0V 0.9 ~ 4.0V ±2.0% 200mA 1μA 200mV Ceramic SSOT-24 103
Consumption
SOT-25
USP-6B
XC6219 High Speed 2.0 ~ 6.0V 0.9 ~ 5.0V ±2.0%(1.0%) 300mA 25μA 200mV Ceramic SOT-89-5 104
SOP-8FD
USP-6C
SOT-25
XC6220 1A LDO 1.6 ~ 6.0V 0.8 ~ 5.0V ±1.0% 1000mA 8μA 20mV Ceramic SOT-89-5 105
SOP-8FD
USPN-4
USP-4
XC6221 High Speed 1.6 ~ 6.0V 0.8 ~ 5.0V ±2.0%(1.0%) 200mA 25μA 80mV Ceramic SOT-25 106
SSOT-24
USP-6C
XC6222 High Speed 1.7 ~ 6.0V 0.8 ~ 5.0V ±1.0% 700mA 100μA 40mV Ceramic SOT-25 107
SOT-89-5
USPQ-4B03
SSOT-24
XC6223 High Speed 1.6 ~ 5.5V 1.0 ~ 4.0V ±1.0% 300mA 100μA 70mV Ceramic SOT-25 108
SOT-89-5
USP-4
Low Power USPN-4B02
XC6224 High Speed 1.2 ~ 3.6V 0.8 ~ 3.0V ±1.5% 150mA 33μA 210mV Ceramic SOT-25 109
USP-4
XC6225 High Speed 2.5 ~ 6.0V 0.8 ~ 5.0V ±2.0% 30mA 25μA 70mV Ceramic SOT-25 110
SSOT-24
High Speed USP-6C
XC6227 Reverse Current 1.7 ~ 6.0V 0.8 ~ 5.0V ±1.0% 700mA 100μA 40mV Ceramic SOT-25 111
Protection SOT-89-5
Ultra Small
XC6229 Inrush Current 1.6 ~ 5.5V 1.2 ~ 4.0V ±1.0% 300mA 100μA 60mV Ceramic LGA-4B01 112
Protection
More than
XC6231 High speed 2.0~10.0V 0.9~5.5V ±2.0% 35μA 200mV Ceramic SOT-89-5 113
500mA
High Speed USPQ-4B04
USP-4
XC6233 Inrush Current 1.7 ~ 5.5V 1.2 ~ 3.6V ±1.0% 200mA 45μA 140mV Ceramic SSOT-24 114
Protection SOT-25
USP-3
USP-4
XC6501 CL Capacitor-Less 1.4 ~ 6.0V 1.2 ~ 5.0V ±1.0% 200mA 13μA 150mV - USPN-4 115
SSOT-24
SOT-25
USP-4
XC6503 CL Capacitor-Less 1.7 ~ 6.0V 1.2 ~ 5.0V ±1.0% 500mA 15μA 60mV - SOT-25
116
High Speed SOT-89-5
SOT-89
High Accuracy / USPQ-4B04
340mV Ceramic / USPN-4B02
XC6504 Low Quiescent 1.4 ~ 6.0V 1.1 ~ 5.0V ±1.0% 150mA 0.6μA 117
(VOUT=3.0V) CL Capacitor-Less SSOT-24
Current SOT-25
10.5V Operation USP-6C
XC6505 1.7 ~ 10.5V 1.5 ~ 8.0V ±1.0% 200mA 5.5μA 190mV - SOT-25 118
High Speed SOT-89-5
Selection Guide-7
________________________________________________________________________________________________________________ ●
Selection Guide
INPUT OUTPUT MAX. QUIESCENT DROPOUT OUTPUT
SERIES TYPE ACCURACY OUTPUT VOLTAGE PACKAGE PAGE
VOLTAGE VOLTAGE CURRENT CAPACITOR
CURRENT @100mA
N Channel Driver USP-6C
XC6601 1.0 ~ 3.0V 0.7 ~ 1.8V ±20mV 400mA 25μA 38mV Ceramic SOT-25 119
Low Voltage SOT-89-5
±15mV USP-6C
N Channel Driver VOUT<1.2V SOT-26W
XC6602 0.5 ~ 3.0V 0.5 ~ 1.8V 1A 100μA 15mV Ceramic 120
Low Voltage 1A ±20mV SOT-89-5
VOUT≧1.2V WLP-5-02
Low Input Voltage
(Adjustable
XC6603 Soft-start time with ±0.015V USP-6C
0.5 ~ 3.0V 0.5 ~ 1.8V 1A 100μA 15mV Ceramic 121
an external ±0.020V SOT-26W
component)
Low Input Voltage
(Adjustable
XC6604 Current Limit ±0.015V USP-6C
0.5 ~ 3.0V 0.5 ~ 1.8V 1A 100μA 15mV Ceramic 122
with an external ±0.020V SOT-26W
component)
SOT-25
SOT-89
28V Operation SOT-89-5
XC6701 2V ~ 28.0V 1.8V ~ 18.0V ±2.0% 150mA 50μA 1300mV Ceramic 123
High Speed USP-6C
SOT-223
TO-252
SOT-23
SOT-89
XC62KN Negative Voltage -2.1V ~ -10.0V -2.1 ~ -6.0V ±2.0%(1.0%) 100mA 3μA 380mV TO-92 124
USP-6B
SOT-25
XC6901 Negative Voltage -2.4 ~ -12.4V -0.9 ~ -12.0V ±1.5% 200mA 100μA 500mV Ceramic SOT-89-5 125
USP-6C
SOT-23
XC6902 Negative Voltage -2.4 ~ -16.0V -0.9 ~ -12.0V ±1.5% 200mA 100μA 500mV Ceramic SOT-89 126
USP-6C
Load Switch
MAX. OUTPUT QUIESCENT CURRENT
SERIES TYPE INPUT VOLTAGE ON RESISTANCE PACKAGE PAGE
CURRENT Iq (TYP.) CE OFF
USP-4
XC8101 CL Discharge 1.8~6.0V 200mA 3μA 0.1μA 0.75V@VIN=2.9V SOT-25 139
SSOT-24
USPN-4
XC8102 Low On-Resistance USP-4
CL Discharge 1.2 ~ 6.0V 400mA 3μA 0.1μA 0.28V@VIN=6.0V SOT-25 140
SSOT-24
Low ON Resistance SOT-25
XC8107 2.5 ~ 5.5V 2A 40μA 0.1μA 85mΩ 141
Fixed Current Limit USP-6C
XC8108 With Current Limit Adjustable Pin 2.5 ~ 5.5V 2A 40μA 0.1μA 85mΩ USP-6C 142
XC8109 With Current Limit Adjustable Pin 2.5~5.5V 0.9A 40μA 0.1μA 85mΩ
Current Limit: 0.075 A~1.3A(TYP.)
USP-6C 143
Selection Guide-8
__________________________________________________________________________________
Selection Guide
Selection Guide
Charge Pumps
SERIES TYPE EFFICIENCY OPERATING OUTPUT QUIESCENT OSCILLATION OUTPUT CURRENT PACKAGE PAGE
VOLTAGE VOLTAGE CURRENT FREQUENCY
310μA 120kHz SOT-26
XC6351A Inverter 90% 1.2 ~ 5.0V -1.2 ~ 5.0V 10mA 144
100μA 35kHz USP-6B
XC9801 Step-up MSOP-8A
69% 1.8 ~ 5.5V 2.5 ~ 6.0V 80μA 300kHz 80mA (VIN=3.6V, VOUT=5.0V) 145
XC9802 Doubler USP-8
Battery Charge IC
OPERATING CHARGE
VOLTAGE RANGE QUIESCENT
SERIES TYPE TERMINATION CHARGE CURRENT PACKAGE PAGE
CURRENT
TYP. MAX. VOLTAGE
SOT-89-5
Li-ion/Li-Polymer
XC6801 4.25V 6.0V 4.2V±0.7% 500mA 12μA SOT-25 146
1Cell
USP-6C
SOT-89-5
Li-ion/Li-Polymer SOT-25
XC6802 4.25V 6.0V 4.2V±0.7% 800mA 15μA 147
1Cell USP-6C
USP-6EL
Li-ion/Li-Polymer
XC6803 4.5~6.0V JEITA Standard 4.2V±30mV 40~280mA 100μA USP-6EL 148
1Cell
Li-ion/Li-Polymer SOP-8FD
XC6804 4.5~6.0V JEITA Standard 4.2V±30mV 200~800mA 100μA 149
1Cell USP-6EL
Li-ion/Li-Polymer
XC6805 4.5~6.0V JEITA Standard 4.2V±30mV 5~40mA 100μA USP-6EL 150
1Cell
Temperature Sensors
TEMPERATURE DETECTABLE INPUT OUTPUT QUIESCENT
SERIES TYPE ACCURACY PACKAGE PAGE
COEFFICIENTS TEMPERATURE RANGE VOLTAGE VOLTAGE CURRENT
USPN-4
XC3101 Analog Output -11.77mV/℃ -40℃ ~ +100℃ 2.7 ~ 5.5V 1.6V@25℃ ±3.5℃ 3.5μA 155
SSOT-24
Oscillator IC
OSCILLATION OPERATING
SERIES TYPE QUIESCENT CURRENT PACKAGE PAGE
FREQUENCY VOLTAGE RANGE
3.3V(±10.0%)
XC2163 Overtone crystal oscillator 20M ~ 125MHz 15mA(fOSC=120MHz) SOT-26 157
5.0V(±10.0%)
Fundamental crystal oscillator 4M ~ 30MHz 3.3V(±10.0%) 5mA(fOSC =30MHz)
XC2164 SOT-26 158
Overtone crystal oscillator 20M ~ 125MHz 5.0V(±10.0%) 10.5mA(fOSC=125MHz)
XC2301 Tri-State Buffer IC 160MHz 3.3V±10.0% 13mA(fIN=fOUT=160MHz) SOT-26 159
∗ Values are shown in the chart can be changed without any prior notice.
For information about the mass production schedule or for product details, please contact your local Torex sales office or representative.
Selection Guide-9
Selection Guide
* High Speed Type: PSRR≧60dB@1kHz、Middle Speed Type: PSRR≧40dB@1kHz、Low Quiescent Current
Voltage Regulators Type: IQ≦10μA
* Under development
CMOS XC6602
0.5V Input 1000mA Low Input Voltage 120
Single
XC6603 121
XC6604 122
3V Input 400mA High Speed XC6601 119
3.6V Input 150mA High Speed XC6224 109
5.5V Input 200mA High Speed XC6233 114
300mA High Speed XC6223 108
XC6229 112
XC6236* Under development-5
Selection Guide-10
FET Built-in 45
(Synchronous) 5.5V Input 1000mA XC9257
XC9258 45
XC9259 46
1500mA XC9260 47
XC9261 47
XC9262 48
6000mA XC9266 Under development-2
2200mA XC9248 43
FET Built-in 16V Input 1000mA XC9246 42
(External SD)
XC9247 42
3000mA XCM526 154
FET Built-in XC9270 50
(Non-synchronous) 30V Input 2000mA
XC9271 50
External FET 25V Input XC9213 36
(Synchronous)
External FET *
Step-Up&Down (Synchronous Step-down) 10V Input [800mA (4.2V→3.3V)] XC9303 63
External FET *
10V Input [250mA (2.4V→3.3V)] XC9301 62
(Non-synchronous)
XC9302 62
FET Built-in [1200mA (4.2V→3.3V)] 64
(Synchronous) 5.5V Input XC9306
[800mA (2.5V→3.3V)]
Selection Guide-11
Charge Pump *
(Inductor less) 5.5V Input 80mA (3.6V→5V) XC9801 145
XC9802 145
FET Built-in *
(Synchronous) 5.5V Input 100mA (1.8V→3.3V) XC9140 61
*
500mA (1.8V→3.3V) XC9131 59
XC9135 60
XC9136 60
6V Input 350mA (1.8V→3.3V) XC9141/42* Under development-3
*
500mA (1.8V→3.3V) XC9128 58
XC9129 58
FET Built-in *
(External SD) 6V Input 10mA (3.6V→15V) XC9119 56
*
10V Input 100mA (3.3V→5V) XC9110 55
XC9111 55
XC6371 52
XC6372 52
External FET 6V Input XC9120 57
(Non-synchronous)
XC9121 57
XC9122 57
10V Input XC6367 51
XC6368 51
XC9103 53
XC9104 53
XC9105 53
Step-Up External FET
(Variable Output Voltage) (Non-synchronous) 10V Input [30mA (3.3V→20V)] XC9106 54
XC9107 54
External FET *
Step-Up (Dual) (Non-synchronous) 10V Input [200mA (1.8V→3.3V)] XC9501 65
[300mA (3.3V→9V)]
Step-Up(+Positive and External FET [20mA (3.3V→12V)]
Negative Charge Pump) (Non-synchronous) 5.5V Input XC9516 71
[20mA (3.3V→-5V)]
Voltage Detectors
Built-in Delay Circuit High Accuracy detection, High Accuracy Temperature Characteristics XC6127 81
Standard Delay Function XC61F/H 74
High Accuracy detection, Manual Reset Function, Selectable Detect Logic XC6129 82
Selection Guide-12
LGA-6A01 XC6423
(1.2×1.2)
USP-6B04 XC6420
(1.2×1.2)
USP-12B01 XCM406
(2.3×2.8)
Selection Guide-13
USPN-4B02
XC6504
(0.75 x 0.95)
USPQ-4B03
XC6223
(1.0×1.0)
USPQ-4B04
XC6504 XC6233
(1.0×1.0)
USPN-4 XC6215
(0.9×1.2) XC6501
WLP-5-02
XC6602
(0.88 x 1.25)
USP-3 XC6215P
(1.2×1.2) XC6501
XC6215
USP-4
XC6233 XC6503
(1.2×1.6)
XC6501
SOT-553*
XC6236*
(1.5×1.5)
XC6901 XC6602 XC6220
USP-6B/USP-6C XC6216B XC6204 XC6222
XC6505 XC6601 XC6603 XC6230*
(1.8×2.0) XC6701B XC6702* XC6227
XC6703* XC6604
XC6215 XC6233
SSOT-24
XC6224 XC6221 XC6501 XC6223
(2.0×2.1)
XC6217
XC6216B XC6215 XC6505
SOT-25 XC6221 XC6901 XC6204 XC6222
XC6224 XC6217 XC6233 XC6601 XC6503 XC6220
(2.8×2.9) XC6223 XC6227
XC6701B XC6501
XC6602
SOT-26W
XC6603
(2.8×2.9)
XC6604
XC6204
SOT-89-5 XC6216B XC6505 XC6503D XC6222 XC6220
XC6223 XC6601
(4.35×4.5) XC6701B XC6901 XC6231 XC6227 XC6602
XC6702*
SOP-8FD
XC6703* XC6702* XC6230*
(4.9 x 6.0)
* Under Development
Selection Guide-14
3-Terminal Regulators
Flow of Product Development
Output Current Previous Generation Current Generation Newest Model Features
(XC6202) XC6216D 28V Input, Low Power Supply, 5μA,
(20V Input, No Thermal XC6701D Thermal Shutdown
150mA
Shutdown) 28V Input, Middle High Speed, Thermal
Shutdown
XC6215P 6V Input, Low Power Supply 0.8μA
XC6218 6V Input, Low Power Supply 1μA
200mA XC62FJ 10V Input
XC6501P 6V Input, Capacitor Less
XC6902 -16V Input, Negative Voltage
XC6206 6V Input, Input, Low Power Supply 1μA
250mA
XC6201 10V Input
(XC6203)
400mA
(No Thermal Shutdown)
XC6214 XC6231 10V Input, High Speed
500mA XC6503P 6V Input, Input, Middle High Speed,
Thermal Shutdown
1000mA XB1117 Thermal Shutdown
1500mA XB1086 Thermal Shutdown
3000mA XB1085 Thermal Shutdown
USP-3 XC6215P
XC6218
(1.2×1.2)
XC6501P
USP-6C XC6902
(1.8×2.0)
SSOT-24 XC6218
(2.0×2.1)
SOT-23 XC6206
(2.8×2.9) XC6902
SOT-25 XC6201
(2.8×2.9)
XC6206
SOT-89 XC6216D XC6902 XC6201 XC6214
(4.0×4.5) XC6701D XC6503P
XC62FJ
SOT-89-5 XC6231
(4.35 x 4.5)
High Voltage
Regulator 28V CMOS Low Power Supply LDO Bipolar High Speed
Input
Selection Guide-15
LGA-8B01*
(1.2 x 1.4) XC9259 XC9262
USPN-6 XC9244
(1.3×1.3) XC9245
CL-2025/
CL-2025-02 XCL201 XCL205 XCL219
(2.0×2.5) XCL202 XCL206 XCL220
USP-10B03 XCL208
(2.15×2.5) XCL209
USP-10B XC9242
(2.6×2.9) XC9243
USP-12B01
(2.3×2.8) XCM526
USP-9B01 XCL213
(2.5×3.2) XCL214
SOT-26W XC9246
(2.8×2.9) XC9247
MSOP-10 XC9242
(3.0×4.9) XC9243
USP-11B01 XCL211
(3.1×4.7) XCL212
SOT-89-5 XC9260
(4.35 x 4.5) XC9261
SOP-8FD XC9270
(6.0 x 4.9) XC9271 XC9248
QFN-24 XC9266*
(4.0 x 4.0)
* Under Development
Selection Guide-16
TVS Diodes
Comparison of Characteristics
Product number XBP1012-G XBP1009-G XBP1010-G XBP1011-G XBP1013-G XBP1007-G
Type Bidirectional (Single) Unidirectional (Single)
VBR MIN. (@IR=1mA) 13.3V 6.0V 6.2V 6.0V 6.0V 27.27V
IR MAX. 1.0㱘A 1.0㱘A 1.0㱘A 5.0㱘A 10㱘A 1.0㱘A
Ct (@VR=0V,f=1MHz) 100䌰F(MAX.) 0.35pF(MAX.) 35pF(MAX.) 110pF(MAX.) 300pF(MAX.) 3.0pF(MAX.)
ESD Protection 8kV 25kV 8kV 25kV 25kV 8kV
Package SOD-323P DFN2L SOD-923 SOD-523P SOD-323P SOD-323P
Dimensions (mm) 2.5x1.25(h=0.95) 1.0x0.6(h=0.55) 1.0x0.6(h=0.45) 1.6x0.8(h=0.65) 2.5x1.25(h=0.95) 2.5x1.25(h=0.95)
Pin Configuration
Pin Configuration
㪊 㪊 㪈 㪋
㪈 㪉 㪊
Pin Configuration
㪈 㪉 㪊
Application Circuits
㪯㪙㪧㪈㪇㪇㪋㪄㪞 㪯㪙㪧㪈㪇㪇㪈㪄㪞
㪯㪙㪧㪈㪇㪇㪋㪄㪞 㪯㪙㪧㪈㪇㪇㪈㪄㪞
Selection Guide-17
XC9263/XC9264 Series
0. Under Development
18V Operation 0.5A Synchronous Step-Down DC/DC Converters
Preliminary
General Description Features
The XC9263/XC9264 series are 18V operation synchronous step-down DC/DC Input Voltage Range: 3V~18V
converter ICs with a built-in P-channel MOS driver transistor and N-channel (Absolute Maximun Rating: 20.0V)
MOS switching transistor. The XC9263/XC9264 series has operating voltage FB Voltage: 0.75V (±1.5%)
range of 3.0V~18.0V and high-efficiency power supply up to an output current
Oscillation Frequency: 500kHz, 1.2MHz, 2.4MHz
of 0.5A. Low ESR capacitors such as ceramic capacitors can be used for the
load capacitor (CL). Output Current: 0.5A
A 0.75V reference voltage source is incorporated in the IC, and the output Control Methods: PWM/PFM Auto
voltage can be set to a value from 1.0V to 15.0V using external resistors (RFB1, Efficiency 85%@12V→5V, 1mA (TBD)
RFB2). PWM control
500kHz or 1.2MHz or 2.4MHz can be selected for the switching frequency. In Soft-start Time: Adjustable by RC
automatic PWM/PFM control, the IC operates by PFM control when the load is Protection Circuits: Over Current Protection
light to achieve high efficiency over the full load range from light to heavy. Automatic Recovery
The soft-start time is internally set to 0.9ms (TYP.), but can be adjusted to set a
Integral Latch Method
longer time using an external resistor and capacitor.
With the built-in UVLO function, the driver transistor is forced OFF when input Thermal Shutdown
voltage becomes 2.7V or lower. Low ESR Ceramic Capacitor: Ceramic Capacitor
The output state can be monitored using the power good function. Packages: SOT-25 (without Power Good function)
Internal protection circuits include over current protection, short-circuit protec- USP-6C
tion, and thermal shutdown circuits to enable safe use. Environmentary Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
70
60
50
40
30
20
10
0
0.01 0.1 1 10 100 1000
Ordering Information
XC9263①②③④⑤⑥-⑦(*1) PWM control
XC9264①②③④⑤⑥-⑦(*1) PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to Selection Guide
B
②③ Adjustable Output Voltage 75 Output voltage can be adjusted in 1V to 15V
5 500kHz
④ Oscillation Frequency C 1.2MHz
D 2.4MHz
(*1)
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit) (*1)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
Current Automatic Recovery Latch Protection Current Automatic Recovery Latch Protection
TYPE Package Chip Enable TYPE Package Chip Enable
Limitter (Current Limitter) (Current Limitter) Limitter (Current Limitter) (Current Limitter)
A YES NO YES (*1) YES A YES NO YES (*1) YES
MR-G ER-G
B YES YES NO YES B YES YES NO YES
Thermal Thermal
TYPE Package UVLO Soft Start Power Good TYPE Package UVLO Soft Start Power Good
Shutdown Shutdown
A YES YES YES NO A YES YES YES YES
MR-G ER-G
B YES YES YES NO B YES YES YES YES
(*1)
The over-current protection latch is an integral latch type.
Under development-1
0. Under Development (Step-Down DC/DC Converters) _____________________________ ●
*GreenOperation-compatible
XC9266 Series
0. Under Development
Preliminary
General Description Features
The XC9266 series is a group of synchronous-rectification type DC/DC con- Input Voltage Range: 2.7V~5.5V
verters with a built-in P-channel MOS driver transistor and N-channel MOS (Absolute Maximum Rating: 6.2V)
switching transistor, designed to allow the use of ceramic capacitors. The small Output Voltage Setting: 0.8V~3.6V
on-resistances of these two internal driver transistors enable a high efficiency, Oscillation Frequency: 1.2MHz,3MHz
stable power supply with an output current up to 6.0A. A 0.6V reference voltage High Efficiency: 93% (VIN=5.0V,VOUT=1.8V, IOUT=1.0A)
source is incorporated, and the output voltage can be set freely by external re- Output Current: 6.0A
sistors. Oscillation frequency is set to 1.2MHz or 3.0MHz can be selected for Control Methods: HiSAT-COT control
suiting to your particular application. The operation mode is HiSAT-COT(*) con- Mode select between
trol, which has an excellent transient response. PWM control or PWM/PFM Fixed PWM and PFM/PWM auto
auto switching control can be selected at the MODE1 pin, and a high-speed Maximum Duty Cycle: 100%
response, low ripple, and high efficiency are achieved across the entire load Functions: Soft-Start Adjustable
range (from light loads to heavy loads). During stand-by, all circuits are shut- CL Discharge (with Soft-off function)
down to reduce current consumption to as low as 1.0μA or less. As for the Current limiter
soft-start function as fast as 0.25ms in typical for quick turn-on. The soft start Hiccup mode or Integral Latching
time can be set as desired by adding an external capacitance to the SS pin. Short-circuit protection
Internal protection circuits include over current protection, short-circuit protec- Thermal Shutdown
tion, and thermal shutdown circuits to enable safe use. Short circuit protection UVLO
or Hiccup mode can be selected at the MODE2 pin. Soft-off function can be Capacitor: Ceramic Capacitor
selected at the MODE3 pin. The package is the QFN-24(4X4). Operating Ambient Temperature: -40℃~+105℃
(*)
HiSAT-COT is an original Torex term for High Speed Transient Response. Package: QFN-24(4x4)
Environmentally Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
MODE3
RFB1
40
FB PWM
CSS
20
SS
CDD RFB2 0
AGND PGND
1 10 100 1000 10000
Output Current : IOUT (mA)
Ordering Information
XC9266①②③④⑤⑥-⑦ PWM control
DESIGNATOR ITEM SYMBOL DESCRIPTION
Output Voltage (Adjustable)
CL Auto-Discharge with Soft-off
Short Protection with Latch
Hiccup Mode
① Type B
UVLO
Current Limit
Soft-start (Fixed)
Thermal Shutdown
②③ Adjustable Output Voltage 06 Output voltage can be adjusted in 0.8V to 3.6V
C 1.2MHz
④ Oscillation Frequency
D 3.0MHz
⑤⑥-⑦(*1) Package (Order Unit) ZR-G QFN24 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
Under development-2
● ____________________________________ 0. Under Development (Step-Up DC/DC Converters)
*GreenOperation-compatible
XC9141/XC9142 Series
0. Under Development
Load Disconnection Function, 0.8A Step-up DC/DC Converters
Preliminary
General Description Features
XC9141/XC9142 series are synchronous step-up DC/DC converters Input Voltage Range: 0.65V~6.0V
with a 0.3Ω(TYP.) N-channel driver transistor and a 0.4Ω(TYP.) syn- (Absolute Maximum Rating: 7.0V)
chronous P-channel switching transistor built-in. A highly efficient Fixed Output Voltages: 1.8V~5.5V (0.1V increments)
Oscillation Frequency: 1.2MHz,3MHz (±15%)
and stable current can be supplied up to 0.8A by reducing ON re-
Input Current: 0.8A
sistance of the built-in transistors. Output Current: 450mA @VOUT=5.0V, VIN=3.3V (TYP.)
The series are able to start operation under the condition which has 350mA @VOUT=3.3V, VIN=1.8V (TYP.)
0.9V input voltage to generate 3.3V output voltage with a 100Ωload Control Mode Selection: PWM (XC9141 Series) or
resistor, suitable for mobile equipment using only one Alkaline battery Auto PWM/PFM (XC9142 Series)
or one Nickel metal hydride battery. Load Transient Response: 100mV
The output voltage can be set from 1.8V to 5.5V (±2.0%) in steps of @VOUT=3.3V,VIN=1.8V,VOUT=1mA→200mA
0.1V.With the built-in oscillator, either 1.2MHz or 3.0MHz can be se- Protection Circuits: Over-current limit , Integral latch method Output
short protection
lected for suiting to your particular application.
Functions: Soft-start
During the devices enter stand-by mode, A type prevent the applica- Load Disconnection Function (Type A,C)
tion malfunction by CL Discharge Function which can quickly dis- CL Auto Discharge Function (Type A)
charge the electric charge at the output capacitor (CL). B type is able Bypass Switch Function (Type B)
to drive RTC etc. by Bypass Switch Function to maintain continuity Output Capacitor: Ceramic Capacitor
between the input and output. C type is able to connect in parallel Operating Ambient Temperature: -40℃~+105℃
with other power supplies by Load Disconnection Function which Packages: SOT-25, USP-6C
breaks continuity between the input and output. Environmentally Friendly: EU RoHS Compliant, Pb Free
1 2 3 70
CE GND BAT 60 VIN=1.2V 1.8V 2.4V
SOT-25 USP-6C 50
(TOP VIEW) (BOTTOM VIEW)
40
30
Typical Application Circuit T 20
L=4.7μH 10 4D)
VOUT
Lx VOUT 0
0.1 1 10 100 1000
CE CL=10μF
CE Output Current : IOUT (mA)
VIN
BAT GND
CIN =10μF
Ordering Information
XC9141①②③④⑤⑥-⑦ PWM control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to Selection Guide
B
②③ Output Voltage 1.8~5.5 Output voltage options e.g. 1.2V → ②=1, ③=2
C 1.2MHz
④ Oscillation Frequency
D 3MHz
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
XC9142①②③④⑤⑥-⑦ PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type B Refer to Selection Guide
C
②③ Output Voltage 1.8~5.5 Output voltage options e.g. 1.2V → ②=1, ③=2
C 1.2MHz
④ Oscillation Frequency
D 3MHz
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE Output Voltage CL Auto-Discharge Bypass Switch Load Disconnection
A Fixed Yes No Yes
B Fixed No Yes No
C(*1) Fixed No No Yes
(*1)
Type C is available for the XC9142 series only.
TYPE Chip Enable Current Limit (Integral latch) Soft-Start Short Protection (Latch)
A Yes Yes Fixed Yes
B Yes Yes Fixed Yes
C(*1) Yes Yes Fixed Yes
(*1)
Type C is available for the XC9142 series only.
Under development-3
0. Under Development (Voltage Regulators) _______________________________________________
XC6230 Series
0. Under Development
Very Low ON Resistance 2A High Speed LDO with Reverse Current Protection
Preliminary
General Description Features
The XC6230 series is very low on-resistance, high precision, low Maximum Output Current: 2A
noise, high PSRR, and large current High Speed LDO. Current Limit Setting Range: 0.3A (TBD)~2.6A
Internal circuitry includes a reference voltage supply, error amplifier, Dropout Voltage: 0.17V(TBD)@IOUT=1.0A/VOUT(T)=3.3V
driver transistor, over-current protection circuit, in-rush current pre- Input Voltage Range: 1.7V~6.0V
vention circuit, reverse current protection circuit, thermal shutdown
(Absolute Maximum Rating: 7.0V)
circuit, and phase compensation circuit.
0.18Ω low on-resistance PMOS driver transistor is integrated, the VOFB Accuracy: 1.2V (±1.0%)
very low dropout voltage performance with output currents up to Output Voltage Setting Range: 1.2V~5.0V
2.0A. Quiescent Current: 45μA (TBD)
A low ESR ceramic capacitor can be used for the output stabilization Functions: Reverse Current Protection (Option)
capacitor (CL). Inrush Current Prevention
The over current protection circuit will operate when the output cur- Output Voltage Adjustable
rent reaches its limit current. The thermal shutdown circuit will oper- CL High Speed Discharge
ate when the junction temperature reaches its limit temperature. Current Limit Adjustable
The inrush current prevention circuit works by controlling the inrush Protection Functions: Thermal Shutdown
current which charges to CL when the IC starts up. In this way, volt- (Detect: 150°C, Release: 125°C (TYP.))
age fluctuations in power supply caused by inrush current during Current Limit
system start up can be minimized. The reverse current protection
Short Protection
function of a driver transistor, the reverse current flow is prohibited
when VOUT voltage is higher than VIN voltage. Output Capacitor: Ceramic Capacitor (4.7μF)
The CE function enables the output to be turned off and the IC be- Operating Ambient Temperature: -40°C~+105°C
comes a stand-by mode resulting in greatly reduced quiescent cur- Packages: SOP-8FD, USP-6C
rent. Environment Friendly: EU RoHS Compliant, Pb Free
There are the adjustable functions of both current limit and output
voltage which can change current limit value by adding one external
resistor and change output voltage by two external resistors.
Pin Configuration
0.8
VOUT(V)
RLIM=0Ω
0.6
RLIM=36kΩ
0.4
RLIM=180kΩ
0.2
0
0 0.5 1 1.5 2 2.5 3
IOUT(A)
Ordering Information
XC6230①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
CE Pull-down Resistor
① Type D
CL Auto Discharge
②③ Output Voltage 00 Output Voltage (Adjustable)
④ Protection Circuit C Current Limit (Adjustable)
QR-G SOP-8FD (1,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
Under development-4
________________________________________________________________________________________________________________ ●
XC6236 Series
0. Under Development
300mA Ultra Small, High Speed LDO with Built-in Inrush Current Protection
Preliminary
General Description Features
The XC6236 series are high-speed LDO regulators that achieve high Maximum Output Current: 300mA
accuracy, low noise, high ripple rejection, low dropout, and a low Dropout Voltage: 200mV@IOUT=300mA (VOUT=3.0V)
quiescent current. The IC consists of a reference voltage source, Input Voltage Range: 1.6~5.5V
error amplifier, driver transistor, current limiting circuit, phase com- (Absolute Maximum Rating: 7.0V)
pensation circuit, thermal shutdown circuit, and rush current preven-
Output Voltage: XC6236G Series 1.35V
tion circuit.
When L level is input into the CE pin, the IC enters the standby state. XC6236H Series 1.35V, 3.0V
In the standby state, the charge on the output stabilization capacitor Quiescent Current: 100μA
(CL) can be discharged using the internal switch between the VOUT pin Stand-by Current: 0.1μA
and VSS pin. This function makes it possible to quickly return the VOUT High Ripple Rejection: 80dB@f=1kHz
pin to the VSS level. Protection Circuit: Current Limit (400mA)
A low ESR capacitor such as a ceramic capacitor can be used for the Short Protection
output stabilization capacitor (CL) Thermal Shutdown
The output voltage is set internally by laser trimming. Inrush Current Protection
The IC has an internal over-current protection circuit and thermal
Output Capacitor: Low ESR Capacitor (CIN=1μF, CL=1μF)
shutdown circuit, and the respective protection circuit activates when
the output current reaches the limit current or the junction tempera- CE Pin: Active High, CL High Speed Discharge
ture reaches the limit temperature Operating Ambient Temperature: -40°C~+85°C
Package: SOT-553
Environment Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
(TOP VIEW)
Ordering Information
XC6236①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Current Limit
CE Pull-down Resistor
① Type H CL Discharge
Thermal Shutdown
Inrush Current Protection
13B 1.35V
②③④ Output Voltage
301 3.0V
(*1)
⑤⑥-⑦ Package (Order Unit) 6R-G SOT-553 (4,000 /Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
Under development-5
0. Under Development (Voltage Regulators) _______________________________________________
XC6702 Series
0. Under Development
36V Input 300mA Low Quiescent Current High Speed LDO Regulator
Preliminary
General Description Features
The XC6702 series are low quiescent current, high speed voltage Input Voltage: 4.5V~36.0V
regulator ICs manufactured using CMOS process with 36V of input (Absolute Maximum Rating 42.0V)
voltage. Peak Voltage: 46.0V, 400ms
The series consists of a voltage reference, an error amplifier, a cur- Output Current: 300mA
rent limiter, a thermal protection circuit, a soft-start circuit and a Output Voltage Range: 1.8V~18.0V (±1.0%)
phase compensation circuit plus a driver transistor.
The output voltage is selectable within the range of 1.8V to 18.0V Low Quiescent Current: 40μA
which fixed by laser trimming technologies. Dropout Voltage: 350mV@IOUT=100mA (VOUT=5.0V)
The over current protection circuit and the thermal shutdown circuit High Ripple Rejection: 65dB@1kHz
are built-in. These two protection circuits will operate when the Stand-by Current: 0.1μA
output current reaches current limit level or the junction temperature Protection Circuit: Current Limit
reaches temperature limit level. Thermal Shutdown
The soft-start circuit reduces inrush current, and stable turn-on se- Soft-start
quence can be achieved when the IC turned on. Function: ON/OFF (Active High)
The CE function enables the output to be turned off and resulting in Output Capacitor: Ceramic Capacitor Compatible
reduced quiescent current less than 0.1μA. Operating Ambient Temperature: -40℃~+105℃
In stand-by mode, the series enables the electric charge at the output Packages: USP-6C, SOT-89-5, SOP-8FD
capacitor (CL) to be discharged via the internal switch. As a result the Environmental Friendly: EU RoHS Compliant, Pb Free
VOUT pin quickly returns to the VSS level.
The output stabilization capacitor (CL) is also compatible with low
ESR ceramic capacitors.
Pin Configuration
NC
CE
5.1
Output Voltage
5.0 90
4.9
4.8 60
4.7
Output Current
4.6 30
4.5
4.4 0
Time (200μs/div)
Ordering Information
XC6702①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Current Limiter
Thermal Shutdown
① Type D
Soft-start
ON/OFF Control
For the voltage within 1.8V~9.5V:
e.g. 3.3V → ②=3, ③=3
5.0V → ②=5, ③=0
②③ Output Voltage (*2) 18~J0 (*3) For the voltage within 10.0V~18.0V:
e.g. 10.0V → ②=A, ③=0
12.5V → ②=C, ③=5
18.0V → ②=J, ③=0
④ Output Voltage Accuracy 1 ± 1.0%
ER-G USP-6C (3,000/Reel)
(*1)
⑤⑥-⑦ Packages (Order Unit) PR-G SOT-89-5 (1,000/Reel)
QR-G SOP-8FD (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
Output voltage setting steps are as follows:
VOUT < 6.0V (0.1V increments)
VOUT ≥ 6.0V (0.5V increments)
(*3)
For 10.0V to 18.0V, A to J excluding I are used in "②"
Under development-6
________________________________________________________________________________________________________________ ●
XC6703 Series
0. Under Development
60V Low Power Consumption, High-Speed Load Transient, 200mA Voltage Regulators
Preliminary
General Description Features
The XC6703 series are CMOS high-speed voltage regulator ICs with Maximum Output Current: 200mA
an input voltage range from 3.0V to 60.0V and a low power con- Input Voltage Range: 3.0V~60.0V (TBD)
sumption and a maximum output current of 200mA. Output Voltage Range: 2.0V~12.0V (0.1V increments)
The series consists of a reference voltage supply, an error amplifier, Dropout Voltage: 230mV@IOUT=100mA
a driver transistor, a current limit protection circuit, a thermal shut-
Low Quiescent Current: 6μA (TYP.), 9.8μA (MAX.)
down circuit, and a phase compensation circuit.
The output voltage is selectable in 0.1V increments within the range Accuracy: ±0.8% (VOUT≧2.5V)
of 2.0V to 12.0V. ±1.0% (VOUT<2.5V)
The CE function enables the circuit to be in stand-by mode by input- Temperature Characteristics: ±30ppm/℃ (TYP.)
ting low level signal. (except for three pin products.) Stand-by Current: 0.27μA
The built-in current limit protection circuit or thermal shutdown pro- (except for three pin products)
tection circuit operate when the output current reaches the current CE Pin Function: Active High (with pull down)
limit or the junction temperature reaches the temperature limit. CL High Speed Discharge
A low-ESR capacitor such as a ceramic capacitor can also be used Protection Circuits: Current Limit, Thermal Shutdown
for an output stabilization capacitor (CL).
Operating Ambient Temperature:-40℃~+125℃
Packages can be selected according to a circuit design from small
and highly dissipating packages like TO-252, TO-252-5, USP-6C and Output Capacitor: Ceramic Capacitor Compatible
SOP-8FD. (2.2μF)
Packages: TO-252, TO-252-5, SOP-8FD,
USP-6C
Environmentally Friendly: EU RoHS Compliant, Pb free
VIN VOUT
INPUT
CE CL
CIN VSS
1 2 3 1 2 3 4 5
CL
CIN VSS
Ordering Information
XC6703①②③④⑤⑥-⑦ XC6703①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION DESIGNATOR ITEM SYMBOL DESCRIPTION
A ① Type D Refer to Selection Guide
① Type Refer to Selection Guide For the voltage within 2.0V~9.9V
B
For the voltage within 2.0V~9.9V (0.1V Step) :
(0.1V Step) : e.g. 3.3V → ②=3, ③=3
e.g. 3.3V → ②=3, ③=3 5.0V → ②=5, ③=0
②③ Output Voltage 20~C0
5.0V → ②=5, ③=0 For the voltage within 10.0V~12.0V
②③ Output Voltage 20~C0 (0.1V Step) :
For the voltage within 10.0V~12.0V
(0.1V Step) : e.g. 10.0V → ②=A, ③=0
e.g. 10.0V → ②=A, ③=0 11.5V → ②=B, ③=5
11.5V → ②=B, ③=5 For the voltage within 2.5V~12.0V :
A
For the voltage within 2.5V~12.0V : Output Voltage ±0.8%
A ④
Output Voltage ±0.8% Accuracy For the voltage within 2.0V~ 2.4V :
④ 1
Accuracy For the voltage within 2.0V~ 2.4V : ±1.0%
1 Packages QR-G SOP-8FD (1,000/Reel)
±1.0% ⑤⑥-⑦ (*1)
●Selection Guide
OUTPUT CE PULL-DOWN CL AUTO-
TYPE CE
Voltage RESISTOR DISCHARGE
A Fixed Yes Yes Yes
B Fixed Yes Yes No
D Fixed No - -
Under development-7
0. Under Development (Multi Chip Module) _______________________________________________●
XCM413 Series 36V Input Voltage 300mA Low Quiescent Current High Speed LDO Regulator
0. Under Development
VOUT 1 8 VIN
VSS 2 7 CE
Cd 3 6 WD
RESETB 4 5 VSEN
(VD_VIN)
SOP-8FD
(TOP VIEW)
Ordering Information
XCM413①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
①② Type AA Standard
③④ Output Voltage, Detect Voltage 01 VOUT=5.0V, VDF=4.6V
⑤⑥-⑦(*1) Package (Order Unit) QR-G SOP-8FD (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
Under development-8
● __________________________________ 0. Under Development (TVS Diodes) (Rectifier Diode)
XBP3KSMC
0. Under Development
3000W Transient Voltage Suppressor (TVS)
Preliminary
General Description Pin Configuration
Bi-directional, One Line
Package: SMA-PG
Environmentally Friendly: EU RoHS Compliant
Applications
●Lighting
●Communication equipment
●Industrial equipment
Preliminary
Features Applications
Forward Current: IF(AV)=1.0A ●Power supply module
Repetitive Peak Reverse Voltage: VRM =200V~1000V ●AC Adapter
Environmentally Friendly: EU RoHS Compliant ●Home appliances
Electrical Characteristics
Ta=25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF IF=1A - - 1.1 V
Voltage
Reverse
IR VR=VDC - - 1.0 μA
Current
Terminal VR=4V,
Ct - 12 - pF
Capacitance f=1MHz
Under development-9
0. Under Development (Fast Recovery Diode) ____________________________________________●
Preliminary
Features Applications
Forward Current: IF(AV)=1.0A ●Power supply module
Repetitive Peak Reverse Voltage: VRM =200V~1000V ●AC Adapter
Environmentally Friendly: EU RoHS Compliant ●Home appliances
Electrical Characteristics
●XBFUS1D-G
Ta=25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF IF=1A - - 1.0 V
Voltage
Reverse
IR VR=VDC - - 1.0 μA
Current
Terminal VR=4V,
Ct - 17 - pF
Capacitance f=1MHz
IF=0.5A,
Reverse
trr IR=1.0A, - - 50 ns
Recovery Time
irr=0.25A
●XBFUS1J-G, XBFUS1M-G
Ta=25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF IF=1A - - 1.7 V
Voltage
Reverse
IR VR=VDC - - 1.0 μA
Current
Terminal VR=4V,
Ct - 17 - pF
Capacitance f=1MHz
IF= 0.5A,
Reverse
trr IR=1.0A, - - 100 ns
Recovery Time
irr=0.25A
Under development-10
● ______________________________________________________ 1. Off-line Controllers for LED Lighting
Ordering Information
XC9401①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A PFC Function Built-in (VSINE voltage external input)
① Type B LED constant current circuit
C LED constant current circuit
② OFF Time 6 OFF Time is fixed in 6μs
05 Type A, Type B: ISEN Voltage, Accuracy is ±5.0%
③④ Accuracy
0C Type C: ISEN Voltage, Accuracy is ±2.5%
(*1) Packages MR-G SOT-26 (3,000/Reel) (Type A and B Only)
⑤⑥-⑦
(Order Unit) SR-G SOT-25 (3,000/Reel) (Type C Only)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
1
1. Off-line Controllers for LED Lighting ______________________________________________________ ●
XC9404 Series Offline Controller for LED Lighting with Power Factor Correction
1. Off-line Controllers for LED Lighting
General Description
The XC9404 series are LED lighting offline controllers that use PFM (Pulse Frequency Modulation) control and have a Power Factor improvement
function. The operating input voltage range is 85VAC to 270VAC, and the current is controlled on the primary side without using a Opto-coupler or
secondary side control circuit. Because LED current fluctuations caused by input voltage fluctuations and LED voltage fluctuations can be sup-
pressed, a stable LED lighting power supply is obtained.
A high Power Factor and low THD are attained by synchronizing the input current with the input voltage, and operation in DCM(Discontinuous Cur-
rent Mode) makes it possible to achieve high efficiency. An internal acceleration startup circuit enables the LED lighting to illuminate quickly.
Over Voltage Protection, Over Current Protection, and UVLO are provided as protective functions to protect the LED lighting in the event of LED
Open/Short-circuiting.
Pri
LT1
C5 R7 D3
RVdd1
RL1 Sec
RVdd2 + LED
D2 C7
D1
R1
AUX
85~270VAC CX1 BR1 ZD1 C4 R5
C1
CY1
R6
IC
R4 VDD Rg
VINS ZVS Q1
R2 RL2
C3 GATE
Vsine ISEN
Rs
R3 C2
GND
L2
Ordering Information
XC9404①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Type A With PFC Function
② Application L For Off-line Driver for LED Lighting
③④ Accuracy 03 LED Current Accuracy is ±3.0%
Package
⑤⑥-⑦(*1) SR-G SOP-8D (2,500/Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
2
● _________________________________________________________________________ 2. LED Backlight Driver
*GreenOperation-compatible
Pin Configuration
NR3015
70
60
50
40
30
20
10 VIN=3.0V
0
0 5 10 15 20 25 30
LED Currrent : ILED (mA)
Ordering Information
XC9133①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Lx Overvoltage Limit B 19V (TYP.)
②③ FB Voltage 02 0.2V (±5.0%)
④ Oscillation Frequency A 1MHz
⑤⑥-⑦(*1) Package (Order Unit) MR-G SOT-25 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
3
3. Schottky Diodes ________________________________________________________________________________
1.10-1.30
1.50-1.70
Applications
●Low Current Rectification
0.51-0.77
XBS013S15R-G* SOD-523 3,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully Unit: mm
EU RoHS compliant. SOD-523
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=1mA - 0.31 - V
Forward Voltage
VF2 IF=100mA - 0.71 1 V
Reverse Current IR VR=25V - - 2 μA
Inter-Terminal Capacity Ct VR=0V , f=1MHz - 6 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA - 2 - ns
*2:trr measurement circuit
Applications
●Low Current Rectification
Cathode Bar
Product Name
0.525-0.65
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=1mA - 0.31 - V
Forward Voltage
VF2 IF=100mA - 0.71 1 V
Reverse Current IR VR=25V - - 2 μA
Inter-Terminal Capacity Ct VR=0V , f=1MHz - 6 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA - 2 - ns
*2:trr measurement circuit
4
_____________________________________________________________________________________________________ ●
3. Schottky Diodes
Forward Voltage : VF=0.53V (TYP.) 0.75-0.85
0.25-0.35
Forward Current : IF(AV)=200mA 0.08-0.15
Repetitive Peak Reverse Voltage : VRM=40V
1.10-1.30
1.50-1.70
Applications
●Low Current Rectification
0.51-0.77
XBS024S15R-G* SOD-523 3,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
Unit: mm
EU RoHS compliant.
SOD-523
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=10mA - 0.33 - V
Forward Voltage
VF2 IF=200mA - 0.53 0.6 V
Reverse Current IR VR=40V - - 2 μA
Inter-Terminal Capacity Ct VR=10V , f=1MHz - 5 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA - 4 - ns
*2:trr measurement circuit
0-0.1
2.50-2.70
1.60-1.80
Applications
●Rectification
●Protection against reverse connection of battery
Cathode Bar
Product Name
PRODUCT NAME PACKAGE MOQ
0.80-1.00
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=100mA - 0.28 - V
Forward Voltage
VF2 IF=500mA - 0.40 0.47 V
Reverse Current IR VR=20V - - 100 μA
Inter-Terminal Capacity Ct VR=10V , f=1MHz - 12 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA - 8 - ns
*2:trr measurement circuit
5
3. Schottky Diodes ________________________________________________________________________________
0.75-0.85
Forward Voltage : VF=0.40V (TYP.)
0.25-0.35
Forward Current : IF(AV)=500mA 0.08-0.15
Repetitive Peak Reverse Voltage : VRM=30V
Applications
1.10-1.30
1.50-1.70
●Rectification
●Protection against reverse connection of battery
0.51-0.77
XBS053V15R-G* SOD-523 3,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
Unit: mm
EU RoHS compliant.
SOD-523
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=100mA - 0.28 - V
Forward Voltage
VF2 IF=500mA - 0.40 0.47 V
Reverse Current IR VR=20V - - 100 μA
Inter-Terminal Capacity Ct VR=10V , f=1MHz - 12 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA - 8 - ns
*2:trr measurement circuit
0-0.1
2.50-2.70
1.60-1.80
Applications
●Rectification
●Protection against reverse connection of battery
Cathode Bar
Product Name
PRODUCT NAME PACKAGE MOQ
0.80-1.00
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=100mA - 0.34 - V
Forward Voltage
VF2 IF=1A - 0.49 0.54 V
Reverse Current IR VR=40V - 4 200 μA
Inter-Terminal Capacity Ct VR=10V , f=1MHz - 35 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA , RL=100Ω - 25 - ns
*2:trr measurement circuit
6
_____________________________________________________________________________________________________ ●
3. Schottky Diodes
Forward Voltage : VF=0.49V (TYP.) 1.50-1.70
0.45-0.65
Forward Current : IF(AV)=1A 0.08-0.15
2.60-2.80
3.55-3.85
Applications
●Rectification
●Protection against reverse connection of battery
1.05-1.25
XBS104S14R-G* SOD-123A 3,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant. Unit: mm
SOD-123A
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=100mA - 0.34 - V
Forward Voltage
VF2 IF=1A - 0.49 0.54 V
Reverse Current IR VR=40V - 4 200 μA
Inter-Terminal Capacity Ct VR=10V , f=1MHz - 35 - pF
Reverse Recovery Time*2 trr IF=IR=10mA , irr=1mA , RL=100Ω - 25 - ns
*2:trr measurement circuit
Applications
2.60-2.80
3.55-3.85
●Rectification
●Protection against reverse connection of battery
Product Name
Cathode Bar
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
VF1 IF=0.1A - 0.23 0.315 V
Forward Voltage VF2 IF=0.5A - 0.30 0.385 V
VF3 IF=1A - 0.365 0.41 V
Reverse Current IR VR=40V - 0.25 2 mA
Inter-Terminal Capacity Ct VR=1V , f=1MHz - 150 - pF
Reverse Recovery Time*2 trr - 41 - ns
*2:trr measurement circuit
7
3. Schottky Diodes ________________________________________________________________________________
Applications
●Rectification
●Protection against reverse connection of battery
Product Name
PRODUCT NAME PACKAGE MOQ
(*1)
XBS204V19R-G SMA-XG 2,000/Reel
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant.
Electrical Characteristics
Ta=25℃
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Forward Voltage VF IF=2A - 0.46 0.49 V
Reverse Current IR VR=40V - 0.04 0.1 mA
Applications
●Rectification
●Protection against reverse connection of battery
Product Name
5.1±0.25
EU RoHS compliant.
Electrical Characteristics
Ta=25℃
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
VF1 IF=0.5A - 0.265 0.34 V
Forward Voltage VF2 IF=1A - 0.295 0.36 V
VF3 IF=3A - 0.355 0.39 V
Reverse Current IR VR=30V - 0.35 3 mA
Inter-Terminal Capacity Ct VR=1V , f=1MHz - 385 - pF
Reverse Recovery Time trr IF=IR=10mA , irr=1mA - 90 - ns
8
_____________________________________________________________________________________________________ ●
3. Schottky Diodes
Forward Voltage : VF=0.39V(TYP.) 2.6±0.2
Forward Current : IF(AVE)=3A
Repetitive Peak Reverse Voltage : VRM=30V (0.2)
0.2MAX
4.45±0.2
5.1±0.25
Applications
●Rectification
●Protection against reverse connection of battery
1.2±0.3
Product Name 1.5±0.15 Cathode Bar
2.0±0.15
2.1±0.2
(*1)
XBS303V29R-G SMA-XG 2,000/Reel
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully Unit: mm
EU RoHS compliant.
Electrical Characteristics
Ta=25℃
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Forward Voltage VF IF=3A - 0.39 0.45 V
Reverse Current IR VR=30V - 0.2 0.6 mA
Applications
2.6±0.2
●Rectification
●Protection against reverse connection of battery
5.1±0.25
Product Name
2.1±0.2
2±0.15
(0.2)
1.2±0.3
EU RoHS compliant.
Electrical Characteristics
Ta=25℃
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Forward Voltage VF2 IF=3A - 0.465 0.510 V
IR1 VR=20V - 5 - μA
Reverse Current
IR2 VR=40V - 15 300 μA
Inter-Terminal Capacity Ct VR=1V , f=1MHz - 180 - pF
Reverse Recovery Time trr IF=IR=10mA , irr=1mA - 82 - ns
9
3. Schottky Diodes ________________________________________________________________________________
0.10±0.03
Ultra Small Package
Low VF
0.18±0.03
0.60±0.05
(0.31)
Applications
●Low Current Rectification
Product Name
PRODUCT NAME PACKAGE MOQ
0.30±0.03
XBS013V1DR-G* USP-2B01 10,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant.
* The device orientation is fixed in its embossed tape pocket. USP-2B01
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
Forward Voltage VF1 IF=10mA - - 0.37 V
Reverse Current IR VR=10V - - 7 μA
●NOTES ON USE
1. A package of this IC is a surface mounted package 0603 size with backside electrode structure. Compare to other
packages, fixation strength for the electrodes is weak due to its structure. Please keep away from mechanical stress to the
product when mounting or after mounting.
2. If the IC is mounted close to a board break line or fixed in screws, the IC or its electrodes may be caused damage as results
of board deformation and mechanical stress.
Applications
●Low Current Rectification
Product Name
PRODUCT NAME PACKAGE MOQ
XBS013R1DR-G* USP-2B01 10,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant.
* USP-2B01
The device orientation is fixed in its embossed tape pocket.
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
Forward Voltage VF1 IF=10mA - - 0.46 V
Reverse Current IR VR=10V - - 0.3 μA
●NOTES ON USE
1. A package of this IC is a surface mounted package 0603 size with backside electrode structure. Compare to other
packages, fixation strength for the electrodes is weak due to its structure. Please keep away from mechanical stress to the
product when mounting or after mounting.
2. If the IC is mounted close to a board break line or fixed in screws, the IC or its electrodes may be caused damage as results
of board deformation and mechanical stress.
10
_____________________________________________________________________________________________________ ●
3. Schottky Diodes
Ultra Small Package
Applications
●Low Current Rectification
Product Name
PRODUCT NAME PACKAGE MOQ
XBS013S1CR-G* USP-2B02 10,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant. USP-2B02
* The device orientation is fixed in its embossed tape pocket.
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNIT
MIN. TYP. MAX.
Forward Voltage VF1 IF=100mA - 0.71 1 V
Reverse Current IR VR=25V - - 2 μA
●NOTES ON USE
1. Please keep away from mechanical stress to the product when mounting or after mounting.
2. If the IC is mounted close to a board break line or fixed in screws, the IC or its electrodes may be caused damage as results
of board deformation and mechanical stress.
Features Applications
Low VF ●Low Current Rectification
Ultra Small Package
Environmentally Friendly: EU EU RoHS Compliant, Pb Free
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETERSYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF IF=10mA - - 0.35 V
Voltage
Reverse
IR VR=10V - - 10 μA
Current
11
3. Schottky Diodes ________________________________________________________________________________
Features Applications
Low VF ●Low Current Rectification
Environmentally Friendly: EU RoHS Compliant, Pb Free
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward VF1 IF=10mA - - 0.35 V
Voltage VF2 IF=200mA - - 0.50 V
Reverse IR1 VR=10V - - 10 μA
Current IR2 VR=30V - - 100 μA
Features Applications
Low VF ●Rectification
Environmentally Friendly: EU RoHS Compliant, Pb Free ●Protection against reverse connection of battery
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward VF1 IF=100mA - - 0.36 V
Voltage VF2 IF=500mA - - 0.49 V
Reverse
IR VR=20V 100 μA
Current
VR=0V,
Ct1 - - 85 pF
Terminal f=1MHz
Capacitance VR=10V,
Ct2 - - 20 pF
f=1MHz
12
_____________________________________________________________________________________________________ ●
3. Schottky Diodes
Features Applications
Low VF ●Rectification
Environmentally Friendly: EU RoHS Compliant, Pb Free ●Protection against reverse connection of battery
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF IF=1A - - 0.56 V
Voltage
Reverse
IR VR=40V 500 μA
Current
Terminal VR=0V,
Ct - - 230 pF
Capacitance f=1MHz
Features Applications
Low VF ●Rectification
Environmentally Friendly: EU RoHS Compliant ●Protection against reverse connection of battery
Electrical Characteristics
=Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward VF1 IF=1A - - 0.35 V
Voltage VF2 IF=3A - - 0.45 V
Reverse IR1 VR=20V 1 mA
Current IR2 VR=40V 2 mA
13
3. Schottky Diodes ______________________________________________________________________________ ●
Features Applications
Low VF ●Rectification
Environmentally Friendly: EU RoHS Compliant ●Protection against reverse connection of battery
Electrical Characteristics
=Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Forward
VF =IF 3A - - 0.75 V
Voltage
Reverse
IR =VR 60V 100 μA
Current
14
● ______________________________________________________ 4. Transient Voltage Suppressor (TVS)
●ESD protection
USP-3
(BOTTOM VIEW)
15
4. Transient Voltage Suppressor (TVS) ________________________________________________________
(IEC61000-4-2)
Environmentally Friendly : EU RoHS Compliant, Pb Free Ground 2 5
Applications
I/O Data line + 3 4
●USB2.0, Firewire ●HDMI Ver.1.3
●DVI
Applications
●USB2.0, Firewire ●HDMI Ver.1.3
●DVI
Applications
●Portable equipment
●Networking equipment
16
_____________________________________________________________________________________________________ ●
Applications
●USB2.0 ●Ethernet
●DVI
Applications
●Portable equipment
●Networking equipment
Applications
2
●USB2.0, Firewire ●HDMI Ver.1.3
●DVI
17
4. Transient Voltage Suppressor (TVS) ________________________________________________________
Applications
●ESD Protection
Applications
●Portable equipment
Applications
●Portable equipment
18
_____________________________________________________________________________________________________ ●
Applications
●Portable equipment
Applications
●USB 2.0, Firewire
●Video Graphics Card
●DVI
●Ethernet 10/100/1000
19
4. Transient Voltage Suppressor (TVS) ______________________________________________________ ●
Applications
●Lighting
●Communication equipment
●Industrial equipment
20
● ______________________________________________________________________________________________ 5. Bridge ICs
Features Applications
Forward Current: IF(AV)=1.0A ●Power supply module
5. Bridge ICs
Repetitive Peak Reverse Voltage: VRRM =100V~1000V ●AC Adapter, Battery charger
Environmentally Friendly: EU RoHS Compliant, Pb Free ●Home appliances
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNITS
MIN. TYP. MAX.
Forward Voltage VF IF=1A, Pulse measurement, per diode - - 1 V
Reverse Current IR VR=VRRM, Pulse measurement, per diode - - 10 μA
Junction Capacitance CJ VR=4V, f=1MHz - 10 - pF
Features Applications
Forward Current: IF(AV)=1.5A ●Power supply module
Repetitive Peak Reverse Voltage: VRRM =50V~1000V ●AC Adapter、Battery charger
Environmentally Friendly: EU RoHS Compliant, Pb Free ●Home appliances
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNITS
MIN. TYP. MAX.
Forward Voltage VF IF=1A, Pulse measurement, per diode - - 1.1 V
Reverse Current IR VR=VRRM, Pulse measurement, per diode - - 5.0 μA
Junction Capacitance CJ VR=4V, f=1MHz - 25 - pF
21
6. Switching Diodes _____________________________________________________________________________ ●
Applications
High Speed Switching Applications
Product Name
PRODUCT NAME PACKAGE MOQ
XBW21P0204-G* SOT-323 3,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant.
Electrical Characteristics
Ta=25℃
LIMITS
PARAMETER SYMBOL TEST CONDITIONS UNITS
MIN. TYP. MAX.
VF1 IF=10mA - - 0.855 V
Forward Voltage VF2 IF=50mA - 1.00 V
VF3 IF=150mA - 1.25 V
Reverse Current IR VR=25V - - 0.03 μA
VR=0V
Inter-Terminal Capacity Ct - - 1.5 pF
f=1MHz
IF=IR=10mA
Reverse Recovery Time trr irr=1mA - 4 - ns
RL=100Ω
22
● _________________________________________________________________________________ 7. Zener Diodes
Features Applications
Environmentally Friendly: EU RoHS Compliant, Pb Free ●For constant voltage
7. Zener Diodes
PRODUCT NAME PACKAGE MOQ ●SOD-523P Unit : inch (mm)
XBZ02P0751-G* SOD-523P 5,000/Reel
* The “-G” suffix denotes Halogen and Antimony free as well as being fully EU
RoHS compliant.
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Zener Voltage VZ = IZT 5mA 7.13 7.5 7.88 V
Zener ZZT1= IZT 5mA - - 15 Ω
Impedance ZZT2= IZT 1mA - - 80 Ω
Reverse
IR = VR 5.0V - - 1.0 μA
Current
Features Applications
Environmentally Friendly: EU RoHS Compliant, Pb Free ●For constant voltage
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Zener Voltage VZ = IZT 5mA 8.65 9.1 9.56 V
Zener ZZT1= IZT 5mA - - 15 Ω
Impedance ZZT2= IZT 1mA - - 100 Ω
Reverse
IR = VR 6.0V - - 0.5 μA
Current
23
7. Zener Diodes _________________________________________________________________________________ ●
Features Applications
Environmentally Friendly: EU RoHS Compliant, Pb Free ●For constant voltage
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Zener Voltage VZ IZT=5mA 11.4 12 12.6 V
Zener ZZT1 IZT=5mA - - 25 Ω
Impedance ZZT2 IZT=1mA - - 150 Ω
Reverse
IR VR=8.0V - - 0.1 μA
Current
Features Applications
Environmentally Friendly: EU RoHS Compliant ●For constant voltage
Electrical Characteristics
= Ta 25℃
TEST LIMITS
PARAMETER SYMBOL UNITS
CONDITIONS MIN. TYP. MAX.
Zener Voltage VZ IZT=5mA 34.2 36 37.8 V
Zener ZZT1 IZT=5mA - - 90 Ω
Impedance ZZT2 IZT=1mA - - 350 Ω
Zener Voltage IR VR=25.2V - - 0.1 μA
24
● _____________________________________________________________________________ 8. Power MOSFETs
8. Power MOSFETs
Pin Configuration Pin Assignment
D PIN PIN
3
FUNCTION
NUMBER NAME
1 G Gate
2 S Source
1 2
3 D Drain
G S
SOT-23
(TOP VIEW)
25
8. Power MOSFETs_____________________________________________________________________________ ●
SOT-23
(TOP VIEW)
26
● _______________________________________________ 9. Inductor Built-in micro DC/DC Converters
*GreenOperation-compatible
Pin Configuration
CL-2025/CL-2025-02
(BOTTOM VIEW)
80
Efficiency:EFFI(%)
4.2V
60 3.6V
VIN= 3.0V
40
20
VOUT =5.0V
0
0.01 0.1 1 10 100 1000
(TOP VIEW) Output Current:IOUT (mA)
(Note)『L1 and Lx』are connecting on PCB
Ordering Information
XCL101①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Load Disconnection
① Product Type
C VBAT Bypass
Output Voltage
②③ Output Voltage 18~50
e.g. VOUT=1.8V ⇒ ②=1, ③=8
④ Oscillation Frequency 1 1.2MHz
BR-G CL-2025 (3,000/Reel)
⑤⑥-⑦ (*1) Packages (Order Unit)
ER-G CL-2025-02 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
27
9. Inductor Built-in micro DC/DC Converters _________________________________________________
*GreenOperation-compatible
XCL201/XCL202 Series
400mA Inductor Built-in Step-Down “micro DC/DC” Converters
Pin Configuration
L1
7
VIN 6 1 LX
VSS 5 2 VSS
CE 4 3 VOUT
8
L2
CL-2025/CL-2025-02
(BOTTOM VIEW)
CIN 60
VIN= 5.5V
4.7μF
VSS VSS
CL
10μF 40
VOUT CE 5.0V XCL201(PWM)
400m 20
4.2V
L2
VOUT=3.3V
0
0.01 0.1 1 10 100 1000
(TOP VIEW)
* “L1 and LX”, and “L2 and VOUT” is connected by wiring. Output Current:IOUT (mA)
Ordering Information
XCL201①②③④⑤⑥-⑦: Fixed PWM control
XCL202①②③④⑤⑥-⑦: PWM / PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Functions Selection B CL Auto Discharge, High Speed Soft-start
Output voltage options
e.g. 1.2V → ②=1, ③=2
1.25V → ②=1, ③=C
②③ Output Voltage 08~40
0.05V increments :
0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E,
0.55=F, 0.65=H, 0.75=K, 0.85=L, 0.95=M
④ Oscillation Frequency 1 1.2MHz
BR-G CL-2025 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G CL-2025-02 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
28
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
XCL205/XCL206/XCL207 Series
600mA Inductor Built-in Step-Down “micro DC/DC” Converters
Pin Configuration
L1
7
VIN 6 1 Lx
Vss 5 2 Vss
8
L2
CL-2025/CL-2025-02
(BOTTOM VIEW)
Lx VIN
CIN 60
CL
Vss Vss 4.7μF VIN= 5.5V
10μF 5.0V
600mA 40 4.2V
VOUT CE/MODE XCL205/XCL207
(PWM)
20
L2
VOUT=3.3V
0
(TOP VIEW) 0.1 1 10 100 1000
* “L1 and LX”, and “L2 and VOUT” is connected by wiring. Output Current:IOUT (mA)
Ordering Information
XCL205①②③④⑤⑥-⑦: Fixed PWM control
XCL206①②③④⑤⑥-⑦: PWM / PFM automatic switching control
XCL207①②③④⑤⑥-⑦: Manual Mode Selection Pin (Semi-custom)
DESIGNATOR ITEM SYMBOL DESCRIPTION
A VIN≧2.0V, No CL auto discharge, Standard Soft-start
B VIN≧2.0V, CL auto discharge, High Speed Soft-start
Functions selection C VIN≧2.0V, CL auto discharge, Standard Soft-start
①
(All CE active high) G VIN≧1.8V, CL auto discharge, High Speed Soft-start
VIN≧1.8V, Output Voltage External Setting
F
CL discharge, High speed soft-start (Under Development)
Output voltage options
e.g. 1.2V → ②=1, ③=2
1.25V → ②=1, ③=C
②③ Output Voltage 08~40
0.05V increments :
0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E,
0.55=F, 0.65=H, 0.75=K, 0.85=L, 0.95=M
④ Oscillation Frequency 3 3MHz
AR-G CL-2025 (3,000Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
CR-G CL-2025-02 (3,000Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
29
9. Inductor Built-in micro DC/DC Converters _________________________________________________
*GreenOperation-compatible
XCL208/XCL209 Series
400mA Inductor Built-in Step-Down “micro DC/DC” Converters
Pin Configuration
L1
VIN 8 1 PVSS
9
NC 7 2 LX
CE 6 3 NC
10
AVSS 5 4 VOUT
L2
USP-10B03
(BOTTOM VIEW)
VIEW)
80
Efficency:EFFI(%)
60
VIN= 4.2V
5.0V
40
XCL208(PWM)
20
V OUT =3.3V
XCL208A / XCL208B XCL208F / XCL209F Type 0
/ XCL209A / XCL209B Type 0.01 0.1 1 10 100 1000
Output Current:IOUT (mA)
Ordering Information
XCL208①②③④⑤⑥: Fixed PWM control
XCL209①②③④⑤⑥: PWM / PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
VIN≧2.0V Fixed Output Voltage
A
Standard soft-start , No CL auto discharge
VIN≧2.0V Fixed Output Voltage
① Type B
High Speed soft-start, CL auto discharge
VIN≧1.8V Output Voltage External Setting
F
High Speed soft-start, CL auto discharge
10 1.0V
12 1.2V
15 1.5V
18 1.8V
②③ Output Voltage (*2)
25 2.5V
30 3.0V
33 3.3V
08 External Setting 0.8V(XCL208F/XCL209F)
④ Oscillation Frequency 3 3MHz
(*1)
⑤⑥ Package (Order Unit) DR USP-10B03 (3,000/Reel)
(*1)
Halogen free and EU RoHS compliant.
(*2)
When other output voltages (semi-custom) are needed, please contact your local Torex sales office for more information. Output voltage range is 0.8~4.0V.
30
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
Pin Configuration
L1
VIN 6 1 Lx
NC 5 2 Vss
CE 4 3 VOUT
8
L2
CL-2025-02
(BOTTOM VIEW)
Ordering Information
XCL210①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
B IOUT=50mA Without CL Auto Discharge
① Product Type
D IOUT=50mA With CL Auto Discharge
Output Voltage
②③(*1) Output Voltage 10~40
e.g. VOUT=1.8V⇒②=1, ③=8
④ Fixed number 1 Fixed number, VUVLO = 1.75V
Package
⑤⑥-⑦(*2) GR-G CL-2025-02 (3,000/Reel)
(Order Unit)
(*1)
VOUT=1.8V is standard.
(*2)
The “-G” suffix denotes Halogen and Antimony free as well as being fully RoHS compliant.
31
9. Inductor Built-in micro DC/DC Converters _________________________________________________
*GreenOperation-compatible
CE NC 100
XCL212
FB Lx
80
PGN
Efficiency : EFFI (%)
NC Lx
XCL211
60
40
20
USP-11B01
BOTTOM VIEW 0
(BOTTOM VIEW)
0.1 1 10 100 1000 10000
Output Current : IOUT (mA)
Ordering Information
XCL211①②③④⑤⑥ Fixed PWM
XCL212①②③④⑤⑥ PWM/PFM Auto Switching
DESIGNATOR ITEM SYMBOL DESCRIPTION
Fixed Soft-start
Chip Enable
Current Limiter
① Type B
Tharmal Shutdown
UVLO
CL Auto Discharge
②③ Reference Voltage 08 Reference Voltage is fixed at 0.8V
④ Oscillation Frequency 2 2.4MHz
⑤⑥(*1) Package (Order Unit) DR USP-11B01 (1,000/Reel)
(*1)
Halogen free and EU RoHS compliant.
32
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
VOUT 4 PGND 3 Lx 80
Efficiency : EFFI (%)
60
9 8
L2 L1 40
XCL213
PG
20
V IN=5.0V
USP-9B01 0
(BOTTOM VIEW) 0.1 1 10 100 1000 10000
Output Current : IOUT (mA)
Ordering Information
XCL213①②③④⑤⑥ Fixed PWM control
XCL214①②③④⑤⑥ PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
Fixed Output Voltage
Fixed Soft-start
Chip Enable
Current Limit
① Type B
Thermal Shutdown
Latch or Short Protection
UVLO
CL Auto Discharge
Output Voltage options
Ex) 1.2V → ②=1, ③=2
1.25V → ②=1, ③=C
②③ Output Voltage 08~36
0.05V Increments:
0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 0.55=F, 0.65=H,
0.75=K, 0.85=L, 0.95=M
④ Oscillation Frequency 3 3MHz
⑤⑥(*1) Package (Order Unit) DR USP-9B01(*2) (3,000/Reel)
(*1)
Halogen free and EU RoHS compliant.
(*2)
The USP-9B01 reels are shipped in a moisture-proof packing.
33
9. Inductor Built-in micro DC/DC Converters _______________________________________________ ●
*GreenOperation-compatible
PWM/PFM (XCL220)
synchronous rectification.
Circuit Protection: Thermal Shut Down
HiSAT-COT+PWM control (XCL219) or HiSAT-COT+automatic PWM/PFM Current Limit Circuit (Drop)
switching control (XCL220) can be selected. Short Circuit Protection (Latch)
The series have a high speed soft-start as fast as 0.3ms in typical for quick Functions: Soft-start Circuit Built-in
turn-on. With the built-in UVLO (Under Voltage Lock Out) function, the internal UVLO
P-channel driver transistor is forced OFF when input voltage becomes 2.0V or CL Discharge
lower. When CE=Low, the integrated CL discharge function which enables Output Capacitor: Low ESR Ceramic Capacitor
the electric charge at the output capacitor CL to be discharged via the internal Operating Ambient Temperature: -40℃~+105℃
discharge switch located between the LX and VSS pins. The power Package: CL-2025-02
consumption will be less than 1.0μA. Environmental Friendly: EU RoHS Compliant, Pb Free
(*)
HiSAT-COT is an original Torex term for High Speed Transient Response.
100
XCL220
80
Efficiency : EFFI (%)
60
CL-2025-02 40
XCL219
(BOTTOM VIEW)
Ordering Information
XCL219①②③④⑤⑥-⑦ PWM control
XCL220①②③④⑤⑥-⑦ PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
Output Voltage (Fixed)
CL Auto Discharge
Latch or Short Protection
UVLO
① Type B
Chip Enable
Current Limit
Soft-start (Fixed)
Thernal Shutdown
Output Voltage options
e.g.)1.2V → ②=1, ③=2
1.25V → ②=1, ③=C
②③ Output Voltage 08~36
0.05V Increments:
0.05=A,0.15=B,0.25=C,0.35=D,0.45=E,0.55=F,0.65=H,
0.75=K,0.85=L,0.95=M
④ Oscillation Frequency 3 3.0MHz
⑤⑥-⑦(*1) Package (Order Unit) FR-G CL-2025-02 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
34
● _________________________________________ 10. Step-Down DC/DC Converters and Controller ICs
USP-6C
(BOTTOM VIEW)
Ordering Information
XC6365①②③④⑤⑥-⑦: PWM control
XC6366①②③④⑤⑥-⑦: PWM/PFM switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A VOUT type: internally set-up, Soft-start internally set-up
B FB type: externally set-up, Soft-start internally set-up
① Type of DC/DC Converter
C VOUT type: internally set-up, Soft-start externally set-up
D FB type: externally set-up, Soft-start internally set-up
15~60 VOUT type: 3.0V output →②=3, ③=0
②③ Output Voltage
10 FB type: 10 fixed →②=1, ③=0 fixed
3 300kHz
④ Oscillation Frequency 5 500kHz (custom)
2 180kHz (custom)
(*1) MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
35
10. Step-Down DC/DC Converters and Controller ICs ______________________________________
*GreenOperation-compatible
36
___________________________________________________________________________________________________________________ ●
Pin Configuration
V IN EXT/
5 4
CE/C SS 6 1 V IN
V SS 5 2 NC
FB 4 3 EXT/
1 2 3
CE/CSS V SS FB
USP-6C (BOTTOM VIEW)
SOT-25 (TOP VIEW)
V IN
Pch
1
RIN=10Ω
MOSFET
RS ENS E
GND
2
L ( f or ceramic CL )
VOUT
EXT
FB
3
CFB R FB1
SBD
CL
R FB2
Ordering Information
XC9220①②③④⑤⑥-⑦ : Fixed PWM control
XC9221①②③④⑤⑥-⑦ : PWM/PFM automatic switching control
37
10. Step-Down DC/DC Converters and Controller ICs ______________________________________
*GreenOperation-compatible
level, or 0.6A (MIN.) when the LIM pin is low level for using the power Controls: PWM/PFM externally switching
supply which current limit value differs such as USB or AC adapter. Synchronized with an external clock signal
With the MODE/SYNC pin, the XC9223/XC9224 series provide mode Protection Circuits: Thermal shutdown
selection of the fixed PWM control or automatically switching current Integral latch method (Over current limit)
limit PFM/PWM control. As for preventing unwanted switching Short Circuit Protection
noise, the XC9223/9224 series can be synchronized with an external Soft-start: 1ms (TYP.)
clock signal within the range of ± 25% toward an internal clock signal Voltage Detector: 0.712V detect, N-ch open-drain
via the MODE/SYNC pin. For protection against heat damage of Operating Ambient Temperature: -40°C ~ +85°C
the ICs, the XC9223/XC9224 series build in three protection func- Packages: MSOP-10, USP-10B
tions: integral latch protection, thermal shutdown, and short-circuit Environmentally Friendly: EU RoHS Compliant, Pb Free
protection. With the built-in UVLO (Under Voltage Lock Out) func-
tion, the internal P-channel driver transistor is forced OFF when input
voltage becomes 1.8V or lower. The 9223/9224B series’ detector
function monitors the discretional voltage by external resistors.
Pin Configuration
FB 5 6 LIM
VIN 1 10 PGND
VDIN 2 9 LX VDOUT 4 7 MODE/SYNC
AGND 3 8 CE AGND 3 8 CE
VDOUT 4 7 MODE/SYNC
VDIN 2 9 LX
FB 5 6 LIM
VIN 1 10 PGND
MSOP-10
USP-10B
USP-10B
(TOP VIEW) ( BOTTOM VIEW )
(BOTTOM VIEW)
VIN PGND
1 VIN 10 L
VDIN VOUT
2 VDIN LX 9
AGND CE
3 CE 8 CFB
MODE/SYNC CL
VDOUT MODE/
4 VDOUT 7 RFB1 (ceramic)
SYNC
LIM
5 FB LIM 6
RFB2
Ordering Information
XC9223①②③④⑤⑥-⑦ <The common CE pin in the DC/DC block and the voltage detector block.>
XC9224①②③④⑤⑥-⑦ <No CE pin in the voltage detector block. (Constant operating of the voltage detector block) >
DESIGNATOR ITEM SYMBOL DESCRIPTION
Transistor built-in,
① Output voltage freely set (FB voltage), B With VD function
Current Limit: 0.6A/1.2A
0
②③ Reference Voltage Fixed reference voltage ①=0, ②=8
8
1 1MHz
④ DC/DC Oscillation Frequency
2 2MHz
AR-G MSOP-10 (1,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
DR-G USP-10B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
38
___________________________________________________________________________________________________________________ ●
*GreenOperation-compatible
XC9235/XC9236/XC9237 Series
600mA Synchronous Step-Down DC/DC Converters
5 4
●Efficiency vs. Output Current (fOSC=1.2MHz, VOUT=1.8V) CE/MODE 4 3 VOUT (FB) CE/MODE 4 3 VOUT
1 2 3
100 PWM/PFM Automatic Sw itching Control
VIN VSS CE/MODE
90
80 SOT-25 USP-6C USP-6EL
SOT-25 USP-6C USP-6EL
Efficency:EFFI(%)
70 (TOP
(Top VIEW)
View) (BOTTOM VIEW) (BOTTOM VIEW)
60 3.6V PWM Control
2.4V VIN= 4.2V
50
3.6V
Efficiency:
40 2.4V
30
20
10
0
WLP-5-03
0.1 1 10 100 1000
(BOTTOM VIEW)
Output Current:IOUT(mA)
Ordering Information
XC9235①②③④⑤⑥-⑦: Fixed PWM control
XC9236①②③④⑤⑥-⑦: PWM / PFM automatic switching control
XC9237①②③④⑤⑥-⑦: Fixed PWM control→PWM / PFM automatic switching manual selection
DESIGNATOR ITEM SYMBOL DESCRIPTION
A VIN≧2.0V, No CL discharge, Low speed soft-start
B VIN≧2.0V, CL discharge, High speed soft-start
Fixed Output voltage (VOUT)
C VIN≧2.0V, CL discharge, Low speed soft-start
Functional selection
① E VIN≧1.8V, CL discharge, Low speed soft-start
G VIN≧1.8V, CL discharge, High speed soft-start
Adjustable Output voltage (FB) D VIN≧1.8V, CL discharge, Low speed soft-start
Functional selection F VIN≧1.8V, CL discharge, High speed soft-start
Output voltage options
e.g. VOUT=2.8V→②=2, ③=8
Fixed Output Voltage
08 ~ 40 VOUT=2.85V→②=2, ③=L
(VOUT)
②③ 0.05V increments: 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E,
0.55=F, 0.65=H, 0.75=K, 0.85=L, 0.95=M
Adjustable Output Voltage Reference voltage is fixed in 0.8V
08
(FB) ②=0, ③=8
C 1.2MHz (*1)
④ Oscillation Frequency The “-G” suffix denotes Halogen and Antimony free as well as
D 3MHz
being fully EU RoHS compliant.
MR-G SOT-25 (3,000/Reel) (*2) (*2)
ER-G USP-6C (3,000/Reel)
SOT-25, USP-6EL package is available for the types A/B/C on-
⑤⑥-⑦(*1) Packages (Order Unit) ly.
4R-G USP-6EL (3,000/Reel) (*2) (*3)
0R-G WLP-5-03 (*3) (3,000/Reel) WLP-5-03 package is available for the types A/B only.
39
10. Step-Down DC/DC Converters and Controller ICs ______________________________________
*GreenOperation-compatible
With an internal switching frequency of 1.2MHz or 2.4MHz, small Oscillation Frequency: 1.2MHz (±15%), 2.4MHz (±15%)
external components can be used. Maximum Duty Cycle: 100%
The XC9242 series is PWM control, and the XC9243 series is Functions: Soft-Start Circuit Built-in
PWM/PFM, which automatically switches from PWM to PFM during CL Discharge
light loads and provides high efficiency, high load response, low Current Limit Circuit (automatic return)
voltage ripple, can be achieved over a wide range of load conditions. Thermal Shutdown
The series have a high speed soft-start as fast as 1ms in typical for UVLO
quick turn-on. It’s suitable for large-current application due to limit Output Capacitor: Low ESR Ceramic Capacitor
current is configured 4.0A in typical. During stand-by, all circuits are Control Methods: PWM (XC9242)
shutdown to reduce current consumption to as low as 1.0μA or less. PWM/PFM Auto (XC9243)
The integrated CL discharge function which enables the electric Operating Ambient Temperature: -40°C ~ +85°C
charge at the output capacitor CL to be discharged via the internal Packages: USP-10B, SOP-8FD
discharge switch located between the LX and VSS pins. Due to CL Environmentally Friendly: EU RoHS Compliant, Pb Free
discharge function, malfunction on LX is prevented when Stand-by
mode. With the built-in UVLO (Under Voltage Lock Out) function,
the internal P-channel driver transistor is forced OFF when input
voltage becomes 2.5V or lower. The series are available in
USP-10B and SOP-8FD packages.
70
60 VIN=5.0V
Typical Application Circuit
50
XC9242/XC9243 Series (USP-10B) 40
30
20
10
0
0.1 1 10 100 1000 10000
Output Current: IOUT (mA)
Ordering Information
XC9242①②③④⑤⑥-⑦: Fixed PWM control
XC9243①②③④⑤⑥-⑦: PWM / PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Functional Selection B With CL Discharge
②③ Output Voltage 08 Reference Voltage is fixed at 0.8V
C 1.2MHz
④ Oscillation Frequency
D 2.4MHz
DR-G USP-10B (3,000/Reel)(*2)
⑤⑥-⑦(*1) Packages (Order Unit)
QR-G SOP-8FD (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
USP-10B reels are shipped in a moisture-proof packing.
40
___________________________________________________________________________________________________________________ ●
*GreenOperation-compatible
80
Efficiency : EFFI (%)
USPN-6
60
(BOTTOM VIEW) VIN=4.2V
Typical Application Circuit 40 VIN=5.0V PWM Control
L VOUT VIN=4.2V
VIN 400mA 20
VIN Lx 5.0V
0
CE
CIN CE VOUT CL
0.1 1 10 100 1000
VSS (ceramic)
(ceramic)
Output Current : IOUT (mA)
Ordering Information
XC9244①②③④⑤⑥-⑦: Fixed PWM control
XC9245①②③④⑤⑥-⑦: PWM / PFM automatic switching control
Standard Voltage
DESIGNATOR ITEM SYMBOL DESCRIPTION PRODUCT NAME
VOUT(V)
① Type A With CL Auto Discharge Fixed PWM PWM/PFM Auto
Output voltage options 1.0V XC9244A10C7R-G XC9245A10C7R-G
e.g. 1.2V → ②=1, ③=2 1.2V XC9244A12C7R-G XC9245A12C7R-G
1.25V → ②=1, ③=C 1.5V XC9244A15C7R-G XC9245A15C7R-G
②③ Output Voltage 08~40
0.05V increments: 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 1.8V XC9244A18C7R-G XC9245A18C7R-G
0.55=F, 0.65=H, 0.75=K, 0.85=L, 0.95=M 2.5V XC9244A25C7R-G XC9245A25C7R-G
Refer to “Stadard Voltage” Table 2.8V XC9244A28C7R-G XC9245A28C7R-G
Oscillation 3.3V XC9244A33C7R-G XC9245A33C7R-G
④ C 1.2MHz
Frequency
* For other voltages, please contact your local Torex
Package sales office or representative.
⑤⑥-⑦(*1) 7R-G USPN-6 (5,000/Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
41
10. Step-Down DC/DC Converters and Controller ICs ______________________________________
*GreenOperation-compatible
BST GND FB 80
(*1)
70
SOT-26W USP-6C 60
( TOP VIEW ) ( BOTTOM VIEW )
50
40 XC9246@VIN=12V
Typical Application Circuit 30 XC9247@VIN=12V
20
10
0
1 10 100 1000
Output Current :I OUT(mA)
Ordering Information
XC9246B①②③④⑤-⑥ PWM Control
XC9247B①②③④⑤-⑥ PWM/PFM Automatic switching control
* Type B has EN/SS, current limit, latch function, UVLO, and thermal shutdown.
DESIGNATOR ITEM SYMBOL DESCRIPTION
42 4.15V (1.2V≦VOUT≦2.7V) VIN=4.5V~16.0V
65 5.65V (1.2V≦VOUT≦3.8V) VIN=6.0V~16.0V
①② UVLO Release Voltage 7.65V
75 (XC9246: 1.5V≦VOUT≦5.0V) VIN=8.0V~16.0V
(XC9247: 1.5V≦VOUT≦5.6V)
③ Oscillation Frequency C 1.2MHz
ER-G USP-6C (3,000/Reel)
④⑤-⑥(*1) Packages (Order Unit)
MR-G SOT-26W (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
42
___________________________________________________________________________________________________________________ ●
XC9248 Series 2.2A 18V Driver Transistor Built-In Synchronous Step-Down DC/DC Converter
Pin Configuration
VIN 1 8 LX
EN 2 7 GND
SS 3 6 BST
FB 4 5 VL
SOP-8FD
(TOP VIEW)
60
CIN CSS CVL CL RFB2 50 VIN=12V , VOUT=3.3V
40
30
20
10
0
0 500 1000 1500 2000
Output Current : IOUT [mA]
Ordering Information
XC9248①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① TYPE Refer to [Selection Guide]
B
②③ FB Voltage 08 FB voltage is fixed in 0.8V
④ Oscillation Frequency 5 500kHz
⑤⑥-⑦(*1) Package (Order Unit) QR-G SOP-8FD (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
Selection Guide
LATCH FOR CL
CURRENT LATCH FOR LATCH FOR THERMAL
TYPE CURRENT ENABLE UVLO AUTO-
LIMITER VOUT-SHORT LX-SHORT (*2) SHUTDOWN
LIMITER DISCHARGE
A YES YES (*1) YES YES YES YES YES YES
B YES NO NO YES YES YES YES YES
(*1)
The over-current protection latch is an integral latch type.
(*2)
To prevent an extremely large rush current from flowing in the event that Lx is short-circuited, both the A & B types have an Lx short protection latch function.
43
10. Step-Down DC/DC Converters and Controller ICs ___________________________________________
connecting an external resistor to the ROSC pin. The generation of PWM/PFM (MODE:L)
unneeded noise can be reduced by this synchronization with an ex- Soft-start: External set (External C)
ternal CLK within ±25% of the internal clock using the MODE/SYNC Protection Circuits: Over current limit (External Resistor)
pin. In automatic PWM/PFM control, the IC operates by PFM con- Automatic Return (XC9252A/B)
trol when the load is light to achieve high efficiency over the full load Integral latch protection (XC9252C)
range from light to heavy. Thermal shutdown
The soft start time can be set as desired by adding an external ca- Output Capacitor: Low ESR Capacitor
pacitance to the SS pin. Operating Ambient Temperature: -40℃~+105℃
With the built-in UVLO function, the driver transistor is forced OFF
Packages: TSSOP-16 (XC9252A/C)
when input voltage becomes 2.5V or lower.
USP-10B (XC9252B)
Internal protection circuits include over current protection,
Environmentally Friendly: EU RoHS Compliant, Pb Free
short-circuit protection, and thermal shutdown circuits to enable safe
use.
Pin Configuration
VIN ISENSE
L=22μH(CLF12555-220M), CIN =10μF(GRM32ER71H106KA12L),
CIN
R OSC =300kΩ, C L=22μF×2 (GRM32ER71E226KE15L),
CE EXTB PchMOSFET
RSENSE=50mΩ, PchMOSFET:2SJ668, SBD:CMS15
100
CCLAMP
L 90
VL CLAMP
80
Efficiency :EFFI[%]
CVL SBD
RFB1
CFB 70
SS XC9252 FB CL 60
CSS
RFB2 50
MODE/SYNC 40
30
20 PFM(MODE=L)
ROSC
10 PWM(MODE=H)
R OSC RPG
0
GND PG
1 10 100 1000 10000
Output Current :IOUT[mA]
Ordering Information
XC9252①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Standard Type (TSSOP-16)
① TYPE B Without Chip Enable, Power-Good (USP-10B)
C Standard Type with Latch Protection (TSSOP-16)
②③ Adjustable Output Voltage 08 Reference voltage is fixed in 0.8V
④ Oscillation Frequency A Adjustable
VR-G TSSOP-16 (3,000/Reel) * Only Type A, C
⑤⑥-⑦ (*1) Packages (Order Unit)
DR-G USP-10B (3,000/Reel) (*2)* Only Type B
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
The USP-10B reels are shipped in a moisture-proof packing.
44
___________________________________________________________________________________________________________________ ●
XC9257x18E / XC9258X18E
L = GLCLKR4701A(0.47μH)
CIN = 10μF(GRM155R61A106M) CL = 10μF×2(GRM155R61A106M)
100
90
80
70
VIN=3.7V
Efficiency: EFFI (%)
60
20 VIN=3.7V
10 VIN=5.0V
0
0.1 1 10 100 1000
Output Current: IOUT (mA)
Ordering Information
XC9257①②③④⑤⑥-⑦ PWM control
XC9258①②③④⑤⑥-⑦ PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to [Selection Guide]
B
Output voltage options
e.g. 1.2V → ②=1, ③=2
②③ Output Voltage 08~36 1.25V → ②=1, ③=C
0.05V increments : 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 0.55=F,
0.65=H, 0.75=K, 0.85=L, 0.95=M
C 1.2MHz
④ Oscillation Frequency
E 6MHz
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE OUTPUT VOLTAGE CL AUTO-DISCHARGE SHORT PROTECTION (LATCH) UVLO
A Fixed No No Yes
B Fixed Yes Yes Yes
45
10. Step-Down DC/DC Converters and Controller ICs ______________________________________
ripple and high efficiency over the full range of loads (from light load to heavy Current Limit (Pendent character)
load). Short Circuit Protection (Type B)
During stand-by, all circuits are shutdown to reduce current consumption to as
Functions: Soft-start
low as 1.0μA or less. As for the soft-start function as fast as 0.30ms in typical
for quick turn-on. With the built-in UVLO (Under Voltage Lock Out) function, UVLO
the internal P-channel MOS driver transistor is forced OFF when input voltage CL Discharge (Type B)
becomes 1.6V or lower. The B types integrate CL discharge function which Output Capacitor: Ceramic Capacitor
enables the electric charge at the output capacitor CL to be discharged via the Operating Ambient Temperature: -40℃~ +105℃
internal discharge. Package: LGA-8B01
Package is available in LGA-8B01 (1.2mm x 1.4mm x h0.3mm). Environmentally Friendly: EU RoHS Compliant, Pb Free
(*)
HiSAT-COT is an original Torex term for High Speed Transient Response.
XC9259x18E
L = GLCLKR4701A(0.47μH)
CIN = 10μF(GRM155R61A106M) CL = 10μF×2(GRM155R61A106M)
100
90
80
70 VIN=3.7V
Efficiency: EFFI (%)
60
30
20 VIN=3.7V
10
VIN=5.0V
0
0.1 1 10 100 1000
Output Current: IOUT (mA)
Ordering Information
XC9259①②③④⑤⑥-⑦ PWM control ⇔PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to [Selection Guide]
B
Output voltage options
e.g. 1.2V → ②=1, ③=2
②③ Output Voltage 08~36 1.25V → ②=1, ③=C
0.05V increments : 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 0.55=F,
0.65=H, 0.75=K, 0.85=L, 0.95=M
C 1.2MHz
④ Oscillation Frequency
E 6MHz
⑤⑥-⑦(*1) Package (Order Unit) 1R-G LGA-8B01 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
OUTPUT
TYPE CL AUTO-DISCHARGE SHORT PROTECTION (LATCH) UVLO
VOLTAGE
A Fixed No No Yes
B Fixed Yes Yes Yes
46
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
XC9260A18D / XC9261A18D
L = LQM2MPN1R0MGH(1.0μ H)
CIN=10μ F(GRM155R61A106M) CL=10μ F(GRM155R61A106M)
100
90
80
Efficiency: EFFI (%)
70
60 VIN = 5.0V XC9261
PGND AGND
CCININ CLL
(ceramic) (ceramic)
Ordering Information
XC9260①②③④⑤⑥-⑦ PWM control
XC9261①②③④⑤⑥-⑦ PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to [Selection Guide]
B
Output voltage options
e.g. 1.2V → ②=1, ③=2
②③ Output Voltage 08~36 1.25V → ②=1, ③=C
0.05V increments : 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 0.55=F, 0.65=H, 0.75=K,
0.85=L, 0.95=M
C 1.2MHz
④ Oscillation Frequency
D 3MHz
PR-G SOT-89-5 (1,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE OUTPUT VOLTAGE CL AUTO-DISCHARGE SHORT PROTECTION (LATCH) UVLO
A Fixed No No Yes
B Fixed Yes Yes Yes
47
10. Step-Down DC/DC Converters and Controller ICs ___________________________________________
*GreenOperation-compatible
the MODE pin, and a high-speed response, low ripple, and high efficiency are PWM Control
achieved across the entire load range, from light loads to heavy loads. PWM/PFM Auto
During stand-by, all circuits are shutdown to reduce current consumption to as Protection Circuits: Thermal Shutdown
low as 1.0μA or less. As for the soft-start function as fast as 0.30ms in typical Current Limit (Pendent character)
for quick turn-on. With the built-in UVLO (Under Voltage Lock Out) function, the Short Circuit Protection (Type B)
internal P-channel MOS driver transistor is forced OFF when input voltage Functions: Soft-start
becomes 2.0V or lower. The B types integrate CL High Speed discharge func- UVLO
tion which enables the electric charge at the output capacitor CL to be dis- CL High Speed Discharge (Type B)
charged via the internal discharge. Capacitor: Ceramic Capacitor
The package is the ultra-small 1.2mm × 1.4mm × h0.3mm LGA-8B01. Operating Ambient Temperature: - 40℃ ~ + 105℃
(*)
HiSAT-COT is an original Torex term for High Speed Transient Response. Package: LGA-8B01
Environmentally Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
70
AGND MODE 60 VIN = 5.0V PFM/PWM
CININ MODE CLL 50 VIN = 3.7V PWM
(ceramic) (ceramic) 40
PGND NC 30
VIN = 5.0V
20
VIN = 3.7V
10
0
0.1 1 10 100 1000 10000
Output Current: IOUT (mA)
Ordering Information
XC9262①②③④⑤⑥-⑦ PWM control ⇔PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① Type Refer to [Selection Guide]
B
Output voltage options
e.g. 1.2V → ②=1, ③=2
②③ Output Voltage 08~36 1.25V → ②=1, ③=C
0.05V increments : 0.05=A, 0.15=B, 0.25=C, 0.35=D, 0.45=E, 0.55=F,
0.65=H, 0.75=K, 0.85=L, 0.95=M
C 1.2MHz
④ Oscillation Frequency
D 3MHz
⑤⑥-⑦(*1) Package (Order Unit) 1R-G LGA-8B01 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE OUTPUT VOLTAGE CL AUTO-DISCHARGE SHORT PROTECTION (LATCH) UVLO
A Fixed No No Yes
B Fixed Yes Yes Yes
48
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
XC9265 Series Ultra Low Power Synchronous Step-Down PFM DC/DC Converter
Pin Configuration
LX VOUT
5 4
VIN 6 1 LX
NC 5 2 GND
CE 4 3 VOUT
1 2 3
VIN GND CE
USP-6EL
SOT-25 (BOTTOM VIEW)
(TOP VIEW)
GND
3.6V
60
4.2V
40
20
0
0.01 0.1 1 10 100 1000
Output Current : IOUT (mA)
Ordering Information
XC9265①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A IOUT=200mA Without CL Auto Discharge
B IOUT=50mA Without CL Auto Discharge
① Product Type
C IOUT=200mA With CL Auto Discharge
D IOUT=50mA With CL Auto Discharge
Output Voltage
②③(*1) Output Voltage 10~40
e.g. VOUT=1.8V⇒②=1, ③=8
④ Fixed number 1 Fixed number, VUVLO = 1.8V
(*2) Packages 4R-G USP-6EL (3,000/Reel)
⑤⑥-⑦
(Order Unit) MR-G SOT-25 (3,000/Reel)
(*1)
VOUT=1.8V is standard.
(*2)
The “-G” suffix denotes Halogen and Antimony free as well as being fully RoHS compliant.
49
10. Step-Down DC/DC Converters and Controller ICs ____________________________________ ●
XC9270x085/XC9271x085
CE 2 7 BST
(VIN=12V , VOUT=5V)
SYNC 3 6 GND
Pin Configuration 70
60
50
40
30
20 XC9271
10 XC9270
0
1 10 100 1000 10000
Output Current :I OUT[mA]
Ordering Information
XC9270①②③④⑤⑥-⑦ PWM control
XC9271①②③④⑤⑥-⑦ PWM/PFM automatic switching control
●Selection Guide
Control Method Over Current Protection FREQUENCY PRODUCT NAME
300kHz XC9270A083QR-G
Latching
500kHz XC9270A085QR-G
PWM Fixed
300kHz XC9270B083QR-G
Automatic Recovery
500kHz XC9270B085QR-G
300kHz XC9271A083QR-G
Latching
500kHz XC9271A085QR-G
PWM/PFM
300kHz XC9271B083QR-G
Automatic Recovery
500kHz XC9271B085QR-G
50
● _____________________________________________ 11. Step-Up DC/DC Converters and Controller ICs
*GreenOperation-compatible
1 2 3
VOUT VDD CE 1 2 3
(FB) CE VOUT NC
SOT-25 SOT-25
(TOP VIEW) (TOP VIEW)
Ordering Information
XC6367①②③④⑤⑥-⑦: PWM control
XC6368①②③④⑤⑥-⑦: PWM/PFM switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A VOUT type: VOUT internally set-up, Soft-start internally set-up
B FB type: VOUT externally set-up, Soft-start internally set-up
C VOUT type: VOUT internally set-up, Soft-start externally set-up
① Type of DC/DC Converter
D FB type: VOUT externally set-up, Soft-start externally set-up
E VOUT type: VOUT internally set-up, Soft-start internally set-up
F VOUT type: VOUT internally set-up, Soft-start externally set-up
15 ~ 65 VOUT type: 3.0V output →②=3, ③=0
②③ Output Voltage
10 FB type (B, D types): 10 fixed →②=1, ③=0 fixed
3 300kHz
1 100kHz
④ Oscillation Frequency
2 180kHz (custom)
5 500kHz (custom)
⑤⑥-⑦ (*1) Package (Order Unit) MR-G SOT-25 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
51
11. Step-Up DC/DC Converters and Controller ICs _________________________________________
*Green Operation-compatible
The XC6371 series is the standard PWM controlled products. The control of Phase compensation and soft start circuits built-in
the XC6372 series switches from PWM to PFM control during light loads when Operating Ambient Temperature: -30°C ~ +85°C
automatically switching is selected and the series is highly efficient from light
Packages: SOT-89, SOT-89-5, USP-6B
loads to large output currents.
Environmentally Friendly: EU RoHS Compliant, Pb Free.
XC637xA 1 2 3 1 2 3
VSS VOUT LX NC VOUT CE
XC637xA XC637xC
VSS 6 1 VOUT
NC 5 2 NC
LX 4 3 CE
USP-6B
(BOTTOM VIEW)
XC637xC
Ordering Information
XC6371①②③④⑤⑥-⑦: Fixed PWM control
XC6372①②③④⑤⑥-⑦: PWM / PFM switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
A 3-pin regulator with built-in switching transistor
① Type of Regulator
C Stand-by capability with built-in switching transistor
②③ Output Voltage 20 ~ 70 e.g. VOUT=3.5V→②=3, ③=5
0 50kHz
④ Oscillation Frequency 1 100kHz
2 180kHz
SOT-89 (XC6371/72A type) (1,000/Reel)
PR-G
⑤⑥-⑦(*1) Packages (Order Unit) SOT-89-5 (XC6371/72C types) (1,000/Reel)
DR-G USP-6B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
52
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
XC9103/XC9104/XC9105 Series
Ceramic Cap. Compatible Step-up DC/DC Controllers
EXT GND
5 4
1 2 3
FB VDD CE USP-6B
SOT-25 (BOTTOM VIEW)
(TOP VIEW)
53
11. Step-Up DC/DC Converters and Controller ICs _________________________________________
*Green Operation-compatible
and reduced PCB area requirements. Tantalum and electrolytic High Efficiency: 85% (TYP.)
capacitors can also be used, in which case, RSENSE becomes un- Low Quiescent Current: 14μA (TYP.)
necessary. Stand-by Current: 1.0μA (MAX.)
Oscillation frequencies of high clock, low ripple 300kHz and low Output Capacitor: Low ESR Ceramic
quiescent current 100kHz are available. Operating Ambient Temperature: -40°C ~ +85°C
The XC9107 series are PWM/PFM automatic switching controlled. Packages: SOT-25, USP-6B
Control switches from PWM to PFM during light loads with the Environmentally Friendly: EU RoHS Compliant, Pb Free
XC9107 and the series is highly efficient from light loads to large
output currents. By bringing the whole circuit down while the series
is in the stand-by mode (CE/PWM pin : low), quiescent current can
be reduced to less than 1.0μA.
EXT GND
25 25
2.5V
20 20
V OUT (V)
V OUT (V)
2.0V
15 15
1.5V
10 10
5 5 Vref=0.8V
0 0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.1 1 10 100 1000
Vref (V) IOUT (mA)
Ordering Information
XC9106D①②③④⑤-⑥: PWM Fixed Control
XC9107D①②③④⑤-⑥: PWM / PFM Automatic Switching Control
54
___________________________________________________________________________________________________________________ ●
Pin Configuration
Lx/EXT VSS VOUT
5 4
VSS 6 1 VOUT/VDD
NC 5 2 NC
Lx/EXT 4 3 CE/VOUT
1 2 3
CE/V OUT VOUT/V DD NC
USP-6C
SOT-25
(BOTTOM VIEW)
(TOP VIEW) SOT-23 (TOP VIEW) SOT-89 (TOP VIEW)
2.4V
60
VOUT
1.5V
+
40
SD
CL 1.2V
VIN=0.9V
(Tantalum)
20
GND 0
CE 0 50 1 00 150 2 00 250 3 00
Output Current:IOUT(mA )
Ordering Information
XC9110①②③④⑤⑥-⑦: Fixed PFM control, 75% duty
XC9111①②③④⑤⑥-⑦: Fixed PFM control, 56% / 75% duty variable
DESIGNATOR ITEM SYMBOL DESCRIPTION
A VDD / VOUT common type (for XC9111) Built-in Transistor
B VDD / VOUT common type ( for XC9111) External Transistor
C CE pin Built-in Transistor
① CE Function
D CE pin External Transistor
E VDD / VOUT separated type Built-in Transistor
F VDD / VOUT separated type External Transistor
②③ Output Voltage 15 ~ 70 ex. 3.5V output →②= 3,③= 5
④ Maximum Oscillation Frequency 1 100kHz
①=A~B SOT-23 (3,000/Reel)
MR-G
①=C~F SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
PR-G ①=A~B SOT-89 (1,000/Reel)
ER-G ①=C~F USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
55
11. Step-Up DC/DC Converters and Controller ICs _________________________________________
board area solution can be achieved using a chip coil and an ultra Lx Limit Current: 400mA (VDD:3.6V)
small ceramic output capacitor. Operating Ambient Temperature: -40°C ~ +85°C
With the current limit function (400mA (TYP.): VDD=3.6V), a peak Packages: SOT-25, USP-6C
current, which flows through built-in driver transistors can be limited. Environmentally Friendly: EU RoHS Compliant, Pb Free
Soft-start time can be adjusted by external resistors and capacitors.
The stand-by function enables the output to be turned off (CE ’L’),
that is, the quiescent current will be less than 1.0μA.
Pin Configuration
VDD CE/SS
FB
CE/SS
NC LX
VDD VSS
LX VSS FB
SOT-25 USP-6C
(TOP VIEW) (BOTTOM VIEW)
Ordering Information
XC9119D①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
①② Output Voltage 10 FB voltage 1.0V (±2.0%)
③ Oscillation Frequency A 1MHz
MR-G SOT-25 (3,000/Reel)
④⑤-⑥(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
56
_____________________________________________________________________________________________________ ●
*Green Operation-compatible
XC9120/XC9121/XC9122 Series
Step-Up DC/DC Controller, MAXDUTY: 93%
Pin Configuration
(CE( / PWM))*
CFB: 33pF
RFB1:
VOUT=15V 470kΩ RFB2: 30kΩ
1 5 Nch Power
MOS FET CIN
VIN=
Ceramic CL: 2 XP161A1355
2.7V~4.2V
10uF x 4
3 4
CE
Ordering Information
XC9120①②③④⑤⑥-⑦: Fixed PWM control
XC9121①②③④⑤⑥-⑦: PWM / PFM automatic switching control
XC9122①②③④⑤⑥-⑦: PWM / PFM externally switching control
57
11. Step-Up DC/DC Converters and Controller ICs _______________________________________________
*Green Operation-compatible
XC9128/XC9129 Series
1A Driver Transistor Built-in, Step-Up DC/DC Converters
series enters from PWM to PFM to reduce switching loss when load Maximum Current Limit: 1.2A (MIN.), 2.0A (MAX.)
current is small. When load current is large, the series enters au- Low Quiescent Current: 30μA (TYP.)
Controls: PWM, PWM/PFM control
tomatically to the PWM mode so that high efficiency is achievable
externally switching
over a wide range of load conditions. The series provide small High Speed
output ripple from light to large loads by using the built-in circuit Transient Response: 100mV @ VOUT=3.3V, VIN=1.8V, IOUT=10mA
which enables the transition between PWM and PFM smoothly. →100mA
When voltage higher than the input voltage is applied to the output Protection Circuits: Thermal shutdown
during shut-down, the input and the output are isolated and the IC Integral latch method (Over current limit)
allows parallel drive with such as AC adaptor. Soft-start: 5ms (TYP.)
Ceramic Capacitor Compatible
Adaptor Enable Function (XC9128)
Operating Ambient Temperature:
-40°C ~ +85°C
FO (XC9128): Open-drain output
Packages: MSOP-10, USP-10B
Environmentally Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
FO 5 5 6 6ANC
E N/
NC
E N4
EN 4 7 7AAGGND
ND
BAT 3 8 8FB
FB
BAT 3
L x2
Lx 2 9 9MO DE
MODE
P G ND 1 VO
1 010 VUT
OUT
USP-10B
US P -1 0B
(BOTTOM
( B O TTO M VIEW)
V IE W )
XC9129
XC9128
3 BAT FB 8
60
EN AGND
4 EN 7 3.7V VIN=1.8V
FO RFB2 40
5 FO AEN/ 6
20 PWM(MODE:H)
PWM/PFM(MODE:L)
0
0.1 1 10 100 1000
Output Current : IOUT (mA)
Ordering Information
XC9128①②③④⑤⑥-⑦・・・Adaptor Chip Enable Pin and Flag Output Pin are added XC9129①②③④⑤⑥-⑦・・・Adaptor Chip Enable Pin and Flag Output Pin are not added
DESIGNATOR ITEM SYMBOL DESCRIPTION DESIGNATOR ITEM SYMBOL DESCRIPTION
B With integral protection With integral protection
① Integral Protection B
D Without integral protection ① Integral Protection (under development)
Fixed Reference D Without integral protection
②③ 45 0.45V
Voltage Fixed Reference
②③ 45 0.45V
④ Oscillation Frequency C 1.2MHz Voltage
Packages AR-G MSOP-10 (1,000/Reel) ④ Oscillation Frequency C 1.2MHz
⑤⑥-⑦(*1)
(Order Unit) DR-G USP-10B (3,000/Reel) Package
⑤⑥-⑦(*1) DR-G USP-10B (3,000/Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
58
_____________________________________________________________________________________________________ ●
*Green Operation-compatible
Pin Configuration
70
2.4V
60
50
40
30
20 PWM/PFM
PWM
10
0
0.1 1 10 100 1000
Output Current: I OUT (mA)
Ordering Information
XC9131①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
F Available
① CL Discharge
H Not Available
②③ Reference Voltage (FB) 05 0.5V (Fixed)
④ Oscillation Frequency C 1.2MHz
Package
⑤⑥-⑦(*1) DR-G USP-10B (3,000/Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
59
11. Step-Up DC/DC Converters and Controller ICs _________________________________________
*Green Operation-compatible
100
80
Efficiency : EFFI (%)
60
3.0V
PWM/PFM 2.5V
40
XC9135 Series XC9136 Series VIN=1.8V
20
Typical Application Circuits PWM
0
●XC9135 Series ●XC9136 Series
0.1 1 10 100 1000
Output Current : IOUT (mA)
Ordering Information
XC9135①②③④⑤⑥-⑦・・・・・・・・・・VOUT product with UVLO integral latch protection
XC9136①②③④⑤⑥-⑦・・・・・・・・・・VOUT product
DESCRIPTION (*2) ( ・・・With the functions ・・・Without the functions)
UVLO
DESIGNATOR ITEM SYMBOL UVLO UVLO UVLO≦1.2 1.2<UVLO LATCH CL AUTO
DETECT DE-
0.85V 1.6V Outside Standard Outside Standard PROTECTION DISCHARGE (*3)
LAY
A
XC9135 series C
Output voltage internally fixed(VOUT) B
K
L
①
XC9135 series M
Semi custom(*5) R
T
XC9136 series E
Output voltage internally fixed(VOUT) N
Output Voltage(*4)
Output Voltage (VOUT)
18~50 e.g.) 1.8V→②=1, ③=8
(XC9135A,C,B,K/XC9136 Series)
②③ e.g.) 5.0V→②=5, ③=0
Output Voltage (VOUT)
01~99 Semi custom serial numbers starting from 01(*5)
(XC9135L,M,R,T Series)
④ Oscillation Frequency C 1.2MHz
⑤⑥-⑦(*1) Package (Order Unit) DR-G USP-10B (3,000/Reel) (*6)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
(*2)
The SYMBOL of DESIGNATOR① is decided by the combination of with or without “UVLO”, “UVLO DETECT DELAY”, “FO”, “LATCH PROTECTION”, and “CL DISCHARGE”.
Example: ・・・With the functions ・・・Without the functions
(*3)
Example: ・・・VOUT pin can not be connected to the different output pin such as another supply (AC adaptor).
・・・VOUT pin can be connected to the different output pin such as another supply (AC adaptor).
(*4)
The XC9135A, XC9135C, XC9135L, limit their selection rang in 2.8V to 5V. The other products have the range from 1.8V to 5V.
(*5)
The XC9135L, XC9135M, XC9135R, XC9135T are semi-custom products. Please consult with your Torex sales contact.
(*6)
The XC9135/XC9136 reels are shipped in a moisture-proof packing. Please consult with your Torex sales contact.
60
_____________________________________________________________________________________________________ ●
*Green Operation-compatible
Pin Configuration
LX VOUT
5 4
1 2 3
CE GND VBAT
SOT-25
(TOP VIEW)
CE 3.0V VBAT=1.8V
60
VVIN=0.9~5.5V
BAT =0.9~5.5V
VBAT GND 40
CCININ=10μF
=4.7μF
20
0
0.01 0.1 1 10 100 1000
Output Current : I OUT (mA)
Ordering Information
XC9140①②③④⑤⑥-⑦ PFM contrtol
DESIGNATOR ITEM SYMBOL DESCRIPTION
(*1) A Load Disconnection Without CL Auto Discharge
① Product Type
C VBAT Bypass Without CL Auto Discharge
(*2) Output Voltage
②③ Output Voltage 18~50
e.g. VOUT=3.3V⇒②=3, ③=3
1 No UVLO
④ UVLO Function
2 UVLO Function, VUVLO_R=2.15V
(*3) 4R-G USP-6EL (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
MR-G SOT-25 (3,000/Reel)
(*1)
The product with the CL discharge function is a semi-custom product.
(*2)
VOUT=3.3V is standard.
(*3)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHs compliant.
61
12. Step-Up&Down DC/DC Controller ICs ___________________________________________________________
*GreenOperation-compatible
against rush currents when the power is switched on and also Package: SOT-25
against voltage overshoot. Environmentally Friendly: EU RoHS Compliant, Pb Free
During shutdown (CE pin = L), consumption current can be reduced
to as little as 0.5μA or less.
Pin Configuration
CE VOUT
100
80
Efficiency:EFFI(%)
60
VIN=2V
40
4V
20
6V
0
0.1 1 10 100 1000
Output Current
Output Current:I UT(mA)
:OlOUT (mA)
Ordering Information
XC9301①②③④⑤⑥-⑦: PWM Control
XC9302①②③④⑤⑥-⑦: PWM / PFM switching control
62
___________________________________________________________________________________________________________________
●
*GreenOperation-compatible
XC9303 Series High Efficiency, Synchronous Step-Up & Down DC/DC Controller ICs
Pin Configuration
EXT1 1 8 EXT 2
VDD 2 7 GND
PWM 3 6 FB
CE 4 5 NC
MSOP-8A
MSOP-8A
(TOPVIEW)
(TOP VIEW)
Ordering Information
XC9303①②③④⑤⑥-⑦
63
12. Step-Up&Down DC/DC Controller ICs _________________________________________________________ ●
*GreenOperation-compatible
mode (MODE pin: H) or PFM mode (MODE pin: L). Under the PFM Environmentally Friendly: EU RoHS Compliant, Pb Free
mode, the efficiency at right load current will be improved. When “L”
level is fed to CE pin, the product is in stand-by mode and the
consumption current is going to be 2.0μA (MAX.) or less. Regarding
other fanctions, the product has UVLO, Thermal shutdown
protection, Soft-start function. The soft-start time is approx. 100μs
and the output voltage can rise up quickly.
Pin Configuration
WLP-20-01
(TOP VIEW)
XC9306B05G0R Vout=3.3V
100
PFM
80
Efficiency : EFFI [%]
60
VIN=2.5V
40
4.2V
PWM
20
0
0.1 1 10 100 1000
Output Current : IOUT [mA]
Ordering Information
XC9306B①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
①② Output Voltage 05 Reference Voltage is fixed at 0.5V
③ Oscillation Frequency G 6MHz
④⑤-⑥(*1) Package (Order Unit) 0R-G WLP-20-01 (6,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
64
● _________________________________ 13. Multi channel DC/DC Converters and Controller ICs
*GreenOperation-compatible
2 VDD GND 9
GND 9 2 VDD
3 FB1 FB2 8
FB2 8 3 FB1
4 PWM1 PWM2 7
PWM2 7 4 PWM1
5 EN1 EN2 6
EN2 6 5 EN1
MSOP-10
(TOP VIEW) USP-10
(BOTTOM VIEW)
65
13. Multi channel DC/DC Converters and Controller ICs ___________________________________
*GreenOperation-compatible
signals. Control switches from PWM to PFM during light loads (Absolute Maximum Rating: 12.0V)
when automatic switching is selected and the series is highly efficient Oscillation Frequency: 180kHz (±15%)
from light loads through to large output currents. * 300kHz, 500kHz custom
Noise is easily reduced with PWM control since the frequency is Low Quiescent Current: 50μA (TYP.)
fixed. The series gives freedom of control selection so that control Stand-by Current: 3.0μA (MAX.)
suited to the application can be selected. Soft-start time is internally Soft-Start: 10ms
set to 10ms (Output 1) and offers protection against in-rush currents Operating Ambient Temperature: -40°C ~ +85°C
when the power is switched. This also prevents voltage overshoot. Packages: MSOP-10, USP-10
Environmentally Friendly: EU RoHS Compliant, Pb Free
MSOP-10
(TOP VIEW) USP-10
(BOTTOM VIEW)
66
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
MSOP-10
(TOP VIEW) USP-10
(BOTTOM VIEW)
67
13. Multi channel DC/DC Converters and Controller ICs ___________________________________
*GreenOperation-compatible
signals. Control switches from PWM to PFM during light loads Low Quiescent Current: 60μA (TYP.)
when automatic switching is selected and the series is highly efficient Stand-by Current : 3.0μF(MAX.)
from light loads through to large output currents. Noise is easily Oscillation Frequency : 180kHz, 300kHz, 500kHz
reduced with PWM control since the frequency is fixed. Operating Ambient Temperature: -40°C ~ +85°C
The series gives freedom of control selection so that control suited to Packages : MSOP-10, USP-10
the application can be selected. Environmentally Friendly: EU RoHS Compliant, Pb Free
Soft-start time is internally set to 10ms (output 1) which offers
protection against rush currents and voltage overshoot when the
power is switched on .
1 EXT1 EXT2/ 10
MSOP-10
USP-10 2 VDD GND 9
68
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
1 EXT1 EXT2 10 EXT2 10 1 EXT1 <XC9505B092A Input: 2 cell, VOUT: 3.3V, VOUT: - 5.0V
2 VDD GND 9
GND 9 2 VDD
3 FB1 FB2 8
FB2 8 3 FB1
4 PWM1 PW M2 7
PWM2 7 4 PWM1
5 EN1 EN2 6
EN2 6 5 EN1
MSOP-10
(TOP VIEW) USP-10
(BOTTOM VIEW)
69
13. Multi channel DC/DC Converters and Controller ICs ___________________________________
Pin Configuration
20 PVDD1
16 EN2
17 EN1
18 LX1
19 NC
Vout1 15 1 NC
MR 14 2 PVSS1
AVSS 13 ※1 3 NC
CD 12 4 PVSS2
QFN-20
Vout2 11 (BOTTOM VIEW) 5 NC
VDOUT 10
NC 9
LX2 8
NC 7
PVDD2 6
NC
LX1
EN1
EN2
PVDD
VOUT
NC
1 70
MR
Efficiency[%]
PVSS
1
MR
60
VOUT=1.5V
NC AVSS
50
PVSS
Cd
2 40
VOUT
NC Cd 30
VDOUT
2
PVDD
LX2
NC
NC
2
20
CIN2 RUP CL2 VOUT=1.8V
VDOUT 10
0
L2
1 10 100 1000
VOUT2
Output Current : IOUT [mA]
Ordering Information
XC9515①②③④⑤⑥-⑦ About①②③④ (Output Voltage, Detect Voltage)
DESIGNATOR ITEM SYMBOL DESCRIPTION XC9515①②③④ VOUT1 (V) VOUT2 (V) VDF (Detect Voltage) (V)
Input Voltage A Input Voltage Range 5V (±10.0%), UVLO Voltage 2.7V (TYP.) XC9515AB02 1.2 3.3 3.5
①
& UVLO B Input Voltage Range 2.5V ~ 5.5V, UVLO Voltage 1.8V (TYP.) XC9515AB04 1.5 3.3 3.5
A EN1, EN2, MR pins are not pulled up internally XC9515AB05 1.8 3.3 3.5
EN1, EN2 pins have built-in pull-up resistors, XC9515BA06 1.2 1.8 3.0
B
MR pin has a built-in pull-up resistor XC9515AA07 1.2 3.3 4.2
EN & MR logic XC9515AA08 3.3 1.8 4.5
②
control conditions EN1, EN2 Pins are not pulled up internally,
C
MR pin has a built-in pull-up resistor * This series are semi-custom products. For other combinations,
EN1, EN2 pins have built-in pull-up resistors, output voltages, detect voltage and etc., please ask Torex sales
D contacts.
MR pin are not pulled up internally
Set Voltage
③④ 01~ See About①②③④ Table
Combinations
(*1) Package
⑤⑥-⑦ ZR-G QFN-20 (1,000/Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
70
_____________________________________________________________________________________________________ ●
*Green Operation-compatible
L1 D1(SD)
VOUT
18 NC
VIN
16 LX
17 LX
CIN CL1
LX CFB R1
VIN
CDD FB
R2
DRV2 15 1 DRV1 PGND
CE CE
VOUT 14 2 CP2SWB CVL ROSC
ROSC
CVL (R9)
SWB 13 ※1 3 FB1
C5(R7)
CVL 12 4 CE CD
QFN-20 CD
FB2 11 (BOTTOM VIEW) 5 FB VOUT R8 CL2
SWB Tr1
VOUT R10
R3 CP2SWB Tr2
VSRC
AGND 10
CD 9
VIN 8
NC 7
ROSC 6
FB1
R4 D2 C1 C2
D4
VGL DRV1 DRV2
D5
CLcp1 VGH
AGND R5
D3 CLcp2
FB2
R6
0
1 10 100 1000
Iout[mA]
71
13. Multi channel DC/DC Converters and Controller ICs _________________________________ ●
control switches from PWM to PFM during light loads. The series is Over Voltage Protection
highly efficient from light loads through to large output currents. In Function: Control Pin
the PWM control mode, noise is easily reduced since the frequency Load Disconnect Pin
is fixed. The control mode can be selected for each application. The Phase Compensation Pin
soft start and current control functions are internally optimized. Ceramic Capacitor Compatible
During stand-by, all circuits in the IC are shutdown to reduce current Operating Ambient Temperature: -40 ~ +85°C
consumption to as low as 1.0μA or less. The device includes a gate Package: QFN-24
control pin for the P-channel MOSFET which is used for a load Environmentally Friendly: EU RoHS Compliant, Pb Free
(*1)
disconnection at the stand-by mode. The GAINP and GAINN pins VOUTPSET≧VIN+0.2V (VOUTPSET: Positive output voltage range)
(*2)
are used for loop compensation in order to optimize load transient VIN -VOUTNSET+VFN≦21.0V
response. With the built-in UVLO (Under Voltage Lock Out) function, (VFN : Forward voltage of SBDN, VOUTNSET : Nagative output voltage range)
the internal driver transistor is forced OFF when input voltage
becomes 2.2V or lower.
CFBP
RFBP1
SWP LXP VOUTP
P-ch MOS RSP CLP
BSW FBP
PVIN VREF
ENP FBN
XC9519
RFBN1
VIN CIN_SW CIN_P CIN_A ENN MODE
VOUTN
AGND VOUTN
SBDN
PGND LXN
RZP RZN LN
CZP CZN
Maximum
④ A 2.0A
VIN= 4.4V Current Limit
60
(*1) Package
3.6V ⑤⑥-⑦ ZR-G QFN-24 (1000/Reel)(*2)
(Order Unit)
2.7V (*1)
40 The “-G” suffix denotes Halogen and Antimony free as well as being fully
EU RoHS compliant.
(*2)
The XC9519 reels are shipped in a moisture-proof packing.
20 PWM/PFM (VMODE="H")
PWM (VMODE="L")
0
0.1 1 10 100 1000
Output Current:IOUT P, IOUT N (mA)
72
● ______________________________________________________________________________________14. Voltage Detectors
(BOTTOM VIEW) Supply Current vs. Input Voltage Supply Current vs. Input Voltage
1 2 3
* XC61G only XC61CC0902 (0.9V) XC61CC4502 (4.5V)
VOUT VIN VSS XC61GC0902 (0.9V) XC61GC4502 (4.5V)
(T Type)
TO-92
(SIDE VIEW)
Ordering Information
XC61C①②③④⑤⑥⑦-⑧
XC61G①②③④⑤⑥⑦-⑧
73
14. Voltage Detectors _____________________________________________________________________________
Pin Configuration
VIN
VIN
3
1 2
VOUT
V OUT
RESETB VSS 1 2 3
VOUT VIN VSS
SOT-23 SOT-89 1 2 3 VOUT
VOUT VIN VSS
(TOP VIEW) (TOP VIEW ) (T Type) SOT-23
VIN TO-92
VSS VOUT
* XC61F Series (L Type) (TOP VIEW)
(SIDE VIEW)
* XC61H Series
XC61FC3012
XC61HC3012
Ambient Temperature:Ta(℃)
Ordering Information
XC61F①②③④⑤⑥⑦-⑧
XC61H①②③④⑤⑥⑦-⑧
74
_____________________________________________________________________________________________________ ●
Pin Configuration
●SOT-25 ●USP-6C
XC6101, XC6102 Series XC6103 & XC6113 Series XC6104, XC6105 Series XC6101, XC6102 Series XC6103 & XC6113 Series XC6104, XC6105 Series
XC6111, XC6112 Series XC6114, XC6115 Series XC6111, XC6112 Series XC6114, XC6115 Series
Selection Guide
RESET OUTPUT RESET OUTPUT
SERIES WATCHDOG MANUAL RESET SERIES WATCHDOG MANUAL RESET
VDFL (RESETB) VDFH (RESET) VDFL (RESETB) VDFH (RESET)
XC6101 XC6111 Available Available CMOS - XC6105 XC6115 Available Not Available N-channel open drain CMOS
XC6102 XC6112 Available Available N-channel open drain -
XC6103 XC6113 Available Available - CMOS
XC6104 XC6114 Available Not Available CMOS CMOS
Ordering Information
XC61①②③④⑤⑥⑦⑧-⑨
DESIGNATOR ITEM SYMBOL DESCRIPTION DESIGNATOR ITEM SYMBOL DESCRIPTION
Hysteresis 0 VDF x 5% (TYP.) with hysteresis 1 6.25ms (TYP.)
①
Range 1 VDF x 0.1% (TYP.) without hysteresis 2 50ms (TYP.)
Functions and Watchdog and manual functions, and Watchdog Timeout 3 100ms (TYP.)
④
② Type of Reset 1~5 reset output type as per Selection Guide Period 4 200ms (TYP.)
Output in the above chart 5 400ms (TYP.)
A 3.13ms (TYP.) 6 1.6s (TYP.)
B 25ms (TYP.) ⑤⑥ Detect Voltage 16 ~ 50 Detect voltage ex.) 4.5V: ⑤ ⇒ 4, ⑥ ⇒ 5
C 50ms (TYP.) Packages MR-G SOT-25 (3,000/Reel)
Release Delay ⑦⑧-⑨(*1)
③ D 100ms (TYP.) (Order Unit) ER-G USP-6C (3,000/Reel)
Time *
E 200ms (TYP.)
F 400ms (TYP.)
H 1.6s (TYP.)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
* Please set the release delay time shorter than or equal to the watchdog timeout period.
ex.) XC6101D427MR or XC6101D327MR
75
14. Voltage Detectors _____________________________________________________________________________
XC6118 Series Voltage Detector with Separated Sense Pin & Delay Capacitor
Example: When 12V (+B: battery voltage) is detected, detection is possible with detection
Cd/NC voltage (VSEN) = 1.0V, R1 = 220kΩ, and R2 = 20kΩ.
VIN = 1V to 6V: This is the IC power supply, so turn on the power at the same time or
before
例:12V(+B:VSEN. It is acceptable if the voltage applied
バッテリー電圧)を検出したい場合、検出電圧(VSEN)=1.0V、 to the VSEN pin is higher than VIN.
R1=220kΩ、R2=20kΩとすれば検出可能。
VIN=(1V~6V):ICの電源となるため、VSENと同時か先に電源投入してください。なお、VSEN端子にかかる電圧はVINより高くても構いません。
+B
VIN
R1 R3 (Not needed on a
(CMOS出力品の場合不要)
CMOS output product)
USP-4 VSEN VOUT VOUT
Added
Power
Supply
Ordering Information
XC6118①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS output
① Output Configuration
N N-ch open drain output
②③ Detect Voltage 08~50 e.g. 18→1.8V
A Built-in delay pin, hysteresis 5% (TYP.)
Output Delay & Hysteresis B Built-in delay pin, hysteresis less than 1%
④
(Options) C No built-in delay pin, hysteresis 5% (TYP.) (Semi-Custom)
D No built-in delay pin, hysteresis less than 1% (Semi-Custom)
GR-G USP-4 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
MR-G SOT-25 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
76
_____________________________________________________________________________________________________ ●
1000
USPN-4
(BOTTOM VIEW) 100
SSOT-24
10
(TOP VIEW)
1
Ordering Information
XC6119①②③④⑤⑥-⑦
77
14. Voltage Detectors _____________________________________________________________________________
Pin Configuration
14. Voltage Detectors
VIN VOUT
VSS
USP-3 SSOT-24
(BOTTOM VIEW) (TOP VIEW)
Ordering Information
XC6120①②③④⑤⑥-⑦
78
_____________________________________________________________________________________________________ ●
XC6121/XC6122/XC6123/XC6124 Series
Voltage Detector with Watchdog Function and ON/OFF Control (VDF=1.6V~5.0V)
Pin Configuration
USP-6C
SOT-25 (BOTTOM VIEW)
(TOP VIEW)
10.0
SS
Supply Current: I
8.0 Ta=25℃
6.0 Ta=-40℃
4.0
2.0
0
0 1 2 3 4 5 6
Input Voltage: V IN (V)
Ordering Information
XC6121①②③④⑤⑥-⑦: EN Pin: No Pull-Up Resistor
XC6122①②③④⑤⑥-⑦: EN Pin: Pull-Up Resistor
XC6123①②③④⑤⑥-⑦: ENB Pin: No Pull-Down Resistor
XC6124①②③④⑤⑥-⑦: ENB Pin: Pull-Down Resistor
DESIGNATOR ITEM SYMBOL DESCRIPTION
A 3.13ms (TYP.)
C 50ms (TYP.)
① Release Delay Time(*1) D 100ms (TYP.)
E 200ms (TYP.)
F 400ms (TYP.)
2 50ms (TYP.)
3 100ms (TYP.)
4 200ms (TYP.)
② Watchdog Timeout Period
5 400ms (TYP.)
6 1.6s (TYP.)
7 800ms (TYP.)
Detect voltage
③④ Detect Voltage 16 ~ 50
ex.) 4.5V: ③⇒ 4, ④⇒ 5
(*2) MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
Please set the release delay time shorter than or equal to the watchdog timeout period.
ex.) XC6121D327MR or XC6121D627MR
(*2)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
79
14. Voltage Detectors _____________________________________________________________________________
Pin Configuration
VIN VOUT
4 3
VSS 4 1 VIN
NC 3 2 VOUT 1 2
NC VSS
USPN-4B02 SSOT-24
(BOTTOM VIEW) (TOP VIEW)
XC6126x27Ax
2.76
Detect Voltage: VDFL (V)
2.74
2.72
2.70
2.68
2.66
2.64
-50 -25 0 25 50 75 100
Ambient Temperature: Ta (℃)
Ordering Information
XC6126①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS Output
① Output Configuration
N N-ch Open Drain Output
②③ Detect Voltage 15~55 e.g. 2.7V →②=2, ③=7
④ Detect Accuracy A ±0.8%
7R-G USPN-4B02 (5,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
NR-G SSOT-24 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
80
_____________________________________________________________________________________________________ ●
XC6127 Series Ultra Small Voltage Detector with High Precision Delay Circuit
and Manual Reset Function
Pin Configuration
RESETB
VIN RESET
RESETB
RESET MRB
5 4
4 3
RESETB
VIN 4 1 RESET
VSS 3 2 MRB
1 2
VIN VSS 1 2 3
MRB VSS NC
RESET INPUT
MRB
VIN
VSS
VSS
110
RESET
SW
105
Vpull-Up 95
VCC
MRB
85
VSS
VIN
VSS -50 -25 0 25 50 75 100
RESET
SW Ambient Temperature: Ta (℃)
Ordering Information
XC6127①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS output
① Output Configuration
N N-ch open drain output
②③ Detect Voltage 15~55 e.g. 2.7V →②=2, ③=7
A Reset Active Low, Release Delay Time: 50ms
B Reset Active Low, Release Delay Time: 100ms
C Reset Active Low, Release Delay Time: 200ms
D Reset Active Low, Release Delay Time: 400ms
E Reset Active Low, Release Delay Time: 800ms
④ Type
F Reset Active High, Release Delay Time: 50ms
G Reset Active High, Release Delay Time: 100ms
H Reset Active High, Release Delay Time: 200ms
J Reset Active High, Release Delay Time: 400ms
K Reset Active High, Release Delay Time: 800ms
7R-G USPN-4 (5,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) MR-G SOT-25 (3,000/Reel)
NR-G SSOT-24 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
81
14. Voltage Detectors _____________________________________________________________________________
Pin Configuration
SSOT-24 USPN-4
(TOP VIEW) (BOTTOM VIEW)
Ordering Information
XC6129①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS output
① Output Configuration
N Nch open drain output
②③ Detect Voltage 15~55 e.g. 1.8V → ②=1, ③=8
A
B
C
D
④ Type E Refer to [Selection Guide]
F
G
J
L
NR-G SSOT-24 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
7R-G USPN-4 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE OUTPUT LOGIC RELEASE DELAY DETECT DELAY HYSTERESIS WIDTH INDEFINITENESS PREVENTION
A 5% (TYP.) Not Available
Yes No
B 5% (TYP.) Available
C 5% (TYP.) Not Available
Reset Active Low No Yes
D 5% (TYP.) Available
E 5% (TYP.) Not Available
Yes Yes
F 5% (TYP.) Available
G Yes No 5% (TYP.)
J Reset Active High No Yes 5% (TYP.) Not Available
L Yes Yes 5% (TYP.)
82
_____________________________________________________________________________________________________ ●
12 WD Function ON
WD Function OFF
Supply Current:ISS(μA)
10
0
XC6130 Series XC6131 Series 0 1 2 3 4 5 6
Input Voltage:VIN(V)
EN/ENB
Ordering Information
XC6130①②③④⑤⑥-⑦ With MRB Pin (Manual Reset)
83
14. Voltage Detectors _____________________________________________________________________________
XC6132 Series Delay capacitor adjustable voltage detectors with sense pin isolation,
surge voltage protection and hysteresis external adjustment
Pin Configuration
●A/B/C/D/L type ●E/F/H/K/M type
Cd/MRB VSS VSEN Cd/MRB VSS VSEN
6 5 4 1 HYS 6 5 4 1 HYS
VSEN 6 VSEN 6
R3 4.0
VIN
R1 HYS 3.5
Rpull(*1)
Output Voltage : VRESET(V)
VSEN 3.0
RESET 2.5
R2 RESETB
2.0
Cd/MRB
RESET Cd 1.5
SW VSS
GND 1.0
0.5
0.0
0 1 2 3 4 5 6 7 8 9 10
Battery (+B) voltage monitoring: Detects high voltage via R1/R2 resistance division.
A hysteresis width can be added as desired by connecting R3 between the VSEN Voltage Sense : VSEN(V)
Ordering Information
XC6132①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS output
① Output Configuration
N N-ch open drain output
②③ Detect Voltage 08~20 e.g. 1.0V → ②=1, ③=0
④ TYPE A~M Refer to Selection Guide
MR-G SOT-26 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE RESET/RESETB OUTPUT DELAY(Rp:Rn) HYSTERESIS
A Active High(*2) 1:0 144kΩ:0Ω 0.1%(TYP.)
B ↑ 1:0.125 144kΩ:18kΩ ↑
C ↑ 1:1 144kΩ:144kΩ ↑
D ↑ 2:1 288kΩ:144kΩ ↑
L ↑ 0.076:1 11kΩ:144kΩ ↑
E Active Low(*2) 1:0 144kΩ:0Ω ↑
F ↑ 1:0.125 144kΩ:18kΩ ↑
H ↑ 1:1 144kΩ:144kΩ ↑
K ↑ 2:1 288kΩ:144kΩ ↑
M ↑ 0.076:1 11kΩ:144kΩ ↑
(*2)
”Active High” is H level when detection occurs, and “Active Low” is L level when detection occurs.
84
_____________________________________________________________________________________________________ ●
XC6133 Series Capacitor delay type voltage detectors with sense pin isolation
Pin Configuration
●Type A/B/C/D/L ●Type E/F/H/K/M
Cd/MRB VSS VSEN Cd/MRB VSS VSEN
6 5 4 1 NC 6 5 4 1 NC
VSEN 6 VSEN 6
VDD1 21.0
20.8
VDD 20.6
Release Delay Time : tDR (ms)
VIN 20.4
VR or DCDC VSEN Rpull(*1)
µP
20.2
19.2
19.0
-50 -25 0 25 50 75 100 125 150
Ordering Information
XC6133①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Output Configuration C CMOS output
N Nch open drain output
②③ Detect Voltage 10~50 e.g. 1.0V → ②=1, ③=0
④ TYPE A~M Refer to [Selection Guide]
MR-G SOT-26 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE RESET/RESETB OUTPUT DELAY (Rp:Rn) HYSTERESIS
A Active High(*2) 1:0 144kΩ:0Ω 5.0%(TYP.)
B ↑ 1:0.125 144kΩ:18kΩ ↑
C ↑ 1:1 144kΩ:144kΩ ↑
D ↑ 2:1 288kΩ:144kΩ ↑
L ↑ 0.076:1 11kΩ:144kΩ ↑
E Active Low(*2) 1:0 144kΩ:0Ω ↑
F ↑ 1:0.125 144kΩ:18kΩ ↑
H ↑ 1:1 144kΩ:144kΩ ↑
K ↑ 2:1 288kΩ:144kΩ ↑
M ↑ 0.076:1 11kΩ:144kΩ ↑
(*2)
”Active High” is H level when detection occurs, and “Active Low” is L level when detection occurs.
85
14. Voltage Detectors _____________________________________________________________________________________ ●
XC6134 Series Delay capacitor adjustable voltage detectors with sense pin isolation and
Hysteresis external adjustment
can be used to establish a sufficient hysteresis width. Manual Reset Function: Yes
Output Type: CMOS or Nch open drain
Output Logic: H level or L level at detection
Delay Capacitance Pin: Release delay / detection delay can
be set in 5 time ratio options
Packages: USP-6C,SOT-26
Environmentally Friendly: EU RoHS compliant, Pb free
Pin Configuration
●Type A/B/C/D/L ●Type E/F/H/K/M
Cd/MRB VSS VSEN Cd/MRB VSS VSEN
6 5 4 1 HYS 6 5 4 1 HYS
VSEN 6 VSEN 6
R3 4.0
VIN
R1 HYS
Rpull(*1) 3.5
VSEN
R3=0Ω
Output Voltage : VRESET(V)
RESET 3.0
R2 RESETB R3=330kΩ
2.5
R3=110kΩ
Cd/MRB
RESET Cd 2.0
SW VSS
GND
1.5
1.0
Ordering Information
XC6134①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
C CMOS output
① Output Configuration
N Nch open drain output
②③ Detect Voltage 08~50 e.g. 1.0V → ②=1, ③=0
④ Type A~M Refer to [Selection Guide]
(*1) MR-G SOT-26 (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE RESET/RESETB OUTPUT DELAY (Rp:Rn) HYSTERESIS
A Active High(*2) 1:0 144kΩ:0Ω 0.1%(TYP.)
B ↑ 1:0.125 144kΩ:18kΩ ↑
C ↑ 1:1 144kΩ:144kΩ ↑
D ↑ 2:1 288kΩ:144kΩ ↑
L ↑ 0.076:1 11kΩ:144kΩ ↑
E Active Low(*2) 1:0 144kΩ:0Ω ↑
F ↑ 1:0.125 144kΩ:18kΩ ↑
H ↑ 1:1 144kΩ:144kΩ ↑
K ↑ 2:1 288kΩ:144kΩ ↑
M ↑ 0.076:1 11kΩ:144kΩ ↑
(*2)
”Active High” is H level when detection occurs, and “Active Low” is L level when detection occurs.
86
● ________________________________________________________________________________________________ 15. Reboot IC
15. Reboot IC
Pin Configuration
●XC6190AN15xx / XC6190AC15xx ●XC6190BN25xx / XC6190BC25xx
5. RT 2. VSS 5. TS 2. VSS
5. RT 2. VSS 5. TS 2. VSS
Button1 Button1
RT TS
Button2 VSS Button2 VSS
RT
Ordering Information
XC6190①②③④⑤⑥-⑦
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
A Reboot delay time set by the external resistance
① TYPE
B Reboot delay time internal fix.
N Nch open drain output
② Output Configuration
C CMOS output
1 Type A : 12.5s (RT=200kΩ)
③ Reboot delay time
2 Type B : 7.5s(VTS=”L”), 12.5s(VTS=”H”)
④ Reboot delay time accuracy 5 ±5%
(*1) 7R-G USPN-6 (5,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
8R-G USPN-6B01 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
87
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
VOUT
(Tab)
2
2
VOUT
1 3
VSS/ADJ VIN
TO-252
(TOP VIEW)
(Tantalum) 3.00
2.50
XB1085K Series 2.00
VIN VOUT IOUT 1.50 Ta=85℃
VIN ADJ CL=22uF 1.00 Ta=25℃
R1
CIN=10uF (Tantalum) Ta=0℃
(Tantalum) 0.50
R2 0.00
VOUT=VREF×(1+R2/R1) + IADJ×R2 0 600 1200 1800 2400 3000
Output Current: IOUT (mA)
Ordering Information
XB1085①②③④⑤⑥-⑦
DESIGNATOR ITEM SYNBOL DESCRIPTION
P Fixed VOUT
① Type of Regulators
K Adjustable (Externally Set)
151 VOUT=1.5V (±1.0%)
181 VOUT=1.8V (±1.0%)
Output Voltage
251 VOUT=2.5V (±1.0%)
(Output Voltage Accuracy)
②③④ 331 VOUT=3.3V (±1.0%)
501 VOUT=5.0V (±1.0%)
Output Voltage Externally Set
12B ADJ, VOUT=1.25V (±1.0%)
(Output Voltage Accuracy)
(*1)
⑤⑥-⑦ Package (Order Unit) JR-G TO-252 (2,500/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
88
_____________________________________________________________________________________________________ ●
2
VOUT
1 3
VSS/
VIN
ADJ
TO-252
(TOP VIEW)
(Tantalum)
3.0
2.5
2.0
XB1086K Series 1.5 Ta=85℃
VIN VOUT IOUT 1.0 Ta=25℃
Ta=0℃
VIN ADJ CL=22uF 0.5
R1 (Tantalum)
CIN=10uF
(Tantalum) 0.0
0 300 600 900 1200 1500
R2 Output Current: IOUT (mA)
VOUT=VREF×(1+R2/R1) + IADJ×R2
Ordering Information
XB1086①②③④⑤⑥-⑦
DESIGNATOR ITEM SYNBOL DESCRIPTION
P Fixed VOUT
① Type of Regulators
K Adjustable (Externally Set)
151 VOUT=1.5V (±1.0%)
181 VOUT=1.8V (±1.0%)
Output Voltage
251 VOUT=2.5V (±1.0%)
(Output Voltage Accuracy)
②③④ 331 VOUT=3.3V (±1.0%)
501 VOUT=5.1V (±1.0%)
Output Voltage Externally Set
12B ADJ, VOUT=1.25V (±1.0%)
(Output Voltage Accuracy)
(*1)
⑤⑥-⑦ Package (Order Unit) JR-G TO-252 (2,500/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
89
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
16. Voltage Regulators Single Type
VOUT
1 2 3
SOT-223
(TOP VIEW)
Ordering Information
XB1117①②③④⑤⑥-⑦
90
_____________________________________________________________________________________________________ ●
Pin Configuration
SOT-89
(TOP VIEW)
XC62FJ3302PR-G
3.0
Consumption Current: ISS(uA)
2.5
2.0
1.5
1.0 Ta=-40℃
Ta=25℃
0.5
Ta=85℃
0.0
0 2 4 6 8 10
Input Voltage: VIN(V)
Ordering Information
XC62FJ①②③④⑤⑥-⑦
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
①② Output Voltage 17~60 e.g. 30: 3.0V, 50: 5.0V
③④ Output Voltage Accuracy 02 ±2.0%
⑤⑥-⑦(*1) Package (Order Unit) PR-G SOT-89 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
91
16. Voltage Regulators Single Type ____________________________________________________________
SOT-89
16. Voltage Regulators Single Type
SOT-25
(TOP VIEW)
<SOT-23-5>
(TOP VIEW)
1 2 3 1 2 3
VIN VSS NC VOUT VSS VIN
NC 6 1 VIN
VSS 5 2 NC
NC 4 3 VOUT
Typical Performance Characteristics
USP-6B
(BOTTOM
(BOTTOM VIEW)
VIEW)
1 2 3
VO U T VS S V IN
(T Type)
V SS TO-92
V O U T V IN
(L T ype)
(SIDE VIEW)
Block Diagram
Ordering Information
XC6201P①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
e.g. 30:3.0V
①② Output Voltage 13 ~ 60
50:5.0V
1 ± 1.0% (VOUT ≧2.0V)
③ Output Voltage Accuracy
2 ± 2.0%
MR-G SOT-25 (3,000/Reel)
PR-G SOT-89 (1,000/Reel)
④⑤-⑥(*1) Packages (Order Unit) TH-G TO-92, Paper type (2,000/Tape)
TB-G TO-92, Bag (500/Bag)
DR-G USP-6B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
92
_____________________________________________________________________________________________________ ●
Pin Configuration
1 2 1 2 3
VSS VOUT VSS VIN VOUT
SOT-23
(TOP VIEW) SOT-89 1 2 3
(TOP VIEW) VSS VIN VOUT
(T Type)
V TO-92
V V
(SIDE VIEW)
Ordering Information
XC6203①②③④⑤⑥-⑦
93
16. Voltage Regulators Single Type ____________________________________________________________
XC6204/XC6205 Series 300mA High Speed LDO Regulators Output ON/OFF Control
Pin Configuration
VOUT VSS VIN CE VSS VIN
5 4
53 2 1
CE 6 1 VIN
VSS 5 2 NC
NC 4 3 VOUT
1 2 3 4 5
NC VSS CE NC VOUT USP-6B
USP-6B
SOT-89-5 SOT-25 (BOTTOM VIEW)
(BOTTOM VIEW)
(TOP VIEW) (TOP VIEW)
Ordering Information
XC6204/6205①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A/E Active High, pull-down resistor built-in (Semi-Custom)
Type of Regulator B/F Active High, no pull-down resistor built-in
① (*2)
(CE pin Logic) C/G Active Low, pull-up resistor built-in (Semi-Custom)
D/H Active Low, no pull-up resistor built-in (Semi-Custom)
②③ Output Voltage 09~60, e.g. VOUT=2.0V→②=2, ③=0
0.1V increments, ±2.0% accuracy
2
e.g. VOUT=3.8V, ±2.0%→②=3, ③=8, ④=2
(*3) 0.1V increments, ±1.0% accuracy
1
e.g. VOUT=3.0V, ±1.0%→②=3, ③=0, ④=1
④ Output Voltage Accuracy
0.05V increments, ±2.0% accuracy
A
e.g. VOUT=3.85V, ±2.0%→②=3, ③=8, ④=A
(*3) 0.05V increments, ±1.0% accuracy
B
e.g. VOUT=3.05V, ±1.0%→②=3, ③=0, ④=B
MR-G SOT-25 (3,000/Reel)
(*1)
⑤⑥-⑦ Packages (Order Unit) DR-G USP-6B (3,000/Reel)
PR-G SOT-89-5 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
E to H types are compatible to 300mA of XC6204 series.
(*3)
Output voltage range of the +1% accuracy product is 2.95V to 6.0V.
94
_____________________________________________________________________________________________________ ●
Pin Configuration
VIN
NC 5 2 VSS
VIN 4 3 NC
SOT-23 1 2 3 USP-6B
(TOP VIEW) (BOTTOM VIEW)
VSS VIN VOUT
1 2 3
SOT-89
VSS VI N VOUT
(TOP VIEW)
TO-92
(SIDE VIEW)
Ordering Information
XC6206P①②③④⑤-⑥
95
16. Voltage Regulators Single Type ____________________________________________________________
XC6209 Series 300mA High Speed LDO Regulators with ON/OFF Control
VOUT VIN
5 4
CE 6 1 VIN
VSS5 2 NC
NC 4 3 VOUT
1 2 3 USP-6B
NC VSS CE SOT-25 (BOTTOM VIEW)
SOT-89-5 (TOP VIEW)
(TOP VIEW)
Ordering Information
XC6209①②③④⑤⑥-⑦
96
_____________________________________________________________________________________________________ ●
1 2 3
VIN VSS CE 1 2 3
CE VSS NC USP-6B
SOT-25 (TOP VIEW) SOT-89-5 (TOP VIEW) (BOTTOM VIEW)
Ordering Information
XC6210①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Active High with pull-down resistance
B Active High with no pull-down resistance
① CE pin functions
C Active Low with pull-up resistance
D Active Low with no pull-up resistance
②③ Output Voltage 08~50 ex.) 3.0V → ①=3, ②=0
0.1V increments, ±2.0% (VOUT≦1.5V→less than ±30mV) ex.) 2.80V
2
→②=2, ③=8, ④=2
④ Output Voltage Accuracy
0.05V increments, ±2.0% (VOUT≦1.5V→less than ±30mV) ex.) 2.85V
A
→②=2, ③=8, ④=A
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) PR-G SOT-89-5 (1,000/Reel)
DR-G USP-6B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
97
16. Voltage Regulators Single Type ____________________________________________________________
XC6213 Series 150mA High Speed LDO Regulators, Ultra Small Package
●SSOT-24
VIN VOUT
CE VSS
CIN CL
1μF 1μF
80 0.1V increments
2
Rate: :PSRR
10
0
0.01 0.1 1 10 100
Ripple Frequency : f (KHz)
98
_____________________________________________________________________________________________________ ●
VIN VOUT
VIN RL
CIN VSS CL
1.0uF 1.0uF
Ordering Information
XC6214P①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
12 1.2V
15 1.5V
18 1.8V
①② Output Voltage
25 2.5V
30 3.0V
33 3.3V
③ Output Voltage Accuracy 2 ±2.0%
(*1) JR-G TO-252 (2,500/Reel)
④⑤-⑥ Packages (Order Unit)
PR-G SOT-89 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
99
16. Voltage Regulators Single Type ____________________________________________________________
XC6215 Series 0.8μA Low Quiescent Current Voltage Regulator with ON/OFF
Control
Pin Configuration
VSS
3
VOUT 2
VIN 1
3
VSS
USPN-4 USP-3 USP-4
(BOTTOM VIEW) (BOTTOM VIEW) (BOTTOM VIEW)
SSOT-24 SOT-25
(TOP VIEW) (TOP VIEW)
VOUT
VIN VOUT
CE
VSS CL=0.1uF
CIN=1.0uF (ceramic)
(ceramic)
Ordering Information
XC6215①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
B CE logic= Active High with pull-down registor
① Type of Regulator
P 3 pin regulator with no CE pin(USP-3 only)
0.9V~5.0V, 0.1V step
②③ Output Voltage 09~50
e.g. VOUT=3.0V→②3, ③→0
④ Output Voltage Accuracy 2 ±2.0%
GR-G USP-4 (3,000/Reel)
NR-G SSOT-24 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) HR-G USP-3(for XC6215P type only) (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
7R-G USPN-4 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
100
_____________________________________________________________________________________________________ ●
XC6216 Series 150mA Voltage Regulators with ON/OFF Control - Input Voltage: 28V
Pin Configuration
V IN V OUT
CIN CE CL
1uF V SS 1uF
Ordering Information
XC6216①②③④⑤⑥-⑦: CE function (Active High) Fixed output voltage 2.0V~12.0V (0.1V increments)
DESIGNATOR ITEM SYMBOL DESCRIPTION
B Fixed output voltage, 2.0V~12.0V(0.1V increments)
① Type and Options of Regulators
C Output voltage externally set (VOFB=2.0V)
For the voltage within 2.0V ~9.9V (0.1V increments);
e.g. 2.5V ⇒ 25, 5.0V ⇒ 50
20 ~ C0
②③ Output Voltage For the voltage within 10.0V~12.0V (0.1V increments);
e.g. 10.6V ⇒ A6, 11.2V ⇒ B2, 12.0V ⇒ C0
20 For C type (output voltage externally set), VOFB=2.0V only
2 ±2.0%
④ Output Voltage Accuracy (*2)
1 ±1.0%
MR-G SOT-25 (3,000/Reel)
(*1)
⑤⑥-⑦ Packages (Order Unit) PR-G SOT-89-5 (1,000/Reel)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For the C type, the accuracy is based on VOFB voltage. The actual output voltage accuracy is depended on the external resistances.
XC6216D①②③④⑤-⑥: 3 pin regulator (No CE function), Fixed output voltage 2.0V~12.0V (0.1V increments)
DESIGNATOR ITEM SYMBOL DESCRIPTION
For the voltage within 2.0V~9.9V (0.1V increments);
e.g. 2.5V ⇒ 25, 5.0V ⇒ 50
①② Output Voltage 20 ~ C0
For the voltage within10.0V~12.0V (0.1V increments);
e.g. 10.6V ⇒ A6, 11.2V ⇒ B2, 12.0V ⇒ C0
2 ±2.0%
③ Output Voltage Accuracy
1 ±1.0%
PR-G SOT-89 (1,000/Reel)
(*1)
④⑤-⑥ Packages (Order Unit) FR-G SOT-223 (1,000/Reel)
JR-G TO-252 (2,500/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
101
16. Voltage Regulators Single Type ____________________________________________________________
*GreenOperation-compatible
XC6217 Series 200mA High Speed "Green Operation" LDO Voltage Regulators
Pin Configuration
VOUT GO VIN VOUT
5 4 4 3
VSS 2 3 CE
GO 2 3 CE
5
VSS
VOUT 1 4 VIN V OUT1 4 VIN
1 2 USP-4D USPN-4
1 2 3 CE VSS
(BOTTOM VIEW) (BOTTOM VIEW)
VIN VSS CE SSOT-24
SOT-25 (TOP VIEW)
(TOP VIEW)
VIN VOUT
Input Input
CL
CE GO
1uF
CIN VSS
(Ceramic)
1uF
(Ceramic)
Ordering Information
XC6217①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A CE Active High, no CL discharge resistor
B CE Active High, with CL discharge resistor
① Type of Regulator
C CE Active High, no CL discharge resistor, no GO pin (SSOT-24)
D CE Active High, with CL discharge resistor, no GO pin (SSOT-24)
②③ Output Voltage 08 ~ 40 ex.) VOUT(T) = 3.0V → ② = 3, ③ = 0
2 ±2.0%, 0.1V increments ex.) 2.8V → ② = 2, ③ = 8, ④ = 2
A ±2.0%, 0.05V increments ex.) 2.85V → ② = 2, ③ = 8, ④ = A
④ Output Voltage Accuracy
1 ±1.0%, 0.1V increments ex.) 2.8V → ② = 2, ③ = 8, ④ = 1
B ±1.0%, 0.05V increments ex.) 2.85V → ② = 2, ③ = 8, ④ = B
GR-G USP-4D (XC6217A/B type) (3,000/Reel)
(*1) MR-G SOT-25 (XC6217A/B type) (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
NR-G SSOT-24 (XC6217C/D type) (3,000/Reel)
7R-G USPN-4 (XC6217C/D type)(*2) (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
Output Range of USPN-4 is 1.6V≦VOUT≦4.00V
102
_____________________________________________________________________________________________________ ●
Pin Configuration
Ordering Information
XC6218P①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
Output voltage
“②” represents value after the decimal point.
①② Output Voltage 09~40
Ex.) 15 ⇒ ①:1, ②: 5 = 1.5V
33 ⇒ ①:3, ②: 3 = 3.3V
Output Voltage
③ 2 ±2.0%
Accuracy
HR-G USP-3 (3,000/Reel)
④⑤-⑥(*1) Packages (Order Unit)
NR-G SSOT-24 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
103
16. Voltage Regulators Single Type ____________________________________________________________
XC6219 Series 300mA High Speed LDO Regulator with ON/OFF Control
1 VIN VOUT 5
CL
2 VSS 1μF
3 CE NC 4
CIN
1μF
SOT-25
Ordering Information
XC6219①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
(*4)
A 150mA, Active High, pull-down resistor built in (Semi-custom)
B 150mA, Active High, no pull-down resistor built in (Standard)
C 150mA, Active Low, pull-up resistor built in(*4) (Semi-custom)
D 150mA, Active Low, no pull-up resistor built in (Semi-custom)
① CE Pin Logic
E 300mA, Active High, pull-down resistor built in(*4) (Semi-custom)
F 300mA, Active High, no pull-down resistor built in (Standard)
G 300mA, Active Low, pull-up resistor built in(*4) (Semi-custom)
H 300mA, Active Low, no pull-up resistor built in (Semi-custom)
②③ Output Voltage 09~50 e.g. ②=3, ③=0, → 3.0V
(*3) 0.1V increments, ±2.0% accuracy
2
e.g. ③=2, ③=8, ④=2 → 2.80V, ±2%
0.1V increments, ±1.0% accuracy
1 (*2)
e.g. ②=3, ③=0, ④=1 → 3.00V, ±1%
Output Voltage
④ 0.05V increments, ±2.0% accuracy
Accuracy
A (*3)
e.g. ②=2, ③=8, ④=A → 2.85V, ±2%
0.05V increments, ±1.0% accuracy
B (*2)
e.g. ②=3, ③=0, ④=B → 3.05V, ±1%
MR-G SOT-25 (3,000/Reel)
Packages
⑤⑥-⑦(*1) PR-G SOT-89-5 (for XC6219 only) (1,000/Reel)
(Order Unit)
DR-G USP-6B (for XC6219 only) (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
Output voltage of the ±1% accuracy product is 3.0V or more.
(*3)
Output voltage accuracy of the VOUT≦1.5V is ±30mV.
(*4)
With the pull-up resistor or pull-down resistor built-in types, the quiescent current during operation will increase by VIN / 2.0MΩ (TYP.)
104
_____________________________________________________________________________________________________ ●
SOP-8FD
(TOP VIEW)
400 Topr=-40℃
Topr=85℃
300
200
100
0
0 200 400 600 800 1000
Output Current: IOUT (mA)
Ordering Information
XC6220①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A without CE Pull-down resistor, without CL discharge (Semi-custom)
B without CE Pull-down resistor, with CL discharge (Standard)
① Type
C with CE Pull-down resistor, without CL discharge (Semi-custom)
D with CE Pull-down resistor, with CL discharge (Semi-custom)
②③ Output Voltage 08~50 e.g. 3.0V → ①=3, ②=0
Output Voltage Type 1 Output voltage {○.○0v} (the 2nd decimal place is “0”)
④ nd nd
(The 2 Decimal Place) B Output voltage {○.○5v} (the 2 decimal place is “5”)
MR-G SOT-25 (3,000/Reel)
Packages PR-G SOT-89-5 (1,000/Reel)
⑤⑥-⑦(*1)
(Order Unit) ER-G USP-6C (3,000/Reel)
QR-G SOP-8FD(1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
105
16. Voltage Regulators Single Type ____________________________________________________________
XC6221 Series 200mA High Speed LDO Voltage Regulators with ON/OFF Control
V SS 2 3 CE
V OUT 1 4 VIN
USPN-4
USP-4 (BOTTOM VIEW)
(BOTTOM VIEW) SOT-25 SSOT-24
(TOP VIEW) (TOP VIEW)
Ordering Information
XC6221①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A No CE pull-down resistor without CL auto discharge
B No CE pull-down resistor with CL auto discharge
① Type
C CE pull-down resistor without CL auto discharge
D CE pull-down resistor with CL auto discharge
②③ Output Voltage 08 ~ 50 ex.) VOUT = 3.00V →② = 3, ③ = 0
±30mV @ 0.80V≦VOUT≦1.40V
When 0.1V steps such as VOUT=0.80V →②=0, ③=8, ④=2
2
±2.0% @ VOUT>1.50V
When 0.1V steps such as VOUT=1.50V →②=1, ③=5, ④=2
±30mV @ 0.85V≦VOUT≦1.45V
When 0.05V steps such as VOUT=0.85V →②=0, ③=8, ④=A
A
±2.0% @ VOUT>1.55V
When 0.05V steps such as VOUT=1.55V →②=1, ③=5, ④=A
④ Output Voltage Accuracy
±20mV @ 0.80V≦VOUT≦1.90V
When 0.1V steps such as VOUT=0.80V →②=0, ③=8, ④=1
1
±1.0% @ VOUT>2.00V
When 0.1V steps such as VOUT=2.00V →②=2, ③=0, ④=1
±20mV @ 0.85V≦VOUT≦1.95V
When 0.05V steps such as VOUT=0.85V →②=0, ③=8, ④=B
B
±1.0% @ VOUT>2.00V
When 0.05V steps such as VOUT=2.05V →②=2, ③=0, ④=B
GR-G USP-4 (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
NR-G SSOT-24 (3,000/Reel)
7R-G USPN-4 (5,000/Reel)
* For the USPN-4 package, 0.80V≦VOUT≦1.15V is under development.
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
106
_____________________________________________________________________________________________________ ●
1.6 1000
Output Current:IOUT(mA)
Output Voltage
Output Voltage:VOUT(V)
1.5 800
1.4 600
*CL: 2.2μF or higher (VOUT=2.5~5.0V)
1.3 Output Current 400 4.7μF or higher (VOUT=2.1~2.45V)
1.2 200
6.8μF or higher (VOUT=0.8~2.05V)
1.1 0
Time:100μs/div
Ordering Information
XC6222①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A without CE Pull-down resistor, without CL discharge (semi-custom)
B without CE Pull-down resistor , with CL discharge (semi-custom)
① Type
C with CE Pull-down resistor, without CL discharge (semi-custom)
D with CE Pull-down resistor, with CL discharge (standard)
e.g. 2.8V → ②=2, ③=8
②③ Output Voltage 08~50
Output Voltage Range : 0.8~5.0 V (0.05V increments)
Output voltage {x.x0v} (the 2nd decimal place is “0”)
1
Output Voltage Type ±1.0% (VOUT>2.0V), ±0.02V(VOUT≦2.0V)
④
(The 2nd Decimal Place) Output voltage {x.x5v} (the 2nd decimal place is “5”)
B
±1.0% (VOUT>2.0V), ±0.02V(VOUT≦2.0V)
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) PR-G SOT-89-5 (1,000/Reel)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
107
16. Voltage Regulators Single Type ____________________________________________________________
XC6223 Series 300mA High Speed LDO Voltage Regulator with Built-in Inrush
Current Protection
Pin Configuration
VOUT VIN
5 2 4
VOUT N.C.
5 4
1 2 3 1 2 3
2.50 300
Output Voltage
2.45 250
2.40 200
2.35 150
Output Current
2.30 100
2.25 50
2.20 0
Time [20μs/div]
Ordering Information
XC6223①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Inrush Current Protection CE Pull-Down Resistor CL Discharge
A/J* NO NO NO
B/K* NO NO YES
C/M* NO YES (1MΩ, TYP built-in) NO
D/N NO YES (1MΩ, TYP built-in) YES
① Type
E/P* YES NO NO
F/Q* YES NO YES
G/R* YES YES (1MΩ, TYP built-in) NO
H/T
YES YES (1MΩ, TYP built-in) YES
(The Recommended Type)
②③ Output Voltage 12~40 ex.) 2.80V →②=2, ③=8, ④=please see down below.
±1% (VOUT≧2.0V), ±0.02V (VOUT<2.0V)
1 nd
Output Voltage In case the 2 decimal place of output voltage is “0” → ex.) 2.80V
④
Accuracy ±1% (VOUT≧2.0V), ±0.02V (VOUT<2.0V)
B nd
In case the 2 decimal place of output voltage is “5” → ex.) 2.85V
9R-G USPQ-4B03 (5,000/Reel)
NR-G SSOT-24 (3,000/Reel)
Packages
⑤⑥-⑦(*1) MR-G SOT-25 (3,000/Reel)
(Order Unit)
PR-G SOT-89-5 (1,000/Reel)
GR-G USP-4 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
* semi-custom
108
_____________________________________________________________________________________________________ ●
450 1.35
400 1.30
Output Current:IOUT [mA]
250 1.15
200 1.10
150 1.05
Output Current
100 1.00
50 0.95
0 0.90
Time [10µs/div]
Ordering Information
XC6224①②③④⑤⑥-⑦ CE Active High, with CL Discharge, ±1% Accuracy
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
Without CE pull-down
① Type of Regulator (The Recommended Type)
B With CE pull-down
②③ Output Voltage 08~30 e.g.) 2.5V → ②=2 ③=5
Output Voltage Type 1 {x.x0V} (the 2nd decimal place is “0”)
④
(The 2nd Decimal Place) B {x.x5V} (the 2nd decimal place is “5”)
7R-G USPN-4B02 (5,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) MR-G SOT-25 (3,000/Reel)
NR-G SSOT-24 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
109
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
Ordering Information
XC6225①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Without CL discharge function
① Type
B With CL discharge function
②③ Output Voltage 08~50 e.g. 3.0V → ①=3, ②=0
2 Output voltage is { x.x0V } (the 2nd decimal place is “0”)
④ Output Voltage Accuracy
A Output voltage is { x.x5V } (the 2nd decimal place is “5”)
GR-G USP-4 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) MR-G SOT-25 (3,000/Reel)
NR-G SSOT-24 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
110
_____________________________________________________________________________________________________ ●
XC6227 Series 700mA High Speed LDO Regulator with Reverse Current Protection
8 25℃
85℃
6
-2
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Input Voltage:VIN(V)
Ordering Information
XC6227①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Type of CE (*2) C with CE Active High, with CE Pull-down resistor
②③ Output Voltage 08~50 e.g.) 2.8V → ②=2 ③=8
Output Voltage 1 Output voltage {x.x0V} e.g. 2.80V →②=2, ③=8, ④=1
④ nd
(the 2 decimal place) B Output voltage {x.x5V} e.g. 2.85V →②=2, ③=8, ④=B
MR-G SOT-25 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) PR-G SOT-89-5 (1,000/Reel)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For without CE Pull-down, please contact your local Torex sales office or representative.
111
16. Voltage Regulators Single Type ____________________________________________________________
XC6229 Series 300mA Ultra Small High Speed LDO Regulator with
Built-in Inrush Current Protection
Pin Configuration
2.50 300
Output Voltage
2.45 250
2.40 200
2.35 150
2.30 Output Current 100
2.25 50
2.20 0
Time [20μs/div]
Ordering Information
XC6229①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
CE Active High
D Without Inrush Current Protection
With CE Pull-down, With CL discharge
① Type of Regulator
CE Active High
H With Inrush Current Protection
With CE Pull-down, With CL discharge
②③ Output Voltage 12~40 ex.) 2.80V → ②=2, ③=8, ④=please see down below.
Output Voltage 1 ±1.0%, In case of 2nd decimal place 0 (ex.2.80V → ④=1)
④
(2nd decimal place) B ±1.0%, In case of 2nd decimal place 5 (ex.2.85V → ④=B)
Package
⑤⑥-⑦(*1) 1R-G LGA-4B01 (5,000 /Reel)
(Order Unit)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
112
_____________________________________________________________________________________________________ ●
Pin Configuration
Ordering Information
XC6231A①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
①② Output Voltage 09~55 0.9V~5.5V (0.1V step)
③ Output Voltage Accuracy 2 ±2%
④⑤-⑥(*1) Package (Order Unit) PR-G SOT-89-5 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
113
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
2.0 200
Rush Current : IRUSH (mA)
1.0 150
Output Voltage
Voltage : (V)
0.0 100
-1.0 50
-2.0 0
Rush Current
-3.0 -50
Time (40μs/div)
Ordering Information
XC6233①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Type of Regulator
① H With Inrush Current Protection, With CE Pull-down, With CL discharge
CE Active High
②③ Output Voltage 12~36 ex.)2.80V → ②=2, ③=8 ④= please see down below
0.10V increments
1 ±1.0% (VOUT≧2.00V), ±0.02V (VOUT<2.00V)
Output Voltage e.g. 2.80V → ④=1
④
Accuracy 0.05V increments
B ±1.0% (VOUT≧2.05V), ±0.02V (VOUT<2.05V)
e.g. 2.85V → ④=B
9R-G USPQ-4B04 (3,000/Reel)
Packages GR-G USP-4 (3,000/Reel)
⑤⑥-⑦(*1)
(Order Unit) NR-G SSOT-24 (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
For another type of regulators, please contact your local Torex sales office or representative.
114
_____________________________________________________________________________________________________ ●
1 2
CE VSS 1 2 3
VIN VSS CE
XC6501 Series
Ta=25℃,tr=tf=5μs
CIN=0.1μF (ceramic)
3.2 300
Without
CL無しCL CL=1.0μF
3.0 250
2.8 200
Output Voltage: V
2.6 150
2.4 100
Output Current
2.2 50
2.0 0
Time (40μs/div)
Ordering Information
XC6501①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Without CE Pull-down, Without CL discharge
B Without CE Pull-down, With CL discharge
① Regulator Type C* With CE Pull-down, Without CL discharge
D With CE Pull-down, With CL discharge
P 3 pin, without CE pin (USP-3)
②③ Output Voltage 12 ~ 50 ex.)28V → ②=2, ③=8
0.1V increments ex.)1.80V → ②=1, ③=8, ④=1
1 ±0.02V @ 1.2V ~ 1.9V
±1.0% @ 2.0 ~ 5.0V
④ Output Voltage Accuracy
0.05V increments ex.)1.85V → ②=1, ③=8, ④=A
A ±0.02V @ 1.25V ~ 1.95V
±1.0% @ 2.05 ~ 4.95V
HR-G USP-3 (Only XC6501P) (3,000/Reel)
GR-G USP-4 (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) NR-G SSOT-24 (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
7R-G USPN-4 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
* semi-custom
115
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
16. Voltage Regulators Single Type
CL:0.1μF(ceramic) OutputVoltage
150 2.5
OutputCurrent
100 2.2
50 1.9
0 1.6
Time : 40μs/div
Ordering Information
XC6503D with ON/OFF function XC6503P 3-Terminal regulator
XC6503①②③④⑤⑥-⑦ XC6503①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION DESIGNATOR ITEM SYMBOL DESCRIPTION
CE Active High, with CE Pull-down, ① Type of Regulator P 3-Terminal regulator, without CE pin
① Type of Regulator (*2) D
CL discharge ②③ Output Voltage (*2) 12~50 e.g) ②=2、③=8 → 2.8V
②③ Output Voltage (*3) 12~50 e.g) ②=2、③=8 → 2.8V Output Voltage
④ 1 ±0.02V (1.2~1.9V) ,±1.0% (2.0~5.0V)
Output Voltage Accuracy
④ 1 ±0.02V (1.2~1.9V), ±1.0% (2.0~5.0V)
Accuracy Packages
⑤⑥-⑦(*1) PR-G SOT-89 (1,000/Reel)
GR-G USP-4 (3,000/Reel) (Order Unit)
(*1) Packages
⑤⑥-⑦ MR-G SOT-25 (3,000/Reel) (*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully
(Order Unit)
PR-G SOT-89-5 (1,000/Reel) RoHS compliant.
(*1) (*2)
The “-G” suffix denotes Halogen and Antimony free as well as being fully For the output voltage in 0.05V increments, please contact your local Torex
EU RoHS compliant. sales office or representative.
(*2)
For without CE Pull-down or without CL discharge function, please contact
your local Torex sales office or representative.
(*3)
For the output voltage in 0.05V increments, please contact your local Torex
sales office or representative.
116
_____________________________________________________________________________________________________ ●
XC6504 Series 0.6μA Ultra Low Quiescent Current Small Voltage Regulator
(CL Capacitor-Less)
Pin Configuration
*Under Development
1.2 Ta=-40℃
Ta=25℃
Supply Current: ISS [μA]
1.0
Ta=85℃
0.8
0.6
0.4
0.2
0.0
0 1 2 3 4 5 6
Input Voltage: VIN [V]
Ordering Information
XC6504①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Type A With Current limiter, CE pull-down resistor, CL Auto discharge
②③ Output Voltage 11~50 e.g. 1.8V → ②=1, ③=8
④ Output Voltage Accuracy 1 ±0.02V (VOUT<2.0V), ±1.0% (VOUT≧2.0V)
9R-G USPQ-4B04 (Under development)
7R-G USPN-4B02 (5,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
NR-G SSOT-24 (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
117
16. Voltage Regulators Single Type ____________________________________________________________
XC6505 Series Low Quiescent Current, 200mA High Speed LDO Regulator -
10.5V Input
Pin Configuration
3.5 250
Output Voltage
3.3 200
3.1 150
Output Current
2.9 100
2.7 100mA 50
⇔
1mA
2.5 0
Time [100μs/div]
Ordering Information
XC6501①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A without CE Pull-down, without CL Discharge
① Type of Regulators B
without CE Pull-down, with CL Discharge
(The Recommended Type)
②③ Output Voltage 15~80 e.g. 2.8V → ②=2, ③=8
±1.0% (2.0V~8.0V)
④ Output Voltage Accuracy 1
±20mV (1.5V~1.9V)
ER-G USP-6C (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit) MR-G SOT-25 (3,000/Reel)
PR-G SOT-89-5 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
With CE Pull-down, please contact your local Torex sales office or representative.
118
_____________________________________________________________________________________________________ ●
Pin Configuration
VOUT CE VBIAS
200 VBIAS=4.2V
VBIAS=5.0V
150
100
50
0
0 100 200 300 400
Output Current: IOUT(mA)
Ordering Information
XC6601①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Pull-down Resistor Built-in
① Type of Regulators
B No Pull-down Resistor Built-in
②③ Output Voltage 07 ~ 18 e.g.) VOUT(T)=1.2V⇒②=1,③=2
0.1V increments
1
e.g.) 1.2V⇒②=1,③=2,④=1
④ Output Voltage
0.05V increments
B
e.g.) 1.25V⇒=1,③=2,④=B
MR-G SOT-25 (3,000/Reel)
Packages
⑤⑥-⑦(*1) ER-G USP-6C (3,000/Reel)
(Order Unit)
PR-G SOT-89-5 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
119
16. Voltage Regulators Single Type ____________________________________________________________
XC6602 Series 1A, 0.5V Input Voltage, High Speed LDO Regulator
enables the electric charge at the output capacitor (CL) to be Output Capacitor: Ceramic Capacitor Compatible (2.2μF)
discharged via the internal switch. As a result the VOUT pin quickly Operating Ambient Temperature: -40°C ~ +85°C
returns to the VSS level. Packages: USP-6C, SOT-26W, SOT-89-5,
The CE pull-down function keeps the IC to be in stand-by mode even WLP-5-02
if the CE pin is left open. Environmentally Friendly: EU RoHS Compliant, Pb Free
Pin Configuration
250
Dropout Voltage: Vdif(mV)
VBIAS=3.3V
200
VBIAS=3.6V
VBIAS=5.0V
150
100
50
0
0 200 400 600 800 1000
Output Current: I OUT(mA)
Ordering Information
XC6602①②③④⑤⑥-⑦ With soft-start circuit built-in, can be selected from with or without functions
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Soft-start included
① Type
B Soft-start excluded
②③ Output Voltage 05~18 e.g. 1.2V → ②=1, ③=2
④ Output Voltage Accuracy 1 ±0.015V (VOUT<1.2V), ±0.020V (VOUT≧1.2V)
ER-G USP-6C (3,000/Reel)
MR-G SOT-26W (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
PR-G SOT-89-5 (1,000/Reel)
0R-G WLP-5-02 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
120
_____________________________________________________________________________________________________ ●
XC6603 Series 1A, 0.5V Low Input Voltage, High Speed LDO Regulator
(Adjustable Soft-start)
Pin Configuration
4 4
CE Input Voltage
CE Input Voltage: VCE(V)
2 3
0 2
Output Voltage
-2 1
-4 0
-6 -1
Time (1ms/div)
Ordering Information
XC6603①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Type A Adjustable Soft-start time with an external capacitor
②③ Output Voltage 05~18 e.g. 1.2V → ②=1, ③=2
④ Output Voltage Accuracy 1 ±0.015V (VOUT<1.2V), ±0.020V (VOUT≧1.2V)
ER-G USP-6C (3,000/Reel)
⑤⑥-⑦(*1) Packages (Order Unit)
MR-G SOT-26W (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
121
16. Voltage Regulators Single Type ____________________________________________________________
XC6604 Series 1A, 0.5V Low Input Voltage, High Speed LDO Regulator
(Adjustable Current Limit)
Pin Configuration
1.2
1
0.8
0.6
RLIM2=0kΩ
0.4 RLIM2=22kΩ
RLIM2=56kΩ
0.2 RLIM2=120kΩ
0
0.0 0.5 1.0 1.5
Output Current: IOUT(A)
Ordering Information
XC6604①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A With Soft-start, Adjustable Current Limit with an external resistor
① Type
B Without Soft-start, Adjustable Current Limit with an external resistor
②③ Output Voltage 05~18 e.g. 1.2V → ②=1, ③=2
④ Output Voltage Accuracy 1 ±0.015V (VOUT<1.2V), ±0.020V (VOUT≧1.2V)
(*1) ER-G USP-6C (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
MR-G SOT-26W (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
122
_____________________________________________________________________________________________________ ●
XC6701 Series 28V Operation High Speed Voltage Regulators with ON/OFF Control
VOUT CE 5 2 4
1 2 3
1 2 3
VIN VSS NC VOUT VSS VIN
1 2 3
1μF 1μF
VOUT VSS CE
SOT-25 USP-6C
SOT-89 SOT-89-5
(TOP VIEW) (BOTTOM VIEW)
(TOP VIEW) (TOP VIEW)
5.2 120
SOT-223 TO252
TO-252
(TOP VIEW)
5.0
(TOP VIEW) Output Voltage
4.8 90
4.6
4.4 60
4.2
4.0 30
Output Current
3.8
3.6 0
Time (1ms/div)
Ordering Information
XC6701①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Fixed output voltage, Active H
A
(Operating Ambient Temperature: -40℃≦Topr≦105℃)
Fixed output voltage, Active H
① Type B
(Operating Ambient Temperature: -40℃≦Topr≦85℃)
Fixed output voltage, with no CE function
D
(Operating Ambient Temperature: -40℃≦Topr≦85℃)
For the voltage within 1.8V~9.9V, that voltage.
For 10V,11V,12V,13V,14V,15V,16V,17V, and 18Vblocks, A, B, C, D, E, F, G, H, and J are respectively used for “②”.
“②” and “③”are decimal voltage values.
e.g.) 25 : 2.5V
②③ Output Voltage 18~J0
50 : 5.0V
B6 :11.6V
F2 :15.2V
J0 :18.0V
Output Voltage
④ 2 ±2.0%
Accuracy
MR-G SOT-25 (3,000/Reel) (Type A/B Only)
PR-G SOT-89-5 (1,000/Reel) (Type A/B Only)
Packages ER-G USP-6C (3,000/Reel) (Type A/B Only)
⑤⑥-⑦(*1)
(Order Unit) FR-G SOT-223 (1,000/Reel) (Type D Only)
JR-G TO-252 (2,500/Reel) (Type D Only)
PR-G SOT-89 (1,000/Reel) (Type D Only)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
123
16. Voltage Regulators Single Type ____________________________________________________________
Pin Configuration
16. Voltage Regulators Single Type
V SS
3
1 2
-V OUT -V IN
USP-6B
(BOTTOM VIEW) SOT-23
(TOP VIEW)
VSS
1 2 3
-VOUT VSS -VIN
(T Type)
TO-92
(SIDE VIEW)
1 2 3
-VOUT VSS -VIN
SOT-89
(TOP VIEW)
Ordering Information
XC62K①②③④⑤⑥⑦-⑧
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Polarity of Output Voltage N Negative
e.g. VOUT – 2.1V→②=2, ③=1
②③ Output Voltage 21~60
VOUT 6.0V→②=6, ③=0
④ Temperature Characteristics 0 ± 100ppm (TYP.)
1 ± 1.0% (semi-custom)
⑤ Output Voltage Accuracy
2 ± 2.0%
MR-G SOT-23 (3,000/Reel)
PR-G SOT-89 (1,000/Reel)
⑥⑦-⑧(*1) Packages (Order Unit) TH-G TO-92, Paper type (2,000/Tape)
TB-G TO-92, Bag (500/Bag)
DR-G USP-6B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
124
_____________________________________________________________________________________________________ ●
XC6901 Series 200mA Negative Voltage High Speed Regulator with ON/OFF Control
-4.6 300
GND
-5.4 100
NC 1mA
CE -5.6 100mA
50
SOT-25 -5.8 0
(TOP VIEW) Time(100μs/div)
Ordering Information
XC6901①②③④⑤⑥-⑦ ON/OFF Control Voltage Regulator (CE Active High) STANDARD VOLTAGE
● Examples for standard voltage
DESIGNATOR ITEM SYMBOL DESCRIPTION
VOUT PACKAGES
CE Pull-down resistor
① Type (*2) D (V) USP-6C SOT-25 SOT-89-5
CL Auto-discharge
-1.2V XC6901D121ER-G XC6901D121MR-G XC6901D121PR-G
-0.9V~-12V
-2.5V XC6901D251ER-G XC6901D251MR-G XC6901D251PR-G
②③ Output Voltage 09~C0 e.g. -0.9V→②=0, ③=9, -12V→②=C, ③=0
-2.6V XC6901D261ER-G XC6901D261MR-G XC6901D261PR-G
A:10, B:11, C:12
-3.0V XC6901D301ER-G XC6901D301MR-G XC6901D301PR-G
0.10V Increments
1 -3.3V XC6901D331ER-G XC6901D331MR-G XC6901D331PR-G
e.g. -1.2V→②=1, ③=2, ④=1
④ Output Type -4.0V XC6901D401ER-G XC6901D401MR-G XC6901D401PR-G
0.05V Increments for -0.95V~-4.95V
B -4.5V XC6901D451ER-G XC6901D451MR-G XC6901D451PR-G
e.g. -1.25V→②=1, ③=2, ④=B
ER-G USP-6C (3,000/Reel) -5.0V XC6901D501ER-G XC6901D501MR-G XC6901D501PR-G
Packages
⑤⑥-⑦(*1) MR-G SOT-25 (3,000/Reel) -6.0V XC6901D601ER-G XC6901D601MR-G XC6901D601PR-G
(Order Unit) -12.0V XC6901DC01ER-G XC6901DC01MR-G XC6901DC01PR-G
PR-G SOT-89-5 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2
For the type without CL auto-discharge, please contact your local Torex sales office or
representative.
125
16. Voltage Regulators Single Type __________________________________________________________ ●
XC6902 Series -16V Input Three Terminal Negative High Speed Voltage Regulator
Pin Configuration
16. Voltage Regulators Single Type
Ordering Information
XC6902①②③④⑤⑥-⑦ Three Terminal Voltage Regulator
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Type N Soft-start, Thermal Shutdown
251 -2.5V (±1.5%)
261 -2.6V (±1.5%)
301 -3.0V (±1.5%)
(*2) 331 -3.3V (±1.5%)
Output Voltage
②③④ 401 -4.0V (±1.5%)
(Accuracy)
451 -4.5V (±1.5%)
501 -5.0V (±1.5%)
601 -6.0V (±1.5%)
C01 -12.0V (±1.5%)
ER-G USP-6C (3,000/Reel)
Packages
⑤⑥-⑦(*1) MR-G SOT-23 (3,000/Reel)
(Order Unit)
PR-G SOT-89 (1,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For other output voltages, please contact your local Torex sales office or representative. The output voltage optional range is -0.9V to -12V.
126
● ____________________________________________________________ 17. Voltage Regulators Dual Type
Pin Configuration
1 2 3 1
4 2
5 3
6
VOUT2 VSS VOUT1 VIN V
VOUT2 NC EN2
SS VOUT1
3
XC6411
series
XC6411
1uF 0.1uF
series
V IN2 V OUT2
5
1uF 0.1uF
(ceram ic) (ceram ic)
V IN V OUT1
1
6
XC6412
XC6412
series
1uF 0.1uF
series
EN2 V OUT2
3
0.1uF
(ceram ic)
Ordering Information
XC6411P①②③④⑤-⑥ ●DESIGNATOR①②③
XC6412B①②③④⑤-⑥ XC6411 Series XC6412 Series
DESIGNATOR ITEM SYMBOL DESCRIPTION ①②③ VR1 VR2 ①②③ VR1 VR2
①②③ Output Voltage 001~ See DESIGNATOR①②③ Table 001 1.5 3.0 008 3.0 2.5
Packages SOT-25 (XC6411P) (3,000/Reel) 002 1.5 3.3 014 3.3 3.3
④⑤-⑥(*1) MR-G 003 1.5 1.5 016 1.8 1.3
(Order Unit) SOT-26 (XC6412B) (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. 015 2.0 2.0 021 3.0 3.0
017 1.2 1.8 022 1.8 3.0
023 1.8 3.6 024 3.0 1.2
025 1.2 1.2 026 3.1 3.1
For other output voltage, please contact your local Torex sales
office or representative.
127
17. Voltage Regulators Dual Type ______________________________________________________________
XC6415 Series 200mA Dual High Speed LDO Regulators with ON/OFF Switch
Pin Configuration
17. Voltage Regulators Dual Type
USPN-6
(BOTTOM VIEW)
3.35 200
Output Voltage(VR1 : 10mA)
3.30 150
(mA)
3.25 100
Output Current
(VR2 : 0.1mA→50mA)
3.20 50
3.15 0
Time (200uS/div)
Ordering Information
XC6415①②③④⑤⑥-⑦ DESIGNATOR ③④
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTON ③④ VR1 VR2 ③④ VR1 VR2 ③④ VR1 VR2
A (without EN1 pulled down resistor) (Accuracy 1.0%) (without CL discharge)
B (without EN1 pulled down resistor) (Accuracy 1.0%) (with CL discharge) 01 1.80 2.80 11 1.30 1.50 21 1.50 2.80
C (without EN1 pulled down resistor) (Accuracy 2.0%) (without CL discharge) 02 1.20 2.90 12 2.80 2.80 22 1.80 3.00
Type of Regulator 1 D (without EN1 pulled down resistor) (Accuracy 2.0%) (with CL discharge)
① 03 1.80 1.80 13 2.50 3.30 23 1.85 2.80
(All EN High Active) E (with EN1 pulled down resistor) (Accuracy 1.0%) (without CL discharge)
F (with EN1 pulled down resistor) (Accuracy 1.0%) (with CL discharge) 04 1.50 2.70 14 3.00 3.30 24 1.85 3.30
G (with EN1 pulled down resistor) (Accuracy 2.0%) (without CL discharge)
H (with EN1 pulled down resistor) (Accuracy 2.0%) (with CL discharge) 05 2.85 2.85 15 1.20 1.80 25 2.60 2.80
A (without EN2 pulled down resistor) (Accuracy 1.0%) (without CL discharge) 06 1.80 3.30 16 2.80 3.30 26 1.50 1.50
B (without EN2 pulled down resistor) (Accuracy 1.0%) (with CL discharge)
C (without EN2 pulled down resistor) (Accuracy 2.0%) (without CL discharge) 07 3.00 3.00 17 3.30 3.30 27 2.00 3.00
Type of Regulator 2 D (without EN2 pulled down resistor) (Accuracy 2.0%) (with CL discharge) 08 2.80 1.80 18 3.10 3.10 28 3.30 1.80
②
(All EN High Active) E (with EN2 pulled down resistor) (Accuracy 1.0%) (without CL discharge)
F (with EN2 pulled down resistor) (Accuracy 1.0%) (with CL discharge) 09 1.20 1.20 19 2.80 1.50 29 3.30 1.75
G (with EN2 pulled down resistor) (Accuracy 2.0%) (without CL discharge) 10 1.10 1.30 20 1.30 2.80 30 2.10 4.10
H (with EN2 pulled down resistor) (Accuracy 2.0%) (with CL discharge)
③④ Output Voltage - See DESIGNATOR ③④ Table * For other combinations, output voltages and etc., please ask
MR-G SOT-26 (3,000/Reel) Torex sales contacts.
MR SOT-26 (3,000/Reel)
Packages
⑤⑥-⑦(*1) ER-G USP-6C (3,000/Reel)
(Order Unit)
ER USP-6C (3,000/Reel)
7R-G USPN-6 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
128
_____________________________________________________________________________________________________ ●
*GreenOperation-compatible
XC6416 Series 200mA Dual High Speed LDO Voltage Regulator with “GreenOperation”
2.7 200
Typical Application Circuits
2.6 150
Output Voltage : V OUT(GO Mode)
2.5 100
IOUT =0.1mA
2.3 0
Time (10μs/div)
Ordering Information
XC6416①②③④⑤⑥-⑦ DESIGNATOR ③④
DESIGNATOR ITEM SYMBOL DESCRIPTION ③④ VR1 VR2
A Output accuracy 1.0%, SOT-26 Auto GO, No CL discharge 01 1.80 2.80
B Output accuracy 1.0%, SOT-26 Auto GO, Auto CL discharge 02 1.20 2.90
C Output accuracy 1.0%, USP-6C GO selection pin, No CL discharge 03 1.80 1.80
D Output accuracy 1.0%, USP-6C GO selection pin, Auto CL discharge 04 1.50 2.70
Type of Regulator
①
EN1= Active High 05 2.85 2.85
E Output accuracy 2.0%, SOT-26 Auto GO, No CL discharge
06 1.80 3.30
F Output accuracy 2.0%, SOT-26 Auto GO, Auto CL discharge 07 3.00 3.00
G Output accuracy 2.0%, USP-6C GO selection pin, No CL discharge 08 2.80 1.80
H Output accuracy 2.0%, USP-6C GO selection pin, Auto CL discharge 09 1.20 1.20
A Output accuracy 1.0%, SOT-26 Auto GO, No CL discharge 10 1.10 1.30
B Output accuracy 1.0%, SOT-26 Auto GO, Auto CL discharge 11 1.30 1.50
C Output accuracy 1.0%, USP-6C GO selection pin, No CL discharge 12 2.80 2.80
D Output accuracy 1.0%, USP-6C GO selection pin, Auto CL discharge 13 2.50 3.30
Type of Regulator
② 14 3.00 3.30
EN2= Active High E Output accuracy 2.0%, SOT-26 Auto GO, No CL discharge
15 1.20 1.80
F Output accuracy 2.0%, SOT-26 Auto GO, Auto CL discharge 16 2.80 3.30
G Output accuracy 2.0%, USP-6C GO selection pin, No CL discharge 17 3.30 3.30
H Output accuracy 2.0%, USP-6C GO selection pin, Auto CL discharge 18 3.10 3.10
Two Output Voltage 19 2.80 1.50
③④ 01 ~ See DESIGNATOR ③④ Table
Combination 20 1.30 2.80
(*1) Packages MR-G SOT-26 (3,000/Reel) 21 1.50 2.80
⑤⑥-⑦
(Order Unit) ER-G USP-6C (3,000/Reel) 22 1.80 3.00
* For other combinations, output voltages and etc., please ask Torex sales contacts. 23 1.85 2.80
(*1) 24 1.85 3.30
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
25 2.60 2.80
26 1.50 1.50
27 2.00 3.00
28 3.30 1.80
29 3.30 1.75
31 1.20 2.80
129
17. Voltage Regulators Dual Type ______________________________________________________________
XC6419 Series Dual High Speed LDO Regulator (ch1: 300mA, ch2: 100mA) with
ON/OFF Control
-40℃
[mV]
300 2CH最大出力電流
ch2 Maximum Output Current
: Vdif
100mA
Voltage: Vdif
200 ch2
2CH
150
Dropout
100
50 ch1
1CH
0
0 50 100 150 200 250 300
130
_____________________________________________________________________________________________________ ●
XC6420 Series 150mA Small Dual LDO Regulator with ON/OFF Control
75dB
80
: PSRR
I OUT = 0.1 mA
Rejection Ratio
60
1 2 3
50
RippleRejection
(TOP VIEW) 20
10
0
0.1 1 10 100 1000
Ripple Frequency:f [kHz]
Ordering Information
XC6420①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
EN1: Active High, EN2: Active High
① Basic Function A VOUT1: with CL Auto Discharge,
VOUT2: with CL Auto Discharge
② Enable Pin B EN1: With Pull-down, With EN2: Pull-down
③④ Output Voltage 01~ See DESIGNATOR③④ Table
7R-G USPN-6 (5,000/Reel)
Packages
⑤⑥-⑦(*1) MR-G SOT-26 (3,000/Reel)
(Order Unit)
DR-G USP-6B04 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
DESIGNATOR ③④
③④ VOUT1(V) VOUT2(V) ③④ VOUT1(V) VOUT2(V) ③④ VOUT1(V) VOUT2(V) ③④ VOUT1(V) VOUT2(V) ③④ VOUT1(V) VOUT2(V)
01 1.20 1.20 12 1.50 3.30 23 3.30 1.50 34 2.80 3.00 45 1.50 2.60
02 1.20 1.50 13 1.80 1.80 24 2.50 3.00 35 2.80 3.30 46 2.60 3.30
03 1.20 2.50 14 1.80 2.50 25 2.50 3.30 36 1.20 3.60 47 3.40 3.40
04 1.20 2.85 15 2.85 2.85 26 2.85 3.00 37 3.60 1.20 48 2.85 2.60
05 1.20 3.00 16 1.80 2.85 27 2.85 3.30 38 1.20 2.80 49 3.30 1.80
06 1.20 3.30 17 1.80 3.00 28 3.00 3.00 39 3.30 2.00 50 1.80 1.20
07 1.50 1.50 18 3.00 1.80 29 1.20 1.80 40 3.00 3.30 51 3.10 3.10
08 1.50 1.80 19 1.80 3.30 30 1.30 2.80 41 3.30 3.30 52 1.50 3.10
09 1.50 2.50 20 2.50 2.50 31 1.50 2.80 42 1.30 1.50 53 3.30 2.80
10 1.50 2.85 21 2.50 2.80 32 1.80 2.80 43 2.60 2.80 54 3.00 2.80
11 1.50 3.00 22 2.50 2.85 33 2.80 2.80 44 3.10 3.30 55 3.30 3.00
* For other output voltage combinations, please contact your local Torex sales office or representative.
131
17. Voltage Regulators Dual Type ______________________________________________________________
XC6421(VOUT=1.8V)
VIN=3.0V+0.5Vp-pAC, Ta=25℃
VOUT2 EN2 CIN=0.1μF(ceramic), CL =1.0μF(ceramic)
100
VIN
(dB) (dB)
VOUT1
80
PSRR
VSS EN1
Ratio: :RR
60
Rejection
Rejection
40
IOUT=0.1mA
Ripple
IOUT=1mA
IOUT=30mA
Ripple
20
IOUT=100mA
0
0.1 1 10 100 1000
Ripple Frequency : f (kHz)
Ordering Information
XC6421①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
EN1: Active High , EN2: Active High
Built-in Thermal Shutdown
① Basic Function A
Inrush Current Protection
VOUT1: CL Discharge, VOUT2: CL Discharge
② Enable Pin B EN1: With Pull-down EN2: With Pull-down
③④ Output Voltage 01~ See DESIGNATOR ③④ Table
⑤⑥-⑦(*1) Package (Order Unit) ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●DESIGNATOR ③④: Output Voltage
③④ VR1(V) VR2(V) ③④ VR1(V) VR2(V) ③④ VR1(V) VR2(V) ③④ VR1(V) VR2(V) ③④ VR1(V) VR2(V) ③④ VR1(V) VR2(V)
01 1.20 1.20 12 1.50 3.30 23 3.30 1.50 34 2.80 3.00 45 1.50 2.60 56 3.60 3.60
02 1.20 1.50 13 1.80 1.80 24 2.50 3.00 35 2.80 3.30 46 2.60 3.30 57 3.30 3.10
03 1.20 2.50 14 1.80 2.50 25 2.50 3.30 36 1.20 3.60 47 3.40 3.40 58 3.10 3.00
04 1.20 2.85 15 2.85 2.85 26 2.85 3.00 37 3.60 1.20 48 2.85 2.60 59 3.10 2.90
05 1.20 3.00 16 1.80 2.85 27 2.85 3.30 38 1.20 2.80 49 3.30 1.80 60 3.10 2.50
06 1.20 3.30 17 1.80 3.00 28 3.00 3.00 39 3.30 2.00 50 1.80 1.20 61 3.00 2.90
07 1.50 1.50 18 3.00 1.80 29 1.20 1.80 40 3.00 3.30 51 3.10 3.10 62 3.00 2.50
08 1.50 1.80 19 1.80 3.30 30 1.30 2.80 41 3.30 3.30 52 1.50 3.10 63 1.80 1.90
09 1.50 2.50 20 2.50 2.50 31 1.50 2.80 42 1.30 1.50 53 3.30 2.80 64 1.80 1.85
10 1.50 2.85 21 2.50 2.80 32 1.80 2.80 43 2.60 2.80 54 3.00 2.80 65 1.70 1.70
11 1.50 3.00 22 2.50 2.85 33 2.80 2.80 44 3.10 3.30 55 3.30 3.00
* For other output voltage combinations, please contact your local Torex sales office or representative.
132
_____________________________________________________________________________________________________ ●
XC6423 Series Ultra Small 300mA Dual High Speed LDO Regulator
with Inrush Current Prevention
500
85℃
Dropout Voltage : Vdiff(mV)
400 25℃
-40℃
300
200
100
0
0 50 100 150 200 250 300
Output Current : IOUT(mA)
Ordering Information
XC6423①②③④⑤⑥-⑦ Standard Voltage
DESIGNATOR ITEM SYMBOL DESCRIPTION
③④ VR1 (V) VR2 (V) PRODUCT NUMBER
Includes EN Pull-down, CL Auto-discharge, 32 1.8 2.8 XC6423AB321R-G
①② Type AB
Thermal Shutdown and Inrush Current Prevention
③④ Output Voltage 01~ See the chart below
(*1)
⑤⑥-⑦ Package (Order Unit) 1R-G LGA-6A01 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
133
18. Voltage Regulators Voltage Detect Type __________________________________________________
XC6402 Series 700mA High Speed LDO Regulators, Voltage Detector Function
CIN=1uF(ceramic) CL=1.0uF(ceramic)
1.0
Pin Configuration 0.9
EN / Cd 0.8 - 40℃
VD OUT
VSS - 25℃
Vdif(V)
5 4 1 EN/Cd
(V)
VROUT 5 2 NC 0.6
Dropou Voltage
VSS 4 3 V IN 0.5
1 2 3 0.4
Dropout
VR Outpu
OutputCurrent
CurrentIROUT
IROUT (mA)
(mA)
134
_____________________________________________________________________________________________________ ●
EN / CE XC6403/XC6404①②③④⑤⑥-⑦
VSEN / Cd VSS VDOUT EN/CE DESINATOR ITEM SYMBOL DESCRIPTION
5 4 VDOUT 6 1 VSEN/Cd A Toggle and EN function(*2)
B Toggle, EN function, VD signal/VR OFF function(*2)
VSS 5 2 NC
Operational C EN function
①
VROUT 4 3 VIN Function D CE function
1 2 3 E VSEN Pin
VIN VSS VROUT F Cd pin
USP-6B
USP-6B Type of
SOT-89-5 (BOTTOM
(BOTTOM VIEW)
VIEW) ② A~Z As in the chart below.
SOT-89-5 Regulator
SOT-25 (TOP VIEW) Internally set sequential number relating to output voltage
(TOP VIEW) and detect voltage
(refer to the chart below)
Output Voltage
VR setting output voltage range:
③④ & Detect 01~
0.9V~5.6V[XC6403]
Voltage
Typical Application Circuits 0.9V~5.1V[XC6404]
Detect voltage setting range: 0.9V ~5.5V
0.1V increments are available
MR-G SOT-25 (3,000/Reel)
Packages
⑤⑥-⑦(*1) PR-G SOT-89-5 (1,000/Reel)
(Order Unit)
DR-G USP-6B (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For A and B series, please contact your local Torex sales office or representative.
XC6403F Series
135
18. Voltage Regulators Voltage Detect Type __________________________________________________
XC6405 Series 500mA High Speed LDO Regulators, Voltage Detector Function
The XC6405E series can monitor another power source by using the VSEN pin
(semi-custom).
The XC6405F series can delay the detector output the delay time can be
controlled by the use of an external capacitor (semi-custom).
136
_____________________________________________________________________________________________________ ●
Pin Configuration
VIN VDOUT
5 2 4
VROUT Cd / VSEN
5 4
VIN 6 1 VROUT
VSS 5 NC
2 N.C.
VDOUT 4 3 Cd / VSEN
1 2 3
1.5
1
XC6408D
0.5
0
0 4 8 12 16 20 24 28
Input Voltage:VIN [V]
XC6408E
Ordering Information
XC6408D Series: VROUT pin voltage detection, release delay capacitor
XC6408E Series: VSEN pin for external voltage detection, auto power ON/OFF function
XC6408D①②③④⑤-⑥ XC6408E①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION DESIGNATOR ITEM SYMBOL DESCRIPTION
VDOUT VDOUT
① N Open Drain ① N Open Drain
Output Configuration Output Configuration
Output Voltage Output Voltage
②③ - See DESIGNATOR②③ Table ②③ - See DESIGNATOR②③ Table
Detect Voltage Detect Voltage
ER-G USP-6C (3,000/Reel) ER-G USP-6C (3,000/Reel)
④⑤-⑥(*1) Packages(Order Unit) MR-G SOT-25 (3,000/Reel) ④⑤-⑥(*1) Packages (Order Unit) MR-G SOT-25 (3,000/Reel)
PR-G SOT-89-5 (1,000/Reel) PR-G SOT-89-5 (1,000/Reel)
VD logic operates as detect low output and release high output. VD logic operates as detect low output and release high output.
(*1) (*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. The “-G” suffix denotes Halogen and Antimony free as well as being fully RoHS compliant.
DESIGNATOR②③ (No. 01 ~ 20 is standard voltage) DESIGNATOR②③ (No. 01 ~ 20 is standard voltage)
②③ VROUT VDF ②③ VROUT VDF ②③ VROUT VDF ②③ VROUT VDF
01 2.50 2.10 11 - - 01 2.50 2.10 11 2.50 2.70
02 3.00 2.50 12 - - 02 3.00 2.50 12 2.50 2.80
03 3.30 2.70 13 - - 03 3.30 2.70 13 3.00 4.10
04 3.30 2.80 14 - - 04 3.30 2.80 14 3.00 4.20
05 5.00 4.10 15 - - 05 5.00 4.10 15 3.30 4.10
06 5.00 4.20 16 - - 06 5.00 4.20 16 3.30 4.20
07 8.00 6.80 17 - - 07 8.00 6.80 17 5.00 5.60
08 9.00 5.00 18 - - 08 9.00 5.00 18 5.00 6.80
09 9.00 7.50 19 - - 09 9.00 7.50 19 9.00 10.00
10 12.00 10.00 20 - - 10 12.00 10.00 20 12.00 15.00
For other voltage, please contact your local Torex sales office or representative. For other voltage, please contact your local Torex sales office or representative.
137
18. Voltage Regulators Voltage Detect Type ________________________________________________ ●
XC6413/XC6414 Series 500mA High Speed LDO Regulators with Voltage Detector
Cd VSS
Rpull-up
Cd 1 VIN Cd 5 220kΩ
CIN
1.0μF
Cd 2 VSS
3 VROUT VDOUT 4
CL Cd
Ordering Information
XC6413 / XC6414①②③④⑤⑥-⑦ PIN NUMBER: ③,④ Types (80 ~ 99 : Standard voltage products)
DESIGNATOR ITEM SYMBOL DESCRIPTION ③④ VROUT VDOUT ③④ VROUT VDOUT ③④ VROUT VDOUT ③④ VROUT VDOUT
① Operational 01 11 80 1.8 1.6 90 1.3 2.0
F Cd pin
Function
02 12 81 2.8 3.1 91 1.5 2.0
② Type of VD Sense pin : VROUT, VD Output Logic :
Y 03 13 82 1.8 2.0 92
Regulator Detect L
Internally set sequential number relating to 04 14 83 2.5 2.8 93
Output output voltage and detect voltage (refer to the 05 15 84 2.85 3.2 94
Voltage & chart PIN NUMBER: ③④ Table) 06 16 85 3.0 3.3 95
③④ -
Detect VR setting output voltage range: 0.9V ~ 5.5V
07 17 86 3.5 3.8 96
Voltage Detect voltage setting range: 0.9V ~ 6.0V
100mV increments are available 08 18 87 3.0 4.2 97
MR-G SOT-25 (3,000/Reel) 09 19 88 3.3 4.0 98
Packages
⑤⑥-⑦(*1) PR-G SOT-89-5 (1,000/Reel) 10 20 89 99
(Order Unit)
DR-G USP-6B (3,000/Reel)) For other voltage, please contact your local Torex sales office or representative.
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU
RoHS compliant.
138
● _________________________________________________________________________________ 19. Load Switch
Pin Configuration
Ta=-40℃
5
Ta=25℃
S u p p ly C u r r e n t: IS S ( μ A )
1
VIN VOUT IN
XC8101 CPU
CE 0
ON/OFF VSS 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
CIN Control CL
Input Voltage: VIN (V)
Ordering Information
XC8101①②③④⑤⑥-⑦
139
19. Load Switch ___________________________________________________________________________________
Pin Configuration
VIN VOUT
2.1V
VIN VOUT IN
●On Resistance vs. Input Voltage
Step Down XC8102 CPU XC8102AA01M/XC8102AA01G
CE
VSS VIN=CE
Li-ion DC/DC ON/OFF
3.6V CIN Control CL IOUT=50mA
XC9235 CIN=None,CL=None
1.0
ON Resistance : RON (Ω
VIN VOUT IN
0.8 Ta=85℃
XC8102 CPU
CE 25℃
ON/OFF VSS
0.6 -40℃
Control
CIN CL
0.4
0.2
VIN VOUT IN
XC8102 CPU
CE 0.0
ON/OFF VSS
CIN Control 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
CL
Ordering Information
XC8102AA01①②-③
DESIGNATOR ITEM SYMBOL DESCRIPTION
GR-G USP-4 (3,000/Reel)
MR-G SOT-25 (3,000/Reel)
①②-③(*1) Packages (Order Unit)
NR-G SSOT-24 (3,000/Reel)
7R-G USPN-4 (5,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
140
_____________________________________________________________________________________________________ ●
XC8107 Series 85mΩ High Function Power Switch (Fixed Current Limit)
CIN=1.0μF(ceramic), CL =1.0μF(ceramic)
6.0
0.5A type
1.0A type
5.0
Output Voltage : VOUT [V]
1.5A type
2.0A type
4.0
3.0
2.0
Typical Application Circuit Ty
1.0
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output Current : I OUT [A]
Ordering Information
XC8107①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A Active High
① CE Logic
B Active Low
C Auto-recovery (*1)
② Protection Circuits Type
D Latch-off (*2)
05 0.5A (0.9A)(*4)
10 1.0A (1.4A)(*4)
③④ Maximum Output Current
15 1.5A (1.9A)(*4)
20 2.0A (2.4A)(*4)
(*3) ER-G USP-6C (3,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
MR-G SOT-25 (3,000/Reel)
(*1)
Over Current Protection, Reverse Current Prevention, and Thermal Protection are Auto-recovery.
(*2)
Over Current Protection and Reverse Current Prevention are Latching, Thermal Protection is Auto-recovery.
(*3)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*4)
Current Limit Value
141
19. Load Switch ___________________________________________________________________________________
XC8108 Series 85mΩ High Function Power Switch with Current Limit Adjustable Pin
(0.9A~2.4A Current Limit Adjustable)
XC8108xC20ER
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
6.0
RILIM=39.2kΩ
5.0
Output Voltage : VOUT [V]
RILIM=18.4kΩ
RILIM=5.76kΩ
4.0 RILIM=0kΩ
3.0
2.0
Typical Application Circuit
1.0
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output Current : IOUT [A]
Ordering Information
XC8108①②③④⑤⑥-⑦
142
_____________________________________________________________________________________________________ ●
XC8109 Series 85mΩ High Function Power Switch with Current Limit Adjustable Pin
(0.075A~1.3A Current Limit Adjustable)
XC8109xC10ER
5.0 RILIM=0kΩ
4.0
2.0
1.0
0.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
Ordering Information
XC8109①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
A
① CE Logic
B
Refer to Selection Guide
C
② Protection Circuits Type
D
0.9A
③④ Maximum Output Current 10
(* Adjustable current limit range:0.075A~1300mA)
(*1)
⑤⑥-⑦ Package (Order Unit) ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE CE LOGIC SELECTABLE SOFT-START CURRENT LIMIT ADJUSTABLE
AC Active High Yes Yes
AD Active High Yes Yes
BC Active Low Yes Yes
BD Active Low Yes Yes
143
20. Charge Pump ICs _______________________________________________________________________________________
Pin Configuration
20. Charge Pump ICs
USP-6B
(TOP VIEW)
SOT-26
<SOT-23-6>
(TOP VIEW)
(TOP VIEW)
Ordering Information
XC6351A①②③④⑤-⑥
144
_____________________________________________________________________________________________________ ●
Pin Configuration
Ordering Information
XC9801①②③④⑤⑥-⑦: Without Pulse Skip
XC9802①②③④⑤⑥-⑦: With Pulse Skip
145
21. Battery Charge IC _______________________________________________________________________________________
XC6801 Series 500mA 1 Cell Li-ion and Li-Po Battery Linear Charger IC with
Constant-Current/Constant-Voltage
Pin Configuration
21. Battery Charge IC
800 4.2
Charge Current IBAT (mA)
700
600 3.9
500
400 3.6
300
200 Charge Current(Lim:H) 3.3
100
0 3.0
0 0.3 0.6 0.9 1.2 1.5
Time (hour)
Ordering Information
XC6801A42①②③-④
146
_____________________________________________________________________________________________________ ●
XC6802 Series 800mA 1 Cell Li-ion and Li-Po Battery Linear Charger IC with
Constant-Current/Constant-Voltage
Pin Configuration
/CHG BAT
5 2 4
ISEN VIN
5 4
1 BAT
Li-ion
Current: IIBAT
VSS Battery
400 3.80
RSEN
Charge Current
300 3.60
Charge
200 Charge
ChargeCurrent
Current 3.40
100 3.20
0 3.00
0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
Time
Time (hours)
(hour)
Ordering Information
XC6802A42X①②-③
147
21. Battery Charge IC _______________________________________________________________________________________
XC6803 Series One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
(CC Charge:40~280mA)
Pin Configuration
VIN 6 1 BAT
21. Battery Charge IC
THIN 5 2 VSS
CE 4
ISET 3 CSO
USP-6EL
(BOTTOM VIEW)
CSO
CIN CL
1µF Protection 0 °C 10 °C 45 °C 60 °C
4.5~ 6 V 1µF THIN IC Constant-Current Charge vs. NTC Temperature
VSS
VBAC = 4.2V
Thermistor (NTC)
VBAC = 4.05V
Cold Normal Operation
Operation
Hot
Operation
(*1)
0 °C 10 °C 45 °C 60 °C
Constant-Voltage Charge vs. NTC Temperature
Ordering Information
XC6803①②③④⑤⑥-⑦
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
A 1kHz ON-OFF
① Charge Status Output on Abnormal Mode
B OFF
3 3 Temperature Monitor
② Battery Temperature Monitor Function
4 4 Temperature Monitor
E Enable
③ Recharge Function
D Disable
④ CV Charge Voltage 1 4.2V (Fixed)
⑤⑥-⑦(*1) Package (Order Unit) 4R-G USP-6EL (3,000/Reel)
(*1)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
148
_____________________________________________________________________________________________________ ●
XC6804 Series One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
(CC Charge:200~800mA)
Pin Configuration
NC 2 7 NC THIN 5 2 VSS
VIN RISET
ISET
Li-ion Battery IBAC = C×0.5 mA Hot
Operation
BAT Cold
Normal Operation (*1)
Operation
CIN CL
1µF Protection
4.5 ~ 6 V 1µF THIN IC 0 °C 10 °C 45 °C 60 °C
VBAC = 4.05V
Cold Normal Operation
Operation
Hot
Operation
(*1)
0 °C 10 °C 45 °C 60 °C
Constant-Voltage Charge vs. NTC Temperature
Ordering Information
XC6804①②③④⑤⑥-⑦
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
A 1kHz ON-OFF
① Charge Status Output on Abnormal Mode
B OFF
3 3 Temperature Monitor
② Battery Temperature Monitor Function
4 4 Temperature Monitor
E Enable
③ Recharge Function
D Disable
④ CV Charge Voltage 1 4.2V (Fixed)
(*1) QR-G SOP-8FD (1,000/Reel)
⑤⑥-⑦ Packages (Order Unit)
4R-G USP-6EL (3,000/Reel)
(*1)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
149
21. Battery Charge IC _____________________________________________________________________________________ ●
XC6805 Series One Cell Li-ion / Li-polymer Linear Charger IC with Battery Temperature Detection
(CC Charge:5~40mA)
Pin Configuration
VIN 6 1 BAT
THIN / NF 5 2 VSS
21. Battery Charge IC
ICE
SET 4 3 CSO
USP-6EL
(BOTTOM VIEW)
VIN RISET
ISET
Li-ion Battery IBAC = C×0.5 mA Hot
BAT Normal Operation Operation
(*1)
Cold
CIN CL Operation
1µF Protection
4.5 ~ 6 V 1µF THIN IC
0 °C 10 °C 45 °C 60 °C
VSS
Constant-Current Charge vs. NTC Temperature
Thermistor (NTC)
VBAC = 4.2V
VBAC = 4.05V
Cold Normal Operation
Operation
Hot
Operation
(*1)
0 °C 10 °C 45 °C 60 °C
Constant-Voltage Charge vs. NTC Temperature
Ordering Information
XC6805①②③④⑤⑥-⑦
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
A 1kHz ON-OFF
① Charge Status Output on Abnormal Mode
B OFF
3 3 Temperature Monitor
② Battery Temperature Monitor Function 4 4 Temperature Monitor
N No Temperature Monitor
E Enable
③ Trickle Charge Function
D Disable
④ CV Charge Voltage 1 4.2V (Fixed)
⑤⑥-⑦(*1) Package (Order Unit) 4R-G USP-6EL (3,000/Reel)
(*1)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
150
● __________________________________________________________________________ 22. Multi Chip Module
VOUT1
(BOTTOM VIEW)
Ordering Information
XCM406①②③④⑤⑥-⑦
151
22. Multi Chip Module ____________________________________________________________________________
USP-12B01
(BOTTOM VIEW)
Ordering Information
XCM517①②③④⑤⑥-⑦
DESIGNATOR ITEM SYMBOL DESCRIPTION
Control, Oscillation
①② - See the chart below
Frequency and Options
Internally set sequential number relating to output voltage
③④ Output Voltage -
(See the chart below)
(*1)
⑤⑥-⑦ Package (Order Unit) DR-G USP-12B01 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
DESIGNATOR ①②
OCSILLATION HIGH SPEED
①② CONTROL CL DISCHARGE EN INPUT LOGIC
FREQUENCY SOFT-START
AA PWM Control 1.2M Not Available Not Available High Active
AB PWM Control 3.0M Not Available Not Available High Active
AC PWM/PFM Auto 1.2M Not Available Not Available High Active
AD PWM/PFM Auto 3.0M Not Available Not Available High Active
BA PWM Control 1.2M Available Available High Active
BB PWM Control 3.0M Available Available High Active
BC PWM/PFM Auto 1.2M Available Available High Active
BD PWM/PFM Auto 3.0M Available Available High Active
152
_____________________________________________________________________________________________________ ●
Pin Configuration
PGND *1 AGND
VIN1 EN1
VBIAS VIN2
NC VSS2
*2
EN2 VROUT
(BOTTOM VIEW)
VBIAS=3.0V
250 VBIAS=3.3V
VBIAS=3.6V
200 VBIAS=4.2V
VBIAS=5.0V
150
100
50
0
(TOP VIEW) 0 100 200 300 400
* The dashed lines denote the connection using Output Current: IOUT(mA)
through-holes at the backside of the PC board.
Ordering Information
XCM519A①②③④⑤-⑥ DC/DC BLOCK:PWM fixed control
XCM519B①②③④⑤-⑥ DC/DC BLOCK:PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
OSCILLATION FREQUENCY CL AUTO DISCHARGE SOFT START
A 1.2M Not Available Standard
① Type B 3.0M Not Available Standard
C 1.2M Available High Speed
D 3.0M Available High Speed
01 DCOUT=1.8V, VROUT=1.2V
02 DCOUT=1.8V, VROUT=1.5V
②③ Output Voltage (*2) 03 DCOUT=1.5V, VROUT=1.2V
04 DCOUT=1.8V, VROUT=1.0V
05 DCOUT=1.5V, VROUT=1.0V
(*1)
④⑤-⑥ Package (Order Unit) DR-G USP-12B01 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
This series are semi-custom products. For other combinations of output voltages please contact your local Torex sales office or representative.
* When the DCOUT pin is connected to VIN2, DCOUT pin output voltage can be fixed in the range of 1.0V~3.0V.
153
22. Multi Chip Module __________________________________________________________________________ ●
Pin Configuration
22. Multi Chip Module
USP-12B01 USP-12B01
(TOP VIEW) (BOTTOM VIEW)
SBD:CLS01, L=SLF10165T-4.7μH
CIN=22uF(ceramic), CL=47uF(ceramic), RSENSE=50mohm
VOUT=3.3V
100
VIN=5.0V
90
80
Efficiency : EFFI (%)
70
(TOP VIEW) 60
50
40 VIN=12V
30
20 PWM(XCM526A)
10 PFM(XCM526B)
0
0.1 1 10 100 1000 10000
Output Current : IOUT (mA)
Ordering Information
XCM526A①②③④⑤-⑥…PWM control
XCM526B①②③④⑤-⑥…PWM/PFM automatic switching control
DESIGNATOR ITEM SYMBOL DESCRIPTION
C Soft-start internally fixed
① Type
D Soft-start externally set
② Output Voltage 9 FB Standard Voltage 0.9V±1.5%
5 500kHz
③ Oscillation Frequency (*2)
A 1.0MHz
(*1)
④⑤-⑥ Package (Order Unit) DR-G USP-12B01 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For the 300kHz type is semi-custom product. Please contact your local Torex sales office or representative.
154
● ______________________________________________________________________ 23. Temperature Sensors
2000
1500
VPull-up
500
-50 -25 0 25 50 75 100 125
RPULL Ambient Temperature: Ta [℃]
VDD
VDOUT Alarm Output
Ordering Information
PRODUCT NAME ALARM TEMPERATURE (*2) HYSTERESIS WIDTH (*3) PACKAGE ORDER UNIT
XC3101AC70NR-G(*1) 70°C 5°C SSOT-24 3,000/Reel
XC3101AC707R-G(*1) 70°C 5°C USPN-4 5,000/Reel
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
(*2)
For other alarm temperature besides 70°C, please contact your local Torex sales office or representative.
Optional setting range is 50°C ~ 95°C.
(*3)
The hysteresis width selections are available in 5°C and 2 other optional for alarm temperature.
155
24. Hall IC (Magnetic Sensor) __________________________________________________________________________ ●
30
VIN=5.5V
20
3.0V
24. Hall IC (Magnetic Sensor)
10
2.4V
Typical Application Circuit
0
VDD -40 -20 0 20 40 60 80 100
Ambient Temperature:Ta (℃)
VOUT
XC 3202
OUTPUT
VSS
Ordering Information
XC3202B183①②-③
DESIGNATOR ITEM SYMBOL DESCRIPTION
(*1) MR-G SOT-23D (3,000/Reel)
①②-③ Packages (Order Unit)
ZR-G QFN-0601 (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
156
● _____________________________________________________________________________________________ 25. Oscillator IC
XC2163 Series ICs for use with 3rd Overtone Crystal Oscillators
SOT-26
SOT-26
<SOT-23-6> /XT VSS
(TOP VIEW)
( TOP VIEW )
/INH
Ordering Information
25. Oscillator IC
XC2163①②③④⑤⑥-⑦
157
25. Oscillator IC ___________________________________________________________________________________
/XT VSS
Ordering Information
XC2164①②③④⑤⑥-⑦
25. Oscillator IC
158
_____________________________________________________________________________________________________ ●
XT 2 5 VDD
VSS 3 4 Q0
SOT-26
(TOP VIEW)
25. Oscillator IC
VDD=5.0V, fin=70MHz, Vipp=0.5Vpp
CIN = 10000 [pF]
Rf = 100 [kΩ]
Rb = 720 [kΩ]
Ordering Information
XC2301①②③④⑤⑥-⑦
159
26. PLL Clock Generator ICs ____________________________________________________________________
XC2173 Series ICs for use with Crystal Oscillators (PLL Built-in)
Block Diagram
QO
VDD
Cg Cd
26. PLL Clock Generator ICs
Rup Rf
1/2 1/2 1/2
XT
/INH
Ordering Information
XC2173①②③④⑤⑥-⑦
160
___________________________________________________________________________________________________________________
●
XC25BS7 Series PLL Clock Generator ICs with Built-in Divider/Multiplier Circuits
Pin Configuration
CLKin VDD
5 4
VDD 6 1 Q0
NC 5 2 VSS
CLKin 4 3 CE
1 2 3
CE VSS Q0
SOT-25 USP-6C
Jitter=20ns TYP.
Ordering Information
XC25BS7①②③④⑤-⑥
161
26. PLL Clock Generator ICs __________________________________________________________________ ●
XC25BS8 Series Ultra Small PLL Clock Generator ICs with Built-in
Divider/Multiplier Circuits
Pin Configuration
Q0 VSS CE
6 5 4
VDD 6 1 Q0
LPF 5 2 VSS
CLKin 4 3 CE
1 2 3
26. PLL Clock Generator ICs
6
XC25BS8
VDD Cin
5
2
Input入力信号
Signal Output
出力 jitter
ジ ッタ Typ 測定値
ffCLKin
CLKin tJ2=20(ns)
Tj2=20(nsec)
fCLKin
4
3
CE input
Output
出力信号 Signal
ffQ0Q0
Ordering Information
XC25BS8①②③④⑤-⑥
DESIGNATOR ITEM SYMBOL DESCRIPTION
Serial number based on internal standards
①②③ Product Number 001~
e.g. product number 001 → ①②③=001
(*1) MR-G SOT-26W (3,000/Reel)
④⑤-⑥ Packages (Order Unit)
ER-G USP-6C (3,000/Reel)
(*1)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
162
● ___________________________ 27. Reference Pattern Layout Dimensions, Package Power Dissipation
Unit: mm
USP-2B01 USP-2B02
Note : Reference metal mask design Note : Reference metal mask design
0.40
0.35
USP-3 USP-4
Note : Reference metal mask design
Note : Reference metal mask design
163
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
0.6
4 3 4 3
0.3
0.4
0.2
0.25
0. 3
2.0
1.9
(R 0.05)
0.5
0.8
0 .2
0. 3
0.4
1 2 1 2
0.6 0.6
USPN-4B02 USP-6B
Note : Reference metal mask design
0.25
0. 22 5
0.25 0 .2 5 0 .2 5
0. 5 0.5
0.5 0 .5
1.8
1.2
1.4
0 .6
0.05 0 .0 5 0 .1 5 0.15
1.0 0.8
27. Reference Pattern Layout Dimensions, Package Power Dissipation
USP-6B01 USP-6B04
1 6
2 5
3 4
0.275
USP-6C USPN-6
Note : Reference metal mask design
164
_____________________________________________________________________________________________________ ●
2.2
0.9
0.3
0.55 0.55
USP-8A01 USP-9B01
Note : Reference metal mask design Note : Reference metal mask design
is copper area.
Mark ※ is opening of resist.
USP-10 USP-10B
0.35
1 .0
1 .3
2. 9
2.8
1.5
0. 35
0. 45
1 2 3 4 5 1 2 3 4 5
0. 22 5 0 . 5 0 . 5 0. 5 0. 5 0. 2 2 5 0 . 5 0 .5 0 .5 0 . 5
0. 35 0. 3 5
USP-10B3 USP-12B01
Note : Reference metal mask design
Note : Reference metal mask design
0.025
1.55
1.6
0.025 0.025
1.3
1.1
0.95
0.95
0.55
0.55
0.6
0.1
0.25 0.15
0.25 0.15
0.1
0.65
0.65
0.6
1.05
1.05
1.1
0.025
1.3
1.55
1.6
165
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the CL-2025 is shown in this page. Power dissipation data for the LGA-4B01 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
40.0
2.54
27. Reference Pattern Layout Dimensions, Package Power Dissipation
1.4
40.0
28.9
2.5
2.54 1.4
1200
1000
Power許容損失Pd(mW)
800
CL-2025-02
600
CL-2025
400
200
0
25 45 65 85 105 125
Ambient周囲温度Ta(℃)
Temperature: Ta (℃)
166
_____________________________________________________________________________________________________ ●
Power dissipation data for the LGA-6A01 is shown in this page. Power dissipation data for the LGA-8B01 is shown in this page.
The value of power dissipation varies with the mount board Please use this data as the reference data taken in the
conditions. following condition.
Please use this data as the reference data taken in the
following condition. 1. Measurement Condition
Condition: Mount on a board
1. Measurement Condition Ambient: Natural convection
Condition: Mount on a board Soldering: Lead (Pb) free
2
Ambient: Natural convection Board: Dimensions 40mm×40mm (1600mm in one side)
Soldering: Lead (Pb) free Copper (Cu) traces
2 st
Board: 40mm×40mm (1600mm in one side) 1 Layer:Approx 50%_Connects to lead 1/4/5/8
st nd
Metal Area: 1 Metal Layer about 50% 2 Layer:Approx 50%_Connects to lead 1/4/5/8
nd rd
2 Inner Metal Layer about 50% 3 Layer:Approx 50%_Connects to lead 1/4/5/8
rd th
3 Inner Metal Layer about 50% 4 Layer:Approx 50%_Connects to lead 1/4/5/8
th
4 Metal Layer about 50% (The copper area is divided into four bloak,
Each heat sink back metal is connected to the one block is 12.5% of total. Each terminal
inner layers respectively. connects one copper block in the front and
Material: Glass Epoxy (FR-4) one in the back.)
Thickness: 1.0 mm Material: Glass Epoxy (FR-4)
Through-hole: 4 x 0.4 Diameter Thickness: 1.6mm
Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm) Evaluation Board (Unit: mm) 27. Reference Pattern Layout Dimensions, Package Power Dissipation
2. Power Dissipation vs. Ambient temperature 2. Power Dissipation vs. Ambient Temperature
Pd-Ta特性グラフ
Pd vs. Ta
Pd vs Ta
Dissipation: Pd (mW)
700
1200
Power Dissipation: Pd (mW)
600
Power許容損失Pd(mW)
500 1000
400 800
300 600
200
400
100
0 200
25 45 65 85 105 125 0
Ambient 周囲温度Ta(℃)
Temperature: Ta (℃) 25 45 65 85 105 125
Ambient Temperature: Ta (℃)
167
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the MSOP-10 is shown in this page. Power dissipation data for the QFN-20 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
40
27. Reference Pattern Layout Dimensions, Package Power Dissipation
1. 4
2.5
28.9
Evaluation Board (Unit: mm) Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature 2. Power Dissipation vs. Ambient Temperature
Pd vs Ta
1200
Power Dissipation Pd (mW)
1000
800
600
400
200
0
25 45 65 85 105 125
Ambient Tem perature Ta (℃)
168
_____________________________________________________________________________________________________ ●
Power dissipation data for the QFN-24 is shown in this page. Power dissipation data for the SOP-8FD is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
2. Power Dissipation vs. Ambient Temperature 2. Power Dissipation vs. Ambient Temperature
Pd-Ta特性グラフ
Pd vs. Ta Pd-Ta特性グラフ
Pd VS. Ta
Dissipation: Pd(mW)
1600 1600
Pd (mW)
Pd
1400 1400
許容損失Pd(mW)
許容損失Pd(mW)
Dissipation:
1200 1200
1000 1000
( W)
Dissipation:
800 800
600 600
400 400
PowerPower
200 200
Power
0 0
25 45 65 85 105 125 25 45 65 85 105 125
周囲温度Ta(℃)
Ambient Temperature: Ta (℃) 周囲温度Ta(℃)
Ambient
Ambient Temperature: Ta((℃)
Temperature: Ta ℃)
169
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the SOT-223 is shown in this page. Power dissipation data for the SOT-23 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. Ambient Temperature: Ta (℃) following condition.
28.9
28.9
40.0
28.9
40.0
27. Reference Pattern Layout Dimensions, Package Power Dissipation
2.5
2.5
2.54 1.4
Evaluation Board (Unit: mm) Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature 2. Power Dissipation vs. Ambient temperature
Board Mount (Tj max = 125℃) Board Mount (Tj max = 125℃)
Ambient Power Dissipation Thermal Ambient Power Dissipation Thermal
Temperature (℃) Pd (mW) Resistance (℃/W) Temperature (℃) Pd (mW) Resistance (℃/W)
25 1500 25 500
66.67 200.00
85 600 85 200
Pd vs Ta Pd vs Ta
1600 600
1400
Power Dissipation Pd (mW)
Power Dissipation Pd (mW)
500
1200
400
1000
800 300
600 200
400
100
200
0 0
25 45 65 85 105 125 25 45 65 85 105 125
Ambient Temperature Ta (℃) Ambient Temperature Ta (℃ )
170
_____________________________________________________________________________________________________ ●
2.54 1.4
40.0
2. Power Dissipation vs. Ambient temperature
Pd vs Ta
600
500
400 2. Power Dissipation vs. Ambient temperature
300
200
100 Board Mount (Tj max = 125℃)
0
25 45 65 85 105 125 Ambient Power Dissipation Thermal
Ambient Temperature Ta (℃)
Temperature (℃) Pd (mW) Resistance (℃/W)
25 600
3. Power Dissipation vs. Ambient temperature (105℃) 166.67
85 240
Board Mount (Tj max = 125℃)
Ambient Power Dissipation Thermal Resistance Pd vs Ta
Temperature (℃) Pd (mW) (℃/W)
25 600 700
166.67
105 120 600
Power Dissipation Pd (mW)
500
Pd vs Ta
400
700
600 300
Power Dissipation Pd (mW)
500 200
400
100
300
200 0
100
25 45 65 85 105 125
Ambient Temperature Ta (℃ )
0
25 45 65 85 105 125
Ambient Temperature Ta (℃)
171
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the SOT-26W is shown in this page. Power dissipation data for the SOT-89 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
40.0
28.9
28.9
40.0
27. Reference Pattern Layout Dimensions, Package Power Dissipation
2.5
2.54 1.4
2. Power Dissipation vs. Ambient temperature 2. Power Dissipation vs. Ambient temperature
Board Mount (Tj max = 125℃) Board Mount (Tj max = 125℃)
Ambient Power Dissipation Thermal Ambient Power Dissipation Thermal
Temperature (℃) Pd (mW) Resistance (℃/W) Temperature (℃) Pd (mW) Resistance (℃/W)
25 600 25 1000
166.67 100.00
85 240 85 400
Pd vs Ta Pd vs Ta
700 1200
Power Dissipation Pd (mW)
600
Power Dissipation Pd (mW)
1000
500
800
400
600
300
200 400
100 200
0 0
25 45 65 85 105 125 25 45 65 85 105 125
Ambient Temperature Ta (℃ ) Ambient Temperature Ta (℃)
172
_____________________________________________________________________________________________________ ●
40.0
Pd vs Ta
1400
Power Dissipation Pd (mW)
1200
1000
Evaluation Board (Unit: mm)
800
600
400
2. Power Dissipation vs. Ambient temperature
200
0
25 45 65 85 105 125 Board Mount (Tj max = 125℃)
Ambient Temperature Ta (℃)
Ambient Power Dissipation Thermal
Temperature (℃) Pd (mW) Resistance (℃/W)
3. Power Dissipation vs. Ambient temperature (105℃)
25 500
200.00
85 200
Board Mount (Tj max = 125℃)
Ambient Power Dissipation Thermal Resistance
Temperature (℃) Pd (mW) (℃/W)
Pd vs Ta
25 1300
76.92
105 260 600
500
Pd vs Ta
400
1400
300
Power Dissipation Pd (mW)
1200
1000
200
800
600 100
400
200 0
0
25 45 65 85 105 125
25 45 65 85 105 125 Ambient Temperature Ta (℃ )
Ambient Temperature Ta (℃)
173
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the TO-252 is shown in this page. Power dissipation data for the USP-2B01 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
Pd vs Ta
2000
1800
Power Dissipation Pd (mW)
1600
1400
1200
1000
800
600
400
200
0
25 45 65 85 105 125
Ambient Temperature Ta (℃ )
174
_____________________________________________________________________________________________________ ●
Power dissipation data for the USP-2B02 is shown in this page. Power dissipation data for the USP-3 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
Pd vs Ta
1200
Power Dissipation Pd (mW)
1000
800
600
400
200
0
25 45 65 85 105 125
Ambient Temperature Ta (℃)
175
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the USP-4D is shown in this page. Power dissipation data for the USP-6B04 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
40
27. Reference Pattern Layout Dimensions, Package Power Dissipation
2.5
2.54 1.4
176
_____________________________________________________________________________________________________ ●
Power dissipation data for the USP-6C, USP-6B, USP-6EL, and USP-4 Power dissipation data for the USP-8 is shown in this page.
is shown in this page.
The value of power dissipation varies with the mount board conditions. The value of power dissipation varies with the mount board
Please use this data as the reference data taken in the following conditions.
condition.
Please use this data as the reference data taken in the
1. Measurement Condition following condition.
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free 1. Measurement Condition
Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Condition: Mount on a board
Copper (Cu) traces occupy 50% of the board area
in top and back faces. Ambient: Natural convection
Package heat-sink is tied to the copper traces. Soldering: Lead (Pb) free
Material: Glass Epoxy (FR-4) 2
Thickness: 1.6mm Board: Dimensions 40 x 40 mm (1600 mm in one side)
Through-hole: 4 x 0.8 Diameter Copper (Cu) traces occupy 50% of the board area
in top and back faces.
Package heat-sink is tied to the copper traces.
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter
28.9
40.0
2.5
Pd vs. Ta
1000
Disspation: Pd
800
Power Dissipation:
200
Board Mount (Tj max = 125℃)
0
25 45 65 85 105 125 Ambient Power Dissipation Thermal
Ambient Temperature: Ta(℃)
Temperature (℃) Pd (mW) Resistance (℃/W)
25 1200
83.33
3. USP-6C Power Dissipation vs. Ambient temperature (105℃) 85 480
100.00 1200
105 200
1000
Pd vs Ta 800
600
Power Dissipation Pd (mW)
1200
1000 400
800
600
200
400 0
200 25 45 65 85 105 125
0 Ambient Temperature Ta (℃)
25 45 65 85 105 125
Ambient Temperature Ta (℃)
177
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the USP-9B01 is shown in this page. Power dissipation data for the USP-10B is shown in this page.
Please use this data as the reference data taken in the The value of power dissipation varies with the mount board
following condition. conditions.
Please use this data as the reference data taken in the
1. Measurement Condition following condition.
Condition: Mount on a board
Ambient: Natural convection 1. Measurement Condition
Soldering: Lead (Pb) free Condition: Mount on a board
2
Board: Dimensions 40mm×40mm (1600mm in one side) Ambient: Natural convection
Copper (Cu) traces occupy 50% of the board area Soldering: Lead (Pb) free
2
in top and back faces. Board: 40 x 40 mm (1600 mm in one side)
Package hear-sink is tied to the copper traces. Inner two metal layers, no large metal area in
Material: Glass Epoxy (FR-4) the front and back.
st
Thickness: 1.6mm Copper Area: 1 Inner metal layer about 50%
th
Through-hole: 4 x 0.8 Diameter 4 Inner metal layer about 50%
Each Heatsink back metal is connected to the
inner layers respectively.
nd rd
2 and 3 Inner metal layer does not exist.
Material: Glass Epoxy (FR-4)
Thickness: 1.6mm
Through-hole: 4 x 0.8 Diameter
40.0
2.5
2.54
1.4
27. Reference Pattern Layout Dimensions, Package Power Dissipation
40. 0
28.9
1400
Power Dissipation: Pd (mW)
Pd vs. Ta
Pd-Ta特性グラフ
1200
1000
Dissipation: Pd (mW)
1200
800
1000
Power許容損失Pd(mW)
600
400 800
200 600
0 400
25 45 65 85 105 125
200
Ambient Temperature: Ta (℃)
0
25 45 65 85 105 125
Ambient Temperature: Ta (℃)
周囲温度Ta(℃)
178
_____________________________________________________________________________________________________ ●
Power dissipation data for the USP-10B03 is shown in this Power dissipation data for the USP-12B01 is shown in this page.
The value of power dissipation varies with the mount board conditions.
page. Please use this data as the reference data taken in the following
Please use this data as the reference data taken in the condition.
following condition. 1. Measurement Condition
Condition: Mount on a board
Ambient: Natural convection
1. Measurement Condition Soldering: Lead (Pb) free
Condition: Mount on a board Board Dimensions: 40 x 40 mm (1600 mm2 in one side)
Ambient: Natural convection Board: Inner two metal layers, no large metal area in the
front and back.
Soldering: Lead (Pb) free Copper Area: 1st Inner Metal Layer about 50%
2 2nd Inner Metal Layer about 50%
Board: Dimensions 40mm×40mm (1600mm in one side)
Each Heatsink back metal is connected to the inner
Copper (Cu) traces occupy 50% of the board area layers respectively.
in top and back faces. Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Package hear-sink is tied to the copper traces. Through-hole: 2 x 0.8 Diameter
Material: Glass Epoxy (FR-4) (One through-hole connection per one heatsink
back metal)
Thickness: 1.6mm
Through-hole: 4 x 0.8 Diameter
1) 1ch Operation
1000
100
Power Dissipation: Pd(mW)
1000
800
0
600
25 45 65 85 105 125 400
Ambient Temperature: Ta (℃) 200
0
25 45 65 85 105 125
Ambient Temperature:Ta(℃)
179
27. Reference Pattern Layout Dimensions, Package Power Dissipation _____________________________
Power dissipation data for the USPN-4 is shown in this page. Power dissipation data for the USPN-4B02 is shown in this page.
The value of power dissipation varies with the mount board The value of power dissipation varies with the mount board
conditions. conditions.
Please use this data as the reference data taken in the Please use this data as the reference data taken in the
following condition. following condition.
28.9 28.9
27. Reference Pattern Layout Dimensions, Package Power Dissipation
Pd vs Ta
Pd vs Ta
700 600
Power Dissipation Pd (mW)
Power Dissipation: Pd(mW)
600 500
500 400
400
300
300
200
200
100 100
0 0
25 45 65 85 105 125 25 45 65 85 105 125
Ambient Temperature: Ta(℃) Ambient Temperature Ta (℃ )
180
_____________________________________________________________________________________________________ ●
Power dissipation data for the USPN-6 is shown in this page. Power dissipation data for the USPQ-4B03 and USPQ-4B04 are
The value of power dissipation varies with the mount board shown in this page.
conditions. The value of power dissipation varies with the mount board
Please use this data as the reference data taken in the conditions.
following condition. Please use this data as the reference data taken in the
following condition.
1. Measurement Condition
Condition : Mount on a board 1. Measurement Condition
Ambient : Natural convection Condition: Mount on a board
Soldering : Lead (Pb) free Ambient: Natural convection
2
Board : Dimensions 40mm x 40 mm (1600mm ) Soldering: Lead (Pb) free
2
Copper (Cu) traces occupy 50% of the front Board: 40 x 40 mm (1600mm )
and 50% of the back. 4 Copper Layers
VSS pin is tied to the copper traces. Each layer is connected to the package
Material : Glass Epoxy (FR-4) heat-sink and terminal pin No.1.
2
Thickness : 1.6mm Each layer has approximately 800mm
Through-hole : 4 x 0.8 Diameter copper area.
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter
Board Mount (Tj max = 125℃) 2. Power Dissipation vs. Ambient temperature
Ambient Power Dissipation Thermal
Temperature (℃) Pd (mW) Resistance (℃/W) Board Mount (Tj max = 125℃)
25 600 Ambient Power Dissipation Thermal
166.67
85 240 Temperature (℃) Pd (mW) Resistance (℃/W)
25 550
181.82
85 220
Pd vs Ta
600
Power Dissipation Pd (mW)
500
400
300
200
100
0
25 45 65 85 105 125
Ampient Temperature Ta (℃)
181
27. Reference Pattern Layout Dimensions, Package Power Dissipation ___________________________ ●
1. Measurement Condition
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
2
Board: 40mm×40mm(1600mm in one side)
st
Metal Area: 1 Metal Layer about 50%
nd
2 Inner Metal Layer about 50%
rd
3 Inner Metal Layer about 50%
th
4 Metal Layer about 50%
4 separations is each layer connected to each pin
Material: Glass Epoxy(FR-4)
Thickness: 1.6mm
Through-hole: 4 x 0.8 Diameter
40.0
2.5
2.54
1.4
27. Reference Pattern Layout Dimensions, Package Power Dissipation
40.0
28.9
28.9
Pd vs. Ta
Power Dissipation: Pd (mW)
182
Global
Network
TOREX SEMICONDUCTOR
—supplying cutting edge,
high performance power supply ICs
to every corner of the world.
1. The products and product specifications contained herein are subject to change
without notice to improve performance characteristics. Consult us, or our
representatives before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
A specialist in Analog power supply IC design,
3. Please ensure suitable shipping controls (including fail-safe designs and aging
development and manufacturing. protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges. Should you
TOREX SEMICONDUCTOR
Marketing & was established in 1995 and Torex wish to use the products under conditions exceeding the specifications, please consult
Quality
Management
Earning Customers trust with the world’s
highest levels of quality control
and environmentally friendly products.