Professional Documents
Culture Documents
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20.1
| sitemap | about | news | jobs | abbreviations | fun | question | conversion | links | copyright | search | contact |
NPT THREAD
All fittings on this page are described, are provided with NPT thread, according to ASME B1.20.1. The American National Pipe Thread Tapered, is the best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal. NPT has a tapered male and female thread which seals with Teflon tape or jointing compound.
DIMENSIONS OF AMERICAN TAPER PIPE THREAD, WITH SEALANT COMPOUND Dia Nominal NPT 1/16" 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 5" Major Diameter mm 7.895 10.242 13.616 17.055 21.223 26.568 33.228 41.985 48.054 60.092 72.699 88.608 101.316 113.973 141.300 Tapping Drill Size mm 6.00 8.25 10.70 14.10 17.40 22.60 28.50 37.00 43.50 55.00 65.50 81.50 94.30 107.00 134.384 TPI 27 27 18 18 14 14 11.5 11.5 11.5 11.5 8 8 8 8 8 Pitch mm 0.941 0.941 1.411 1.411 1.814 1.814 2.209 2.209 2.209 2.209 3.175 3.175 3.175 3.175 3.175
. ermac.org/fittings/threaded_general.html
1/3
2/7/12
6" 8" 10" 12"
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20.1
168.275 219.075 273.050 323.850 161.191 211.673 265.311 315.793 8 8 8 8 3.175 3.175 3.175 3.175
TYPES OF THREADED FITTINGS BY CLASS AND SIZE Description Class Designation 2000 1/2 - 4 1/2 - 4 1/2 - 4 SCH 80 and XS 3000 1/2 - 2 1/2 - 2 1/2 - 2 SCH 160
Plugs and Bushings are not identified. The ma
Elbows 45 and 90 degrees Tees, Crosses, Coupling Half-Coupling, Cap Pipe Wall
. ermac.org/fittings/threaded_general.html
2/3
2/7/12
Threaded Fittings General - Definition and Details - ASME B16.11 and ASME B1.20.1
Seals the threaded end of fitting.
10. THD Round Head Plug 11. THD Hex Head Bushing Can be used to reduce a threaded fitting. 12. THD Union (MSS SP-83) Unions are primarily used for maintenance and installation purposes. It is a screwed joint design and it consists of three interconnected pieces: two internally threads and a centerpiece that draws the ends together when rotated.
Werner Slken 2008 - 2012. All rights reserved. We can't solve problems by using the same kind of thinking we used when we created them. Albert Einstein | top of page |
. ermac.org/fittings/threaded_general.html
3/3