Professional Documents
Culture Documents
ax51-030.812.01.03.02
ax51-030.812.01.03.02
o
h
a
V
s
n
m
ie
S
SIRECON
AX
Installation Instructions
SIRECON
08870201
08870193
07119030
07119022
07119014
07049823
07049815
07021350
07008910
07008902
05757377
04776253
04776246
04776220
04776212
04776204
04776196
03831604
03831042
03831034
03136004
03135600
© Siemens 2001
The reproduction, transmission or use
of this document or its contents is not
permitted without express written
authority. Offenders will be liable for
damages. All rights, including rights
created by patent grant or registration
of a utility model or design, are
reserved.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise autho-
rized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated with
or authorized by Siemens or one of its affiliates are directed to contact one of the local
offices of Siemens or one of its affiliates before attempting installation or service proce-
dures.
General Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
The SIRECON housing and OPTILUX tube unit are both equipped with temperature indi-
cators for 37°C and 40°C. They are used as confirmation of whether the image intensifier
has been exposures to excessive temperature during transport from the factory to the cus-
tomer’s location.
Information about which image intensifiers have been equipped with temperature indica-
tors, and beginning at which Serial numbers, is given below, relative to the particular image
intensifier.
Indicators 0
Blue adhesive stickers with a temperature printed on them. The basic color of the inside
square is white (temperature not exceeded). If the admissible temperature is exceeded,
that inside square turns black.
37 C 37 C 40 C 40 C
Fig. 1:
The temperature indicators on the SIRECON housing are located in the vicinity of the iden-
tification labels. These indicators must be read prior to beginning installation.
If one or both indicators on the I.I. housing show that the admissible temperature has been
exceeded by a color change, the 37°C indicator on the OPTILUX tube unit absolutely must
be read. Access to these indicators is described on the following pages.
If exceeding the admissible temperature of 37°C is also found for the I.I. tube, the
OPTILUX tube unit must also be replaced.
Exceptions: SIRECON 40-4 HDR, SIRECON 33-4 HDR-WA, SIRECON 33-4 HDR/W,
SIRECON 33-4 HDR-WD, SIRECON 23-3 HDR-DA,
SIRECON 23-3 HDR-DQ, SIRECON 23-3 HDR-D,
SIRECON 23-3 HDR-DL, SIRECON 23-3 HDR-DX,
SIRECON 17-2 HDR-L (LITHOSTAR 2), SIRECON 23 ISX,
SIRECON 33 MD and SIRECON 33 are replaced completely.
If no change in color is found, remove the temperature indicators on the SIRECON housing
prior to turning the unit over to the customer.
NOTE Return of the SIRECON unit or the OPTILUX tube unit to the
factory must be made with the completed image intensi-
fier-tube unit questionnaire.
Image Quality 0
If the SIRECON unit or the OPTILUX tube unit is replaced, an image quality test must be
performed and documented in the Test Certificate.
ARCOSKOP 0
Procedure:
The I.I. models used in these systems have temperature indicators for 37°C and 40°C that
can be read only from the outside and which are in the vicinity of the identification labels.
Read the two temperature indicators and evaluate them per the following description.
SIRECON 23-DQM 0
SIRECON 23 ISX 0
SIRECON 33 MD 0
SIRECON 33 M 0
1. With this Sirecon, the housing is not a bonded housing, but because of its internal design, the input
screen and the MU metal can be damaged.
Procedure:
The I.I. models used in these systems have temperature indicators for 37°C and 40°C that
can be read only from the outside and which are in the vicinity of the identification labels.
Read the two temperature indicators and evaluate them per the following description.
The following illustrations show the different access paths to the indicators on the OPTILUX
tubes.
SIRECON 17 D-C 0
Fig. 2:
SIRECON 23 D-C 0
Fig. 3:
SIRECON 17-2 M 0
Fig. 4:
SIRECON 23-3 M 0
Fig. 5:
Fig. 6:
Fig. 8: Location of the 33 HDR-WA temperature indicator Fig. 9: 33 HDR-WA temperature indicator
• Remove the cover and power supply and read the temperature indicators as in
(1/Fig. 8 / p. 13) and (1/Fig. 9 / p. 13).
SIRECON 33 ISX 0
Fig. 10: SIRECON 33 ISX temp. indicator removed Fig. 11: SIRECON 33 ISX temp. indicator
Pos. 1 Location of the temp. indicator Pos. 1 Location of the temperature indicator
• The inside indicator can be seen only if the SIRECON is removed from the C-Arm
(AXA3-500.841.01 / Removing the 22 ISX). See AXA3-500.841.01. ... CB-DOC Artis U,
Replacement of Parts.
Fig. 12:
SIRECON 30-2 TH 0
Fig. 13:
Fig. 14:
Fig. 15: Removing the power supply Fig. 16: Temperature indicator
• Take the power supply off the threaded studs and move it down approx. 2 cm
(2/Fig. 15 / p. 16).
¹ The power supply will now be freely movable
• Lift the power supply until the temperature indicators to the right of the cable become
visible (1/Fig. 16 / p. 16) and read the temperature indicators.