Professional Documents
Culture Documents
BeanDevice AX-3D
BeanDevice AX-3D
BeanDevice AX-3D
SmartSensor
BeanDevice AX-3D main presentation video Tri-Axial : 2g, 10g, 13g Anti-Aliasing Filter 5th
Streaming 3 kSPS
IEEE 802.15.4
Antenna Diversity
Applications
Dynamic measurement on embedded equipment Vibration analysis Inertial measurement Movement and Shock detection Structural health monitoring
Main Features
Wireless Triaxial accelerometer based on MEMS Technology Measurement range (4 versions): 2g, 10g, 13g Very Low noise Density: 45 g/Hz ( 2g version), 100 g/Hz ( 10g and 13g version). Excellent radio link relying on the radio antenna diversity developed by Beanair Non contact actuation for faster installation Streaming packet mode: 3 KSPS (mono-channel) Maximum Radio Range : 500 m (L.O.S) Ultra-Power radio Technology IEEE 802.15.4 Current consumption in sleeping mode : < 30 A Embedded Datalogger : up to 1 000 000 data acquisition records (with events dating) Entirely autonomous system with an integrated Lithium-Ion battery charger Anti-aliasing Butterworth filter (5th order) with a cut-off frequency of 1 Hz to 2 KHz (remotely programmable from the BeanScape) Watertight aluminium enclosure IP66 (dimensions L x l x h : 80x55x21 mmweight 145g rechargeable battery included) suitable for Harsh Industrial Environment Free Scilab scripts for FFT and PPV filtering
AX-3D Version
SmartSensor
AX-3D Version
SmartSensor
Remote configuration and monitoring
The BeanScape application allows the user to view all the data transmitted by the BeanDevice AX-3D With the OTAC (Over-the-Air configuration) feature, the user can remotely configure the BeanDevice AX-3D. Several data acquisition modes are available on the BeanDevice AX-3D : Low Duty Cycle Data Acquisition mode (LDCDA): the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. Alarm Mode : the measured value is transmitted by radio whenever an alarm threshold (fixed by the user) is detected (4 alarm threshold levels High/Low). Survey Mode : operates like the Alarm mode but the device sends frequently a beacon frame informing its current status.
*Over-the-Air Configuration
OTAC*
AX-3D
Streaming Packet Mode: all measured values are transmitted by packet within a continuous flow at 5000 samples per second maximum Streaming Mode: all measured values are transmitted in real-time within a continuous flow at 100 samples per second maximum Math Mode : Values such as the mean value, minimum value, maximum value and standard deviation are calculated on sample time series and transmitted by radio .
Antenna Diversity
While the vast majority of wireless sensors shows their limits in harsh industrial environment, the BeanDevice AX-3D integrates an innovative antenna diversity design, allowing to optimize the radio link quality in environments subject to random and diverse disturbance. Antenna diversity improves both the quality and reliability of a wireless link by 30%.
AX-3D Version
SmartSensor
Embedded Data Logger up to 1,000,000 data acquisition records
The BeanDevice AX-3D integrates an embedded Datalogger, which can be used to log data when a Wireless Sensor network can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway when a Wireless Sensor Network is established. The Datalogger feature is compatible with all the data acquisition mode available on your BeanDevice AX-3D : LowDutyCycle Data Acquisition Alarm Math Streaming & Streaming packet ( maximum data rate : 1 Ksamples per second for each axis)
The BeanDevice AX-3D is configured with its Datalogger feature. A standalone installation of the BeanDevice AX-3D will be done on the windmills blades, without the necessity to be connected to the BeanGateway. Once the blades starts rotating, each data is recorded on the embedded flash. When the windmill is for maintenance, a technician working on the site can send a request for a log transmission. Then the BeanDevice AX-3D starts sending all its logs . If all the logs are sucessfully transmitted to the BeanGateway, the flash memory is erased and new logs will be recorded.
AX-3D Version
SmartSensor
Product reference
BND-AX3D -NG WP N Measurement Range: - 2 : 2g measurement range - 10 : 10g measurement range WP Wireless Technology - IEEE : IEEE 802.15.4 (2006)
- 13: 13g measurement range Example: BND-AX3D-10G-IEEEWireless Accelerometer with 10g measurement range , IEEE 802.15.4 Wireless Technology
Accelerometer Specifications
Accelerometer technology Sensitivity Typical non-linearity Analog to Digital converter Sensor frequency response (-3 dB) Noise spectral density MEMS technology triaxial accelerometer 2g Version : 16384 counts/g 10g version: 3277 counts/g 13g version: 2521 counts/g 0.1% FS 16-bits, SAR architecture (Successive Approximation Register) with temperature compensation 0 to 800 Hz 2g Version : 45 g/Hz 10g version: 100 g/Hz 13g version: 100 g/Hz 2g Version : 0.2 mg/C 10g version: 0.1 mg/C 13g version: 0.1 mg/C 2g Version : 0.01 %/C (XY) , 0.02 %/C (Z) 10g version: 0.01 %/C 13g version: 0.01 %/C 2g Version : 4mg 10g version: 0.2% (XY) , 0.1% (Z) 13g version: 0.5% 2g Version : 1.25 % (X-Y) , 0.2 % (Z) 10g Version : 1.6% (X-Y) , 0.2 % (Z) 13g Version : 1.6% (X-Y) , 0.2 % (Z)
Zero-g Offset Variation from RT over Temp Sensitivity Variation from RT over Temp
2% Butterworth 5th order filter cut-off frequency : 1 Hz to 2000 Hz remotely programmable (BeanScape)
RF Specifications
Wireless Protocol Stack WSN Topology Encryption Data rate RF Characteristics TX Power Receiver Sensitivity Maximum Radio Range Antenna
IEEE 802.15.4 (2006 version) Point-to-Point / Star AES 128 bits (AES integrated coprocessor) 250 Kbits/s ISM 2.4GHz 16 Channels. Antenna diversity architecture designed by Beanair +0 dBm to +18 dBm -95.5 dBm to -104 dBm 500m (L.O.S) Antenna diversity : 2 omnidirectional antenna with a gain of 2,2 dBi
AX-3D Version
SmartSensor
Over-the-air configuration (OTAC) parameters Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour Alarm & Survey mode: 1s to 24 hour Math Mode : 3 kSPS maximum Streaming Packet Mode: 3 kSPS maximum Streaming Mode: 100 SPS maximum Minimum: 1 SPS Maximum: 3 kSPS maximum (one channel activated), 1,5 kSPS (2-channels activated), 1 kSPS (3 channels activated) 2 high levels alarms & 2 low levels alarms 1 2000 Hz Sleeping, Sleeping with Network Listening & Active -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm Others specifications Embedded logger Real Time Clock Storage Capacity : up to 1 000 000 data acquisition Integrated real time clock Write/read Cycle: 400 000 Extremely Accurate Real Time Clock for measurement timestamping Integrated Lithium-ion battery charger with high precision battery monitoring : Overvoltage Protection, Overcurrent/Short-Circuit Protection, Undervoltage Protection Battery Temperature monitoring Current accumulation measurement During data acquisition : 20 to 30 mA During Radio transmission : 40 mA @ 0dBm , 80 mA @ 18 dBm During sleeping : < 30 A Industrial temperature : -40 C to +85 C Aluminium & Watertight (IP66) enclosure Dimensions in mm (LxWxH): 80x55x21 mm, Weight (battery included) : 145g 100g during 50 ms CE Labelling Directive R&TTE (Radio) ETSI EN 300 328 ROHS - Directive 2002/95/EC External power supply : +8v to +28v High density Lithium-Ion rechargeable battery with a capacity of 1.3 Ah (referenced as BAT1.3DMG) Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67) Screw mounting
Sampling Rate (in streaming packet mode) Alarm Threshold Programmable Cut-off frequency (Anti-aliasing filter) Power Mode TX Power
Current consumption @ 3,3V Operating Temperature Enclosure Shock resistance Norms External power supply Rechargeable battery Power-supply bloc (Option) Mechanical mounting (Option)
Product specifications are subject to change without notice. Contact Beanair for latest specifications.
MADE IN FRANCE
AX-3D Version
SmartSensor
Indoor Version
AX-3D
OR
Outdoor Version
Description
Starterkit Wireless Accelerometer 1x BeanGateway Ethernet (Indoor version) 1x BeanDevice AX-3D-XXG-IEEE* 1x Beanscape Basic 1x Scilab Scripts for Digital Signal Processing (FFT and PPV Filtering) *XX = 2g, 10g, 13g Starterkit Wireless Accelerometer 1x BeanGateway Ethernet (Outdoor version) 1x BeanDevice AX-3D-XXG-IEEE* 1x Beanscape Basic 1x Scilab Scripts for Digital Signal Processing (FFT and PPV Filtering) *XX = 2g, 10g, 13g
SK_AX_3D_XXG_IND
SK_AX_3D_XXG_OUT
The BeanDevice AX-3D operates only on our Wireless Sensor Networks , you will need the BeanGateway and the BeanScape for starting a wireless sensor Networks.