Professional Documents
Culture Documents
Sanitary, Water & Gas Installation
Sanitary, Water & Gas Installation
SCHEDULE OF RATES
SCHEDULE OF RATES
UPVC waste outlet with flat round screw-in grating cover and filter
including fixing to pipe and setting on concrete floor.
15 100mm diameter UPVC floor waste complete with hopper and 150 x no 47.40
150mm UPVC hinged grating with round grating cover including
jointing to waste pipe and encasing in concrete.
16 80mm diameter stainless steel washout connecting pipe 350mm long set 300.00
with stainless steel flange at one end and welded with and including
150mm diameter x 9mm thick stainless steel collar at mid-length and
cast in reinforced concrete structure.
17 28mm diameter stainless steel overflow warning connecting pipe set 75.40
400mm long welded with and including stainless steel collar at mid-
length and cast in reinforced concrete structure.
18 15mm diameter stainless steel flexible connecting pipe 400mm long set 5.00
welded with and including stainless steel collar at mid-length and cast
in reinforced concrete structure.
Grade 30 concrete bed and haunching drain pipe with 40mm thick
lean concrete bed and all necessary formwork (drain pipes measured
separately):
SCHEDULE OF RATES
Ductile iron pipe with cement lining laid on concrete bed in trench
(trench and concrete bed measured separately):
SCHEDULE OF RATES
UPVC pipe Class D for soil, waste, ventilation, discharge stacks and
down pipes fixed to wall or ceiling with collar brackets :-
45 Standard cast iron street gully including connection, all necessary no 297.80
excavation and concrete surround.
SCHEDULE OF RATES
64 100mm diameter half round vitrified clay straight or curve main or m 7.90
branch channels to inspection chamber/sump including bedding and
jointing in cement mortar (1:1).
65 150mm diameter half round vitrified clay straight or curve main or m 10.20
branch channels to inspection chamber/sump including bedding and
jointing in cement mortar (1:1).
SCHEDULE OF RATES
67 25kg galvanised cast iron cover and frame for inspection no 34.30
chamber/sump including setting frame in cement mortar and sealing
cover in grease and fine sand.
Extra over UPVC soil, waste, ventilation, discharge stacks and down
pipes for fittings:
SCHEDULE OF RATES
Extra over UPVC soil, waste, ventilation, discharge stacks and down
pipes for fittings (Cont’d):-
UPVC fittings for soil, waste, ventilation, discharge stacks and down
pipes:
Extra over UPVC soil, waste, ventilation, discharge stacks and down
pipes for fittings Class D:
SCHEDULE OF RATES
98 100mm diameter UPVC floor waste complete with hopper and 150 x no 47.70
150mm UPVC grating with screw-in round grating cover and filter
including jointing to waste pipe and encasing in concrete.
99 150mm diameter UPVC gully trap complete with hopper and 150 x no 65.70
150mm UPVC grating, screw-in round grating cover and filter
including jointing to waste pipe and encasing in concrete.
102 With 150 x 150mm square base to 80mm diameter pipe. no 10.60
103 With 200 x 200mm square base to 100mm diameter pipe. no 19.20
104 With 230 x 230mm square base to 150mm diameter pipe. no 22.40
UPVC waste outlet with flat round screw-in grating top complete with
all necessary accessories and setting in cement and mortar :-
105 With 150 x 150mm square base to 80mm diameter pipe. no 11.30
106 With 200 x 200mm square base to 100mm diameter pipe. no 18.10
107 With 230 x 230mm square base to 150mm diameter pipe. no 24.30
SCHEDULE OF RATES
108 UPVC pipe skirting comprising of 112.50mm diameter x 75mm high no 15.50
and 198.50 x 198.50mm square base to base of 100mm diameter pipe
including setting in waterproof cement mortar.
109 UPVC pipe skirting comprising of 162.50mm diameter x 75mm high no 27.60
and 198.50 x 198.50mm square base to base of 150mm diameter pipe
including setting in waterproof cement mortar.
115 Light duty galvanised cast iron cover and frame size 600 x 450mm for no 40.60
inspection chamber/sump including setting frame in cement mortar
and sealing cover in grease and fine sand.
116 Close-coupled white vitreous china wash-down pedestal w.c. suite no 225.00
complete with approved rigid (heavy duty) plastic seat and cover with
buffers and hinging devices, white vitreous china 9.0/4.5 litres dual
action flushing cistern and all necessary fittings, accessories for fixing
and joining to pipeworks.
117 White vitreous china close-coupled single-trap siphonic w.c. suite no 291.00
complete with approved rigid (heavy duty) plastic seat and cover with
buffers and hinging devices, white vitreous china 9.0/4.5 litres dual
action flushing cistern and all necessary fittings, accessories for fixing
and joining to pipeworks.
118 Low level wash-down pedestal w.c. complete with white plastic seat no 287.00
and cover, 9.0/4.5 litres dual action low level plastic cistern and all
necessary fittings, accessories for fixing and joining to pipeworks.
SCHEDULE OF RATES
121 Squat w.c. pan in white vitreous china with brass cleaning eye:-
122 With high level dual action plastic cistern complete with all necessary no 142.90
flush pipe, fittings and accessories
124 High level plastic cistern with capacity for up to 4.5 litres (maximum), no 46.55
complete with overflow connection, stainless steel angles, etc and
32mm UPVC flush pipe and accessories for fixing and jointing to
pipework.
125 Close-coupled water saving white vitreous china pedestal w.c. suite no 258.10
complete with w.c. bowl, cistern, internal parts and fittings forming
the whole flushing mechanism, seat and cover including all necessary
fittings, accessories for fixing and joining to pipeworks.
SCHEDULE OF RATES
129 Squat w.c. pan in white vitreous china with brass cleaning eye, 9.0/4.5 no 158.50
litres high level dual action plastic cistern complying to SS68:1984
complete with 20mm diameter overflow connecting and stainless steel
angles, 13mm plastic ball valve with plastic arm and float, aluminium
alloy lever galvanised steel pull chain and plastic handle, 32mm
diameter UPVC flush pipe and clips including cutting and pinning
angles and clips to wall, accessories for fixing and jointing and
connections to pipework.
130 Squat w.c. pan in white vitreous china with brass cleaning eye, but no 94.70
without cistern and flush pipe.
131 9.0/4.5 litres dual action high level plastic cistern complete with no 69.70
20mm diameter overflow connection, stainless steel angles, 13mm
plastic ball valve with plastic arm and float aluminium alloy lever
galvanised steel pull chain and plastic handle, 32mm UPVC flush pipe
and clips including cutting and pinning angles and clips to walls,
accessories for fixing and jointing to pipework.
132 'Santor' urinal bowl or equivalent complete with 9.0/4.5 litres dual no 177.30
action plastic high level cistern, 20mm diameter overflow connection,
13mm diameter ball valve with plastic arm and float, galvanised steel
pull chain and plastic handle, 40mm diameter stainless steel flush pipe
and pair of stainless steel angles fixed to wall, the waste fitting
comprising of 40mm stainless steel waste pipe and chromium plated
bottle trap and accessories for fixing and jointing to pipe work.
133 White vitreous china wall hung urinal bowl complete with high level no 166.60
flushing cistern with stainless steel pipe and all necessary fittings and
accessories.
134 Wash-hand basin in white vitreous china size 500 x 400mm with no 89.20
32mm diameter waste plug and chain, approved stainless steel
brackets, 32mm UPVC waste pipe, 32mm UPVC bottle trap with all
necessary washers, seals and nuts including cutting and pinning
brackets to walls.
SCHEDULE OF RATES
141 600 x 450 x 200mm white fire clay sink complete with stainless steel no 351.10
cantilever angles, washers, seals and nuts, valcantile plug and chrome
brass chain and 50mm UPVC waste pipe with 40mm UPVC bottle
trap including cutting and pinning angles to wall.
142 1500 x 500mm locally made double bowl single drainer stainless steel no 234.20
sink complying with SS40:1971 and complete with stainless steel
cantilever angles, washers, seals and nuts, valcantile plug and chrome
brass chain and 50mm UPVC waste pipe with 40mm UPVC bottle
trap including cutting and pinning angles to wall.
1500 x 500mm locally made single bowl double drainer stainless steel
sink complying with SS40:1971 and complete with stainless steel
cantilever angles, washers, seals and nuts, valcantile plug and chrome
brass chain and 50mm UPVC waste pipe :-
143 With 40mm UPVC bottle trap including cutting and pinning angles to no 208.30
wall.
144 With 40mm chromium plated 'P' or 'S' trap including cutting and no 225.90
pinning angles to wall.
SCHEDULE OF RATES
144 1800 x 500 x 170mm deep double bowl double drainer stainless steel no 275.10
sink complete with cantilever angles and stainless steel brackets,
washers, seals and nuts, valcanite plug and chrome brass chain and
50mm UPVC waste pipe, chromium plated 'P' or 'S' trap including
cutting and pinning bracket to wall.
146 1500mm wide frameless glass shower screen with 8mm thick clear no 620.40
tempered safety glass single door and fixed panel complete with
chrome finished solid brass ironmongery.
149 15mm chromium plated brass pillar tap including all necessary no 19.10
accessories for fixing and jointing to pipeworks.
150 15mm chromium plated brass pillar tap with swivel swan neck no 27.20
including all necessary accessories for fixing and jointing to
pipeworks.
151 Delay action tap including all necessary accessories for fixing and no 118.90
jointing to pipeworks.
152 15mm chromium plated brass bib-tap including all necessary no 18.40
accessories for fixing and jointing to pipeworks.
153 15mm chromium plated brass 2-way bib-tap including all necessary no 26.50
accessories for fixing and jointing to pipeworks.
SCHEDULE OF RATES
154 15mm chromium plated ceramic disc cartridge operated single lever no 61.60
basin mixer tap complete with pop-up waste including all necessary
accessories for fixing and jointing to pipeworks.
155 15mm chromium plated sink mixer tap including all necessary no 85.20
accessories for fixing and jointing to pipeworks.
156 150 x 150mm semi-recess white vitreous toilet paper holder with no 13.40
spring roller including hacking and bedding in wall with cement
mortar.
157 150 x 150mm recessed vitreous china soap tray including hacking, and no 13.20
bedding in wall with cement mortar.
158 Size 18.5mm diameter x 2.5mm thick at basin tap inlet. no 0.10
159 Size 21.0mm diameter x 2.5mm thick for tap mixer. no 0.10
160 15mm diameter constant flow regulator of 12 litres per minute for bib no 5.80
tap inlet at common areas.
SCHEDULE OF RATES
SCHEDULE OF RATES
Ductile iron pipes and fittings for water mains with cement lining
internally including spigot and socket/flanged joints complete with
bolts, nuts, washers and gaskets if required :-
184 80mm diameter laid in trench including excavation and backfilling m 39.80
with selected earth.
185 80mm diameter laid in trench including excavation and backfilling m 55.90
with approved granular material.
186 100mm diameter laid in trench including excavation and backfilling m 40.40
with selected earth.
187 100mm diameter laid in trench including excavation and backfilling m 56.50
with approved granular material.
188 80mm diameter pipe/main with flanged joints laid on and including m 54.20
precast concrete support blocks at about 2.7m centres.
189 100mm diameter pipe/main with flanged joints laid on and including m 56.90
precast concrete support blocks at about 2.7m centres.
190 80mm diameter rising main with tyton joints fixed to wall with m 39.00
holderbats.
191 Extra over all 80mm diameter pipe for flanged bends including no 59.20
making necessary extra joints.
192 Extra over all 80mm diameter pipe for tees including making no 82.80
necessary extra joints.
SCHEDULE OF RATES
Ductile iron pipes and fittings for water mains with cement lining
internally including spigot and socket/flanged joints complete with
bolts, nuts, washers and gaskets if required (Cont’d):-
193 Extra over all 80mm diameter pipe for collars including making no 81.80
necessary extra joints.
194 Extra over all 80mm for socket/spigot and flange adaptor including all no 23.20
necessary bolts, nuts and gaskets.
195 100mm diameter rising main with tyton joints fixed to wall with m 41.50
holderbats.
196 Extra over all 100mm diameter pipe for flanged bends including no 62.10
making necessary extra joints.
197 Extra over all 100mm diameter pipe for tees including making no 94.90
necessary extra joints.
198 Extra over all 100mm diameter pipe for collars including making no 95.50
necessary extra joints.
199 Extra over all 100mm for duckfoot bend including all necessary bolts, no 58.10
nuts and gaskets.
200 100mm diameter ductile iron flange adaptor for distribution main no 119.70
complete with rubber gaskets, bolts and nuts.
201 Supply and fix 100mm diameter ductile iron gate valve with flanged no 147.10
ends.
202 100mm diameter x 65mm diameter ductile iron flanged flow nozzle. no 111.10
203 80mm diameter cast iron sluice/gate valve with flanged ends. no 116.50
204 100mm diameter cast iron sluice/gate valve with flanged ends. no 135.20
205 35mm diameter bronze spring loaded lift check valve. no 20.80
206 40mm diameter brass spring loaded lift check valve. no 28.90
207 80mm diameter cast iron spring loaded lift check valve with flanged no 313.50
ends.
SCHEDULE OF RATES
Ductile iron pipes and fittings for water mains with cement lining
internally including spigot and socket/flanged joints complete with
bolts, nuts, washers and gaskets if required :- (Cont’d)
208 100mm diameter cast iron spring loaded lift check valve with flanged no 379.60
ends.
209 50mm diameter brass high pressure equilibrium ball valve with brass no 378.50
arm and copper float.
210 100mm diameter brass high pressure equilibrium ball valve with brass no 1,144.90
arm and copper float.
218 40mm diameter solenoid valve for automatic time-controlled refuse no. 347.40
chute flushing system.
UPVC water pipe with sockets, connectors, and couplings and jointed
in approved solvent cement including fixing to wall or ceiling with
approved holderbats (bends, elbows and junctions measured
separately) :-
221 Extra over 20mm diameter pipe for single junction. no 2.80
222 Extra over 20mm diameter pipe for bend or elbow (all angles). no 2.00
SCHEDULE OF RATES
UPVC water pipe with sockets, connectors, and couplings and jointed
in approved solvent cement including fixing to wall or ceiling with
approved holderbats (bends, elbows and junctions measured
separately) Cont’d :-
224 Extra over 25mm diameter pipe for single junction. no 3.10
225 Extra over 25mm diameter pipe for bend or elbow (all angles). no 2.20
227 Extra over 32mm diameter pipe for single junction. no 3.60
228 Extra over 32mm diameter pipe for bend or elbow (all angles). no 2.70
230 Extra over 40mm diameter pipe for single junction. no 3.60
231 Extra over 40mm diameter pipe for bend or elbow (all angles). no 2.30
233 Extra over 50mm diameter pipe for single junction. no 5.20
234 Extra over 50mm diameter pipe for bend or elbow (all angles). no 2.90
236 Extra over 80mm diameter pipe for single junction. no 7.50
237 Extra over 80mm diameter pipe for bend or elbow (all angles). no 5.50
238 Labour only for boring holes in UPVC pipes for approximately 3.2m no 4.30
long at 50mm centre/centre for use as bin chute sparge pipe.
SCHEDULE OF RATES
246 Rolled steel joists for support to tanks including bolts, fixing and kg. 1.30
painting.
SCHEDULE OF RATES
254 63mm diameter polyethylene gas pipe sleeved in 80mm diameter m 32.20
UPVC pipe and laid in concrete channel including bituminous joints
and filling up with cement mortar grout (concrete channel measured
separately).
255 63mm diameter polyethylene gas pipe sleeved in 80mm diameter m 20.70
UPVC pipe and laid in trench including excavation.
257 80mm diameter UPVC pipe sleeve for vertical gas pipe fixed to wall. m 7.60
258 ‘Viking Johnson Junior’ coupling for 50mm diameter galvanised steel no 46.90
gas pipe including locking ring, gasket, etc. and all necessary
accessories.
266 UPVC casing/trunking for water and gas services including trunking m 11.00
cover with splayed edges, overall size 84 x 51mm.
268 22mm diameter copper gas pipe including connectors, elbows, bends, m 14.70
tees, reducers, etc. and fixed to wall with stainless steel
clips/holderbats.
SCHEDULE OF RATES
269 40mm diameter heavy duty galvanised steel pipe (complying with API m 16.70
Standard 5L Grade B Schedule 40) with welded joints and fixed to
wall or ceiling with pipe claps or mild steel brackets.
270 50mm diameter heavy duty galvanised steel pipe (complying with API m 18.90
Standard 5L Grade B Schedule 40) with welded joints and fixed to
wall or ceiling with pipe claps or mild steel brackets.
Heavy duty class 'C' galvanised steel pipes for BS 1387 fixed to duct
wall as dry wet or hosereel riser main including all necessary brackets,
connectors, welded flanges, bolts, nuts and gaskets, etc and testing the
installation :-
274 Extra over 50mm diameter pipe for bend or elbow. no 4.60
277 Extra over 100mm diameter pipe for 100 x 100 x 63.5mm single no 36.90
branch junction.
278 Extra over 100mm diameter pipe for 100 x 50mm bushing/adaptor. no 13.10
Supply and fix heavy duty class 'C' galvanised steel pipes for BS 1387
fixed to duct wall as dry riser including all necessary brackets and
approved welded joints :-
281 Extra over 150mm diameter pipe for 150 x 150 x 63.5mm single no 106.80
branch junction.
282 Extra over 150mm diameter pipe for 150 x 50mm bushing/adaptor. no 30.60
SCHEDULE OF RATES
Rust proof electro galvanised steel box with glass front complete with
locks and master keys (breeching inlet measured separately):
287 Dry riser landing valve with instantaneous 63.5mm diameter female no 89.70
coupling to BS 5041:Part 2 complete with gunmetal bodies to BS
1400 including necessary handwheel, blank caps, chains mechanical
tee connectors/adaptors etc.
289 Approved canvas/nylon belt with key-alike padlocks for strap locking no 5.00
handwheels in closed position.
290 Approved wall mounted double swivel and recessed type fire hose- no 339.40
reel complying to BS 5274 complete with 30m long x 25mm diameter
reinforced braided rubber hose, a jet or spray type shut-off nozzle, gun
metal control valves, wall brackets and fittings including fixing to wall
and painting.
SCHEDULE OF RATES
297 5 kg CO2 portable fire extinguisher to SS 232 complete with horn, no 152.70
wall brackets, PSB label.