Professional Documents
Culture Documents
HB Brochure 1
HB Brochure 1
HB Brochure 1
www.mecoseal.com
What sizEs arE availaBlE?
The HB model seal is stocked in 6 standard inch and 13 metric sizes. These 19 seals can be easily converted for other shaft sizes and all fit within the 6 stocked housing (HSG) sizes. This allows the HB model seals to be sized for shaft diameters 5.07 (129mm) and smaller. See the Stocked HSG# Chart on Page 3 for maximum shaft size for each of the six housings.
Since Woodexs MECO Seal division manufactures many custom shaft seals, we have the capability to fabricate from any material when required. See Sizing Chart on next page for dimensional information. For information on the fully split version of this seal please check our MECO AH model seal brochure.
Stocked HSG#
Each MECO HB Seal housing can accommodate optional shafts up to these limits:
SQ P
HSG # 1 2 3 4 5 6
1.63 (41mm)
C.E.M.A. Standard Sizes (Inches) CEMA Part # A shaft 1.50 HBZ1W4A150 2.00 HBZ2W4A200 2.44 HBZ3W4A244 3.00 HBZ4W4A300 3.44 HBZ5W4A344 4.44 HBZ6W4A444
HSG # 1 2 3 4 5 6
METRIC Standard Sizes (millimetres) Metric Part # A shaft HBZ1W4A157 40 HBZ1W4A177 45 HBZ2W4A197 50 HBZ2W4A217 55 HBZ3W4A236 60 HBZ3W4A256 65 HBZ4W4A276 70 HBZ4W4A295 75 HBZ4W4A315 80 HBZ5W4A335 85 HBZ5W4A354 90 100 HBZ6W4A394 110 HBZ6W4A433
P 137 137 165 165 187 187 197 197 197 235 235
276 276
HSG # 1 1 2 2 3 3 4 4 4 5 5
6 6
SQ MIN 102 102 111 111 130 130 146 146 146 171 171
197 197
SQ MAX 111 111 137 137 159 159 165 165 165 203 203
222 222
W 16 16 19 19 19 19 22 22 22 22 22
24 24
C MIN 144 144 157 157 184 184 206 206 206 243 243
278 278
C MAX 157 157 193 193 225 225 233 233 233 287 287
314 314
HB Z
M O D E L
354
pa r t n u M B E r d E C O d E r
Stock options in Red; Non-stock options in Blue
Shaft Diameter - Integer & 1st 2 decimals, in Inches Rotor Material - A = MECO3000 FDA PTFE (recommended) F = UHMW Stator Material - 4 = Type 304 Stainless; 6 = Type 316L Stainless Elastomer - Choose 1: W = FDA White Silicone; V = Viton E = EPDM Housing (HSG)#: 1, 2, 3, 4 5 or 6 Housing Material - Choose 1: Z = Anodized Aluminum; S = 316L Stainless; P = FDA Nylon
MECO HB
HBZ - Anodized Aluminum Rotor Material MECO3000 (recommended) UHMW Process Conditions TEMPERATURE PRESSURE SPEED TEMPERATURE PRESSURE SPEED 1/64 Axial Motion
HBP - FDA Nylon HBZ - Anodized Alum. Housing -60 to 500F (-50 to 260C) Vacuum to 30 psig (210 kPa) to 250 RPM -178 to 135F (-117 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM HBP - FDA Nylon Housing -35 to 200F (-37 to 94C) Vacuum to 15 psig (105 kPa) to 150 RPM -35 to 135F (-37 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM
HBS - 316L Stainless Steel HBS - 316L Stainless Housing -60 to 500F (-50 to 260C) Vacuum to 30 psig (210 kPa) to 200 RPM -178 to 135F (-117 to 57C) Vacuum to 15 psig (105 kPa) to 50 RPM
Mechanical Capabilities:
1/4 T.I.R. Runout 1/2 Thermal Growth Water Flush or C.I.P. EPDM elastomer -70 to 325F (-56 o 163C) Results may vary with operating conditions - please call for discussion.
Barrier Options below: Air or N2, Typical 1/4 scfm (7 lpm) @ 10 psig (0,7 bar)
Silicone elastomer -178 to 500F (-117 to 260 C) Viton elastomer -75 to 450F (-59 to 232 C)
MECOs design staff or your local distributor can help tailor the HB to your individual needs. Below are a few examples of other MECO seal models.
Split OFS Model Top and Side Entry Solvents Purge Free
Distributed by: