Professional Documents
Culture Documents
Sealant
Sealant
Sealant
Discipline : Structural
Signature
Attachment/Additional NA
Files/Documents (if any)
Revision History:
Rev. Remarks
Date Status TRSDC Reference No Description
No.
R10-H10C02-GRR-MAT- H10-New Assembly Facility -
00 11-03-2022 Revise & Resubmit
ST-0031 Material Submittal for Sealant
General Information
R10-H10C02-GRR-
Contractor Grankraft Construction LLC Submittal No.
MAT-ST-0031 Rev. 01
H10C02 GRR - OSM Shell & Core
Contract No. Date 20-Apr-22
works
Approved Subcontractor
To the Engineer The Red Sea Development Company NIL
(as applicable)
Material Information
Material Description
Sealant
(One item only per Form)
Manufacturer/Supplier
Company Name Henkel Polybit Industries Locally Manufactured YES
Address Dubai, UAE
Local Agent Other Details
Program Date Expected Arrival Date
(Material Required on Site) (on Site)
Contractor’s
Engineer’s - Comments
Comments:
Status Code
DATE: 22-04-2022
AUTHORITY APPROVAL STAMP
E=350288.644 E=350300.102 E=350311.558
N=2817644.095 N=2817662.875 N=2817681.657
E=350283.436 E=350306.352 E=350323.017
E=350294.894 N=2817673.119 E=350317.807 N=2817700.437
PLOT LIMIT
N=2817635.558
PLOT LIMIT N=2817654.339 N=2817691.902
C B A
4000
4000
4000
2000 6000 2000 2000 6000 2000 2000 6000 2000 2000 6000 2000
PUMP ROOM
KEY PLAN
+0.150 FFL
+0.150 FFL
+0.150 FFL
+0.150 FFL
ZONE 1
25616
25616
400MM THK.
CONCRETE SLAB
CARRIAGE WHEELS
SLOTS
EJ EJ EJ EJ EXPANSION JOINT
-
A A A A
- - - -
22035
22035
+0.150 FFL
+0.150 FFL
+0.150 FFL
+0.150 FFL
ZONE 2
EJ EJ EJ EJ
1
GENERAL NOTES
ZONE 3A
2
22035
1. DO NOT SCALE FROM DRAWINGS. DIMENSIONS GOVERN.
3
135794
135794
135794
135794
158115 O/O OF PLOT #(HD-19)
EJ EJ EJ EJ
4
ZONE 3B
22035
COORDINATION TRACKER
5
REV VER DESCRIPTION DATE & TIME OF PRINT
FORMAL ISSUE
EJ EJ EJ EJ
6
+0.150 FFL
+0.150 FFL
+0.150 FFL
+0.150 FFL
ZONE 3C
7
EXPANSION JOINT DOWEL BARS,16mm.Øx550mm.
22035
400
EJ EJ EJ EJ BOT. OF CONCRETE
C1 03-03-2022 ISSUED FOR APPROVAL SKV-ATR
LVL -0.250m. BOT. OF CONCRETE
225 20 LVL -0.325m. REV DATE ISSUED TO DESCRIPTION DRW-CHK-APP
200 75
9
SHOP DRAWINGS
SEPTIC TANK
ZONE 3D
R10 TRSDC
CLIENT:
10
EMAIL: info@killadesign.com
WEB: www.killadesign.com
desi gn
126491 O/O OF PLOT #(HD-19)
SUPERVISION CONSULTANT:
50
200 100
120 120
PROJECT:
Hotel 10 - New Assembly & OSM MEP & OSM
Fit Out Facility at Hamriyah, U.A.E.
200 75
1. Technical Information
i. Data Sheet
ii. Method Statement
iii. Material Safety Data Sheet
2. Test Report
3. Approvals
4 . Company Information
i. Trade License
ii. Industrial License
iii. ISO Certificate
iv. Company Profile
Polyprime PS
Primer for porous joints
Seals the joint surface and increase the adhesion with the joint sealant.
CHARACTERISTICS
► Strengthens the adhesion of joint sealants to porous
surfaces such as concrete, cement brickwork, gypsum
board, timber and stone
► Stabilizes and seals joint surface particularly in harsh
environments such as areas subjected to heavy traffic,
saline water, fuel or oil spillage areas
TDS_Polyprime PS_GCC_1021
► Does not Contain Asbestos, Chromated Copper
Arsenate and Lead
adhesion
1K
one component
promoter
DESCRIPTION
Polyprime PS is a single component solvent based adhesion
promoting primer for movement and control joints in
porous substrates like concrete, block work, asbestos and
1
timber. The primer forms a chemical bridge between the uniform coat. The sealant shall be applied only after the
concrete surface and the sealant which is applied into the primer becomes tackfree. A recoat of the primer is required
joint. to be applied on the surfaces if the sealant application
FIELDS OF APPLICATION gets delayed by more than 3 hours after application of the
primer. For obtaining a clean and neat finish, masking tape
– concrete & mortar shall be applied on both the edges of the groove before
– brick work applying the primer and shall be removed once the sealant
– asbestos installation is complete.
– timber CLEANING
APPLICATION INSTRUCTIONS Clean all tools with Polysolvent immediately after use.
Hardened materials can be removed mechanically only.
Joint preparation
The joint surface must be clean, dry and free from oil, COVERAGE
loose particles, cement laitance and other contaminants
Depth [mm] Width [mm]
which may affect the adhesion. A thorough wire brushing,
grinding, sand blasting or solvent cleaning may be required 10 15 20 25 30
to expose a clean and sound substrate. On painted 10 250 225 200
surfaces all loosely adhering paint must be removed 15 175 150 140 130
(contamination will reduce the strength of the bond), if
20 130 120 110
in doubt remove all previous decorations. To optimize
adhesion of both the primer and the sealant, remove all 25 100 95
round or sharp edges and corners. Ensure that the surface 30 80
is absolutely dry before the primer is applied. Linear meter of joint per litre of primer:
Application # Calculation based on theoretical coverage. Actual
Polyprime PS shall be applied to clean, dry surface prior material consumption at site will vary depending on the
to the installation of backer rod or bond breaking tape. wastage.
Polyprime PS can be applied by a brush in one thin and
213
STORAGE & SHELF LIFE TECHNICAL SPECIFICATION
Store in a cool, dry place and keep away from all sources PROPERTIES VALUES TEST
of heat and sunlight. In tropical climates, store in air STANDARDS
condition rooms. The shelf life is up to 12 months in un-
Appearance Viscous clear liquid -
opened conditions and if stored as per recommendations.
Excessive exposure to sunlight, humidity and UV will result Density, [g/cc] 0.95±0.05 ASTM D 1475
in the deterioration of the quality of the product and reduce Drying time, [minutes] Approx.30 -
its shelf life. Application
temperature, [°C] 5 to 40 -
HEALTH & SAFETY
All values given are subject to 5-10% tolerance
Highly flammable liquid. Do not apply near smoke or
naked flame. In case of fire, extinguish with carbon dioxide, SUPPLY
dry chemical or foam fire extinguisher. Due to the presence
of solvents, ensure adequate ventilation is provided in the Polyprime PS 1L
workplace. As with all chemical products, caution should
Apart from the information given here it is also important to observe the relevant
always be exercised. Protective clothing, such as gloves guidelines and regulations of various organisations and trade associations as
and goggles should be worn. Treat any splashes to the well as the respective standards. The aforementioned characteristics are based
skin or eyes with fresh water immediately. Should any of on practical experience and applied testing. Warranted properties and possible
uses which go beyond those warranted in this information sheet require our
the products be accidentally swallowed, do not induce written confirmation. All data given was obtained at an ambient and material
vomiting, but call for medical assistance immediately. temperature of +23°C and 50 % relative air humidity at laboratory conditions
unless specified otherwise. Please note that under other climatic conditions
Ensure the container is available for the medical attendant hardening can be accelerated or delayed.
to examine any relevant instructions and content details. The information contained herein, particularly recommendations for the
handling and use of our products, is based on our professional experience.
As materials and conditions may vary with each intended application, and
TDS_Polyprime PS_GCC_1021
thus are beyond our sphere of influence, we strongly recommend that in each
case sufficient tests are conducted to check the suitability of our products
for their intended use. Legal liability cannot be accepted on the basis of the
contents of this data sheet or any verbal advice given, unless there is a case
of wilful misconduct or gross negligence on our part. This technical data sheet
supersedes all previous editions relevant to this product.
CHARACTERISTICS
► Highly resilient with excellent recovery characteristics
► Provides permanent and uniform watertight seal
► Excellent adhesion to most building substrates. Can be
used without the use of primer in new substrates
► Non-toxic. Can be used in potable water reservoirs and
swimming pools
TDS_Polyseal 1PU_GCC_1021
► Easy to apply, one component sealant. No mixing required
► Overpainting can be done (Rigid paints may crack)
low modulus
DESCRIPTION
Polyseal 1PU is a one part low modulus high performance
polyurethane sealant, which cures on absorption of
1
atmospheric moisture to form a firm and flexible rubber
watertight seal for moderate movement and control joints. Priming
Polyseal 1PU can be used in both horizontal and vertical On new substrates, the sealant can be applied without Primer.
applications. The sealant has a Movement Accomodation However, for old and very porous substrates apply Polyprime
Factor (MAF) of ±25%. PS*. When applying on aluminium and metal surfaces, ensure
Fields of application the surface is cleaned of all lacquer or protective coatings.
Galvanized, copper and stainless steel surfaces shall be
– concrete expansion joints primed with Polyprime NP*.
– precast concrete cladding
Back-Up Material
– brick cladding A bond breaking backing rod (Polyrod)* shall be inserted into
– perimeter caulking (windows, doors, aluminium frames) all movement joints to avoid a three sided adhesion. A bond
– expansion and constructions joints in water retaining breaking tape may be applied to joints where the depth does
structures not allow the application of the backing rod.
– curtain wall joints
APPLICATION
– parapet walls
Polyseal 1PU is available in a ready to use self contained
APPLICATION INSTRUCTIONS sausage which can be loaded onto a barrel gun. Start
extruding the sealant into the joint firmly by maintaining an
Joint preparation even pressure on the trigger of the gun. On vertical joints,
The joint edges must be clean, dry and free from oil, loose sealant extrusion shall start from the bottom of the joint and
particles, cement laitance and other contaminants which may continued to the top. Once the sealant has been installed a
affect the adhesion. A thorough wire brushing, grinding, sand suitable rounded tool can be used to achieve a smooth hour
blasting or solvent cleaning may be required to expose a clean glass profile. DO NOT USE SOAPY WATER SOLUTION. Any
and sound substrate. When applied on glazed surfaces like masking tape applied should be removed immediately after
ceramic or terrazzo tiles or porcelain enamel joint surfaces, the the sealant is installed.
glaze should be removed by abrading with sandpaper or wire
brush.
203
CLEANING HEALTH & SAFETY
Remove all excess sealant with a scraper. Any spillage can be As with all construction chemical products caution should be
cleaned using Polysolvent. Clean all tools and equipments exercised. Adequate ventilation should be provide at the place
using similar solvent immediately after the tooling. Hardened of work. Refer the product MSDS for full details. Protective
materials can be removed mechanically only. clothing such as impervious gloves and goggles should be
worn. Treat any splashes to the skin or eyes with fresh water
LIMITATIONS immediately. Should any of the products be accidentally
Polyseal 1PU is not recommended for: swallowed, do not induce vomiting, but call for medical
– Movement joints having MAF >25% assistance immediately.
– Damp and contaminated surfaces SUPPLY
– Asphalt pavements
– When overpainting check paint compatibility with sealant Polyseal 1PU 600ml (12 sausages/carton)
– External application with white / off white colour will result Polyprime PS 1L pail
in yellowing on exposure to UV. Polyprime NP 1L pail
– Joints width > 25mm Polysolvent 5L & 20L pails
Ancillaries/equipments Polyrod, barrel gun
JOINT DESIGNS
* Refer to website for TDS
The width of the joint should be a minimum of 4 times the
anticipated movement. Joints with cyclic movement should TECHNICAL SPECIFICATION
have a width to depth ratio of 2:1 for butt joints and 1:1
for static and lap joints. The joint depth shall not exceed the PROPERTIES VALUES TEST
width. The joint width and depth should be maintained as STANDARDS
recommended: Color White/offwhite
TDS_Polyseal 1PU_GCC_1021
CHARACTERISTICS
► Controls joint depths and ensures a proper width to
depth ratio
► Non absorbent surface eliminates three sided adhesion
of the elastomeric sealant
► Forces sealant to have maximum sidewall adhesion
► Closed cell structure does not allow the absorption of
moisture or air
► Lightweight and compressible. Can easily be
TDS_Polyrod_GCC_0118
accommodated in joints of varying widths
► Highly resilient. Accommodates dynamic joints
► Chemically inert
► Fully compatible with a wide variety of sealants
► Non-staining
► Rot proof
1
of wilful misconduct or gross negligence on our part. This technical data sheet
supersedes all previous editions relevant to this product.
METHOD STATEMENT
POLYSEAL 1 PU
The performance of the material is always dependent on substrate conditions during the
application. So, the following work conditions are to be followed for the optimum
performance of the Product.
APPLICATION INSTRUCTIONS:
Surface Preparation:
1. The substrate where the sealant will be applied should be clean, dry and sound.
Remove all dirt, laitance, grease, oil, traces of curing compound and all other
contaminants. Sand/grit blasting is recommended for cleaning the surface of all such
deleterious materials. Use a vacuum or blower to remove all the dust or debris from the
joint after the surface cleaning.
2. Joint edge repairs are to be carried out with a suitable repair mortar from the Polycrete
range.
3. In expansion joints, the filler board is to be cut and cleaned properly and a
compressible backing rod (closed cell polyethylene) of the suitable dimension is to be
inserted into the joint up to the designed depth, ensuring that there is no gap or void left
at the base of the joint.
4. For construction or contraction joints, a bond breaker or back up tape is recommended,
but in joints where hydrostatic pressure exists, only bond breaking tapes must be used.
5. Apply a masking tape on either side of the joint, so that the material during application
does not spill over and spoil the aesthetics of the joint.
6. Depth of joint shall be minimum half the width of joint.
7. Polyseal Pu is not recommended for movement joints having MAF >25%
MS_POLYSEAL 1 PU_GCC_0917_GR0
Priming:
1. All prepared joints are to be primed with Polyprime PS. The primer is to be applied
with a hard brush on the two sides of the joint.
2. For non-porous substrates, such as glass or steel Polyprime NP is recommended for
optimum adhesion.
3. The primer should be allowed to become tack free prior to the application of the sealant.
In case the application is delayed for more than 6 hours recoating is to be done.
Application:
1. Cut the tip of the Polyseal 1PU sausage. Load the sausage inside the barrel gun.
2. Gun the sealant into the joint firmly ensuring that there is no gap or void in between the
sealant and the backing rod. For application in vertical joints the filling should start from
the bottom and continued to the top. After the sealant, has been filled into the joint, use
a scrapper to remove the excess quantity and tool the surface with suitable tooling
equipment. It is recommended to dip the tooling equipment into a soap water solution
prior to tooling, so that a smooth surface and neat surface is achieved.
3. After the application of the sealant immediately remove the masking tape from the sides
of the joints.
4. Remove all excess sealant with a scraper. Any spillage can be cleaned using
Polysolvent.
5. Clean all tools with the cleaning solvent immediately after use.
6. The skinning time will be 24 hours. However, the sealant will achieve its full cure within
7 days.
Safety Data Sheet according to Regulation (EC) No 1907/2006
Page 1 of 8
SDS No. : 632485
SF SEALANT PU GREY PRINTED V001.0
Revision: 11.04.2018
printing date: 07.05.2020
Replaces version from: -
HAAD Poison and Drug Information Center UAE, TOLL FREE TEL. NUMBER 800-424
Classification (CLP):
The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).
The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).
General information:
In case of adverse health effects seek medical advice.
Inhalation:
Move to fresh air, consult doctor if complaint persists.
Skin contact:
Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.
Eye contact:
Rinse immediately with plenty of running water, seek medical advice if necessary.
Ingestion:
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
4.2. Most important symptoms and effects, both acute and delayed
No data available.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
Valid for
Utd.Arab.Emir.
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Calcium carbonate 10 Time Weighted Average DB OEL
471-34-1 (TWA):
[CALCIUM CARBONATE, INHALABLE
DUST]
Calcium carbonate 4 Time Weighted Average DB OEL
471-34-1 (TWA):
[MARBLE, RESPIRABLE
LIMESTONE, RESPIRABLE]
Calcium carbonate 4 Time Weighted Average DB OEL
471-34-1 (TWA):
[CALCIUM CARBONATE, RESPIRABLE
DUST]
Calcium carbonate 10 Time Weighted Average DB OEL
471-34-1 (TWA):
[MARBLE, TOTAL INHALABLE
LIMESTONE, TOTAL INHALABLE]
Titanium dioxide 10 Time Weighted Average UAE OEL
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Titanium dioxide 4 Time Weighted Average DB OEL
13463-67-7 (TWA):
[TITANIUM DIOXIDE, RESPIRABLE]
Titanium dioxide 10 Time Weighted Average DB OEL
13463-67-7 (TWA):
[TITANIUM DIOXIDE, TOTAL
INHALABLE]
Titanium dioxide 10 Time Weighted Average AD TLV
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Titanium dioxide 10 Time Weighted Average GCC TLV
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
SDS No.: 632485 V001.0 SF SEALANT PU GREY PRINTED Page 4 of 8
Valid for
Bharain
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Titanium dioxide 10 Time Weighted Average BH TLV
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Titanium dioxide 10 Time Weighted Average GCC TLV
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Valid for
Egypt
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Calcium carbonate 10 Time Weighted Average EG OEL
471-34-1 (TWA):
[CALCIUM CARBONATE (INCLUDING
LIMESTONE AND MARBLE), TOTAL
DUST CONTAINING NO MORE THAN
1% CRYSTALLIZED SILICA AND NO
ASBESTOS]
Titanium dioxide 10 Time Weighted Average EG OEL
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Valid for
Jordan
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Titanium dioxide 100 375 Time Weighted Average JO TLV
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Titanium dioxide 450 560 Short Term Exposure JO TLV
13463-67-7 Limit (STEL):
[TITANIUM DIOXIDE]
Valid for
Kuwait
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Calcium carbonate 10 Time Weighted Average KW OEL
471-34-1 (TWA):
[MARBLE (CALCIUM CARBONATE),
TOTAL]
Calcium carbonate 5 Time Weighted Average KW OEL
471-34-1 (TWA):
[MARBLE (CALCIUM CARBONATE),
INHALED]
Calcium carbonate Harmful Concentration for Unknown KW OEL
471-34-1 risk to health and life:
[MARBLE (CALCIUM CARBONATE),
INHALED]
Calcium carbonate Harmful Concentration for Unknown KW OEL
471-34-1 risk to health and life:
[MARBLE (CALCIUM CARBONATE),
TOTAL]
SDS No.: 632485 V001.0 SF SEALANT PU GREY PRINTED Page 5 of 8
Valid for
Israel
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Titanium dioxide 10 Time Weighted Average IL OEL
13463-67-7 (TWA):
[TITANIUM DIOXIDE]
Valid for
Kenya
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Calcium carbonate 5 Time-weighted average KE OEL-RL
471-34-1 (TWA) OEL-RL:
[MARBLE RESPIRABLE DUST
CALCIUM CARBONATE RESPIRABLE
DUST
LIMESTONE RESPIRABLE DUST]
Calcium carbonate 10 Time-weighted average KE OEL-RL
471-34-1 (TWA) OEL-RL:
[MARBLE TOTAL INHALABLE DUST
LIMESTONE TOTAL INHALABLE DUST
CALCIUM CARBONATE TOTAL
INHALABLE DUST]
Titanium dioxide 5 Time-weighted average KE OEL-RL
13463-67-7 (TWA) OEL-RL:
[TITANIUM DIOXIDE RESPIRABLE
DUST]
Titanium dioxide 10 Time-weighted average KE OEL-RL
13463-67-7 (TWA) OEL-RL:
[TITANIUM DIOXIDE TOTAL
INHALABLE DUST]
Respiratory protection:
Not needed.
Hand protection:
Not needed.
Eye protection:
Not needed.
SDS No.: 632485 V001.0 SF SEALANT PU GREY PRINTED Page 6 of 8
12.1. Toxicity
No data available.
No data available.
No data available.
No data available.
No data available.
Waste code
080410
SDS No.: 632485 V001.0 SF SEALANT PU GREY PRINTED Page 8 of 8
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
VOC content 0%
(VOCV 814.018 VOC regulation
CH)
Further information:
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is
intended to describe our products from the point of view of safety requirements and is not intended to guarantee any
particular properties.
The product is intended for industrial use.
Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document.
Corresponding text is displayed in a different color on shadowed fields.
Safety Data Sheet according to Regulation (EC) No 1907/2006
Page 1 of 8
SDS No. : 633691
Polyrod V001.0
Revision: 20.04.2018
printing date: 22.05.2018
Replaces version from: -
Utd.Arab.Emir.
psra.imea@henkel.com
HAAD Poison and Drug Information Center UAE, TOLL FREE TEL. NUMBER 800-424
Classification (CLP):
The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).
The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).
General information:
In case of adverse health effects seek medical advice.
Inhalation:
Move to fresh air, consult doctor if complaint persists.
Skin contact:
Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.
Eye contact:
Rinse immediately with plenty of running water, seek medical advice if necessary.
Ingestion:
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
4.2. Most important symptoms and effects, both acute and delayed
No data available.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
Valid for
Utd.Arab.Emir.
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Polyethylene 10 Time Weighted Average DB OEL
9002-88-4 (TWA):
[DUST, INHALABLE DUST]
Polyethylene 4 Time Weighted Average DB OEL
9002-88-4 (TWA):
[DUST, RESPIRABLE DUST]
SDS No.: 633691 V001.0 Polyrod Page 4 of 8
Valid for
Bharain
None
Valid for
Egypt
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Polyethylene 10 Time Weighted Average EG OEL
9002-88-4 (TWA):
[DUSTS (NOT OTHERWISE SPECIFIED)
CONTAINING LESS THAN 1% QUARTZ,
TOTAL DUST]
Polyethylene 3 Time Weighted Average EG OEL
9002-88-4 (TWA):
[DUSTS (NOT OTHERWISE SPECIFIED)
CONTAINING LESS THAN 1% QUARTZ,
INHALABLE DUST]
Valid for
Jordan
None
Valid for
Kuwait
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Polyethylene Harmful Concentration for Unknown KW OEL
9002-88-4 risk to health and life:
[PARTICULATES, INHALED]
Polyethylene 15 Time Weighted Average KW OEL
9002-88-4 (TWA):
[PARTICULATES, TOTAL]
Polyethylene Harmful Concentration for Unknown KW OEL
9002-88-4 risk to health and life:
[PARTICULATES, TOTAL]
Polyethylene 5 Time Weighted Average KW OEL
9002-88-4 (TWA):
[PARTICULATES, INHALED]
Valid for
Israel
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Polyethylene 10 Time Weighted Average IL OEL
9002-88-4 (TWA):
[PARTICLES (INSOLUBLE OR POORLY
SOLUBLE) NOT OTHERWISE
SPECIFIED, INHALABLE PARTICLES]
Polyethylene 3 Time Weighted Average IL OEL
9002-88-4 (TWA):
[PARTICLES (INSOLUBLE OR POORLY
SDS No.: 633691 V001.0 Polyrod Page 5 of 8
Valid for
Kenya
None
Respiratory protection:
Not needed.
Hand protection:
Not needed.
Eye protection:
Not needed.
12.1. Toxicity
No data available.
No data available.
No data available.
No data available.
No data available.
Product disposal:
Dispose of waste and residues in accordance with local authority requirements.
Waste code
080410
14.1. UN number
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
VOC content 0%
(VOCV 814.018 VOC regulation
CH)
Further information:
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is
intended to describe our products from the point of view of safety requirements and is not intended to guarantee any
particular properties.
The product is intended for industrial use.
Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document.
Corresponding text is displayed in a different color on shadowed fields.
:اﻟﻤﺮﺟﻊDM042020-322549 :اﻟﺘﺎﻳﺦ٢٠٢٠/٠٤/١٨
ص.ب239/.
ً
ﺑﺪاﻳﺔ أﻃﻴﺐ اﻟﺘﺤﻴﺎت ،وﻧﻮد اﻹﺷﺎرة إ اﻟﻤﻮﺿﻮع اﻟﻤﺬﻛﻮر أﻋﻼه ،ﻧﻔﺪﻳﻜﻢ ﻋﻠﻤﺎ ً ﺑﺄﻧﻨﺎ ﻗﻤﻨﺎ ﺑﺪراﺳﺔ اﻟﻮﺛﺎﺋﻖ اﻟﻤﻘﺪﻣﺔ ﻧﻬﺪﻳﻜﻢ
ﻣﻦ ﻗﺒﻠﻜﻢ وﻻ ﻣﺎﻧﻊ ﻟﺪﻳﻨﺎ ﻣﻦ ﺗﺠﺪﻳﺪ اﻋﺘﻤﺎد اﻟﻤﻮاد اﻟﻤﺪرﺟﺔ واﻟﻤﻨﺘﺠﺔ ﻣﻦ ﻗﺒﻞ ﺷﺮﻛﺘﻜﻢ ﻋﻠﻰ أن ﺗﺘﻮاﻓﻖ ﻣﻮاﺻﻔﺎﺗﻬﺎ
ﻣﻊ ﻣﻮاﺻﻔﺎت اﻟﺒﻠﺪﻳﺔ وﺣﺴﺐ اﻻﺣﺘﻴﺎﺟﺎت اﻟﻔﻨﻴﺔ ﻟﻠﻤﺸﺎﻳﻊ ﻋﻠﻤﺎ ً ﺑﺄن ﻫﺬه اﻟﻤﻮاﻓﻘﺔ ﺳﺘﻜﻮن ﻟﻤﺪة ﻋﺎﻣﻴﻦ ﻓﻘﻂ ﻗﺎﺑﻠﺔ
ﻟﻠﺘﺠﺪﻳﺪ ﺣﺎل اﺳﺘﻴﻔﺎء ﻛﻞ اﻟﺸﺮوط اﻟﻤﻄﻠﻮﺑﺔ.
اﻟﻤﻮاد اﻟﻤﻌﺘﻤﺪة:
PQ202001160027: Bituplus, Bituboard, Polyshield HD, Polystop, Hydroseal P, Polyboard,
.Bitustick, Polyseal, Bitumastic, Polystop
Legal Type Branch of Company Registered in other emirates فرع لشركة مقرها في امارة أخرى الشكل القانونى
Expiry Date 17/04/2022 تاريخ النتهاء Issue Date 18/04/2019 تاريخ الصدار
® D&B D-U-N-S 0 الرقم العالمي Main License No. 833589 رقم الرخصة الم
No.
Register No. رقم السجل التجارى DCCI No. 320020 عضوية الغرفة
100.00% مالك Co. Owner / United Arab Emirates / هنيكل بولي بت للصناعات المحدودة ذ.م.م 929197
الشركة المارات
HENKEL POLYBIT INDUSTRIES
LIMTED
مدير Manager / هولندا Netherlands / هارم بيتروس انطونيوس بيترز 878941
HARM PETRUS ANTONIUS PETERS
Print Date 20/04/2021 12:06 تاريخ الطباعة Receipt No. 13887901 رقم اليصال
يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة ،أرسل رقم الرخصة إلى ( 6969دو/اتصالت) للحصول
على اذن الدفع. Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message )SMS(. Send your trade year
license number to 6969 )Du/ Etisalat( to receive payment voucher. احصل على زوهو ون مجانا d
للسنة الولى
Zoho.com/ded
وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية .لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع www.dubaided.gov.ae
Approved electronic document issued without signature by the Department of Economic Development. To verify the
license kindly visit www.dubaided.gov.ae
Industrial License
License Details
License Number 107
Address Details
Lease Contract Number TC - 16950
Property Owner Ahmed Mohamed Salim
Almelaihi Al-Ali
Region Umm Thaob 7 7
Street undefined
Telephone 0508919999 Mobile 0508919999
P.O.Box 0000909 Email ahmed@linkrealestate.ae
License Members
0%
Manager Netherlands HARM PETRUS ANTONIUS PETERS
. . .
51%
Partner United Arab Emirates Links Solstice Brokers L.L.C
49%
Partner Germany Henkel KGAA company
"http://ded-e.uaq.ae"
Page 1/2 TEL +971 6 7064000 * UMM AL QUAIN, UAE * P.O.BOX 1333 .
Commercial License ﺭﺧـﺼــــــﺔ ﺗﺠﺎﺭﻳﺔ
Emerging Economic Establishment ﻣﻨﺸــــﺄﺓ ﺍﻗﺘﺼـــﺎﺩﻳــــﺔ ﻧﺎﺷﺌـــــــﺔ
http://www.ded.abudhabi.ae ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺍﻟﺮﺧﺼﺔ ﺑﺮﺟﺎﺀ ﺯﻳﺎﺭﺓ ﺍﻟﻤﻮﻗﻊ. ﺃﺑﻮﻇﺒﻲ- ﻭﺛﻴﻘﺔ ﻣﻌﺘﻤﺪﺓ ﻭﺻﺎﺩﺭﺓ ﺑﺪﻭﻥ ﺗﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ ﻣﻦ ﺩﺍﺋﺮﺓ ﺍﻟﺘﻨﻤﻴﺔ ﺍﻹﻗﺘﺼﺎﺩﻳﺔ
Approved document issued without signature or stamp by the Department of Economic Development - Abu Dhabi. To verify the
license kindly visit http://www.ded.abudhabi.ae
Official Email : sanabel.khalil@henkel.com : ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﺍﻟﺮﺳﻤﻲ
Official Mobile : 971501575004 : ﺭﻗﻢ ﺍﻟﺘﻮﺍﺻﻞ ﺍﻟﺮﺳﻤﻲ
*CR-3981257*
http://ded.abudhabi.ae
Henkel Polybit Industries Ltd.
PO Box: 293, Umm Al Quwain, UAE
Phone: +971 (6) 76 70 777
Fax: +971 (6) 76 70 197
henkelpolybit@henkel.com
www.henkelpolybit.com