Professional Documents
Culture Documents
HD_MOS Study Guide Practice for Microsoft Powerpoint Exam MO
HD_MOS Study Guide Practice for Microsoft Powerpoint Exam MO
HD_MOS Study Guide Practice for Microsoft Powerpoint Exam MO
❑ Apply the Slice theme. Note that applying the - Chọn Themes/ Chọn theme tên Slice.
theme adds layouts that are part of the theme to
the existing slide master.
❑ On the slide master (not a slide layout), insert -Insert/ Picture/ Tìm tới hình cần chèn
the PowerPoint_1-1 image from the practice file thêm.
folder.
- Chọn hình và khung chứa nội dung/
❑ Position the image so that the top of the image
Vào thẻ Format Picture/ Align/ Align
aligns with the top of the content placeholder and
Top.
the right side of the image aligns with the right
Tương tự, chọn Hình và khung số trang/
side of the slide number placeholder.
Vào thẻ Format Picture/ Align/ Align
Right
❑ Point to each slide layout to display its name.
Rê chuột qua từng layout để xem tên
Delete the Name Card Layout, Title And Vertical
Text Layout, and Vertical Title And Text Layout layout và thực hiện Chuột phải/ Delele
slide layouts from the slide master. layout để xóa từ Slide Master
❑ Point to each slide layout to locate the one that
is applied to slides 2–4 of the presentation. - Tìm đến layout được áp dụng cho slide
Duplicate that slide layout. 2 – 4 để nhân đôi. Chuột phải/
white.
❑ Consider the changes required to make - View/ Black and white
The practice file for these tasks is in the Nghiên cứu tài liệu Study
MOSPowerPoint2019\Objective1 practice file folder. There is Guide trang 34 đến trang 36
no result file for this set of practice tasks because the tasks trước khi làm bài tập theo
don’t modify the presentation content. yêu cầu.
➤ Open the PowerPoint_1-3 presentation and do the
following:
❑ Review the presentation content, noting the slides that
contain speaker notes.
❑ Print full page slides of only slides 1–3, using the Color - File/ Print: Chọn các tùy
setting. chọn theo yêu cầu
❑ Print a full set of handouts (for all slides) with three slides - File/ Print/ Handouts/ 3
per page, using the Grayscale setting. slide/ Grayscale
❑ Print a set of speaker’s notes, double-sided if your printer - File/ Print/ Note Pages/
supports it, using the Pure Black And White setting. Pure Back and White
❑ Switch to Presenter View and move to slide 3. - Chuột phải chọn/ Presenter
View
❑ Select the pen, set the ink color to Blue, and then
- Click vào nút Pen ở chế độ trình
underline the word shared on slide 3.
chiếu và thực hiện theo các yêu
❑ Erase the line under the word shared, and then
cầu đề bài.
underline the word vision.
❑ Select the highlighter, set the ink color to Light
Green, and then highlight the words unique and
successful.
❑ Move to slide 6. Use a red pen to draw one circle
around the two instances of External and another circle - Nhấn 6+ Enter hoặc Chuột phải/
around the word internal. Chọn Show All Slides/ Chọn slide
❑ End the slideshow and retain the annotations. 6. Và thực hiện thao tác theo đề
❑ Assign the password P@ssw0rd to the - File/ Save As/ Chọn vị trí lưu trữ/
presentation so that the file can be opened but not Tools: Nghiên cứu các tùy chọn lưu
changed without the password. tài liệu ở đây.Chọn General Option/
❑ Save and close the presentation. Nhập password để sửa như đề bài
❑ From within PowerPoint, open the nên chèn 1 file word outline bằng cách
PowerPoint_2-1a document from the practice như sau: File/Open/ All Files/ Nháy đúp
file folder to create a presentation based on vào File outline Word đề bài yêu cầu.
the outline in the document. (If you encounter Cách 2: Nếu file PowerPoint_2-1 đang có
an error opening the file, use the Insert Slides dữ liệu, chèn thêm word outline vào thì
from Outline method to import the outline chèn như sau: Đặt con trỏ tại vị trí cần
content.) chèn, Home/ New Slide/ Slide From
Outline/ Tìm tới file word outline để chèn
vào.
Ở yêu cầu này sử dụng cách 2.
❑ Delete the original blank slide from the - Xóa slide trống ở đầu
presentation, leaving only the slides created
from the outline. - Lưu lại theo yêu cầu
➤ Save the PowerPoint_2-2 presentation. Open the My Presentation. Tick vào Slide
PowerPoint_2-2_results presentation. Compare the Number. Tick vào Don’t show on
two presentations to check your work. Then close the Current slide.
open presentations.
view.
❑ Divide the presentation into four sections
as follows:
• A section named Opening that contains the - Home/ Section/ AddSection và đổi tên để
title slide and Agenda slide tạo 4 section theo yêu cầu đề bài.
➤ Return to slide 2 and do the following: Để làm phần này, tiếp tục nghiên cứu tài liệu
Study Guide từ trang 50 đến trang 57 sau đó
làm bài tập
❑ Convert the bulleted list items to normal - Chọn đoạn bulleted list ở slide 2/ Click vào
paragraphs. biểu tượng Bullet để trở về Normal
❑ Format the paragraphs in two columns, - Trong thẻ HOME/ nhóm Paragrap/ Chọn
and then change the height of the biểu tượng chia cột/ Chọn Two Column. Kéo
placeholder so that the columns are of equal thả chuột để thay đổi chiều cao của khung
length. nội dung sao cho 2 cột bằng nhau.
- Chọn slide 3
➤ Display slide 3 and do the following: - Chọn bullet list (chú ý chỉ chọn DS cấp 1)/
Click vào mũi tên bên cạnh
❑ Change the first-level bullets to Lime
Bullet/Customize…/chọn ký hiệu Dollar sign
(Accent 2) Dollar Sign symbols.
trong bảng font normal text.
- Chọn danh sách bullet cấp 2/ Mở hộp thoại
Paragraph (bằng cách nhấn vào nút mở rộng
❑ Increase the hanging indent of the second- trong nhóm Paragraph). Trong nhóm
level list items to 0.5”. Indentation của hộp thoại Paragrap chọn
Hanging, nhập 0.5
- Chọn slide 8
➤ Display slide 8 and do the following: - Chọn danh sách cấp 2/ Click vào Number
❑ Change the numbers to Purple (Accent 4) Bullet and Numbering/ Chọn kiểu chữ cái
capital letters. hoa, màu Purple (Accent 4).
-
➤ Save the PowerPoint_3-1 presentation.
Open the PowerPoint_3-1_results
presentation. Compare the two
presentations to check your work. Then close
the open presentations.
• Preparing for a buying trip slide cần link đến/ Click chọn OK
❑ Remove the background from the image - Chọn hình/ Vào thẻ Format Picture/
to isolate the skiers and chairlift. Notice that Remove Background. Chú ý chỗ này, click vào
this reveals the previously hidden bulleted dấu + để thêm vào cùng cần lấy đủ chi tiết
list item endings. của 2 nhân vật. Chọn Keep Changes để hoàn
thành.
❑ Flip the Moon shape horizontally (or - Chọn Shape hình mặt trăng/ Vào thẻ Shape
rotate it by 180 degrees) so that the open Format/ Chọn Rorate/ Flip horizontal.
curve is on the left and the outer curve is on
the right.
- Giữ Ctrl + Chọn cả 3 shape/ Vào thẻ Shape
❑ Select the three shapes, and then apply a
Format/ Chọn Shape Outline/ Chọn Weight:
1-point, White shape outline.
1pt/ Màu trắng.
- Tiếp tục chọn Shape Fill/ Chọn màu theo
yêu cầu (Chú ý chọn đúng tên màu theo yêu
❑ Using the colors from the Standard Colors
cầu)
palette, fill the Sun shape with Yellow, and
the Heart shape with Red.
❑ Select the Moon shape and apply the
- Chọn shape mặt trăng/ Chọn trong
Subtle Effect – Indigo, Accent 2 shape style.
khung Shape Style tên Subtle Effect –
Indigo, Accent 2
- Chèn văn bản vào hình: Chuột phải tại
❑ Insert the word Sleep in the Moon shape. hình Moon/ Edit Text. Nhập sleep.
Select the text, and then rotate it 270 Tiếp tục chọn văn bản Sleep/ Vào thẻ
degrees so it runs sideways from bottom to Home nhóm Paragraph/ Chọn nút Text
top. Direction/ Rotate all text 270.
❑ In the top row of the table, enter Task, - Copy văn bản cho hàng đầu theo yêu cầu.
Minutes/Day, and Hours Saved/Week.
❑ In the Task column, enter the following: - Copy văn bản nhập ở cột đầu theo yêu cầu.
Document management, Email management,
and Calendar management.
- Đưa con trỏ lên dòng đầu của bảng. Chọn
❑ Insert a new row at the top of the table,
thẻ Layout/ Insert Above. Tiếp tục chọn 3 ô
and merge the three cells in the row. In the
đầu ở hàng mới chèn thêm/ Chọn Merge/
merged cell, enter and center the title Effect
Nhập tiêu đề Effect of Focused Activity và
of Focused Activity.
vào mục Align để chọn Align Center.
- Chọn bảng/ Chọn thẻ Table Design
❑ Configure the table options to apply the
same formatting to each table row, and
emphasize the first table column.
window open.
➤ Open the PowerPoint_4-2 workbook and Tiếp tục mở file excel PowerPoint_4-2
do the following:
- Copy vùng A3:C12
❑ On Sheet1, select cells A3:C12 and copy
them to the clipboard.
➤ Switch to the presentation and do the
following:
- Dán vào vùng excel dữ liệu của đồ thị. Để
❑ Paste the copied Excel data into the Chart
ý thay đổi của đồ thị khi có dữ liệu mới.
In Microsoft PowerPoint window. Notice that
the chart changes to reflect the new data.
- Kéo chuột để thu hẹp đường màu xanh
❑ Remove Series 3 from the placeholder
dương để không chứa Series 3
data.
❑ Change the Average data point for
- Chọn đồ thị/ Chọn Edit Data/ Nhập vào số
Brushing Teeth to 4 and the Conservative
liệu trong Data excel như yêu cầu.
data point to 2. Watch the chart change as
you change the data.
❑ Close the Chart In Microsoft PowerPoint
window. - Đóng cửa sổ đồ thị
❑ Change the chart type to Stacked Line
With Markers. - Chọn đồ thị/ vào nhóm Chart Design/
Chọn Change Chart Type. Trong nhóm
Line, Chọn kiểu đồ thị Stacked Line With
❑ Change the chart title to Water - Chọn Quick Layout/ chọn Layout 5
Consumption (Gallons). - Thay tiêu đề của đồ thị Water
❑ Select the chart title and apply the Fill: - Chọn văn bản tiêu đề đồ thị/ Vào thẻ
White; Outline: Green, Accent color 1; Glow: Format/ Trong nhóm Word Art Style để chọn
Green, Accent color 1 WordArt Style. theo màu tô, màu outline, yêu cầu đề bài.
❑ For each pie slice, explode the data points - Chuột phải vào vùng đồ thị/ chọn Format
in the chart by 20 percent. Then set the angle Data Series/ Nhập vào theo yêu cầu đề
of the first slice to 200 degrees. bài.
❑ Enter Trinity as your assistant. Hierarchy/ Chọn kiểu Half Circle Organization
❑ Delete your assistant from the các cấp 1, 2, 3 theo yêu cầu.
organization chart.
❑ Add Bella as an assistant to Madeline.
❑ Close the Text pane if it is open.
- Xóa trong Text Pane
❑ Change the color scheme of the
organization chart to Colored Outline –
Accent 6 (in the Accent 6 section).
➤ Display slide 4 and do the following:
❑ Convert the bulleted list to a Continuous
- Chọn màu trong SmartArt Design/ Change
Block Process SmartArt graphic.
Color
❑ Change the layout to Basic Venn (in the
Relationship category).
- Chuột phải vào danh sách/ Convert to
SmartArt/ Chọn Continuous Block Process
❑ Change the style to Polished (in the 3-D
section). - Vào thẻ SmartArt Design/ Chọn layout/
❑ Change the colors to Colorful – Accent More Layout/ Chọn nhóm Relationship/
Colors (in the Colorful section). BasicVenn
❑ Apply a Glow effect of your choice to the - Chọn vào SmartArt Styles
diagram text.
❑ Select only the Administration & Human - Chọn Change Color
Resources shape. Then
change its fill color to Dark Blue (from the
Standard Colors palette).
➤ Save the PowerPoint_4-3 presentation. - Chọn khung SmartArt/ Thẻ Format/ Text
Open the PowerPoint_4-3_results Effect/ Chọn màu Glow bất kỳ
presentation. Compare the two - Chọn văn bản Administration & Human
presentations to check your work. Then close Resources shape/ Thẻ Format/ Text Fill chọn
the open presentations. vào Dark Blue
Objective 4.4: Insert and modify 3D models
❑ Manually rotate the 3D model to display it - Sử dụng nút ở giữa hình để xoay và xem ở
from different viewpoints. Then turn it to nhiều góc độ. Xoay nó nhìn về cái cây ở sau.
look at the tree behind it.
❑ Apply the Above Front Left view to the - Chọn hình 3D/ Chọn thẻ 3D model/ Trong
model. nhóm 3D Model View/ Chọn kiểu view Above
Front Left.
❑ Position the model so that the canvas
- Chọn Align Bottom và Align Left
aligns with the lower-left corner of the slide.
❑ Increase the size of the model to match
- Kéo thả trên các nút handle để tăng kích
the height of the slide.
thước 3D model
❑ Zoom the model within the canvas so that
- vào thẻ 3D Model/ Chọn Pan & Zoom để
the cat’s paws touch the bottom of the
zoom model chân cạm cạnh của khung vẽ.
canvas.
❑ Move the zoomed model within the
- Trỏ chuột vào con mèo và kéo thả vào sát
canvas so that the cat is at the very left edge
cạnh trái Slide
of the slide.
❑ Click away from the 3D model to display
the result.
➤ Save the PowerPoint_4-4 presentation.
Open the PowerPoint_4-4_results
presentation. Compare the two
presentations to check your work. Then close
the open presentations.
❑ Configure the audio playback options to thẻ Playback. Tíck chọn vào các mục Play
play the audio clip on a loop in the Across Slides, Loop until Stopped và Play in
background of all slides of the presentation. Background.
➤ Display slide 2 and do the following:
- Insert/ video/ This device/ Tìm tới video để
❑ Insert the PowerPoint_4-5 video clip from
chèn vào
the practice file folder. The video clip is 2
- Chọn thẻ Playback/ Trim video/ Nhập vào
minutes, 40 seconds in length.
Start , End để xác định vị trí bắt đầu và kết
❑ Trim the video to start 25 seconds into the
thúc của đoạn video cần chèn vào.
original clip and play for 1 minute.
- Chọn thẻ Playback:
❑ Configure the video to start automatically
Chọn Start: Automatically và Nhập vào 5 ở
when the slide appears and to fade out over
fade out
the last 5 seconds of the video.
❑ Mute the sound of the video so that it - Vào Volume/ Chọn Mute
does not compete with the audio
soundtrack. - Chọn thẻ Video Format/ Chọn kiểu như đề
❑ Set the video frame style to Rotated, bài ở Video Style
White (in the Moderate section). - Chuột phải vào video/ chọn Format Video/
❑ Resize the video frame to 6.0” wide and Chọn mục Size/ tích chọn vào
maintain the original aspect ratio.
để giữ tỉ lệ video. Nhập 6’’
vào chiều rộng video
- Vào format video/ Align/ Distribute
❑ Center the video frame horizontally and
Horizontal. Kéo thẻ khung video thẳng dưới
align it with the bottom of the slide title.
khung tiêu đề.
❑ Test the soundtrack and video by playing
the slideshow.
➤ Save the PowerPoint_4-5 presentation.
Open the PowerPoint_4-5_results
presentation. Compare the two
presentations to check your work. Then close
the open presentations.
OBJECTIVE GROUP 5: APPLY TRANSITIONS AND
ANIMATIONS
Objective 5.1: Apply and configure slide transitions
YÊU CẦU HƯỚNG DẪN THỰC HIỆN
The practice file for these tasks is in the Đọc hướng dẫn sau:
MOSPowerPoint2019\Objective5 practice
file folder. The folder also contains a result
file that you can use to check your work.
➤ Open the PowerPoint_5-1 presentation
and do the following:
❑ Apply the Cover transition to all the - Chọn 1 slide bất kỳ/ Vào thẻ Transition/ Chọn
slides in the presentation. hiệu ứng Cover/ Chọn Apply to All
❑ Make the transition effect begin from - Trong thẻ Transtion/ Chọn Effect Option/ Chọn
the bottom of the slide. Form bottom/ Apply to All
- Trong thẻ Transtion/Chọn Sound/ Chọn âm
❑ Add the Typewriter sound to the
thanh như đề bài/Apply to all
transition.
- Chọn slide 1/ Vào Transition chọn None/
❑ Remove the slide transition effect and
Sound: Chọn No sound.
sound from only slide 1.
➤ Display the presentation in Slide Show
view to review the results.
➤ Save the PowerPoint_5-1 presentation.
Open the PowerPoint_5-1_results
presentation. Compare the two
presentations to check your work. Then
close the open presentations.
Objective 5.2: Animate slide content
YÊU CẦU HƯỚNG DẪN THỰC HIỆN
The practice file for these tasks is in the Đọc Study Guide từ trang 119 đến trang 125
MOSPowerPoint2019\Objective5 practice file
folder. The folder also contains a result file
that you can use to check your work.
➤ Open the PowerPoint_5-2 presentation,
display slide 1, and do the following:
❑ Select the slide title and apply the Fly In - Chọn tiêu đề của slide 1/ Vào thẻ
entrance animation. animation/Chọn hiệu ứng Flyin trong nhóm
Entrance.
❑ Configure the Fly In effect options to enter - Chọn Effect Option/ Form the left
❑ Configure the bulleted list animations to chọn Start: After Perious/ Chọn thẻ Text
start automatically, 2.00 seconds after the Animation/ Tick vào Automatically after 2
title animation. second
- Trong thẻ Timing: Nhập duration: 1.5
➤ Use the Animation Painter to copy the nhóm Animation để sao chép hiệu ứng tương
animations from slide 2 to the corresponding ứng cho slide 3 (tiêu đề cho tiêu đề, nội dung
elements on slide 3. cho nội dung)
❑ Move the ladybug animation so that it - Kéo thả hiệu ứng cho bọ rùa lên đầu
❑ Set the transition duration to 2.00 seconds. Vào thẻ Transition/ nhập duration:2
- Trong thẻ Transition/ Mục Advance
❑ Configure the slides to advance automatically
Slide. Nhập vào After: 5.00 giây
after 5.00 seconds.
- Nhấn phím F5
➤ Display the presentation in Slide Show view
to review the results.
➤ Save the PowerPoint_5-3 presentation. Open
the PowerPoint_5-3_results presentation.
Compare the two presentations to check your
work. Then close the open presentations.