Professional Documents
Culture Documents
VSA Client - Installation Procedure
VSA Client - Installation Procedure
1.VSA client v 2.5.4 installation and addition procedure 1. Oldtux200 is proxy server for VSA software. Login to oldtux200 2. from otrs07 ssh to oldtux200
ftp client.tar.gz to /tmp of the system ,where vsa clients need to be installed.
To install VSA client on Unix system Prerequisite / - 10 MB free /tmp -150 MB free /var ----100 MB free separate /tmp file system . Then check for 6543 port open in both direction it need to work fine
Verify the output Confirm Ping test worked fine. -> WRS VSACOMM Installed -> Running client ping Got Ping! [pear-vsawrs] -------------------------------------------------------------------------------Hop VSAUUID LOCALTIME HOSTNAME -------------------------------------------------------------------------------1 VSA5080F93E71B611DC9B390011251E497C Wed Oct 3 07:51:52 2007 oldtux133 2 VSAA89DA560C69811DA9D320011251E497C Wed Oct 3 08:50:51 2007 oldtux200 -------------------------------------------------------------------------------Duration: 2s Run dragnet on client
Accept yes
Select host from available hosts list and then click Assign Host(s) to Application And click done
Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)
Select lssecfix
Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)
Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)
select the system then add then Ok VSA client removel procedure
1) rm /etc/e-admin.conf 2) rm -fr /etc/vsa 3) Remove "dragnet" line in root's cron 4) modify /etc/inittab and remove the line with: "vc:2345:respawn:/etc/vsa/bin/vsacomm/vsacomm" 5) kill -HUP xxxx where xxxx is PID of init. Usually it is "1" 6) rm -rf /tmp/vsacomm* /tmp/e-admin*
? instead
[root@oldtux200 client]# pwd /vsa/e-admin/software/client ftp client.tar.gz to < vsa client>/tmp 1. Problem
VSA need separate /tmp file system. If your system doesnt have temporary /tmp need to set FORCETEMP=1
Then save the file 2. problem port is not open check for status and correct it.
this is the problem with port so the system will not work . work resolve the network issue
3.You may not able to WRS server access to any VSA client . Solution Remove and reinstall VSA client on the client system. Then send a mail to brandonm@us.ibm.com for VSA issuses