Professional Documents
Culture Documents
Electrical Enquiry
Electrical Enquiry
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural 4 Cum
sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources)
15 Centering and shuttering including
strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, 23 Sqm
etc. for mass concrete
16 Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all complete
upto plinth level.
Thermo-Mechanically Treated bars of 150 Kg
grade Fe-500D or more.
17 Providing 6 mm thick cement plaster of
following mix :
1:3 (1 cement : 3 fine sand) 12 Sqm
18 Supplying and fixing street light luminaire with die cast
aluminium housing and toughened glass/ cover with min IP66
degree of protection, Individual LED with optical lens for better
light distribution throw across and along the road, with
luminaire efficacy of greater than 100 Lumen / watt, colour
rendering Index
The luminaire should have 5 KV surge
designed thermal management system with aluminium heat
sink. The Driver used be a constant current driver with
loop earthing, testing and commissioning etc. as required.
24 Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc. conforming
to IS 14930, Part II complete with fitting and cutting, jointing
etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as
required.
cable alley, cable gland for supporting and fixing the following
switchgear, as per attached specifications and confirming to the
CPWD general specifications part-I (Internal), part-II (External),
part-IV (Sub
station).
Incoming:
a) 63 A, 4 pole MCCB, 25 KA rating, (Icu=100% Ics) thermal
magnetic release type complete with Rotary handle,
spreader terminals etc. - 1 No.
b) Digital Multifunction Meter with RS485
port - 1 No.
c) R,Y,B LED indication lamps along with
2A control MCBs - 1 set.
d) Suitable ratio CTs - 1 set.
Outgoing:
2Nos DOL starter control compartments
suitable for 7.5HP motors including supplying and fixing
following items in
each compartment
b) 3 Nos. Phase indication LED lamps with 2 Amp backup MCB, 1 Job
breaker ON / OFF LED indicating lamps with 2 Amp backup
MCB - 1 Sets.
Sub Head-VI (LT Cables)
39 Supplying of following sizes of XLPE insulated and PVC
sheathed aluminium conductor armoured cable of 1.1 KV grade
conforming to IS:7098 (Part-I) 1988 with upto date amendments
duly ISI marked
complete as required.
Out going:
a) 100 Amps. 4 pole, Moulded Case Circuit Breaker (MCCB), 25 KA
breaking capacity (Icu=Ics) with thermal magnetic release, with
over load and short circuit protection, spreader links, rotary handle,
ON/OFF indication lamps with MCB protection, etc -
2 Nos.
d) 4 x 25 sq.mm 80 Metre
51 Laying of one numberPVC insulated and PVC sheathed / XLPE
power cable of
1.1KV grade of following size in the existing RCC / HUME /
TRAY/ METAL
pipe as required.
UP to 35 sq.mm 70 Metre
52 Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade
as required.
b) 4 X 25 sq. mm (38mm) 3 Each
53 Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc. conforming
to IS 14930, Part II complete with fitting and cutting, jointing
etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as
required.