Professional Documents
Culture Documents
Fest Converter: Technical Data of The Drive
Fest Converter: Technical Data of The Drive
net
Fest converter
Air conditioned reversal converter for mill stand drive of 5,8 MW Digital controller: 6RA70-tank
page 1 of 10
www.fest-ag.net
Parallel connection of two 6-puls bridges assembling of a 12 pulsing balance coil feed for direct current motors of 3,5 MV
page 2 of 10
www.fest-ag.net
Technical details:
page 3 of 10
www.fest-ag.net
Technical details:
page 4 of 10
www.fest-ag.net
FEST converter
Comparison air-/water cooled in the constructive assembling
Service opening on the backside of the cabinet with 6 capacity cells, which can be extracted individually. Depth of the control cabinet: 1000 mm.
Accessibility of the water cooling from the backside and the cutout from ahead. Depth of the control cabinet: 600 mm.
page 5 of 10
www.fest-ag.net
www.fest-ag.net
Scope of delivery:
Automation equipment Visualisation system DC-Thyristor feed for 3 rolling mill drives
Universal-CCS-rack consisting of universal racks and an intermediary edger for rolling of bars, beams and other profiles
page 7 of 10
www.fest-ag.net
page 8 of 10
www.fest-ag.net
HMI for rolling mill drive in the project section rolling mill Kardemir
page 9 of 10
www.fest-ag.net
Scope of delivery:
Settlement of the project Electrical equipment Complete automation with S7 DC-thyristor feed for roll drive, edger, warm coiler, on controls, roller table, tube edge guide Assembly Commissioning and efficiency test in only 3 weeks installation downtime
www.fest-ag.net