Professional Documents
Culture Documents
04DA_Flexiproof_G
04DA_Flexiproof_G
FLEXIPROOF
Simon Payne 100/UV
Design Engineer
RESEARCH +
DEVELOPMENT
FlexiProof 100 UV
The RK FlexiProof 100 offers a high speed, The FlexiProof 100 eliminates the need to use a
operator-friendly machine for the production production line printing press for pilot runs, as the
of proofs using water, solvent or UV machine is a scaled down but exact version of a full
Flexographic inks. It is an essential tool for sized flexo press.
QUALITY
all those involved in the manufacture and use
BENEFITS CONTROL
of flexo inks. Ideal for quality control testing
to ensure consistency of performance of
The FlexiProof 100 is ideal for both ink manufacturers
inks and substrates over time, presentation
and printers and can be used for the following, with all
samples, printability of substrates, R&D
of the attendant benefits:
including product and commercial viability,
and computer colour matching data. • Printers: Eliminates press down time by
colour matching off press
• Inks: Computer colour matching, database
and sample preparation
• Can be used to determine performance
properties i.e. wear resistance, scratch
resistance, flexibility, durability, gloss, etc.
• Will print on all typical commercial
substrates - paper, board, film, foil, tissue GLOBAL
• Minimises expensive on-press waste SUPPORT
production, boosts customer confidence
and minimises customer returns
Above: Print samples of the FlexiProof 100 and
FlexiProof 100/UV Complies with ISO 2834-2
Removable
doctor blade
assembly forms
ink chamber
Cleaning/storage rack
Photopolymer
printing plate
The FlexiProof 100 and FlexiProof 100/UV are invaluable colour evaluation tools helping to bring process
variables into control, maintain quality and minimise waste.
1. Select and fit the required anilox roll. Details of standard 2. Fit substrate (105mm x 297mm) to impression roll using
anilox rolls are on the adjacent page. the self-adhesive substrate strip. Set printing speed up to
99m/min.
3. Apply ink using a disposable pipette or spatula. Side dams 4. First the anilox roller accelerates to print speed and rotates
fitted at each end of the doctor blade assembly, provide a 3 times to distribute the ink. Then the plate and impression
reservoir holding sufficient ink for producing multiple proofs rollers rotate through one revolution to produce a proof.
when required.
5. Clean the blade, blade holder and side dams with a 6. Clean the anilox roll while it rotates. The printing plate is
suitable solvent. also easily cleaned with the machine stopped. Use the
mirror to check that it’s clean.
The first
The The
firstfirst name
namename in sample
sample preparation
in sample
in G P 1 Ink0equipment
0
Types Solvent based, water based, UV
H I K303 S P E EMULTICOATER
preparation
in sample preparationequipment
equipment FLEXIPROOF 100
G HTECHNICAL
Substrates D G DATAR A VFlexible
U R Epaper,Pboard,
R Ofilm,
OFER
foil and tissue
FLEXIPROOF 100/UV + UVLED
Simon Payne GRAVURE PRINTING HEAD
Substrate Size
Printing
FlexiproofSpeed Variable g 99m/mi
297mm x20105mm
ayne Design Engineer
Ink quality
100
UVLED 125mm
Types control on all conventional x 105mm
- half A4
K303 Standard Gravure Proofer is used in laboratories for
GRAVURE
Flexiproof 100/UV + ink/substrate
Solvent based, water based, UV
eer ANILOX
GRAVURE ROLLERS
combinations PRINTING
for HEAD
colour, printability, adhesion, etc.
RK PrintCoat Instruments Ltd. Maximum
Substrates InkPrinting
Standard
K303 Gravure
Areaanilox
ceramic
is transferred
Proofer
rollers
from have two board,
an electronically
Flexible
is engraved
used240mm
inonto
paper,
laboratories
engraved bands as
engraved
film,
listed
Flexiproof 100below.
printing Rollers
plate directly withthe
x other screens which is
substrate,
75mm
foil and tissue
Litlington, Royston, Herts. SG8 0QZ, UK forStandard
can
quality
Flexiproof
also
attached
control
100/UV +Design
be supplied.
to
on the
UVLED Gravure
rubber
90mm impression
all conventional x 75mm Plates:
roller. Doctor
ink/substrate
Instruments Ltd. blade and roller adjustments are made
Tel: +44 (0)1763 850915 Substrate
combinationsSize
CELLS Volume
for colour,
pneumatically
CELLS
printability,
allowing adhesion, etc.
repeatable
Volume
settings for
ton, Herts. SG8 0QZ, UK FlexiProof 100 UV StandardRef
Per
Flexiproof Plate Thickness
linear cm
100
Description
Cm3/m2 1.14mm
297mm xplus
Per linear 0.5mm,
inch
105mm cushion
Cbm/inch2
- half A4
E-mail: simon@rkprint.com Website: www.rkprint.com future tests.
mount 1000(other sizes available)
763 850915 Standard
400100/UV + UVLED
Flexiproof
303/D8W
320
Design
38 Wedges
4
Gravure
125mm150
800
xlines/inch
105mm Plates:2.0 - 60%
100%
2.6
@rkprint.com FLEXIPROOF 100/UV
Website: www.rkprint.com Bench
MaximumSpace
Ref
200 Printing
303/S3W Area 3 Wedges55cm
5 Description
150wide
500
x 45cm
lines/inch deep
3.25
160 6 100% - 80% - 60%
400 3.9
Flexiproof
of 100 240mmnetx-75mm
A new generation FlexiProof 100 with UV curing CLEANING
Weight
Flexiproof
FlexiProof 100
303/D8W
120100/UV
Printing Area 275
8 Wedges
7 x 285mm
+ UVLED
45kg 150
90mm300
lines/inch
51kg gross
x 75mm
maximum. 4.55
100 8 100% - 60% 250 5.2
RK Print Coat Instruments’ award winning FLEXIPROOF FlexiProofThe essential job
100 of cleaning
220 - 240V various
or 100machine
- 120V
100 is available with UV curing facilities. Available
FlexiProof 100 UV
as an Standard Plate
303/S3W
80
Power Supply Thickness
components following
133 Wedges each
1.14mm
150
200
50/60Hz proofing
plus 0.5mm,
lines/inch run
8.45has
cushion
55been simplified18 by careful140design. The illustration
11.7
option, UV curing extends the capabilities of this precision mount (other
100% - 80% - 60% sizes available)
UV Lamp(left) shows the doctor
details blade 2being
200W/cm Peak removed for
FLEXIPROOF 100/UV
bench-top sample preparation system still further. Printing
cleaning. It can x
Area 275 be285mm
seen maximum
that the printing plate
FLEXO PRINTING
Bench Space
TECHNICAL DATA
and impressionHEAD
rollFLEXIPROOF
Wavelength:x310
55cm wide
100
are easily accessible for
45cm deep
- 370 Nm
A new
The generation
FLEXIPROOF 100FlexiProof
with UV will100 with
enable UVtocuring
users Weight
UV Power cleaning.
of FlexiProof
Supply 100 45kg- net
220 240V - 51kg gross
Printing
Utilises Speed anilox flexo Variable
doctored plates from20 ➝ 99m/min
which the ink is
accurately simulate UV printing and instant
RK Print Coat Instruments’ award winning FLEXIPROOF curing for all FLEXO
FlexiProof PRINTING50/60Hz,
100
transferred 220HEAD
- 240V 15amp - single
orsubstrate.
100 - 120V phase
Ink Typesvia the plate rollerSolvent
onto the
based, water based, UV
prepress applications, from computer colour matching
100 is available with UV curing facilities. Available as an to UV Powerpack
Utilises
Power doctored
Photopolymer
Supply dimensions
anilox
or rubberFlexo40cm
plates
plates
50/60Hz x 40cm
are from xto
madewhich 20cm - own
the
your 25kgs
ink
customerUVsamples and quality
thecontrol, and offrom
thisR&D to
PRINTING viaPLATES
option,FLEXIPROOF
curing extends capabilities precision Substrates
design,
is transferredincluding for instance
the plate roller Flexible
company
onto paper,
the board,
logo/address.
substrate. film andVery
foil
100 UV LED
UV Lampdetails
Lamp details FJ200
200W/cm 16W/cm
2
Peak
2
at 395 Nm
printability testing,
bench-top sample etc. and address printability problems fine pressure adjustments can be made to obtain a perfect
A newpreparation
generationsystem still further.
FlexiProof 100 Photopolymer
Substrate or
Sizerubber plates are
print on most substrates byFJ100
made
297x105mm
12W/cm
Wavelength:
the use
to 2your
– half
310 at
A4
395
- 370
of micrometers.
ownNmThis
Nm
such as pinholing, adhesion, absorption, gloss, shrinkage,
The FLEXIPROOF
With UV curing
100 with UV will enable users to
design, The
also MaximumNew
including
means that GP100
forsettings
Printing
uses
instance
Area for
the
company
(385
any same
240x75mm
electronically
logo/address.
&particular
405 Nm also available)
substrate can
wetting etc. UV bePower engraved
Supply printing plates 220 - as240Vused on our well
Now available with optional LED UV curing. recorded.
Very fine pressure adjustments can be made to obtain
accurately simulate UV printing and instant curing for all known Printing Proofer and are manufactured
Standard Plate Thickness 50/60Hz,1.14mm15amp - single
plus 0.5mm, phase
cushion
Now RK
available Print
with Coat Instruments’
UVLED curing award winning
capabilities.
prepress applications, from computer colour matching FLEXIPROOFto 100 a perfectinprint on most
exactly substrates
the same way by
as
mount
the use of cylinders.
production
UV Powerpack dimensions 40cm x 40cm x 20cm - 25kgs
is now available with UV curing facilities. Available as an
customer samples and quality control, and from R&D to Standard
A choice
micrometers. ThisDesign
of
alsoone orFlexo
means more Plates:
of the standard
that settings for any plates
option, UV curing extends the capabilities of this precision Overall Plate Dimensions
available will normally be 260x90mm
satisfactory but special
LED Lamp substrate
particular details can be recorded.FJ200 16W/cm2 at 395 Nm
printability testing,
bench-top etc. and preparation
sample address printability
system stillproblems
further. plates including
Ref
those with a logo and/or
Description
Roller Adjustment
company details can FJ100 12W/cm
In steps
be
2
of 4 micron
supplied. at 395 Nm
Maximum
such as pinholing, adhesion, absorption, gloss, shrinkage,
The FLEXIPROOF 100 with UV will enable users to accurately RK - Business Cards '17_RK - Business Cards 5.0 16/01/2017 14:
engraved area: 160X95mm.
(385 & 405
A etc.
wetting SOLID AREA
simulate PLATE for all prepress applications, from
UV printing Standard
303/35
Doctor Blade Design Flexo
150 lines/inch @ 100%Plates:available)
Nm also
Hardened steel stepped edge
computer colour
100 lines/inch matching to
(40 lines/cm) customer100%
Density: samples and quality 92x12x0.15mm
control, and from R&D to printability testing, etc. and Ref
303/25
Description
150 lines/inch @ 60%
Now150
available withprintability
lines/inch
address UVLED curing
(60 lines/cm) capabilities.
Density:
problems 100% adhesion,
such as pinholing,
Bench Space 55cm wide x 45cm deep
B www.rkprint.com
RK PrintCoat Instruments Ltd.
SAMPLE PREPARATION EQUIPMENT Tel: +44(0)1763
www.rkprint.com
www.rkprint.com
www.rkprint.com 852187
L.E
6
PlaceSolutions
lmm B Résidence
Prince lbn Batoua
Sidi Mohammed Tel.: +212 52 22 41
Fax: 42 714
751
www.rkprint.com
Litlington, Royston,Place
6 Herts.
lmm
Belvedère
RK PrintCoat SG8
Résidence
Prince 0QZ,
Sidi Mohammed
Instruments UK younesbaou@menara.ma
lbn Batoua
Ltd.
Tel.: +212
Fax: +212 52
52 22
22 41
42 714
751
E-mail: sales@rkprint.com
Tel: +44 (0)1763MA
MA
Place- 20300 Casablanca
Prince
Belvedère
850915
Sidi Mohammed Fax: www.labomat.eu
+212 52 22 42
younesbaou@menara.ma 751
Litlington, Royston, Herts. SG8 0QZ, UK
Belvedère
- 20300 Casablanca younesbaou@menara.ma
www.labomat.eu
E-mail: simon@rkprint.com Website: www.rkprint.com
MA - 20300 Casablanca www.labomat.eu
Tel: +44 (0)1763 850915
E-mail: simon@rkprint.com Website: www.rkprint.com