Professional Documents
Culture Documents
Core Catalog
Core Catalog
com
Features
Unique wheel design allows for a tighter turning radius and easier maneuvering to simplify spotting. Slip-resistant platform provides a selfcleaning, slip-resistant surface for improved safety. Platform has heavy rubber bumpers on contact surface to protect vehicles from damage. Tow bar allows easy moving or repositioning. Proper setup requires the support of a vehicle before climbing.
1-866-433-0027
Portable Freestanding Truck, Rail & Hopper Car Access Units AC8
How it works
Easily push the unit up to the parked truck or rail car you need to access. Raise the safety cage above the height of the vehicle. Position the AC8 where the safety cage surrounds the area needing to be accessed. Secure the position of the AC8 by lowering the leveling jacks on each corner of the base. Lower the safety cage so the protective bumpers rest on the vehicle. Now you can safely access the vehicle - yes, its that easy!
Features
Freestanding design does NOT have to rest on vehicle for support. Unique wheel design allows for a tighter turning radius and easier maneuvering to simplify spotting. Serrated decking on platform provides a self-cleaning, slip-resistant surface for improved safety. Tow bar allows easy moving or repositioning. 500 lb. load capacity.
www.CoreTerminalProducts.com
Features
Complies to OSHA regulations. Access racks are constructed from galvanized steel. Available as single or double-sided units specifically engineered for accessing rail cars or tank trucks.
PLATFORM 4 X 6 4 X 6
PLATFORM SYSTEMS
1-866-433-0027
Features
Available in single or double-sided systems. Available in tracking or fixed position models. Optional canopy available for weather protection. Optional swing gates help prevent accidental falls.
Liability Notice
When a truck rolls onto your business property, you are held accountable for the safety of the individuals who load your goods onto that flatbed, regardless of for whom he or she works!
www.CoreTerminalProducts.com
Where it is used
AB-100 Series flat ramp is to be used at loading racks where the vehicles to be accessed are of the same height and type.
Where it is used
AB-100T Series flat ramp with an extension is to be used at rail car loading racks where there is a variation in vehicle size but no height. Example - Asphalt loading terminal who loads rail car of different sizes. The height of the rail car stays the same but the width changes.
5
Example - Dry bulk plant loading dry products into hopper cars.
WIDTH 24 24 24 24 24 24
WIDTH 24 24 24
1-866-433-0027
Stair
Features
Padded lower edge helps prevent vehicle damage. Open serrated slip-resistant walk surface maximizes footing in all climates. Requires little maintenance and is repairable in the field. Face mounted as standard; optional top, pivoting, or track mounted available. Optional power operated system available pneumatic, hydraulic, or hand winch. Covered by Core Terminal Products' 2 year warranty.
Where it is used
ST Series Stair is our most versatile access ramp. It accommodates height variations in most tank cars, tank trucks, and hopper cars. Example - Food processing plant that needs to access both rail cars and tank trucks. The ST Series can access both vehicles. Our cages meet OSHA regulations for the required fall prevention equipment needed while accessing the top of trucks and rail cars.
VEHICLE USED ON Truck Rail car Rail car Rail car
Safety Cages
6
Track Mounting
MODEL NO. WIDTH STEPS ST 403 ST 404 ST 405 ST 406 ST 407 ST 408 24 24 24 24 24 24 3 4 5 6 7 8 GALVANIZED LBS. 264 306 350 386 490 530 ALUMINUM LBS. 173 197 222 328 340 352 PAINTED STEEL LBS. 251 290 330 370 466 506
This allows the gangway to move along the side of the loading platform, allowing virtually unlimited access to one or multiple vehicles.
www.CoreTerminalProducts.com
Visit our website to build a loading arm to your own specifications and receive a quote from one of our loading arm advisors
1-866-433-0027
S20
S30
S40
S50
S60
S70
S10
S80
1. STYLE: The first step in ordering a swivel joint is to determine the style you need. The swivel joint industry has developed a common listing for swivel joint styles, which are determined by the number of swivels and elbows in the assembly. 2. SIZE: We offers swivel joint that range in size from 2 24. 3. BODY MATERIAL: Our basic offering of swivel joint materials include Carbon Steel, Stainless Steel, and Aluminum. Should product or temperature compatibility require a different material, we are experienced in producing swivel joints in a variety of exotic materials. 4. INLET CONNECTION: This refers to any connection fitting attached to the inlet end of the swivel. Basic swivels include buttweld end connections.
5. OUTLET CONNECTION: Same as above, except for the outlet connection of the swivel. 6. SEAL MATERIAL: Our basic offering of seal materials includes Buna, Viton, and PTFE. Should product or temperature compatibility require it, different materials are available. 7. APPLICATION INFORMATION: Please supply the following information which will allow us to ensure that the swivel joint you are ordering is ideal for your specific application. Product being handled Maximum temperature Operating pressure
NEW PART NUMBERS! In order to create some uniformity with our swivel joint part numbers, we have developed a numbering system that corresponds with steps 1-7 above. The illustration below shows how to build the part number.
S20 S20 S40 S60 S10 S30 S50 S70 S80 02 02=2 04=4 08=8 12=12 20=20 03=3 06=6 10=10 16=16 24=24 1 0=CST 1=SST 01 01
www.CoreTerminalProducts.com
Features
Available in 10, 11, or 12 widths by 20' or 40 lengths. Pans may be placed end to end for continuous coverage. Pans are manufactured of heavy gauge carbon steel.
The most economical way to help prevent contamination to thousands of dollars worth of product from loading into the wrong container.
1-866-433-0027
Where it is used
The perfect solution to reaching areas that require frequent access. Cage ladders require less area and are quicker and safer than conventional ladders.
Features
Ladders are available with either flared or non-flared top. Available in aluminum, steel (galvanized, primed, mill, or painted), and stainless steel to meet specific environmental requirements. Holdout brackets are standard. One pair per 10 on steel ladders; one pair per 6 on aluminum ladders.
10
Swing Gates
Security Covers
Rest Platform
Handrails to Roof
www.CoreTerminalProducts.com
Process Workstands
Ladder type workstands afford easy access within a smaller footprint, saving valuable work space. Designed to meet the most demanding industrial access requirements.
11
Features
Available in aluminum, steel (galvanized, primed, mill, or painted), and stainless steel. Aggressive tread decking for improved slip-resistance in most weather conditions.
1-866-433-0027
Process Workstands
Rugged Aluminum Workstand
Features
Large 8" x 16" embossed platform. 4" deep slip-resistant ribbed steps provide sure footing. Each step is braced front and back with 4 gussets and attached with16 rivets for added strength and durability. Slip-resistant rubber treads attached to heavy-duty aluminum angle feet provide sure footing.
MODEL 802-24
HEIGHT 24
PLATFORM SIZE 16 X 8
BASE SIZE 19 X 18
LBS 7
12
www.CoreTerminalProducts.com
Features
OSHA and/or ANSI standards as we interpret them. Can be customized to meet your specific needs. Available in aluminum, steel (galvanized, primed, mill, or painted), stainless steel, and corrosion-resistant, nonconductive fiberglass. All units come standard with an aggressive tread decking for improved slip-resistance in most weather conditions. Available fully welded/assembled or knocked down.
13
1-866-433-0027
Step 2.
Step 3.
Step 4.
Galvanized
Fiberglass
Step 5.
Step 6.
14
Purchase Order Number:
___________________
Contact Information
Name:______________________________________________________________________ Company:____________________________________________________________ Phone Number:___________________________________________________________ E-mail Address:_____________________________________________________________ Address:_______________________________________________________________________________________________________________________________________ City:_________________________________________________________________________ State:____________________________ Zip:_____________________________________
www.CoreTerminalProducts.com
Where it is used
Multi-Access Component Systems can be used to create a custom crossover or platform to fit specifically to your requirements.
15
Meets OSHA/ANSI
Features
Meets OSHA/ANSI requirements Aluminum construction - strong, lightweight equipment that saves on freight and allows easy configuration. Aluminum construction with stainless steel fasteners. All platforms are pre-drilled at 30 increments to allow easy configuration. Aggressive Alco-Lite slip-resistant aluminum decking improves footing. 50 lbs./sq. ft. weight capacity.
1-866-433-0027
System Components
(MASU) Stair Unit (MAPU) Platform Unit (MAPR) Platform Railing (MASR) Stair Railing 18 to 81 high 30, 60, & 120 lengths match platform length match stair unit number (T-ADPT) T-Adapter to attach platform unit to side of platform in a T or L configuration (allows handrail connections). (S-ADPT) Stair Adapter to attach stair unit to platform when using only one handrail. Stair Units (MASU)
16
Platform Railings (MAPR)
PRICE $93.00 $99.00 $104.00 $110.00 $115.00 $166.00 $188.00 $210.00
STAIR UNITS
MASU-02 MASU-03 MASU-04 MASU-05 MASU-06 MASU-07 MASU-08 MASU-09 MODEL HEIGHT TO PLATFORM 18 27 36 45 54 63 72 81 # OF STEPS 2 3 4 5 6 7 8 9 PLATFORM WEIGHT CLEARANCE LBS. 12 9 21 16 30 24 39 32 48 40 57 48 66 56 75 64 PRICE $137.00 $206.00 $263.00 $321.00 $377.00 $441.00 $499.00 $555.00 MODEL MASR-02 MASR-03 MASR-04 MASR-05 MASR-06 MASR-07 MASR-08 MASR-09
STAIR RAILINGS
USE WITH STAIR UNIT MASU-02 MASU-03 MASU-04 MASU-05 MASU-06 MASU-07 MASU-08 MASU-09 WEIGHT LBS. 6 8 9 11 13 17 21 26
PLATFORM RAILINGS
USE WITH PLATFORM UNIT MAPU-30 MAPU-60/120 WEIGHT LBS. 14 21 PRICE $134.00 $154.00
T-Adapter (T-ADPT)
STAIR ADAPTER
MODEL S-ADPT USE WITH PLATFORM UNIT MASU-02 WEIGHT LBS. 1 PRICE $28.00
T-ADAPTER
USE WITH PLATFORM UNIT MASU-02 WEIGHT LBS. 3 PRICE $61.00
S-Adapter (S-ADPT)
www.CoreTerminalProducts.com
17
tread. All components are field repairable which increases ladder life cycle and reduces costs.
Large 14" x 17" embossed platform helps provide a comfortable, slip-resistant work surface on which to stand.
HEIGHT 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Also available in
Fiberglass
1-866-433-0027
Also available in
Fiberglass
18
UNEXTENDED 8 5 10 5 12 5 14 5 16 5 18 5 20 5
EXTENDED 13 5 17 5 21 5 25 5 29 5 33 5 37 5
www.CoreTerminalProducts.com
Rope Handrails
MODEL SGW-08 SGW-12 SGW-16 SGW-18 SGW-20 SGW-24 SGW-28 SGW-30 SGW-32 SGW-36 SGW-40 LENGTH 8 12 16 18 20 24 28 30 32 36 40 WIDTH 24 24 24 24 24 24 24 24 24 24 24 PRICE $1,648 $1,814 $2,069 $2,120 $2,333 $2,608 $3,114 $3,326 $3,498 $3,921 $4,364
Aluminum Handrails
MODEL SGW-08-1 SGW-12-1 SGW-16-1 SGW-18-1 SGW-20-1 SGW-24-1 SGW-28-1 SGW-30-1 SGW-32-1 SGW-36-1 SGW-40-1 LENGTH 8 12 16 18 20 24 28 30 32 36 40 WIDTH 24 24 24 24 24 24 24 24 24 24 24 PRICE $1,832 $2,084 $2,438 $2,598 $2,793 $3,160 $3,762 $4,018 $4,236 $4,752 $5,285
Features
Distributed load capacity of 750 lbs. Available in lengths from 12 to 40. Economical, lightweight, and portable. Available in 24 or 28 wide perforated deck walking surface with angle cleats for better traction and added safety.
19
SGB SGT
Alco-Lite's super-heavy duty marine gangways are designed and manufactured to meet the most demanding applications. Alco-Lite's marine gangways are designed and manufactured to meet the most demanding application.
Features
Bowed truss construction affords a distributed load capacity of 2000 lbs. Available in lengths from 20 to 40. Constructed of 6000 series marine grade aluminum alloy for durability. 24 wide aluminum deck plate features a slip-resistant coating and aluminum angle cleats for better traction and added safety.
Features
Constructed of 6000 series marine grade aluminum alloy for durability. 2000 lbs. distributed load capacity. 24 wide aluminum deck plate features a slip-resistant coating and aluminum angle cleats for better traction and added safety. Curved tread models available. Available with 5-1/2 rollers on dock side, allowing for variations in ships float.
1-866-433-0027
Marine Ladders
MODEL MBL-06 MBL-08 MBL-10 MBL-12 MBL-14 MBL-16 MBL-18 MBL-20 MBL-22 MBL-24 MBL-26 MBL-28 MBL-30 LENGTH 6 8 10 12 14 16 18 20 22 24 26 28 30 WIDTH 191/16 191/16 191/16 191/16 191/16 191/16 191/16 191/16 191/16 221/4 221/4 221/4 221/4 LBS. 17 23 29 35 40 46 52 58 63 69 75 81 86
Features
Available as a single rung model (MBL) or double rung model (DMBL - as shown) with or without handrails. All-aluminum construction is lightweight and resists corrosion. 11/2 O.D. serrated rungs reduce slippage hazards. Open truss construction reduces weight and wind resistance. Heavy-duty swivel safety shoes with thick rubber tread improve footing on many surfaces. Heavy-duty 11/2 aluminum Tee extrusion rail construction for greater strength and rigidity. Handrail models - handrails start 4 from the bottom of the ladder.
MODEL DMBL-06 DMBL-08 DMBL-10 DMBL-12 DMBL-14 DMBL-16 DMBL-18 DMBL-20 DMBL-22 DMBL-24 DMBL-26 DMBL-28 DMBL-30 DMBL-32 DMBL-34 DMBL-36 DMBL-38 DMBL-40
LENGTH 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
WIDTH 181/2 181/2 181/2 181/2 181/2 181/2 181/2 181/2 181/2 237/8 237/8 237/8 237/8 237/8 237/8 237/8 237/8 237/8
20
www.CoreTerminalProducts.com
Features
Meets or exceeds all applicable OSHA and/or ANSI standards. 11/2 angle feet standard. Primarily 6061-T6 marine grade alloy construction. 20 x 20 ribbed extra-sturdy work platform. 5 rigid Tilt-n-Roll casters standard. Optional towing feature available. 1 square aluminum tubing handrail available.
21
MODEL AML-03 AML-04 AML-05 AML-06 AML-07 AML-08 AML-09 AML-10 AML-11 AML-12 AML-14 AML-16
HEIGHT 3 4 5 6 7 8 9 10 11 12 14 15
PLATFORM 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20
WEIGHT 40 lbs. 50 lbs. 57 lbs. 64 lbs. 72 lbs. 77 lbs. 80 lbs. 87 lbs. 93 lbs. 101 lbs. 120 lbs. 138 lbs.
910H Series
Double-Fronted Aluminum Stepladders are designed for access from either side or for use by two people at one time. The 910-H is the perfect solution for heavy maintenance applications.
Features
Meets/exceeds OSHA and ANSI standard A14.2 requirements for Type 1-A, 300 lb. duty rating. Double-fronted to allow use on either side. Constructed primarily of 6061-T6 marine grade alloy. 11/4 angle feet with heavy-duty skid resistance pad. Tool holes in cap for added convenience. WEIGHT All parts replaceable; ladder 20 lbs. 25 lbs. can be repaired at your 30 lbs. 36 lbs. facility. 41 lbs. 5 Tilt-n-Roll casters. 47 lbs.
53 lbs. 59 lbs. 65 lbs. 72 lbs. 76 lbs. 81 lbs. 86 lbs. 91 lbs.
MODEL 900HAIR-03 900HAIR-04 900HAIR-05 900HAIR-06 900HAIR-07 900HAIR-08 900HAIR-09 900HAIR-10 900HAIR-11 900HAIR-12 900HAIR-13 900HAIR-14 900HAIR-15 900HAIR-16
HEIGHT 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1-866-433-0027
Features
Heavy-duty rubber bumper pads are curved to rest on wing. Aluminum construction. Swivel safety shoes. Handle for easy carrying. 8 height - to match up to MD-80 wing. Different sizes available to match other models of aircraft.
MODEL DI-08 HEIGHT 8 WIDTH 28 WEIGHT 48 lbs.
22
Features
Meets/exceeds ANSI and OSHA standards. All-aluminum, channel rail construction for strength, durability and light weight. Thick rubber bumpers to protect fuselage and hatch from scratches. 11/4" slip-resistant rungs. Swivel type shoes. 300 lb. duty rating. Field repairable.
www.CoreTerminalProducts.com
See Page 3
See Page 4
See Page 3
See Page 2
1-866-433-0027
www.CoreTerminalProducts.com