Professional Documents
Culture Documents
Everflow Turbine Leaflet 1
Everflow Turbine Leaflet 1
500
180 RH
Applications
Designed for raising underground water supplies for
250 RH
200 CH 200 CM
RM 180
450
400
15
MADE TO ORDER
0R H
15
25
0R H
MADE TO ORDER
350
Irrigation Industry Community Domestic & Stock Watering Plus In-Line Pressure Boosting Mine DewateringWaste Water
RM 250
M L 0R 50R XL 1 0R 15
300
12 5L BH
Features
q
250
200
MADE TO ORDER
18
0F
150
150 RH
0R H
HH
25
20 0F HM
100
25 0FH 0F H HM
50
10
200
300
Everflow Direct Coupled Electric Submersible Pumps use the same high quality, high efficiency pumping elements as the line-shaft turbine units and are designed for use in boreholes, riverbanks, in-line pressure boosting applications and dewatering. Standard Everflow Submersible Pumps are suitable for 150mm and larger diameter boreholes and are capable of outputs to 100 litres per second and heads to 230 metres. Higher performance units (covered by grey area of selection guide) are available on a made to order basis. For pumps outside the performances shown contact Everflow Pumps.
As Tyco policy is one of constant improvement, we reserve the right to make specification changes without notice and without incurring liability.
Everflow Axial Flow Propeller pumps are available in sizes from 150 to 1000mm diameter with flows from 50 to 5000 litres per sec. and heads to 25m. Call Everflow Pumps for full details.
Distributed by
180
2950 RPM
450
200 CH 200 CM
RM 180
RH
400
350
15 0R H
MADE TO ORDER
25
0R
MADE TO ORDER
COLUMN AND SHAFTING: Column pipe is mild steel with either screwed or flanged connections in 1.5 or 3 metre sections depending on pump running speeds and bearing spacing requirements. Stainless steel drive shaft is supplied in 1.5 or 3 metre lengths with stainless steel couplings. SHAFT BEARINGS: Water lubricated spiral grooved neoprene rubber shaft bearings are supported by rigid cast bronze bearing spiders fitted at each column pipe coupling giving minimum spacings of either 1.5 or 3 metres over the entire drive shaft. PUMP STAGE CASINGS: Cast iron construction (option of cast bronze) incorporating diffuser vanes and rigid shaft support bearings. These tandem bronze and neoprene rubber bearings combine to give accurate shaft support and abrasion resistance.
15 M L 0R 5 0 R XL 1 0R 15
RM 250
300
12 BH 5L
250
200
MADE TO ORDER
18
150
0R H
20 0F HH
20
0F H M
25 FH 0F H HM
25 0
150
100
RH
IMPELLERS: High efficiency cast bronze impellers are hydraulically and statically balanced for vibration free operation. Tapered stainless steel collets guarantee positive locking of impellers to shaft.
50
10
200
300
250
1450 RPM
200
250 RH
RH 300
400K HH
25 0R M
1 YEAR WARRANTY
Everflow Turbine Pumps are manufactured from premium quality materials and precision manufacturing methods for guaranteed reliability and ongoing performance.
150
MADE TO ORDER
100
250R 250RH M
30 0F 2 5 250 HX 0F FH HM H M 30 300 0F FH XM HM
35 0F H
H H 0F 40 HH 0F 35
40
45 0H H
L H 0K
30
HH 0F HM 0F 30
MADE TO ORDER
50
0 10
INLET STRAINERS: Choice of conical or basket type inlet strainers are available in heavy galvanised mild steel or stainless steel to suit installation type and water quality.