Professional Documents
Culture Documents
ss310s
ss310s
Specification
Grade number Type 310S
Grade name S31008
Specification name ASTM A240
Specification title Chromium and chromium-nickel
stainless steel plate, sheet and strip for
pressure vessels and for general
applications
Specification status according to source Active
Specification year 2016
Composition
Base element Fe (iron)
C (carbon) 0 - 0.08 %
Cr (chromium) 24 - 26 %
Fe (iron) 48.4 - 57 %
Mn (manganese) 0 - 2 %
Ni (nickel) 19 - 22 %
P (phosphorus) 0 - 0.045 %
S (sulfur) 0 - 0.03 %
Si (silicon) 0 - 1.5 %
Mechanical
Ultimate tensile strength 515 MPa
Data note Minimum value
Source data compiled and published by ASM International, SAE International, Matplus GmbH, WMI and UK Steel (a division of EEF).
Full dataset collated and distributed under license by ANSYS, Inc.
ANSYS, Inc. provides no warranty for this data.
Page 2 of 2
310S (ASTM A240)
Elongation 40 % strain
Data note Minimum value
ASTM A240-01: Heat resisting chromium and chromium-nickel stainless steel plate, sheet and strip
for pressure vessels (Withdrawn)
ASTM A240-04: Heat resisting chromium and chromium-nickel stainless steel plate, sheet and strip
for pressure vessels and for general applications.
ASTM A240-06: Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure
vessels and for general applications
Source data compiled and published by ASM International, SAE International, Matplus GmbH, WMI and UK Steel (a division of EEF).
Full dataset collated and distributed under license by ANSYS, Inc.
ANSYS, Inc. provides no warranty for this data.