Professional Documents
Culture Documents
DNC settings
DNC settings
Baud 1200
Data bits 7
Parity Even
Stop bits 2
Program start: %
Program end: %
Line start:
Line end: #0D#0A
Skip lines:
Format parameters
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No
CNC Parameters:
You will need to verify all parameters listed below that correspond to your CNC control.
Protocol = Level_2
Auto Filename = NO
Sending Options
Receiving Options
Remote Commands
Log into FactoryWiz Client and select the machine for file transfer.
(Disconnected) Shield 1
2 (Receive Data) Green 2 (Transmit Data)
3 (Transmit Data) Red 3 (Receive Data)
5 (Signal Ground) Black 7 (Signal Ground)
7 (RTS) Brown 5 (CTS)
8 (CTS) Blue 4 (RTS)
6 (DSR) JUMPER
8 (DCD)
20 (DTR)