Professional Documents
Culture Documents
47711511 (1)
47711511 (1)
7.7 liter, in-line 6 cylinder - 160, 185, 210, 235 and 250 kW
EU Stage V
Durability & low noise • Same engine footprint for all emission standards
Long experience with DPF/SCR systems in combination • Wide range of optional equipment
with great knowledge of base engine development
• Excellent passive soot regeneration
reduces risk of downtime. The in-line six cylinder engine
• Extended oil service intervals 1000h
together with common rail system produces smooth
operation with low noise.
TAD880VE TAD881VE TAD882VE TAD883VE TAD884VE
Power & torque
Power output, kW/hp 160/218 185/252 210/286 235/320 250/340
Maximum torque is reached at low rpm and continues to
at speed, rpm 2210 2210 2210 2210 2210
rated power. The power and torque layout ensures the
Max. torque, Nm/lb/ft 1050/774 1150/848 1225/904 1300/959 1330/981
engine to operate in a wide engine speed range.
at speed, rpm 1400 1400 1400 1400 1400
Technical description
Engine and block
• Cast iron cylinder block
• Replaceable valve guides and valve seats
• Overhead camshaft and four valves per cylinder
1. Engine with common rail fuel 8. Dosage Valve
Lubrication system injection 9. Diesel particular filter
2. AdBlue Pump Unit 10. Muffler with Catalytic Converter
• Full flow cartridge insert filter
3. Solenoid Valve, heating 11. After treatment Control Module
• Gear type lubricating oil pump, gear driven 4. Tank armature with sensors and (ACM)
heater 12. NOx Sensor
Fuel system 5. AdBlue tank, heated 13. Air inlet Temperature Sensor and
• Electronically controlled common rail injectors 6. NOx Sensor pressure sensor
7. Electrical Exhaust Pressure Governor
• Gear driven fuel feed pump
• Electronically controlled common rail injectors All necessary components are available in various lengths and sizes, cables,
heated hoses and tanks. A complete system.
• Fuel pre filter with water separator and water-in-fuel indicator/
alarm
• Manual feed pump on pre filter
Characteristics
Power
Cooling system [kW]
• The instruments and controls connect to the engine via the CAN
SAE J1939 interface. Options available for engine control 150
equipment.
TAD884VE
100
Exhaust after treatment system TAD883VE
TAD882VE
• SCR, DPF+ DOC and uncooled EGR 50
TAD881VE
Dimensions [Nm]
1400
1200
1000
800
1030
600 TAD884VE
TAD883VE
400
TAD882VE
TAD881VE
200
TAD880VE
0
500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500
English 11-2019 © 2019 AB Volvo Penta.
1206 876