Professional Documents
Culture Documents
CAE333 FEM set 2
CAE333 FEM set 2
TECHNOLOGY
CIA TEST – I
Date :
PART –A (5 X 2= 10 Marks)
Answer ALL questions.
1 Write the conditions for point collocation method and galerkin method 2 CO1 BL1
2 State the methods of engineering analysis? 2 CO1 BL1
3 Write the potential energy for beam of span L simply supported at ends, 2 CO1 BL1
subjected to a concentrated load P at mid span. Assume EI constant
7. 13 CO1 BL-
(a) The differential equation of a physical phenomenon is given by, 3
Explain Rayleigh Ritz and Galerkin formulation with example 13 CO1 BL-
(b)
2
PART-C (1X14=14 Marks)
Using Rayleigh-Ritz method, determine the expressions for displacement and stress
8.(a) in a fixed bar subject to axial force P as shows in Fig. Take 3 terms in 14 CO1 BL-3
displacement function
(Or)
(b) A Beam AB span l is simply supported at the ends carrying a 14 CO1 BL-3
concentrated load ‘W’ at the centre ‘C’ as shown in figure . Determine
the maximum deflection by using Rayleigh-Ritz method and also
compare with exact solution