Professional Documents
Culture Documents
Installing PowerMill 2010
Installing PowerMill 2010
Support Document
PowerMill 2010 Installation
1) Place the DVD in drive. It should auto run. Make sure you have exited out of all Delcam products. 2) Please remember to unplug your USB dongle when installing any Delcam product. 3) On a 64 bit computer, you have to choose what version to install. We recommend installing the 64 bit version.
Page 1 of 5
CadCamSystems
5291 28 Avenue
th
Rockford, IL 61109
815-399-4433
Fax 815-399-4491
www.cadcamsystemsinc.com
August 20, 2010 Revision: A 5) DO NOT CHANGE LOCATION. Changing this location could affect how your software runs.
6)
Page 2 of 5
CadCamSystems
5291 28 Avenue
th
Rockford, IL 61109
815-399-4433
Fax 815-399-4491
www.cadcamsystemsinc.com
8) OPTIONAL - If you do NOT have a full seat of PowerShape on this computer, select PowerMILL Modeling. This will give you advanced access to editing patterns and boundaries in PowerMill.
9) OPTIONAL - If you do not have Exchange 2010 installed, please select this option. This gives you the ability to import files into PowerMILL.
Page 3 of 5
CadCamSystems
5291 28 Avenue
th
Rockford, IL 61109
815-399-4433
Fax 815-399-4491
www.cadcamsystemsinc.com
10) NEEDED - Select both options under Toolpath Output. This will give you the ablity to post CNC code from PowerMILL using Ductpost or Postprocessor.
11) NEEDED - Under Utilities, select the PAFWizard. This will install the PAFWizard 2010. This will enable CCSI to diagnose support issues. You can also update your PAFs using this program.
12) Select Install to install the software on your computer. 13) Software is installed.
Page 4 of 5
CadCamSystems
5291 28 Avenue
th
Rockford, IL 61109
815-399-4433
Fax 815-399-4491
www.cadcamsystemsinc.com
August 20, 2010 Revision: A 14) Plug the USB dongle back in. 15) Check for updates to get the latest service pack. Start PowerMill and under the Help pull down menu, select Check for Updates. Follow directions in the dialog box. You need to have Internet access to do this.
Or you can download software updates from the Cad Cam Systems FTP site. We have instructions on how to get there on the Answer Page section of our website www.cadcamsystemsinc.com
Versions of software on this DVD: PowerMill 2010 (11.0.12.XX.1129222) PS-Exchange 2010 Ductpost 1.5.16 PAFWizard 2010 PMPost 2010 SP1 Sentinel 7.5.0
Page 5 of 5
CadCamSystems
5291 28 Avenue
th
Rockford, IL 61109
815-399-4433
Fax 815-399-4491
www.cadcamsystemsinc.com