Professional Documents
Culture Documents
4-SessionPlan-ULLA
4-SessionPlan-ULLA
Learning Outcomes:
1. Plan garment design
2. Take clients body measurements
3. Draft basic/block pattern
4. Manipulate pattern
5. Cut final pattern
A. INTRODUCTION:
This unit covers the knowledge, skills and attitudes required in drafting and cutting basic/block pattern for men’s casual apparel. It includes the
requirements for planning garment design, taking body measurement, drafting basic/block pattern and cutting final pattern.
B. LEARNING ACTIVITIES:
LO 1: Plan garment design
Assessment Criteria:
1. Determine customer’s job requirements in accordance with company practice
2. Prepare garment design in accordance with the client’s requirements.
3. Discuss and select design and fabric according to client’s specifications.
4. Incorporate special needs of the client into the design based on procedures.
Page 1 of 6
Learning Content Time
Method Presentation Practice Feedback Resources
(Hours)
1.1-1 Types of Lecture/ Trainees read Trainees answer Self- Refer to Answer CBLM 1/2
Casual Apparel Discussion Information Sheet Check 1.1-1 Key 1.1-1 PPT Presentation
PPT Presentation 1.1-1 on Types of White board and
Casual Apparel marker
1.1-2 Classification Video viewing Read Information Answer Self-Check Refer to Answer Key Video file 4.1-1 1
and Types of Sheet 1.1-2 on 1.1-2 1.1-2 Projector
Fabrics classification and Laptop
types of fabrics
1.1-3 Sewing Tools Lecture/ Read Information Trainees answer Self- Trainees compare CBLM ½
and Equipment Discussion Sheet 1.1-3 Check 1.1-3 answers in Answer PPT Presentation
PPT Presentation Key 1.1-3
1.1-4 Garment Job Sheet 1.1-4
Design Planning
LO 2: Take client’s body measurements
Assessment Criteria:
1. Prepare measuring tools in accordance with job requirements
2. Take body measurements based on procedures
3. Take body measurements of client in sequence according to job requirements and standard body measurement procedures
4. Record body measurements in line with company requirements/practice
Page 2 of 6
1.2-2 Linear Lecture/ Read Information Answer Self-Check Refer to Answer Key CBLM 1/2
Measurements Discussion Sheet 1.2-2 1.2-2 1.2-2 PPT Presentation
PPT Presentation White board and
marker
1.2-3 Taking Body Lecture Read Information Answer Self-Check Refer to Answer Key CBLM 1
Parts Measurement Discussion Sheet 1.2-3 1.2-3 1.2-3 PPT Presentation
and Recording PPT Presentation White board and
marker
1.3-2 Procedures in Lecture Read Information Answer Self-Check Refer to Answer Key CBLM ½
drafting Block Discussion Sheet 1.3-2 1.3-2 1.3-2 PPT Presentation
Pattern PPT Presentation
Demonstration Demonstration on Perform Task Sheet Evaluate Performance White board and
Page 3 of 6
Procedures in Drafting 1.3-2 using Criteria Checklist marker
Block Pattern Follow on Procedures in 1.3-2 Pattern tools
Drafting Block Pattern
LO 4: Manipulate Pattern
Assessment Criteria:
1. Lay out block pattern in accordance with company procedures
2. Manipulate block pattern in accordance with customer’s specifications
3. Label, fill and secure final pattern as per standard operating procedures
1.4-1 Procedures in Lecture Read Information Answer Self-Check Refer to Answer Key CBLM 1/2
Pattern Making Discussion Sheet 1.4-1 1.4-1 1.4-1 PPT Presentation
PPT Presentation
Pattern tools
Demonstration Demonstration on Perform Task Sheet Evaluate Performance
Pattern Making 1.4-1 using Criteria Checklist
on Pattern Making 1.4-1
LO 5: Cut Final Pattern
Assessment Criteria:
1. Select cutting tools in accordance with job requirements
2. Perform final pattern cutting in accordance with customer’s specifications/measurements
1.5-1 Selection of Lecture Read Information Answer Self-Check Refer to Answer Key CBLM 1
Cutting Pattern Discussion Sheet 1.5-1 1.5-1 1.5-1 PPT Presentation
tools PPT Presentation White board and
marker
1.5-2 Procedures in Lecture Read Information Answer Self-Check Refer to Answer Key CBLM
Pattern Cutting Discussion Sheet 1.5-2 1.5-2 1.5-2 PPT Presentation
PPT Presentation White board and
marker
1.5-3 Cutting Final Demonstration Demonstrating on Perform Task Sheet on Evaluate Performance CBLM
Pattern Cutting Final Pattern Cutting Final Pattern using Criteria Checklist PPT Presentation
1.4-1 Pattern tools
C. ASSESSMENT PLAN:
Page 4 of 6
Written Test:
Self Checks on:
LO 1 - Plan Garment Design 1.1-1 Types of Casual Apparel
1.1-2 Classification and Types of Fabrics
1.1-3 Selection of Fabric and Accessories
LO 2 – Take Clients Body 1.2-1 English and Metric System of Measurement
Measurements 1.2-2 Linear Measurements
1.2-3 Taking Body Parts Measurement and Recording
LO 3 – Draft Basic/Block Pattern 1.3-1 Tools and Materials in Drafting Basic Pattern
1.3-2 Procedures in drafting Block Pattern
Perform Test:
Task Sheet on:
LO 3 – Draft Basic/Block Pattern 1.3-2 Procedures in Drafting Block Pattern
Page 5 of 6
LO5 - Cut Final Pattern 1.5-3 Cutting Final Pattern
Page 6 of 6