Professional Documents
Culture Documents
Workshop-1 Lettering-Sketching
Workshop-1 Lettering-Sketching
Workshop-1 Lettering-Sketching
SEM I – 2021/2022
General Instructions
Draw border lines on your A3 papers at 10mm from the paper side.
Do NOT delete construction lines upon the completion of the sketch, but please make sure
that the construction lines are drawn lightly using only 0.3 mm pencil.
Uniform thickness and darkness of lines should be maintained throughout.
Please write your NAME, MATRIX, WORKSHOP TITLE AND DATE in the title block using these
letters and numerals format as well, at h = 3 – 4 mm. Therefore, the size of title block must
fit all your information.
Happy learning.
Part-A
Use only A3 paper for this part.
Draw the LETTERS and NUMERALS (follow exactly the example given in the figure below).
You need to repeat the letters and numerals twice. The first set with h = 10 mm and the
second set with h = 5 mm. Position each set evenly and neatly to occupy the paper space.
Use ruler to draw thin and blur grid lines.
Freehand sketch all letters and numerals.
Refer to notes below for more elaboration and guideline about letters and numbers.
Part-B
Use only A3 paper for this part.
Freehand sketch the objects given using the estimated size given in each figure.
Write the title of each sketch, below it, using capital letters at height size of 3 mm.
Use 0.3 mm pencil to sketch construction line, but the final object line must use 0.5 or 0.7
mm pencil.
Try to fit a few sketches on each page. You can use as many A3 papers as you like.
The use of ruler is NOT allowed, unless directed in the specific question.
DO NOT delete construction lines. Just make sure all construction lines are thin and blur.
10 cm
1.0 cm
1. INCLINED LINES
Instruction:
* Use a ruler to draw a square of 10 cm x 10 cm using 0.5/0.7 mm pencil.
* Freehand sketch the lines in the box to completion. The gap between line is 1.0 cm.
* Use 0.5/0.7 mm pencil to sketch the lines 1
Sketching
2. CIRCLE
Diameter = 50 mm
Instruction:
(1) Use 0.3 mm pencil to sketch all construction lines.
(2) Freehand sketch a circle in the square box using 0.5/0.7 mm pencil.
2
Sketching
3. ELLIPSE
6 cm
4 cm
Instruction:
(1) Use 0.3 mm pencil to sketch all construction lines.
(2) Freehand sketch an ellipse in the box using 0.5/0.7 mm pencil.
3
Sketching
4. ISOMETRIC VIEW
Instruction:
1) Use 0.3 mm pencil to sketch all construction
lines.
2) Freehand sketch this object using 0.5/0.7 mm
pencil.
3) Roughly estimate the size based on dimensions
given.
4 cm
8 cm
4
5. ORTHOGRAPHIC VIEW
5 cm
4 cm
Instruction:
1) Use 0.3 mm pencil if you need to
sketch construction lines.
2) Freehand sketch this orthographic
blocks 0.5/0.7 mm pencil.
3) Roughly estimate the size based on
dimensions given.
4) Must align each accordingly, block as
what you see .
Sketching
6. LINES AND CURVES
8 cm
Instruction:
1) Use 0.3 mm pencil if you need to
sketch construction lines.
2) Freehand sketch this orthographic
blocks 0.5/0.7 mm pencil.
3) Roughly estimate the size based on
dimensions given.
4) Use 0.3 mm pencil to sketch all center
and hidden lines (the dotted line).
5 cm
6
Sketching
7. ISOMETRIC ELLIPSE
Instruction:
1) Use 0.3 mm pencil if you need to sketch construction lines.
2) Freehand sketch this isometric ellipse using 0.5/0.7 mm pencil.
3) Roughly estimate the size based on dimensions given.
7
Sketching
8. IRREGULAR SHAPE (SHAFT HANGER)
Instruction:
1) Use 0.3 mm pencil to sketch construction lines.
2) Freehand sketch this irregular shape object using 0.5/0.7 mm pencil.
3) Roughly estimate the size based on the dimension given. Must
maintain the proportion size and shape of the object.
8