Professional Documents
Culture Documents
Test 3
Test 3
Test 3
Top of Form
It enables the user to map a remote resource with a local drive. It enables the user to share all files with all users and groups. It enables the user to share printers. It enables the user to set more specific security access levels.
Bottom of Form
Top of Form
Which table does a router use to make decisions about the interface through which a data packet is to be sent?
Bottom of Form
Top of Form
A switch receives a frame with a destination MAC address that is currently not in the MAC table. What action does the switch perfor
It sends out an ARP request looking for the MAC address. It floods the frame out of all active ports, except the origination port. It returns the frame to the sender.
Bottom of Form
Top of Form
Which two networking devices are used to connect hosts to the access layer? (Choose two.)
Bottom of Form
5 What is the function of the FCS field in an Ethernet frame? detects transmission errors provides timing for transmission contains the start of frame delimiter indicates which protocol will receive the frame
Top of Form
Bottom of Form
6 adds complexity to networks encourages vendors to create proprietary protocols provides consistent interconnections across networks
Top of Form
Which two statements concerning networking standards are true? (Choose two.)
ensures that communications work best in a single-vendor environment simplifies new product development
Bottom of Form
Top of Form
What type of route allows a router to forward packets even though its routing table contains no specific route to the destination netw
Bottom of Form
8 What is the purpose of logical addresses in an IP network? They identify a specific NIC on a host device.
Top of Form
They are used to determine which host device accepts the frame. They provide vendor-specific information about the host.
They are used to determine the network that the host is located on. They are used by switches to make forwarding decisions.
Bottom of Form
Top of Form
Refer to the graphic. Five PCs are connected through a hub. If host H1 wants to reply to a message from host H2, which statement true? H1 sends a unicast message to H2, but the hub forwards it to all devices. H1 sends a unicast message to H2, and the hub forwards it directly to H2. H1 sends a broadcast message to H2, and the hub forwards it to all devices. H1 sends a multicast message to H2, and the hub forwards it directly to H2.
Bottom of Form
Top of Form
An integrated router can normally perform the functions of which two other network devices? (Choose two.)
11 Which type of address is used in an Ethernet frame header? logical addresses only IP addresses only MAC addresses only broadcast addresses only
Top of Form
Bottom of Form
12 naming scheme IP addressing scheme length of cable runs physical location of networking devices
Top of Form
Which two items are included in a network logical map? (Choose two.)
Top of Form
Which device accepts a message on one port and always forwards the message to all other ports?
Bottom of Form
14 a server hosted by the ISP the router interface closest to the computer
Top of Form
a server managed by a central IT department the switch interface that connects to the computer
Bottom of Form
15 prevents collisions on a local network keeps broadcasts contained within a local network controls which hosts have access to the network controls host-to-host traffic within a single local network 16 type of cable used type of data transmission speed of transmission type of connector required maximum length of cable allowed
Top of Form
What does the 100 mean when referencing the 100BASE-T Ethernet standard?
Bottom of Form
17
Top of Form
Refer to the graphic. What does the router do after it determines that a data packet from Network 1 should be forwarded to Network It sends the data packet as it was received. It reassembles the frame with different MAC addresses than the original frame. It reassembles the data packet with different IP addresses than the original data packet.
It reassembles both the packet and the frame with different destination IP and MAC addresses.
Bottom of Form
18
Top of Form
Host A needs to learn the MAC address of Host B, which is on the same LAN segment. A message has been sent to all the hosts o segment asking for the MAC address of Host B. Host B responds with its MAC address and all other hosts disregard the request. W protocol was used in this scenario? ARP DHCP DNS WINS
Bottom of Form
19
Top of Form
Which term is used to describe the process of placing one message format into another format so that the message can be delivere across the appropriate medium? flow control encapsulation encoding multicasting access method
Bottom of Form
Top of Form
If the default gateway is configured incorrectly on the host, what is the impact on communications?
The host can communicate with other hosts on the local network, but is unable to communicate with hosts on remote networks
The host can communicate with other hosts on remote networks, but is unable to communicate with hosts on the local network There is no impact on communications.
Bottom of Form
21 source IP address
Top of Form
Which address does an NIC use when deciding whether to accept a frame?
source MAC address destination IP address destination MAC address source Ethernet address
Bottom of Form