Professional Documents
Culture Documents
A 3 NT Model Conversion Sequence List PDF
A 3 NT Model Conversion Sequence List PDF
NT20S(Ver.4)
Go to 1
NT20M-ZA3PC-V4
NT600M
Screen data created on NT20M-ZA3PC (V1 to V4) Convert on
NT600S(Ver.4)
Go to 2
NT20M-ZA3PC-V4
(NTM)
NT600G
Screen data created on NT600G-ZA3PC Convert on NT610G-ZA3PC-V1 (Ver.1.4)
NT610G(Ver.3) NT612G(Ver.3)
Go to 3
(w/o V to V4)
(NTG) *1
NT610C(w/o -V to Ver.2) NTSNT-ZA3PC/DV-V2 * 1 NT600G support software is required to transfer data from the hardware NT600G. An applicable PC is old NEC personal computers. (Refer to Operation Manual.)
NT610C(Ver.3)
Go to 4
(DOS: NTS)
The support software above is included with NT-Series Electric Catalog CD-ROM NT Museum NT-Series Chronological Table Support Tool Download. Screen adjustment may be necessary after conversion between different models, affected by the differences in touch SW mesh size or No. Allocation is required when direct access is changed from Not available to Available. (DOS: NTS Operation Manual)
NT20S(Win)
NT600S(Win)
NT620S(Win)
NT631(-V[])
NT30(Win)
NT31(-V[])
NT30C(Win)
NT31C(-V[])
NT620C/625C(Win)
NT631C(-V[])
(WindowsNTST)
NoteWhen a Large screen model is converted to a smaller screen mode, any part that is out of the screen will be deleted. **Only the screen data of Ver.5 can be transferred from NT20S/600S using NTST. Screen data of Ver.4 can be transferred using DOS NTS.
NT31
NT31C
NT31-V1
NT31C-V1
NT631
NT631C
NT631-V1
NT631C-V1
NT31-V1
NT31C-V1
NT31-V2
NT31C-V2
NT631-V1
NT631C-V1
NT631-V2
NT631C-V2
(WindowsNTST)
(1) Any functional objects out of the screen frame will be deleted when converting data from NT631/C to NT31/C (2)System programs are optionally replaceable.
NS10
NS7/NS12
(NS-Designer)