Professional Documents
Culture Documents
Fichas Tecnicas Registro Fotografico Parque Solar Atualizado
Fichas Tecnicas Registro Fotografico Parque Solar Atualizado
304-8
Órdenes de Compra de
Materiales Contrato 128
de 2021 a la fecha 10 de
Julio de 2023
Bogotá, 13 de septiembre de 2022
Respetuosamente,
Cordialmente,
*As there are different certification requirements in different markets.please contact your local znshine sales representative for the specific certificates
applicable to the products in the region in which the products are to be used.
KEY FEATURES
Bifacial Technology
Up to 25% additional power gain from back side depending
on albedo.
Founded in 1988, ZNShine solar is a world’s leading high-tech PV module manufacturer.With the advanced production lines, the company boasts module
capacity of 6GW. Bloomberg has listed ZNShine as a global Tier 1 PV module maker. Today Znshine has distributed its sales to more than 60 countries around
the globe.
www.znshinesolar.com
Znshinesolar 12BB HALF-CELL Bifacial
ZXM8-TPLDD132 Series Double Glass Monocrystalline PERC PV Module
DIMENSIONS OF PV MODULE(mm)
I-V CURVES OF PV MODULE(650W)
Barcode 1 25
Cells temp. = 25 °C
20
Drainage holes Incident Irrad. = 1000 W/m²
Mounting holes
Current [A]
15 Incident Irrad. = 800 W/m²
5
Incident Irrad. = 200 W/m²
Barcode 2 0
0 10 20 30 40 50
Mounting holes
Voltage [V]
Junction box
Label P-V CURVES OF PV MODULE(650W)
800
Cells temp. = 25 °C
700 Incident Irrad. = 1000 W/m²
Incident Irrad. = 800 W/m²
Incident Irrad. = 600 W/m²
600 Incident Irrad. = 400 W/m²
Incident Irrad. = 200 W/m²
Power [W]
500
Grounding
Grounding holes
identification 400
300
200
100
*Remark: customized frame color and cable length available upon request Voltage [V]
Nominal Power Watt Pmax(W)* 645 650 655 660 665 670 Solar cells Mono PERC
Power Output Tolerance Pmax(%) 0~+3 0~+3 0~+3 0~+3 0~+3 0~+3 Cells orientation 132(6×22)
Maximum Power Voltage Vmp(V) 37.50 37.70 37.90 38.10 38.30 38.50 Module dimension 2384×1303×35 mm (With Frame)
Maximum Power Current Imp(A) 17.21 17.25 17.29 17.33 17.37 17.41 Weight 38.5±1.0 kg
Open Circuit Voltage Voc(V) 45.00 45.20 45.40 45.60 45.80 46.00 Glass 2.0 mm+2.0mm, High Transmission, AR Coated Heat Strengthened Glass
Short Circuit Current Isc(A) 18.22 18.27 18.32 18.37 18.42 18.47 Junction box IP 68,3 diodes
Module Efficiency (%) 20.76 20.92 21.09 21.25 21.41 21.57 Cables 4 mm² ,350 mm (With Connectors)
*The data above is for reference only and the actual data is in accordance with the pratical testing
*STC (Standard Test Condition): Irradiance 1000W/m², Module Temperature 25℃, AM 1.5 Connectors* MC4-compatible
*Measuring tolerance: ±3%
*Please refer to regional datasheet for specified connector
ELECTRICAL CHARACTERISTICS 丨 NMOT* TEMPERATURE RATINGS WORKING CONDITIONS
Maximum Power Pmax(Wp) 484.90 488.60 492.30 496.10 499.80 503.60 NMOT 43℃ ±2℃ Maximum system voltage 1500 V DC
Maximum Power Voltage Vmpp(V) 35.00 35.20 35.40 35.60 35.70 35.90 Temperature coefficient of Pmax -0.34%/℃ Operating temperature -40℃~+85℃
Maximum Power Current Impp(A) 13.84 13.88 13.92 13.95 13.99 14.03 Temperature coefficient of Voc -0.29%/℃ Maximum series fuse 35 A
Open Circuit Voltage Voc(V) 42.30 42.40 42.60 42.80 43.00 43.20 Temperature coefficient of Isc 0.05%/℃ Front Side Maximum Static Loading Up to 5400Pa
Short Circuit Current Isc(A) 14.71 14.75 14.79 14.83 14.87 14.91 Refer.Bifacial Factor 70±5% Rear Side Maximum Static Loading Up to 2400Pa
*NMOT:Irradiance 800W/m²,Ambient Temperature 20℃,AM 1.5,Wind Speed 1m/s *Do not connect Fuse in Combiner Box with two or more strings in parallel connection
ELECTRICAL CHARACTERISTICS WITH 25% REAR SIDE POWER GAIN * PACKAGING CONFIGURATION **
Front power Pmax/W 645 650 655 660 665 670 Piece/Box 31
Total power Pmax/W 806 813 819 825 831 838 Piece/Container(40’HQ) 558
Vmp/V(Total) 37.60 37.80 38.00 38.20 38.40 38.60 *Remark:Electrical data in this catalog do not refer to a single module and they are not part of the offer.
They only serve for comparison among different module types.
Imp/A(Total) 21.44 21.49 21.55 21.60 21.65 21.70 **Customized packaging is available upon request.
Caution:Please be kindly advised that PV modules should be handled and installed by qualified people who have professional skills
Voc/V(Total) 45.10 45.30 45.50 45.70 45.90 46.10 and please carefully read the safety and installation instructions before using our PV modules.
Add : 1#, Zhixi Industrial Zone,JintanJiangsu 213251,P.R. China Tel:+86 519 6822 0233 E-mail:info@znshinesolar.com
Note: Specifications included in this datasheet are subject to change without notice.ZNSHINE reserves the right of final interpretation © ZNSHINE SOLAR 2021丨Version: ZXM8-TPLDD132 2112.E
No special undertaking or warranty for the suitability of special purpose or being installed in extraordinary surroundings is granted unless as otherwise specifically committed by manufacturer in contract document
NIT. 901.486.304-
Zhengxin photoelectric
1. techonology (Suquian) Paneles solares 660w 3906
Co.,Ltd
Orden de Compra
No. C-1-15345
Al realizar la compra se entiende aprobada la cotización y aceptación de las condiciones comerciales mencionadas el final de la oferta.
PRECIOS EN USD, LA TRM APLICADA SERA AL DÍA DEL PAGO CON EL BANCO DE LA REPUBLICA MAS 30 PESOS POR VOLATILIDAD
PAGOS
• Compras menores a $1.000.000 por consignación bancaria, el cliente debe adicionar $16.000 de comisión bancaria, no aplica comisión a través de transferencias o pago por PAC bancario.
1/1
NIT. 901.486.304-
Inversor Solis-100K-5G-US/100Kw
Three Phase TENMPPT with WIFI&DC
IMPROINDE ENERGY 100KW salida,150Kw en PV, Conectado
1. 25
SAS a la red, salida a 220V Trifase 480V, alta
eficiencia,10 entradas MPPT,1000vdc,
garantía 5 años.
360 grados
Características:
▶▶ Más del 99% de eficiencia máxima
▶▶ Cumplimiento con UL 1741, IEEE1547
▶▶ Rango de voltaje ultra amplio, voltaje de arranque ultra bajo
▶▶ Diseño de 10 MPPT con algoritmo preciso
▶▶ Interrupción de circuito de falla de arco integrado (AFCI)
▶▶ THDi <3% baja distorsión armónica
▶ Antirresonancia, compatible con más de 6 MW en paralelo en
un transformador
▶▶ Solución perfecta de monitoreo de sitios comerciales
567mm
§ 1. References ………… 3
§ 2. Software ………… 3
§ 3. Design Conditions ………… 3
§ 4. Drawing ………… 3
§ 5. Structure's Material ………… 4
§ 6. Design Load ………… 4
6.1 Combinations of Load ………… 4
6.2 Dead Load ………… 4
6.3 Wind Load Calculations ………… 4
6.4 Snow Load Calculations ………… 9
§ 7. Load on sub rail ………… 11
§ 8. Dstructural analysis with SAP2000 V23 ………… 13
2
§ 1.References
Wind Load Design: ASCE/SEI 7-10
Snow Load Design: ANSI/AISC 360-16 AISI-ASD96
§ 2.Software
SAP 2000 V23(Structure Analysis Program 2000)
§ 3. Design Conditions
Module Dimension 2384 × 1303 × 35 mm
Module Weight 38.5 kg
ModuleOrientation Vertical
Module Layout 2 × 11 = 22 pcs
Tilt Angle 10 °
Basic Wind Speed 33.04 m/s (3s gust speed)
Ground Snow Loads 0 Kpa
Terrain Category C
Maximum Height 1.83143 m
Installation Site Ground
Design Standard ASCE 7-10
§ 4. Drawing
The condition of below drawing is the strictest in this project so the load calculation is only based on the below array.
3
§ 5. Structure's Material
§ 6. Design Load
6.1 Combination of Loads
The combination of loadind condition and shall be as given according to ASCE SATANDARD ASCE/SEI 7-10.
4
6.3 Wind Load Calculations
(1) Basic Wind Speed
The basic wind speed, V , used in the determination of design wind loads on buildings and
other structures.The wind shall be assumed to come from any horizontal direction.Values are
nominal design 3-second gust wind speeds in miles per hour (m/s) at 33 ft(10m) above ground
for Exposure C category.
Buildings
Square 0.9
Hexagonal 0.95
Round 0.95
Trussed Towers
1. The hill, ridge, or escarpment is isolated and unobstructed upwind by other similar
topographic features of comparable height for 100 times the height of the topographic feature
(100H) or 2 mi (3.22 km), whichever is less. This distance shall be measured horizontally
from the point at which the height H of the hill, ridge, or escarpment is determined.
2. The hill, ridge, or escarpment protrudes above the height of upwind terrain features
within a 2-mi (3.22 km) radius in any quadrant by a factor of two or more.
3. The structure is located as shown in Fig. 7-4 in the upper one-half of a hill or
ridge or near the crest of an escarpment.
4. H/Lh≥0.2.
5. H is greater than or equal to 15 ft (4.5 m) for Exposures C and D and 60 ft (18 m)
for Exposure B.
5
If site conditions and locations of structures do not meet all the conditions then
Kzt is taken as 1.0
(4) Velocity Pressure Exposure Coefficient
Velocity pressure exposure coefficient Kz shall be determined from Table 6-2. For a site
located in a transition zone between exposure categories, that is, near to a change in ground
surface roughness, intermediate values of Kz , between those shown in Table 6-2, are
permitted, provided that they are determined by a rational analysis method defined in the
recognized literature.Surface roughness categories are in Table 6-3.
Table 6-2
Exposure
Height above ground level, z
B C D
ft (m)
Table 6-3
Surface Roughness Categories
Surface Roughness
Urban and suburban areas, wooded areas, or other terrain with numerous closely spaced
B
obstructionshaving the size of single-family dwellings or larger.
Open terrain with scattered obstructions having heights generally less than 30 ft (9.1
C m). This category includes flat open country, grasslands, and all water surfaces in
hurricane prone regions.
Flat, unobstructed areas and water surfaces outside hurricane prone regions. This
D
category includes smooth mud flats, salt flats, and unbroken ice.
6
The height of this project is 1.83 m, and it belongs to exposure category C ,
So the Kz is taken as 0.85 .
(5) Velocity Pressure
Velocity pressure, qz, evaluated at height z shall be calculated by the following equation:
qz = 0.613 Kz Kzt Kd V2
0.613 0.85 0.85 33.04 2
= x x 1.0 x x
= 483.5 N/m2
Kd: wind directionality factor defi ned in Section = 0.85
Kzt: topographic factor defi ned in Section = 1.0
Kz: velocity pressure exposure coeffi cient defi ned inSection
= 0.85
V: Basic wind speed (m/s) = 33.04
Table 6-6
Wind Direction,γ=0° Wind Direction,γ=180°
Angel Load Case Clear Wind Flow Obstructed Wind Flow Clear Wind Flow Obstructed Wind Flow
7
Notes:
1. CNW and CNL denote net pressures (contributions from top and bottom surfaces) for windward
and leeward half of roof surfaces, respectively.
2. Clear wind flow denotes relatively unobstructed wind flow with blocltage less than or
equal to 50%. Obstructed wind flow denotes objects below roof inhibiting wind flow (>50%
blocltage).
3. For values of θ between 7.5°and 45°, linear interpolation is permitted. For values of θ
less than 7.5°, usemonoslope roof load coefficients.
4. Plus and minus signs signify pressures acting towards and away from the top roof surface,
respectively.
5. All load cases shown for each roof angle shall be investigated.
6. Notation:
L : horizontal dimension of roof, measured in the along wind direction, ft. (m)
h : mean roof height, ft. (m)
γ : direction of wind, degrees
θ : angle of plane of roof from horizontal, degrees
Free Roofs θ≤45°, = 90°, 270°
Notes:
1. CN denotes net pressures (contributions from top and bottom surfaces).
2. Clear wind flow denotes relatively unobstructed wind flow with blockage less than or equal
to 50%. Obstructed wind
flow denotes objects below roof inhibiting wind flow (>50% blockage).
3. Plus and minus signs signify pressures acting towards and away from the top roof surface,
respectively.
4. All load cases shown for each roof angle shall be investigated.
5. For monoslope roofs with theta less than 5 degrees, Cn values shown apply also for cases
where gamma = 0 degrees and
0.05 less than or equal to h/L less than or equal to 0.25. See Figure 27.4-4 for other h/L
values.
6. Notation:
L : horizontal dimension of roof, measured in the along wind direction, ft. (m)
h : mean roof height, ft. (m). See Figures 27.4-4, 27.4-5 or 27.4-6 for a graphical depiction
of this dimension.
γ : direction of wind, degrees
θ : angle of plane of roof from horizontal, degrees
8
where gamma = 0 degrees and
0.05 less than or equal to h/L less than or equal to 0.25. See Figure 27.4-4 for other h/L
values.
6. Notation:
L : horizontal dimension of roof, measured in the along wind direction, ft. (m)
h : mean roof height, ft. (m). See Figures 27.4-4, 27.4-5 or 27.4-6 for a graphical depiction
of this dimension.
γ : direction of wind, degrees
θ : angle of plane of roof from horizontal, degrees
CNW
Case A -0.3
10
Case B 0.3
CNW
Case A -123.2873687
10
Case B 123.2873687
B 0.9 1 1.2
C 0.9 1 1.1
D 0.8 0.9 1
9
In Alaska, in areas where trees do not exist within
0.7 0.8 N/A
a 2-mile (3-km) radius of the site.
The exposure condition of the solar photovoltaic bracket system is Fully Exposed,and it belongs to
exposure category
, C so the Ce is taken as 0.9 .
(3) Thermal Factor
The thermal factor Ct shall be determined from Table 6-8.
Table 6-8
Thermal Condition Ct
Structures kept just above freezing and others with cold, ventilated roofs in
which the thermal resistance (R-value) between the ventilated space and the 1.1
2 2
heated space exceeds 25° F x h x ft /Btu (0.4 K x m /w)
In the snowy condition,the solar photovoltaic bracket system belongs to the unheated
structures, so the Ct is taken as 1.2 .
An importance factor, I (snow loads), for the building or other structure shall be
determined from Table 6-9 based on building and structure categories listed in Table 6-5.
Table 6-9
Category Importance Factor Is
I 0.8
II 1.0
III 1.1
IV 1.2
Solar photovoltaic bracket system belongs to occupancy category I,so the I is taken 0.8
as
(5) Flat Roof Snow Loads
The snow load, Pf , on a roof with a slope equal to or less than 5° (1 in./ft = 4.76°)
shall be calculated in lb/ft2 (kN/m2) using the following formula:
Pf = 0.7𝐶𝑒 𝐶𝑡 𝐼𝑠 𝑃𝑔
10
(6) Roof Slope Factor
For cold roofs with Ct = 1.2 and an unobstructed slippery surface that will allow snow
to slide off the eaves, the roof slope factor Cs shall be determined using the dashed line on
Fig. 6-2c.
10 °, so the Cs is taken1.00
The setting angle of this project is as .
(7) Sloped Roof Snow Loads
Snow loads acting on a sloping surface shall be assumed to act on the horizontal
projection of that surface. The sloped roof snow load, Ps, shall be obtained by multiplying
the flat roof snow load, Pf , by the roof slope factor, Cs.
= 1.00 × 0.0
= 0.0 N/m2
Cs: Roof slope factor = 1.00
Pf: Flat roof snow loads = 0.0 N/m2
11
Case A -0.3429 -0.5388 0.5062 0.7511
10
Case B -0.7675 0.0000 0.8164 0.1959
(3)Snow Load
Load calculation for rail's Snow load:
Qs = Ps× B
= 0.00 × 2.384 / 2
= 0.00 N/m
= 0.0000 kN/m
12
8.Dstructural analysis with SAP2000 V23
8.1 Modeling (Modeling is at 3D model by stereo analysis)
Modeling is at 3D model by stereo analysis Span= 3400
Purlin
13
Column
Bracing
14
8.3 Load analysis
Dead load Long-term linear load = 0.1448 kN/m
15
Downwind load Case A, γ = 180° Linear upwind load = 0.506 / 0.751 kN/m
Downwind load Case B, γ = 180° Linear upwind load = 0.816 / 0.196 kN/m
16
8.3 Stress and deflection test
17
Bending moment of structure (strong axis)
18
Axial force diagram of the structure
Stress contour
Stress ratio
Max stress ratio is less than 1, which satisfies the strength
19
Beam stress ratio
20
Purlin stress ratio
21
Column stress ratio
22
Bracing stress ratio
23
8.4 Calculation of fulcrum reaction force
A. F1, F2 and F3 in the figure refer to forces in the X, Y and Z directions respectively;
B, M1, M2 and M3 refer to bending moments around X, Y and Z directions respectively;
C. The force between the foundation and the column is the relationship between the force and
the reaction force. When the column is subjected to downward tension, the foundation will be
subjected to upward pulling force.
Reaction of supports
Jonit Load cases F1 F2 F3 M1 M2 M3
Text Text kN kN kN kN-m kN-m kN-m
1 D 0.24 0.01 0.80 -0.03 0.09 -0.01
1 D+S 0.24 0.01 0.80 -0.03 0.09 -0.01
1 D+0.6W (Case A, γ = 0°) 0.17 -0.02 -0.37 0.04 0.12 -0.01
1 D+0.6W (Case B, γ =180°) 0.29 0.06 2.53 -0.13 0.05 -0.01
1 0.6D+0.6W (Case A, γ = 0°) 0.08 -0.03 -0.69 0.05 0.08 0.00
1 0.6D+0.6W (Case B, γ =180°) 0.20 0.05 2.21 -0.12 0.01 -0.01
1 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.19 -0.01 -0.08 0.02 0.11 -0.01
1D+0.75*0.6W+0.75S (Case B, γ = 180°) 0.28 0.05 2.10 -0.11 0.06 -0.01
1 D+0.6W (Case B, γ = 0°) 0.14 -0.01 0.72 0.00 0.07 -0.01
1 D+0.6W (Case A, γ =180°) 0.29 0.06 2.53 -0.13 0.05 -0.01
1 0.6D+0.6W (Case B, γ = 0°) 0.05 -0.02 0.40 0.01 0.03 0.00
1 0.6D+0.6W (Case A, γ =180°) 0.25 0.06 1.62 -0.10 0.05 -0.01
1 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.17 -0.01 0.74 -0.01 0.08 -0.01
1D+0.75*0.6W+0.75S (Case A, γ = 180°) 0.32 0.05 1.65 -0.10 0.09 -0.01
3 D -0.21 0.00 0.82 -0.03 -0.03 0.01
24
3 D+S -0.21 0.00 0.82 -0.03 -0.03 0.01
3 D+0.6W (Case A, γ = 0°) 0.23 0.00 -0.14 0.01 0.10 -0.01
3 D+0.6W (Case B, γ =180°) -0.70 0.01 1.54 -0.06 -0.20 0.02
3 0.6D+0.6W (Case A, γ = 0°) 0.32 0.00 -0.47 0.02 0.12 -0.01
3 0.6D+0.6W (Case B, γ =180°) -0.62 0.00 1.21 -0.05 -0.18 0.02
3 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.12 0.00 0.10 0.00 0.07 0.00
3D+0.75*0.6W+0.75S (Case B, γ = 180°) -0.58 0.01 1.36 -0.05 -0.16 0.02
3 D+0.6W (Case B, γ = 0°) 0.20 0.00 -0.95 0.03 0.07 -0.01
3 D+0.6W (Case A, γ =180°) -0.70 0.01 1.54 -0.06 -0.20 0.02
3 0.6D+0.6W (Case B, γ = 0°) 0.28 0.00 -1.28 0.04 0.08 -0.01
3 0.6D+0.6W (Case A, γ =180°) -0.76 0.00 2.40 -0.09 -0.21 0.03
3 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.10 0.00 -0.51 0.01 0.04 0.00
3D+0.75*0.6W+0.75S (Case A, γ = 180°) -0.68 0.00 2.25 -0.08 -0.17 0.02
21 D 0.34 0.00 1.26 -0.03 0.13 -0.01
21 D+S 0.34 0.00 1.26 -0.03 0.13 -0.01
21 D+0.6W (Case A, γ = 0°) 0.23 0.00 -0.74 0.03 0.16 -0.01
21 D+0.6W (Case B, γ =180°) 0.44 -0.01 4.24 -0.12 0.06 -0.02
21 0.6D+0.6W (Case A, γ = 0°) 0.09 0.00 -1.24 0.04 0.11 0.00
21 0.6D+0.6W (Case B, γ =180°) 0.31 -0.01 3.73 -0.10 0.01 -0.01
21 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.26 0.00 -0.24 0.02 0.16 -0.01
21D+0.75*0.6W+0.75S (Case B, γ = 180°) 0.42 -0.01 3.49 -0.10 0.08 -0.01
21 D+0.6W (Case B, γ = 0°) 0.19 -0.03 1.13 0.00 0.09 -0.01
21 D+0.6W (Case A, γ =180°) 0.44 -0.01 4.24 -0.12 0.06 -0.02
21 0.6D+0.6W (Case B, γ = 0°) 0.05 -0.03 0.63 0.01 0.04 0.00
21 0.6D+0.6W (Case A, γ =180°) 0.39 0.01 2.71 -0.09 0.07 -0.01
21 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.22 -0.02 1.16 -0.01 0.10 -0.01
21D+0.75*0.6W+0.75S (Case A, γ = 180°) 0.48 0.01 2.72 -0.09 0.12 -0.02
23 D -0.36 -0.01 1.31 -0.02 -0.07 0.01
23 D+S -0.36 -0.01 1.31 -0.02 -0.07 0.01
23 D+0.6W (Case A, γ = 0°) 0.39 0.01 -0.34 0.00 0.16 -0.01
23 D+0.6W (Case B, γ =180°) -1.20 -0.03 2.53 -0.04 -0.35 0.04
23 0.6D+0.6W (Case A, γ = 0°) 0.54 0.02 -0.87 0.01 0.19 -0.02
23 0.6D+0.6W (Case B, γ =180°) -1.06 -0.03 2.01 -0.03 -0.32 0.04
23 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.20 0.00 0.07 0.00 0.10 -0.01
23D+0.75*0.6W+0.75S (Case B, γ = 180°) -0.99 -0.03 2.23 -0.03 -0.28 0.03
23 D+0.6W (Case B, γ = 0°) 0.36 0.03 -1.74 0.02 0.12 -0.01
23 D+0.6W (Case A, γ =180°) -1.20 -0.03 2.53 -0.04 -0.35 0.04
23 0.6D+0.6W (Case B, γ = 0°) 0.50 0.04 -2.26 0.03 0.15 -0.02
23 0.6D+0.6W (Case A, γ =180°) -1.33 -0.06 4.05 -0.06 -0.37 0.05
23 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.18 0.02 -0.98 0.01 0.07 -0.01
23D+0.75*0.6W+0.75S (Case A, γ = 180°) -1.20 -0.05 3.76 -0.05 -0.32 0.04
37 D 0.34 0.00 1.22 -0.03 0.13 -0.01
37 D+S 0.34 0.00 1.22 -0.03 0.13 -0.01
25
37 D+0.6W (Case A, γ = 0°) 0.24 0.00 -0.70 0.03 0.17 -0.01
37 D+0.6W (Case B, γ =180°) 0.44 0.00 4.08 -0.12 0.07 -0.02
37 0.6D+0.6W (Case A, γ = 0°) 0.10 0.00 -1.19 0.04 0.12 0.00
37 0.6D+0.6W (Case B, γ =180°) 0.30 0.00 3.59 -0.10 0.01 -0.01
37 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.27 0.00 -0.22 0.01 0.16 -0.01
37D+0.75*0.6W+0.75S (Case B, γ = 180°) 0.41 0.00 3.37 -0.10 0.08 -0.01
37 D+0.6W (Case B, γ = 0°) 0.20 -0.02 1.10 -0.01 0.10 -0.01
37 D+0.6W (Case A, γ =180°) 0.44 0.00 4.08 -0.12 0.07 -0.02
37 0.6D+0.6W (Case B, γ = 0°) 0.06 -0.02 0.61 0.01 0.04 0.00
37 0.6D+0.6W (Case A, γ =180°) 0.38 0.02 2.61 -0.10 0.07 -0.01
37 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.24 -0.02 1.13 -0.01 0.11 -0.01
37D+0.75*0.6W+0.75S (Case A, γ = 180°) 0.48 0.01 2.63 -0.09 0.13 -0.02
39 D -0.34 -0.01 1.26 -0.02 -0.06 0.01
39 D+S -0.34 -0.01 1.26 -0.02 -0.06 0.01
39 D+0.6W (Case A, γ = 0°) 0.38 0.01 -0.33 0.00 0.16 -0.01
39 D+0.6W (Case B, γ =180°) -1.14 -0.03 2.43 -0.04 -0.33 0.04
39 0.6D+0.6W (Case A, γ = 0°) 0.52 0.02 -0.83 0.01 0.19 -0.02
39 0.6D+0.6W (Case B, γ =180°) -1.01 -0.02 1.93 -0.03 -0.31 0.03
39 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.20 0.00 0.07 0.00 0.11 -0.01
39D+0.75*0.6W+0.75S (Case B, γ = 180°) -0.94 -0.03 2.14 -0.04 -0.26 0.03
39 D+0.6W (Case B, γ = 0°) 0.34 0.03 -1.67 0.02 0.12 -0.01
39 D+0.6W (Case A, γ =180°) -1.14 -0.03 2.43 -0.04 -0.33 0.04
39 0.6D+0.6W (Case B, γ = 0°) 0.48 0.03 -2.17 0.03 0.14 -0.02
39 0.6D+0.6W (Case A, γ =180°) -1.26 -0.05 3.89 -0.06 -0.35 0.04
39 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.17 0.02 -0.93 0.01 0.07 -0.01
39D+0.75*0.6W+0.75S (Case A, γ = 180°) -1.13 -0.04 3.61 -0.06 -0.30 0.04
53 D 0.34 0.00 1.25 -0.03 0.13 -0.01
53 D+S 0.34 0.00 1.25 -0.03 0.13 -0.01
53 D+0.6W (Case A, γ = 0°) 0.23 0.00 -0.73 0.03 0.16 -0.01
53 D+0.6W (Case B, γ =180°) 0.44 -0.01 4.21 -0.12 0.06 -0.02
53 0.6D+0.6W (Case A, γ = 0°) 0.09 0.00 -1.24 0.04 0.11 0.00
53 0.6D+0.6W (Case B, γ =180°) 0.31 -0.01 3.71 -0.10 0.01 -0.01
53 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.26 0.00 -0.24 0.01 0.16 -0.01
53D+0.75*0.6W+0.75S (Case B, γ = 180°) 0.42 -0.01 3.47 -0.10 0.08 -0.01
53 D+0.6W (Case B, γ = 0°) 0.18 -0.02 1.12 -0.01 0.09 -0.01
53 D+0.6W (Case A, γ =180°) 0.44 -0.01 4.21 -0.12 0.06 -0.02
53 0.6D+0.6W (Case B, γ = 0°) 0.05 -0.03 0.62 0.01 0.03 0.00
53 0.6D+0.6W (Case A, γ =180°) 0.40 0.02 2.69 -0.09 0.07 -0.01
53 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.22 -0.02 1.16 -0.01 0.10 -0.01
53D+0.75*0.6W+0.75S (Case A, γ = 180°) 0.48 0.01 2.71 -0.09 0.12 -0.02
55 D -0.36 -0.01 1.30 -0.02 -0.07 0.01
55 D+S -0.36 -0.01 1.30 -0.02 -0.07 0.01
55 D+0.6W (Case A, γ = 0°) 0.39 0.01 -0.34 0.00 0.16 -0.01
26
55 D+0.6W (Case B, γ =180°) -1.20 -0.03 2.52 -0.04 -0.35 0.04
55 0.6D+0.6W (Case A, γ = 0°) 0.53 0.02 -0.86 0.01 0.19 -0.02
55 0.6D+0.6W (Case B, γ =180°) -1.05 -0.03 1.99 -0.03 -0.32 0.04
55 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.20 0.00 0.07 0.00 0.10 -0.01
55D+0.75*0.6W+0.75S (Case B, γ = 180°) -0.99 -0.03 2.21 -0.03 -0.28 0.03
55 D+0.6W (Case B, γ = 0°) 0.35 0.03 -1.73 0.02 0.12 -0.01
55 D+0.6W (Case A, γ =180°) -1.20 -0.03 2.52 -0.04 -0.35 0.04
55 0.6D+0.6W (Case B, γ = 0°) 0.50 0.03 -2.25 0.03 0.15 -0.02
55 0.6D+0.6W (Case A, γ =180°) -1.32 -0.06 4.02 -0.06 -0.37 0.05
55 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.17 0.02 -0.97 0.01 0.07 -0.01
55D+0.75*0.6W+0.75S (Case A, γ = 180°) -1.19 -0.05 3.73 -0.05 -0.32 0.04
69 D 0.23 0.02 0.82 -0.04 0.09 -0.01
69 D+S 0.23 0.02 0.82 -0.04 0.09 -0.01
69 D+0.6W (Case A, γ = 0°) 0.17 -0.01 -0.39 0.03 0.11 -0.01
69 D+0.6W (Case B, γ =180°) 0.30 0.06 2.63 -0.14 0.05 -0.01
69 0.6D+0.6W (Case A, γ = 0°) 0.08 -0.02 -0.72 0.05 0.08 0.00
69 0.6D+0.6W (Case B, γ =180°) 0.20 0.05 2.30 -0.12 0.01 -0.01
69 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.18 0.00 -0.09 0.01 0.11 -0.01
69D+0.75*0.6W+0.75S (Case B, γ = 180°) 0.28 0.05 2.18 -0.11 0.06 -0.01
69 D+0.6W (Case B, γ = 0°) 0.16 -0.01 0.75 -0.01 0.08 -0.01
69 D+0.6W (Case A, γ =180°) 0.30 0.06 2.63 -0.14 0.05 -0.01
69 0.6D+0.6W (Case B, γ = 0°) 0.07 -0.02 0.42 0.00 0.04 0.00
69 0.6D+0.6W (Case A, γ =180°) 0.24 0.06 1.67 -0.11 0.04 -0.01
69 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.18 0.00 0.77 -0.02 0.08 -0.01
69D+0.75*0.6W+0.75S (Case A, γ = 180°) 0.31 0.05 1.71 -0.10 0.08 -0.01
71 D -0.22 0.00 0.85 -0.03 -0.04 0.01
71 D+S -0.22 0.00 0.85 -0.03 -0.04 0.01
71 D+0.6W (Case A, γ = 0°) 0.24 0.00 -0.15 0.01 0.10 -0.01
71 D+0.6W (Case B, γ =180°) -0.73 0.00 1.60 -0.06 -0.21 0.03
71 0.6D+0.6W (Case A, γ = 0°) 0.33 0.00 -0.50 0.02 0.12 -0.01
71 0.6D+0.6W (Case B, γ =180°) -0.64 0.00 1.26 -0.05 -0.19 0.02
71 D+0.75*0.6W+0.75S (Case A, γ = 0°) 0.12 0.00 0.10 0.00 0.07 0.00
71D+0.75*0.6W+0.75S (Case B, γ = 180°) -0.60 0.00 1.41 -0.05 -0.17 0.02
71 D+0.6W (Case B, γ = 0°) 0.21 0.00 -1.00 0.03 0.08 -0.01
71 D+0.6W (Case A, γ =180°) -0.73 0.00 1.60 -0.06 -0.21 0.03
71 0.6D+0.6W (Case B, γ = 0°) 0.30 0.00 -1.34 0.04 0.09 -0.01
71 0.6D+0.6W (Case A, γ =180°) -0.80 0.00 2.50 -0.08 -0.22 0.03
71 D+0.75*0.6W+0.75S (Case B, γ = 0°) 0.10 0.00 -0.54 0.02 0.05 0.00
71D+0.75*0.6W+0.75S (Case A, γ = 180°) -0.72 0.00 2.34 -0.08 -0.19 0.02
27
NIT. 901.486.304-
08 JUN 2023
PLACE OF BILL(S) ISSUE
BOGOTA
DATED
08 JUN 2023
The printed terms and conditions on this Bill are available at its SIGNED OCEAN NETWORK EXPRESS COLOMBIA
website at www.one-line.com BY:
S.A.
, as agent for and on behalf of
CN>PHONE NUMBER:
311 462 9414 - 315 3508975
E-MAIL: REDUCASASZOMAC@GMAIL.COM
/
CESAR.ROCHA.REDUCASAS@GMAIL.COM
/MERCEDES@BESTCARRIER.COM.CO
NP>PHONE NUMBER:
311 462 9414 - 315 3508975
E-MAIL: REDUCASASZOMAC@GMAIL.COM
/
CESAR.ROCHA.REDUCASAS@GMAIL.COM
/MERCEDES@BESTCARRIER.COM.CO
-------------------------------------------------------------------------------------------------------------------------------------
OCEAN FREIGHT PREPAID
"SHIPPERS' LOAD & COUNT SAID TO CONTAIN
ACORDE AL DECRETOS 2685/99, 2101/08 Y RESOLUCIONES 4240 Y 7941, LA NAVIERA DECLARA QUE EST
E TRANSPORTE TIENE DESTINO FINAL EL DEPOSITO ADUANERO HABILITADO DEL PUERTO DE DESCARGUE.
EL TRASLADO A UN DEPOSITO DIFERENTE ES POR CUENTA Y RIESGO DE LA CARGA Y PARA LLEVARSE A C
ABO, LA NAVIERA DEBE DAR CONSTANCIA DEL PAGO DE LOS FLETES Y RECARGOS A LA AUTORIDAD PORTU
ARIA.
""DESTINATION CHARGES COLLECT PER LINE TARIFF AND OTHER CHARGES TO BE COLLECTED FROM
THE PARTY WHO LAWFULLY DEMANDS DELIVERY OF THE CARGO WITHOUT PREJUDICE TO THE
CARRIER'S RIGHTS AGAINST THE MERCHANT (SEE BACK CLAUSE 1) AS SET OUT AT BACK
CLAUSE 13(1)"""
SIGNED
BY: OCEAN NETWORK EXPRESS COLOMBIA S.A.
, as agent for and on behalf of
Cordialmente,
ZNSHINE
CONECTORES HEMBRAS Y MACHOS
1. POWERTER CHANG 3.850
MC4
ZHOUCO., LTD
Condiciones comerciales
Tiempo de entrega: 30-40 días.
Forma de pago: 50% anticipado - 50% previo al despacho, cuentas de INGAL DE OCCIDENTE S.A.S.
Lugar de entrega: Puesto en ciudad principal. Descargue por cuenta del cliente
Validez de la oferta: 15 días
El organismo de certificación QCERT otorga a DIMEL INGENIERIA SA con identificacion NIT 800080917 el
presente certificado de conformidad de producto, de acuerdo con la siguiente información:
La certificación otorgada está sujeta a los resultados de las evaluaciones de seguimiento anuales tal como se establece en el
Reglamento RG-01
Anexo a este certificado se entrega un documento que contiene 3 hojas donde se describen las especificaciones técnicas de los productos
cerficados. Este certificado solo puede ser reproducido en su totalidad y la validez del mismo se puede consultar en www.qcert.com.co. Este
certificado es para uso exclusivo del titular.
Pagina 1 de 3
Referencial/Reglame Numeral 20.17 del Reglamento Técnico de Intalaciones Eléctricas - RETIE. Resolución 90708 de 30 de
nto agosto de 2013 del Ministerio de Minas y Energía.
Soldadura Según AWS B1.10 1999; AWS D1.3/D1.3M:2008; AWS D1.1/D1.1M 2015
Galvanizado Según ASTM A123
Acabados Galvanizado y/o galvanizado y pintado
Longitud Postes entre 2 y 8 secciones y desde 8m hasta 22 m
Carga de rotura 510kg hasta 2000kg. Según referencia
Exclusiones (*) Ninguna
Usos Elementos estructurales empleados como soporte de conductores eléctricos, para sistemas de
distribución energía
ANEXO CERTIFICADO
Pagina 2 de 3
REFERENCIAS PARTICULARES
Pagina 3 de 3
REFERENCIAS PARTICULARES
Lider de calidad
NIT. 901.486.304-
14 DE FEBRERO DE 2023
Fecha
Cliente REDUCA S.A.S. ZOMAC
Contacto Pedro Ignacio Duarte Trujillo
Teléfono 311-462-94-14
Correo reducasaszomac@gmail.com
Cordialmente.
El producto identificado ha sido evaluado por LENOR COLOMBIA S.A.S y se encontró Conforme
con los requisitos del siguiente referente normativo:
República de Colombia. Resolución 180540 del 30 de marzo de 2010. ANEXO GENERAL
REGLAMENTO TÉCNICO DE ILUMINACIÓN Y ALUMBRADO PÚBLICO (RETILAP) y sus modificaciones
con la Resolución 181568 del 1 de septiembre de 2010, Resolución 182544 del 29 de diciembre de 2010,
Resolución 180173 del 14 de febrero de 2011, Resolución 91872 del 28 de diciembre de 2012, Resolución
90980 del 15 de noviembre de 2013. Resolución 40122 del 8 de febrero de 2016.
Secciones 320, 321 y 395
Esquema de Certificación Nº 5 - ISO/IEC 17067:2013
(*) Todas las Características e Identificación del Producto cubierto por el presente Certificado de
Conformidad se encuentran detalladas en los documentos Anexos que hacen parte de este
Certificado: ANEXO No. 1 que consta de tres (3) páginas y ANEXO No. 2 que consta de una (1) página.
Vigencia: Cinco (5) años a partir de la fecha de Emisión del Certificado sujeto a Seguimientos Periódicos.
**Los seguimientos deberán iniciarse mínimo con tres meses de anticipación a la fecha indicada
_________________________
Director de Certificación
MONICA Firmado
digitalmente por
ALEJANDR MONICA
ALEJANDRA
A CASTILLO
Página 1 de 5
CASTILLO SANCHEZ
Fecha: 2022.12.23
PO.02-F10 V5
Fecha: 2021-01-12
SANCHEZ 11:25:53 -05'00'
ANEXO No. 1
Certificado de Conformidad Nº. CS-LCO-12294-2020S9/515
LUMINARIAS
Página 2 de 5
PO.02-F10 V5
Fecha: 2021-01-12
ANEXO No. 1
Certificado de Conformidad Nº. CS-LCO-12294-2020S9/515
LUMINARIAS
Página 3 de 5
PO.02-F10 V5
Fecha: 2021-01-12
ANEXO No. 1
Certificado de Conformidad Nº. CS-LCO-12294-2020S9/515
LUMINARIAS
Página 4 de 5
PO.02-F10 V5
Fecha: 2021-01-12
ANEXO No. 2
Certificado de Conformidad Nº. CS-LCO-12294-2020S9/515
DRIVERS LED
Página 5 de 5
PO.02-F10 V5
Fecha: 2021-01-12
NIT. 901.486.304-
YENI CONSTANZA
1. MALLAS 10
MIGUEZ TORREZ
Cada paquete de paneles planos tiene una etiqueta con: Nombre del fabricante, descripción
del material, lote de fabricación, nombre de la obra, designación de la norma, esquema,
peso y número de pedido.
EMPAQUE Y ROTULADO
Los paquetes planos tienen un máximo de 50 paneles, amarrados de manera firme y
segura.
Características Dimensionales
Nº de Barras por Malla Diámetro Separación Peso
Longitud Pelos
Designación Longitudinal Transversal Longitudinal Transversal Longitudinal Transversal Nominal
BORNAS Y
1. BRAZO 1 1/2X 1 20MTS C/ COLLARIN 84
TERMINALES
REPRESENTACIONES
1. DUCTO PVC CORRUGADO 6X6mts 272
ELECTRICAS BOGOTA
REPRESENTACIONES
2. DUCTO PVC CORRUGADO 4X6mts 10
ELECTRICAS BOGOTA
REPRESENTACIONES
3. DUCTO PVC CORRUGADO 2X6mts 453
ELECTRICAS BOGOTA
DC ELECTRICOS 10.000
1. Cable 4/0 ACSR
S.A.S mts
Unidad de
Ítem Código Descripción Cantidad
medida
1 PPUN006 PUNTA CAPTADORA 1,50 MTS X 5L8 CON BASE 36.00 unidad
Unidad
Ítem Código Descripción Cantidad de
medida
Unidad
Ítem Código Descripción Cantidad de
medida
RODOLFO NELSON
1. MATERIAL DE RIO ARENA 150
VALDERRAMA
Señores:
CONSORCIO REDENERGY
CL 11 # 15 10
Mocoa, Putumayo
DESCRIPCIÓN UN CANT
PLANTA ELECTRICA TECNODIESEL DE 1250KVA/1000KW NOMINALES (STANDBY) 1125kVA/900
KW (PRIME) MODELO AC1250 , INCLUYE FILTROS, PRECALENTADOR DE CAMISAS, BREAKER
ORIGINAL DE FABRICA 1600 AMPERIOS, TABLERO DE CONTROL DEEP SEE 8210, SISTEMA
UN 3
DE MONITOREO DSE890, FLEXIBLE Y ACOPLES PARA EL SISTEMA DE ESCAPE.
PLAZO DE ENTREGA:
Salida de puerto 30 de junio de 2023
Llegada Puerto 09 de agosto de 2023