Professional Documents
Culture Documents
Chap 1
Chap 1
Chapter 1
August 1999
1 Limits
The study of calculus is essentially the study of the use of limits. Over the entire calculus sequence, you will see the
notion of limit developed to study rates of change (the derivative, which we will study in this course), the area problem
(the integral) and approximation (sequences and series). The triumph of Newton and Liebniz is largely the recognition
of the intimate connections between these seemingly different ideas. Let’s take a quick look at examples that illustrate
what a limit is.
If we consider the sequence of numbers
1, 1/2, 1/3, 1/4, ..., 1/n, ...
it is clear that the farther out in this sequence we progress, the smaller the numbers become. In fact, given any positive
number c, by choosing a point far enough out in the sequence, we can guarantee that all terms in the remainder of the
sequence will be smaller than c. We say that the sequence has a limit of zero, even though no term of the sequence
will ever be 0.
If f is a function, we say that the limit of f as x approaches a is L, written
lim f (x) = L
x→a
if, given any c > 0, we can find a d > 0 so that, for all x satisfying |x − a| < d, |f (x) − L| < c.
So, in the example above, we write
1
lim = 0.
n→∞ n
1
This is very close to (but not quite) 2. Will there ever be enough terms to exceed 2? To see that the answer is no, we
will use the following formula from algebra.
(1 − xn )
(1 + x + x2 + x3 + ... + x(n−1) ) =
1−x
In our case, we are interested in x = 1/2. So,
1 1 1 1 − 1/2n
1+ + + ... + n−1 =
2 4 2 1 − 1/2
1
= 2 1− n
2
But, as we add more and more terms, the sum gets closer and closer to 2, since 1/2n ; gets closer and closer to 0 as n
gets large. We therefore say that the limit as n goes to infinity of the sum
1 1 1
1+ + + ... + n
2 4 2
is 2, or more compactly,
1 1 1
lim 1 + + + ... + n = 2.
n→∞ 2 4 2
It appears that, as we take smaller and smaller time intervals, the average speed approaches 32. We are therefore
led to conclude that the speed at the end of 1 second is 32 feet/second.
2
4 More on speed
Here is a function which will compute the average speed of an object in free fall between two times s and t.
16s2 − 16t2
V (s, t) =
s−t
Use this to determine the speed at the end of 2 and 3 seconds. What do you think the general case is? Using algebra,
justify your answer. Note that
16s2 − 16t2 s2 − t2
= 16
s−t s−t
(s − t) (s + t)
= 16
s−t
= 16 (s + t) , for s 6= t.
The tangent line coincides with the graph of y = sin x at the point (π/6, 1/2), and at that point, has the same
slope. But, how does one compute the slope of the tangent line at a point? You can probably guess that this will have
something to do with the notion of limit. Let’s start by computing slopes of lines passing through distinct points on
the graph of the function. (These lines are called secant lines.)
Recall from your algebra class that the slope of a line passing through two points (x0 , y0 ) and (x1 , y1 ) is given by
y1 − y0
m= .
x1 − x0
Once we have computed the slope, the equation of the line is
y − y0 = m(x − x0 ).
3
In our example, we will want to use the point (π/6, 1/2) as one of the points, and another point, which we will vary,
will have the form (x, sin x). So, we can compute the slope of the desired secant line as
sin x − 1/2
m = m(x) =
x − π/6
Now we want to ask, what happens as x gets close to√π/6? Use the above formula to compute the slope for several
values of x close to π/6, and compare your results to 3/2 ≈ .8660, the true slope of the tangent line.
Formally, we are attempting to compute the limit as x approaches π/6 of m(x), that is,
lim m(x)
x→π/6
We want to be able to determine the exact value, however, not just approximations as above.
In order to handle this sort of problem efficiently, we need to develop some theory and rules for determining limits.
That is the next order of business.
lim x2 .
x→1
From a plot of y = x2
it seems fairly obvious that the closer x gets to 1, the closer x2 gets to 1, which is of course simply the value of
2
x at x = 1. We want to emphasize that, though in many cases a limit may not be so easy to determine, we insist that
our formal procedures comfirm our intuition in this example. (By the way, we will say that the function f (x) = x2 is
continuous.)
Def: We say that the function f is continuous at x = a if
Let’s look at another example. Suppose that we want to consider what happens to the expression
x2 − 9
x−3
4
as x gets close to 3. Note that, at x = 3, the expression makes no sense (it has the form 0/0, which is undefined).
However, for values of x other than 3,
x2 − 9 (x − 3) (x + 3)
= = (x + 3)
x−3 x−3
and it is clear that, as x gets close to 3, x + 3 gets close to 6. We therefore conclude that
x2 − 9
lim = lim (x + 3)
x→3 x − 3 x→3
= 6
lim g(x) = L
x→a
then
lim f (x) = L.
x→a
Limits are not always finite. For example, the function f (x) = 1/x2 is undefined at x = 0, but it’s behaviour near
0 is still predictable: as x gets close to 0, f (x) gets bigger and bigger. We formalize this by saying that
1
lim = ∞.
x→0 x2
On the other hand, the function g(x) = 1/x also has predictable behaviour near 0, but that behaviour depends on
whether x > 0 or x < 0. This points to a need for one sided limits. We will say that the limit of 1/x as x approaches
0 from the right is ∞, written
1
lim = ∞,
x→0+ x
and the limit of 1/x as x approaches 0 from the left is −∞, written
1
lim = −∞
x→0− x
5
The behaviour of sin(1/x) is erratic near x = 0. However, the sine function is bounded above by 1, and bounded
below by −1. So, we will always have
− |x| ≤ x sin (1/x) ≤ |x|
Since
lim |x| = lim (− |x|) = 0,
x→0 x→0
we will also have
lim x sin (1/x) = 0.
x→0
This is the pinching or squeeze theorem.
Formally, we have: If f (x) < g(x) < h(x),
lim f (x) = L, and
x→a
lim h(x) = L,
x→a
Note that there are different categories of discontinuities. For example, while the function
x2 − 9
f (x) =
x−3
is not continuous at x = 3 (it is not even defined there),
x2 − 9
lim f (x) = lim
x→3 x→3 x − 3
(x − 3) (x + 3)
= lim
x→3 x−3
= lim (x + 3)
x→3
= 6
6
And, a plot of f should look like the graph of the line y = x + 3, with a hole at x = 3.
x2 −9
Figure 3: Graph of f (x) = x−3 on the interval [0, 6].
This kind of discontinuity is called a removable discontinuity, because we can redefine the function at a single
point and produce a continuous function.
On the other hand, the function g(x) = 1/x has a vertical asymptote at x = 0. This type of discontinuity is called
an infinite discontinuity, or pole.
Finally, we have functions such as h(x) = x / |x|. Note that, if x < 0, h(x) = −1, while h(x) = 1 for x > 0.
(Plot it.) This type of discontinuity is called a jump discontinuity.