Professional Documents
Culture Documents
Remote Control Dismantle of Cylinder
Remote Control Dismantle of Cylinder
During the process of disassembly of the piston in the picture below parts are numbered
------------------------------------------------------------------------------------------------------------------------------------
1. Operation
When bucket is in open position,disassemble sub-branc connection shaft whic is on the right side
of arm. ( drawing 1 )
1 lower arms
YER
Drawing 1.
Set down heads and arms group with help of crane (such as number 15). Disassemble the parts in
order . (Drawing 2.)
4 M16 bolt
7 Piston shaft
8 Elevator
YER
Drawing 2.
Disassemble the hydraulic hose and bolts and remove the elevator up with crane. (drawing 3. –
drawing 4.)
9 crane hole
8 Elevator
drawing 3.
YER
---------------------------------------------------------------------------------------------------------------------------------------
9 crane hole
8 Elevator
” Hydraulic hoses 16
drawing 4.
YER
For the disassemble piston shaft,loose the M24 bolts (such as showing of number 11). Assemble
the M24 bolts next to straight.Remove the straight up with crane and separate from piston.(drawing
5).Assamble the M16 holding eye on M16 and remove the piston shaft up with crane
12 straight
7 Piston shaft
7 Piston shaft
11 Piston barrel
E
drawing 6.
E
E
drawing 5.
E