Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

MANUAL

BLC AWB

CCD
www.provision-isr.com

Digital CCTV Camera


DOME CAMERA

Auto Iris

www.provision-isr.com

General Thank you for using our products. Before use, please read this manual carefully to ensure correct use of this series of products. Please keep the manual properly for future use. This series of cameras take high-sensitivity CCD as the image sensor, all circuits have long work life and high reliability. Excellent image will be top choice for your camera. Main Features 1.Easy to install and assemble. 2.High resolution, high sensitivity and high s/n ratio. 3.Low illumination, high quality image. 4.CCD sensor can prolong the work life of camera. 5.With SONY DSP and CCD chip, image is clear and stable. Notices 1.Do not operate the camera under improper sun or strong light. 2.Do not expose the camera in rain or dusty surroundings. 3.Please use correct power 4.Do not touch the CCD surface with finger. If cleaning is in need, please wipe it using soft cloth with a little of alcohol. 5.In order to prevent the camera from damaging, be careful shock use to avoid strong shock. 6.Only professional and qualified technician can install and test this camera. 7.During use, if any errors occur, cut off the power immediately and contact your local distributor.
1

WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN

Note: Only professional technicians is allowed to open the front or back cover of this camera.

Note: In order to avoid electrical shock or re, please use proper power according to the manual.

Structure and Components


Video Cable

1 2

Lens

Color Camera AES Auto Electronic Shutter Switch (Auto) BLC Backlight Compensation Switch (Auto) AGC Auto Gain Control Switch (Auto) AWB Auto White Balance Switch (Auto) Video Cable: Power Supply Socket Video out 2

Operation Steps Confirm that the power supply for the camera is correct; Connect 1 Power Supply Socket to the power supplier. Connect "Video Out" 2 of the camera to the monitor or other video equipment (DVR) with a 75 ohm cable (RG59).
System connection
Monitor

Camera Speci cation


DA-352CS
1/3 SONY Super HAD CCD SONY HQ1 SONY DSP Chipset

DA-322CS

PAL:795(H)x596(V) NTSC:811(H)x508(V) 540TVL

PAL:537(H)597(V) NTSC:537(H)505(V) 420TVL 0.05 LUX/F2.0

BNC BNC

0.02 LUX/F2.0

DC 12V

AWB / ATW 0

Use one camera and one monitor


Monitor

5
MULTIPLEXER Video Divider

VCN

DVR

150W x 110H mm 1250g

Use Several Cameras and one Monitor

Camera Speci cation


DX-322CS
1/3 SONY Super HAD CCD

Camera Speci cation


DX-425CS
1/4 SONY CCD

DX-352CS
1/3 SONY Super HAD CCD SONY HQ1 DSP Chipset

SONY DSP Chipset

PAL:537(H)597(V) / NTSC:537(H)505(V)

PAL:795(H)x596(V) / NTSC:811(H)x508(V) 540TVL

0.05 LUX/F1.2

0.5 LUX/F1.2

0.02 LUX/F1.2

AWB ON (ATW OFF PUSH) Switchable 0

AWB ON (ATW OFF PUSH) Switchable 0

3.6/4/6/8mm Board Lens

3.6/4/6/8mm Board Lens

84W x 53H mm 280g

100W x 80H mm 280g

Camera Speci cation


DI-355CSVF DI-325CSVF
1/3 SONY Super HAD SONY HQ1 SONY DSP Chipset

Camera Speci cation


DI-355CS(FL) DI-325CS(FL)
1/3 SONY Super HAD SONY HQ1 SONY DSP Chipset

PAL:795(H)x596(V) NTSC:811(H)x508(V) 540TVL

PAL:537(H)597(V) NTSC:537(H)505(V) 420TVL

PAL:795(H)x596(V) NTSC:811(H)x508(V) 540TVL

PAL:537(H)597(V) NTSC:537(H)505(V) 420TVL

0.5 LUX/F2.0 (0 Lux IR On)

0.5 LUX/F2.0 (0 Lux IR On)

Auto Tracking White Balance

36PSC 4-9mm Vari-focal Lens 30m DC12V / 110mA

24PSC 3.6/4/6/8mm Board Lens 20m DC12V / 110mA

94W x 69H mm 300g

94W x 69H mm 300g

Camera Speci cation


DI-355CS(P) DI-325CS(P)
1/3 SONY Super HAD SONY HQ1 SONY DSP Chipset

Camera Speci cation


CM-325CS 1/3 SONY Super HAD CCD SONY DSP chipset

PAL:795(H)x596(V) NTSC:811(H)x508(V) 540TVL

PAL:537(H)597(V) NTSC:537(H)505(V) 420TVL

PAL:537(H)597(V) / NTSC:537(H)505(V)

0.5 LUX/F2.0 (0 Lux IR On)

10 Big Leds 3.6/4/6/8mm Board Lens 15m DC12V / 110mA -10C - +50C 100W x 65H mm 150g

12 PSC 3.6/4/6/8mm Board Lens 15M 11

55W x 85H x 85L 130g

10

Camera Speci cation


DX-322CP36(BJ)
1/3 CCD PROVISION DSP Chipset PAL / NTSC PAL:537H x 597V NTSC:537H x 505V

Camera Speci cation


DI-322CP36(P)
Image Sensor DSP System TV System Effective Pixels Horizontal Resolution Minimum Illumination
0.5 LUX/F1.2 More than 48dB 1.0Vp p composite video signal 75 AWB 1/50 ~ 1/100,000 0.45 Internal Video/DC Switchable 3.6mm Board Lens / 3 Axis system DC 12V / 110mA -10 to 50 90W x 60H mm 280g

1/3 CCD PROVISION DSP Chipset 420TVL


PAL:537H x 597V / NTSC:537H x 505V

420TVL 0.5 Lux (0 Lux IR On) 3.6mm More than 48dB


1/60(1/50)~1/100,000 sec 0.45 Auto Auto Internal 1.0Vp p composite video signal 75

Lens Mount S/N Ratio Electronic Shutter Gamma Modification Gain Control White Balance Synchronous System Video Output Leds Number Infra Lamps Control Operating Temperature Power Supply Dimensions Weight

10 Big Leds / 15m Day/night Turn off/on Automatic


-10 to 50

DC12V / 110mA 100x65mm 150g

11

12

You might also like