Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3

PABT MACHINE TEST I - Control Velocity Test

When I was preparing for SSB, I could not get any information about PABT from anywhere on the net. Now, having been recommended as an F(P), I wish to explain people what PABT is all about. Pilot Aptitude Battery Test: This test aims at judging the basic skills needed by a person to qualify as a pilot. In this test, the most important things judged are How attentively you listen to a session and how you answer the simple questions that follow ? What amount of focus you have in attempting questions correctly while keeping the wrong ones as low as possible ? Do you have a keen interest in knowing about a plane ? This test is conducted in 2 parts: 1.Written Test : This test itself consists of 2 parts

a)Apparatus Reading Test: In this test the 6 basic measuring instruments of an aero plane are shown and explained to the candidates. These are: I) Magnetic compass II) Artificial Horizon III) Altimeter IV) Turn or Bank Indicator V) Climb and Descent indicator VI) Air Speed Indicator These instruments are explained in complete detail containing each and every point needed for successfully qualifying the test. Hence, the candidates should listen to the officer with very receptive mind and make sincere efforts to understand every detail that is being imparted to them. Also they should keep away from silly questions and also try their level best to clarify whatever doubt they have, whenever the Officer asks them. b)Plane position test: In this test, the candidate is explained various positions that the plane travels and the regions of the plane that are visible from the front when the its travelling in these positions. These are: East, West, North, South, NW, NE,SW,SE Climbing up(elevating), Descending(moving down) The different parts of the plane that help in identification are: Nose(painted white) Top T(at the tail) Belly Wings Black dot(tail) Now, once he has explained to you the various portions of the plane, hed show you the different positions that the plane travels (the different directions mentioned earlier). Remember some points very well : If you see the nose of the plane, the plane is coming towards you and it is taken as moving towards south. If you see the black dot of the plane, the plane is going away from you and it is taken as moving towards north. If you see the plane moving in such a way that the nose is to your right and tail to your left, than the direction is taken as moving towards east. If you see the plane moving in such a way that the nose is to your left and tail to your right, than the direction is taken as moving towards west. Now, when the direction has been identified the next observation has to be the ascent/descent. For East-West movement If the nose is at a lower horizontal level than the tail, than the plane is surely losing height or descending. If the nose is at a higher horizontal level than the tail, than the plane is surely gaining height or ascending. For North-South movement North (you see the black dot or the tail): If you see the belly of the plane, than the plane is losing height.

If you see the entire top portion of the plane than the plane is gaining height. South (you see the nose): If you see the belly of the plane, than the plane is gaining height or ascending. If you see the top of the plane, than its losing height or descending. The same information can be extended to identify movement in NW, NW, NE, SE, SW directions. The candidates that come out as successful in the written test are taken for machine testing. 2.Machine Test: This test judges the reflexive capabilities of a candidate in response to external stimuli. In this test, the locomotive and sensory abilities of the candidates are put to examination. Each of the two constituent tests aims to find the eye-ear-hand-feet coordination of the person. Hence, you can come out successful only when you grasp the maximum in the shortest time and also apply the same within the short time duration. In each test, the candidate is given 3 chances to come up with good scores. The best score is counted of all the three. Each turn is of 90 seconds in test 1 and 60 sec in test 2. II)Control Velocity Test: In this test, a spot of light (red) is to be superimposed on a series of yellow lights running on the screen from top to bottom. Whenever there is a successful superimposition, there is a small blip in the headphone. The more times you succeed in superimposing the red ball on the yellow balls, the more points you get.

You might also like