Professional Documents
Culture Documents
ABYC Systems. Chapter 4. Diesel II (1)
ABYC Systems. Chapter 4. Diesel II (1)
Diesel II
Fasteners used to couple fittings, such as fuel senders to aluminum tanks shall be made of
_______________? - ANS-300 series stainless steel
Non integral diesel tanks shall be capable of withstanding test pressures, the minimum of which
can be _____ psi - ANS-3
With diesel outboards, no pressurized tanks shall be built into or permanently attached to the
hull
T of F - ANS-T
With outboard diesels, fuel distribution lines shall be installed by the manufacturer when the fuel
tank is _________________ - ANS-permanently installed
Using the fuel hose table, when must one use hose A1-15 or B1-15? - ANS-When the hose will
always contain fuel (delivery/return lines)
If suitable aluminum alloy or stainless steel valves are not available, use ______________, and
connect to aluminum tank by insulated flange or stainless steel nipple - ANS-Non ferrous tubing
Anti-fouling paints containing copper or mercury in any form must not be used on
__________________ - ANS-aluminum