Professional Documents
Culture Documents
masonite manual de instalación puerta plegable
masonite manual de instalación puerta plegable
masonite manual de instalación puerta plegable
3 8 12
Install track Adjust door Adjustment for 4-panel installation
Ensure that the pivot bracket in the On 4-panel installation, doors may be “snugged”
track is at the side which you prefer your doors to open for height
Lift door and independently, if desired. Drive a screw partially into
toward. Now, fasten the track along the center line of the the track at the center of the opening to act as a stop
header, using screws provided. remove bottom
pivot from jamb for the two snugger guides.
bracket. Rotate
TOP VIEW SIDE VIEW
4 the bottom pivot,
as required, to adjust
Tap in pivots to proper height. Rotate
Tap top pivots and clockwise to raise the door; counter-clockwise to
bottom pivot into lower it. Do not attempt to turn pivot while engaged
place. Several light in the jamb bracket.
taps directly on top
of the pivot should
seat it properly. Use a wood strip to conceal
Note: Universal pivots are also sold separately.
13 bifold hardware if desired.
8Ajuste la altura
3Instale el carril de la puerta
5Instale el soporte de la jamba 9Ajuste la puerta para ponerla a plomo los herrajes de la puerta Bifold