Tutorial Fimo Canes: Eggs: What You Need

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

TUTORIAL FIMO CANES: EGGS

by Barbara Dezza miniB- Creazioni in Miniatura

WHAT YOU NEED:

Polymer Clay: White / Yellow / White Translucent Roll or similar Blade Tile

STEP 1: . Mix the polymer clay white translucent with little yellow color. 10 parts of white one and four parts of yellow one

STEP 2: Take the white Fimo and, with the help of the roll or a pipe, you make a thin layer. Thick some millimeters

STEP 3: With the blade reduce the layer of polymer clay to a wide rectangle around 3 centimeters.

STEP 4: To the center of the gotten rectangle, you insert the roll of yellow Fimo of the STEP 1.

STEP 5 and STEP 6: To wrap the layer of white polymer clay around the yellow roll then, departing from the center, roll with the fingers lengthening the cane up to around half centimeter of diameter. You slightly cut the two extremities of the cane.

STEP 7:. Your egg cane is ready!. You can cook it in oven to 130 grades for 20 minutes. // All right reserved Its forbidden reproducing, also partially, this document without authorization

You might also like