Professional Documents
Culture Documents
Link Budget Calculator Latest (2) TND
Link Budget Calculator Latest (2) TND
Frequency Distance (Hop length) Fresnel radius Obstruction Height Earth Buldge Safety factor (assumption tree will grow at least 2 meter in near future) Minimum antenna height to clear 100% LoS Tower height for 60% clearance Tower Height for 100 % clearance 2.4 GHz 8.00 16.06 23.00 1.26 1.00 41.32 25 41
Link Budget Distance Free space Loss Threshold sensitivity (dBm) Transmit power (dB) Antenna gain(dBi) Cable and connector losses(dB) Receive level Fade Margin 4.6 113.3 -70 17 24 -1 -46.3 23.7
Formula Minimum fade margin require in worst cases 0.1 dB per Km source Receive level = Tx power+Gtx-Ltx-Lfs-Lm+Grx-Lrx source Fade Margin = Rx Level - Threshold sensitivity Free space Loss = 92.4+20Log(fxD) D is in Km and F is in GHz Fresnel radius= sqrt(32.25xD) D is Km this formula is valid only for 2.4 GHz
Inputs
Results
1 2 3 4 5 6 7 8
7.2
Formula
Minimum fade margin require in worst cases 0.5 dB per Km source Receive level = Tx power+Gtx-Ltx-Lfs-Lm+Grx-Lrx source Fade Margin = Rx Level - Threshold sensitivity Free space Loss = 92.4+20Log(fxD) D is in Km and F is in GHz Fresnel radius= sqrt(12.93xD) D is Km this formula is valid only for 5.8
Inputs
Results
2.54 1.65 1 2 3 4 5 6 7 8 14 15 16 -74 -75 -76 -77 -68 -65 -70 -64
17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 54
Link Budget Distance Free space Loss Threshold sensitivity (dBm) Transmit power (dB) Antenna gain(dBi) Cable and connector losses(dB) Receive level(dB) Fade Margin(dB) Formula
15.0
Minimum fade margin require in worst cases 0.5 dB per Km source Receive level = Tx power+Gtx-Ltx-Lfs-Lm+Grx-Lrx source Fade Margin = Rx Level - Threshold sensitivity Free space Loss = 92.4+20Log(fxD) D is in Km and F is in GHz Fresnel radius= sqrt(12.93xD) D is Km this formula is valid only for 5.8
Inputs
Results
Test Case Id
AP_San_001 AP_San_002 AP_San_003 AP_San_004 AP_San_005 AP_San_006
Verify that node is successfully rebooted if it is reset from external button; and it shall come-up successfully with default parameters. Verify that LAN Ports LED will not Blink if there is no data transmission going on.
Verify that every time the node comes up successfully after doing multiple power cycle while data transfer is going on.
Test Case Id
AP_Cov_001 AP_Cov_002 AP_Cov_003 AP_Cov_004
1.1.1
Test Case Id AP_Func_001 AP_Func_002
AP_Func_011 AP_Func_012
Verify that all the Wi-Fi Clients searches the AP25 SSID successfully on different value of RSSI, RF Channels and Channel BW. Verify that site survey is started successfully and it displays the other APs.
AP_Func_013 AP_Func_014 AP_Func_015 AP_Func_016 Verify that Data transfer (FTP download from internet) to all the Wi-Fi connected clients of 802.11 b/g and 802.11n successfully simultaneously. Verify that AP25 system logs can be received to a system/device if its ip and port no is provided in Logging ip address and Logging Port Verify that one or more APs can be selected successfully after site survey. Verify that Data Transfer is successful while RSSI degrades.. Verify that Data Transfer starts every time when the Ethernet cable is pluggedout/plugged-in or node is rebooted or power-cycled.
AP_Func_017
1.1.2
Test Case Id AP_Acl_001 AP_Acl_002 AP_Acl_003
1.1.3
Test Case Id AP_DHCP_001 AP_DHCP_002
AP_DHCP_003
AP_DHCP_004 AP_DHCP_005
1.1.4
AP_Encr_007
AP_Encr_008
Test Case Title Verify that WEP works fine when WEP security mode is open Verify that WEP works fine when WEP security mode is shared Verify that WEP works fine when WEP security mode is auto Verify that WPA works fine with different modes of enhanced security like 802.1X,WPA,WPA2 and auto. Verify that WPA works fine with different modes of enhanced security like 802.1X,WPA,WPA2 and auto. Verify that wireless link between AP25 and a device is successful while both WPA Master Rekey and WPA rekey int are configured in WPA mode while passphrase (PSK Key) is present Verify that wireless link between AP25 and a device is successful while both WPA Master Rekey and WPA rekey int are configured in WPA2 mode while passphrase (PSK Key) is present Verify that wireless link between AP25 and a device is successful while both WPA Master Rekey and WPA rekey int are configured in 802.1X mode while passphrase (PSK Key) is present Verify that the Personal Shared key(PSK) can be used to connect a device to AP25 Verify that the Personal Shared key(PSK) can be used to connect a device to AP Verify that successful Wi-Fi link established by the clients without security key. Verify that successful Wi-Fi link established by the clients with security key (WEP or WPA). Verify that Wi-Fi link comes-up successfully while back to back connect/disconnect of the specific SSID. Verify Radius server RSN preauth parameter Verify Radius server EAP reauth period parameter Verify Radius server will not work if Auth Server Ip is not provided Verify Radius server will not work if shared secret is not provided
1.1.5
Test Case Id AP_Radio_001 AP_Radio_002 AP_Radio_003
AP_Radio_005 AP_Radio_006 AP_Radio_007 AP_Radio_008 AP_Radio_009 AP_Radio_010 AP_Radio_011 AP_Radio_012 AP_Radio_013 AP_Radio_014 AP_Radio_015
To test the step reduction of the output power for AP25 in case of IEEE802.11b To test the step reduction of the output power for AP25 in case of IEEE802.11g To test the step reduction of the output power for AP25 in case of IEEE802.11n Sensitivity Test for AP25 in case of IEEE802.11g Sensitivity Test for AP25 in case of IEEE802.11n To test the modulation spectrum by using the MIMO technique Verify the Receive signal strength or AP25 in case it is configured in IEEE802.11b mode Verify the Receive signal strength or AP25 in case it is configured in IEEE802.11g mode Verify the Receive signal strength or AP25 in case it is configured in IEEE802.11n mode Verify that Data Transfer is successful while Channel is interfered with Adjacent and Co-Channel interference. Verify that WebGUI will be accessible and managed with different types of interference levels.
1.1.7
Test Case Id AP_Usec_001 AP_Usec_002
AP_Usec_003
AP_Usec_004 Verify that Skype, GTalk, Messenger application will work successfully when a laptop or mobile is connected to an AP25 with clear voice quality. Verify that user is able to access the internet using different types of OSbased smart-phones (Windows Mobile, Google Android, Apple iOS, Nokia Symbian) and run various multimedia services.
AP_Usec_005
1.1.9
Test Case Id
AP_Load_001 AP_Load_002
AP_Throu_001
AP_Throu_002
AP_Throu_003
AP_Throu_004
AP_Throu_005
AP_Throu_006
Verify the data rates achieved between an AP25 configured as Master and another AP25 configured as client when both are configured in 802.11g mode in field condition and Encryption is enabled. Also While GSM load is working in system Karenda as master and Kh Verify the data rates achieved between an AP25 configured as Master and another AP25 configured as client when both are configured in 802.11n mode in field condition and Encryption is enabled. Also While GSM load is working in system Karenda as master and Kh Verify the data rates achieved between an AP25 configured as Master and another AP25 configured as client when both are configured in 802.11gn HT20 mode in field condition and Encryption is enabled. Also While GSM load is working in system Verify the data rates achieved between an AP25 configured as Master and another AP25 configured as client when both are configured in 802.11gn HT40+ mode and Encryption is enabled. Also While GSM load is working in system Verify the data rates achieved between an AP25 configured as Master and another AP25 configured as client when both are configured in 802.11gn HT40mode in field condition and Encryption is enabled. Also While GSM load is working in system Generate the Broadband load in 802.11n mode, GSM load and GPRS load simultaneously for 2 hours and check the stability of system.
Verify that AP25 works successfully when startup mode is configured as Multi AP Verify that AP25 works successfully when startup mode is configured as Multi VLAN Take care while performing Verify that on Enabling Management VLAN connection to the AP gets lost Verify the functionality of AP scan when different country is selected Verify that site survey is started successfully and it displays the other APs when AP25 configured in Root Mode Verify that site survey is started successfully and it displays the other APs when AP25 configured in Client Mode Verify that Data Transfer is successful while RSSI degrades. Verify that Data Transfer starts every time when the Ethernet cable is pluggedout/ plugged-in or node is rebooted or power-cycled. Verify that Wi-Fi links are established successfully for both 802.11 b/g and 802.11n clients simultaneously. Verify that Clients will be connected even if SSID is blank.
Verify that Wi-Fi links are established successfully for both 802.11 b/g and 802.11n clients simultaneously. Verify that AP25 configured in Master Mode is able to connect to an AP of other vendor configured in Client mode Verify that AP25 configured in Client Mode is able to connect to an AP of other vendor configured in Master mode
AP_OAM_009 AP_OAM_010 AP_OAM_011 AP_OAM_012 AP_OAM_013 AP_OAM_014 AP_OAM_015 AP_OAM_016 AP_OAM_017 AP_OAM_018 AP_OAM_019 AP_OAM_020 AP_OAM_021 AP_OAM_022 AP_OAM_023 AP_OAM_024 AP_OAM_025 AP_OAM_026
Verify that the factory default works successfully(from webgui) Verify that all the Wi-Fi Clients searches the AP25 SSID successfully on different value of RSSI, RF Channels and Channel BW. Verify that 8 different virtual APs can be selected from VAP configuration Verify that SSID is changed successfully and end node shows the changed string while searching. Verify that SSID value is configured successfully with different alpha numeric combinations and for special symbols. Verify that VLAN ID is configured successfully with different vlaues and combinations. Verify that VLAN PRIORITY is configured successfully with different vlaues and combinations. Verify that different security schemes like WEP,WPA are configured successfully and check it works fine while connecting with the multiple clients. Verify that the Web GUI will not be opened for the incorrect Password. Verify that change password is possible through Web GUI for different combination of Alphanumeric characters with special characters. Verify that change of password is successfully done through Web GUI and GUI opens after power cycle of the node with correct user name and password. Verify that firmware upgrade is successful from webgui Verify that AP25 doesn't get hanged/inaccessible if it is rebooted in between a firmware upgrade procedure Verify that AP25 doesn't get hanged/inaccessible if Ethernet cable gets disconnected in between a firmware upgrade procedure Verify that AP25 doesn't get hanged/inaccessible if the upgrade fails when a corrupt image is selected for firmware upgrade Verify that WEP primary key values are configured with alphanumeric and special characters and a combination of both Verify that WPA rekey int doesnt accept any alphabet or special character or combination of both Verify that WEP rekey int doesnt accept any alphabet or special character or combination of both Verify that PSK key value ranges between 8-64 characters Verify that Radius support can be enabled disabled successfully from webgui RSN preauth for roaming can be enabled/disabled from webgui Verify different values of EAP reauth period Verify that Auth Server Ip doesnt accept any alphabet or special character or combination of both Verify that port no doesnt accept any alphabet or special character or combination of both Verify that shared secret is possible through Web GUI for different combination of Alphanumeric characters with special characters. Verify that ACL enable disable is possible from webgui Verify that ACL is enabled successfully and add MAC List. Verify that upload of MAC address list as a file successfully using Web GUI and all the clients are working fine while ACL is enabled.. Verify that AP25 configuration can be downloaded Verify that AP25 configuration can be uploaded Verify that AP25 will not get hanged or inaccessible when restore button is pressed while a new configuration is being uploaded
AP_OAM_038 AP_OAM_039 AP_OAM_040 AP_OAM_041 AP_OAM_042 AP_OAM_043 AP_OAM_044 AP_OAM_045 AP_OAM_046 AP_OAM_047 AP_OAM_048 AP_OAM_049 AP_OAM_050 AP_OAM_051 AP_OAM_052 AP_OAM_053 AP_OAM_054 AP_OAM_055 AP_OAM_056 AP_OAM_057
AP_OAM_058 AP_OAM_059 AP_OAM_060 AP_OAM_061 AP_OAM_062 AP_OAM_063 AP_OAM_064 AP_OAM_065 AP_OAM_069 AP_OAM_070
Verify that AP25 will not get hanged or inaccessible when restore button is pressed while a configuration is being downloaded Verify that AP25 will retain the old configuration if it is rebooted while a new configuration is being uploaded Verify that AP25 will retain the old configuration if it is rebooted while its configuration is being downloaded Verify that UpNp enable disable is possible from webgui Verify that System logging enable disable is possible from webgui Verify that Logging port value ranges between 1-65535 Verify that SNMP can be enabled disabled from webgui Verify that System Day, Date and Time can be configured manually Verify that System Time displays correct Day, date and time in accordance to the set values Verify that System status shows correct values of all the parameters(system info, LAN settings, services and wireless)configured