Professional Documents
Culture Documents
Base Plate 1 Design Report
Base Plate 1 Design Report
Base Plate 1 Design Report
User Information:
Designer Name: Enrique Villarroel
Company: Municipalidad Coyhaique
Project Name: Placa base 1
Project ID: ICN
Client name: CERRO NEGRO
Project Notes: PLACA BASE TIPO 1
File Name: New file
Design Information:
Steel design code: American Institute of Steel Construction (AISC) 15th Edition
Design method: Load and Factored Resistance Design (LFRD)
Concrete design code: American Concrete Institute (ACI) 318 - 2019
Unit System: Metric
INPUTS:
Geometric Properties :
bf
Description Value
d 101.60 mm
bf,bot 101.60 mm
t 2.95 mm
- Support Depth
- Support Width
Material :
Concrete :
Structural Steel :
Miscellaneous Data :
Reduction Factor :
Ductile Type
Anchor Strength governed by Concrete Breakout, Bond and Side Face Blowout:
DESIGN LOADS:
Note: Input loads should have sign conventions opposite to the Global Axis of the mathematical model
X-axis
Z-axis
Mz
Mz Z-axis
Vz
Vz
Y-axis
Nx Vy My
Vy
My Y-axis
where arrowhead presents as (+) positive direction in (a) X-Y-Z axis (b) Y-Z axis
Load Nx Mz My Vz Vy
Case No. ( kN ) ( kN*m ) ( kN*m ) ( kN ) ( kN )
Bearing Check:
- Area of Support,
- Computation of Value on the all sides than the loaded area support area,
- Governing value of the all sides than the loaded area support area,
Summary of Results
- Computation of Eccentricity
- Computation of Eccentricity
- Bearing Length
Weld Data :
- Weld size
- Total Weld Length parallel to z-axis
- Total Weld Length parallel to y-axis
- Total Weld Length
1 -70.00 -70.00
2 70.00 -70.00
3 70.00 70.00
4 -70.00 70.00
Anchor Parameters:
- The maximum distance from the anchor to one of the closest edge
- The minimum distance from the anchor to one of the closest edge
- Depth of the physical anchor
- The max spacing between the anchors
- Depth of anchor embedment
Anchor Force/s
LOAD CASE - 1
1 0.00
2 0.00
3 0.00
4 0.00
1 0.00 0.00
1 0.00 Ok